2021 Minnesota Statutes

CHAPTER 326B. CONSTRUCTION CODES AND LICENSING

GENERAL

326B.01 DEFINITIONS.

Subdivision 1.Scope.

The definitions in this section apply to this chapter.

Subd. 2.ASME.

"ASME" means the American Society of Mechanical Engineers.

Subd. 3.Commissioner.

"Commissioner" means the commissioner of labor and industry or a duly designated representative of the commissioner who is either an employee of the Department of Labor and Industry or a person working under contract with the department.

Subd. 4.Department.

"Department" means the Department of Labor and Industry.

Subd. 5.Day.

"Day" means calendar day unless otherwise provided.

Subd. 6.Individual.

"Individual" means a human being.

Subd. 7.Person.

"Person" means any individual, limited liability company, corporation, partnership, incorporated or unincorporated association, sole proprietorship, joint stock company, or any other legal or commercial entity.

History:

2007 c 140 art 2 s 2

326B.02 POWERS.

Subdivision 1.Transfer of responsibilities.

The responsibilities of the commissioner of administration relating to the State Building Code, sections 16B.59 to 16B.76; construction of low-cost manufactured home park storm shelters, section 327.205; manufactured homes, sections 327.31 to 327.36 and 327B.01 to 327B.12; and statutory warranties in connection with the sale of dwellings and home improvement work, chapter 327A, are transferred under section 15.039 to the commissioner of labor and industry as amended and recodified in this chapter. The responsibilities of the commissioner of health relating to the State Plumbing Code and licensing, sections 16B.61, 144.99 to 144.993, and 326.37 to 326.45, and water conditioning contractors and installers, sections 326.57 to 326.65, are transferred under section 15.039 to the commissioner of labor and industry as amended and recodified in this chapter except for responsibilities transferred to the Plumbing Board as expressly provided in this chapter. The responsibilities of the commissioner of commerce relating to residential contractors, residential remodelers, residential roofers, manufactured home installers, and the contractor's recovery fund under sections 45.027 to 45.23 and 326.83 to 326.992 are transferred under section 15.039 to the commissioner of labor and industry as amended and recodified in this chapter. The responsibilities of the Board of Electricity relating to the State Electrical Code and licensing, sections 16B.61 and 326.241 to 326.248, are transferred under section 15.039 to the commissioner of labor and industry as amended and recodified in this chapter except for responsibilities transferred to the Board of Electricity as expressly provided in this chapter.

Subd. 2.Transfer of authority.

The commissioner of administration may not use the authority under section 16B.37 to modify the transfers of authority to the Plumbing Board, the Board of Electricity, or the Board of High Pressure Piping Systems under this chapter.

Subd. 3.Definition of responsibilities.

For purposes of subdivision 1, responsibilities include powers, duties, rights, obligations, and other authority imposed by law.

Subd. 4.State fire marshal cooperation.

The state fire marshal shall work with the commissioner to improve the delivery of services to the public through the coordination of services and utilization of technology.

Subd. 5.General rulemaking authority.

The commissioner may, under the rulemaking provisions of chapter 14 and as otherwise provided by this chapter, adopt, amend, suspend, and repeal rules relating to the commissioner's responsibilities under this chapter, except for rules for which the rulemaking authority is expressly transferred to the Plumbing Board, the Board of Electricity, or the Board of High Pressure Piping Systems.

Subd. 6.State Fire Code rulemaking authority.

The commissioner of labor and industry, consistent with the recommendations of the state fire marshal, shall adopt a State Fire Code and make amendments thereto in accordance with the Administrative Procedure Act in chapter 14. The code and its amendments shall conform insofar as practicable to model fire codes generally accepted and in use throughout the United States, with consideration given to existing statewide specialty codes presently in use in the state of Minnesota. Statewide specialty codes and model codes with necessary modifications may be adopted by reference in accordance with section 14.07, subdivision 4.

History:

1974 c 550 s 1; 1978 c 777 s 1; 1981 c 106 s 1; 1982 c 424 s 114,130; 1984 c 544 s 89; 1984 c 654 art 5 s 58; 1984 c 658 s 3; 1985 c 248 s 70; 1986 c 444; 1Sp1986 c 3 art 4 s 10; 1987 c 201 s 1-3; 1987 c 333 s 22; 1990 c 388 s 1; 1991 c 149 s 3; 1991 c 235 art 3 s 2; 1992 c 513 art 9 s 33; 1992 c 597 s 16; 1993 c 327 s 16; 2002 c 220 art 7 s 13; 2005 c 136 art 9 s 4,14; 2006 c 260 art 3 s 19; 2007 c 140 art 2 s 1,3; art 3 s 6; art 4 s 61; art 7 s 13; art 13 s 4; 2008 c 337 s 4,64

326B.04 DEPOSIT OF MONEY.

Subdivision 1.Construction code fund.

There is created in the state treasury a construction code fund as a special revenue fund for the purpose of administering this chapter, sections 327.31 to 327.36, and chapter 327B. All money collected under those sections, except penalties, is credited to the construction code fund unless otherwise specifically designated by law. Any interest or profit accruing from investment of these sums is credited to the construction code fund. All money collected in the construction code fund is appropriated to the commissioner of labor and industry to administer and enforce the provisions of the laws identified in this section.

Unless otherwise provided by law, all penalties assessed under this chapter, section 327.35, and chapter 327B are credited to the assigned risk safety account established by section 79.253.

Subd. 2.Deposits.

Unless otherwise specifically designated by law: (1) all money collected under sections 144.122, paragraph (f); 181.723; 326B.092 to 326B.096; 326B.101 to 326B.194; 326B.197; 326B.32 to 326B.399; 326B.43 to 326B.49; 326B.52 to 326B.59; 326B.701; 326B.802 to 326B.885; 326B.90 to 326B.998; 327.31 to 327.36; and 327B.01 to 327B.12, except penalties, is credited to the construction code fund; (2) all fees collected under sections 326B.098 to 326B.099 in connection with continuing education for any license, registration, or certificate issued pursuant to this chapter are credited to the construction code fund; and (3) all penalties assessed under the sections set forth in clauses (1) and (2) and all penalties assessed under sections 144.99 to 144.993 in connection with any violation of sections 326B.43 to 326B.49 or 326B.52 to 326B.59 or the rules adopted under those sections are credited to the assigned risk safety account established by section 79.253.

History:

2007 c 135 art 3 s 28; 2007 c 140 art 2 s 4; art 4 s 61; art 6 s 15; art 7 s 13; art 8 s 30; art 13 s 4; 2008 c 337 s 64; 2010 c 280 s 9; 1Sp2011 c 4 art 3 s 3; 2015 c 21 art 1 s 73

326B.06 BONDS.

Bonds issued under this chapter are not state bonds or contracts for purposes of sections 8.05 and 16C.05, subdivision 2.

History:

2007 c 140 art 2 s 5

326B.07 CONSTRUCTION CODES ADVISORY COUNCIL.

Subdivision 1.Membership.

(a) The Construction Codes Advisory Council consists of the following members:

(1) the commissioner or the commissioner's designee representing the department's Construction Codes and Licensing Division;

(2) the commissioner of public safety or the commissioner of public safety's designee representing the Department of Public Safety's State Fire Marshal Division;

(3) one member, appointed by the commissioner, with expertise in and engaged in each of the following occupations or industries:

(i) certified building officials;

(ii) fire chiefs or fire marshals;

(iii) licensed architects;

(iv) licensed professional engineers;

(v) commercial building owners and managers;

(vi) the licensed residential building industry;

(vii) the commercial building industry;

(viii) the heating and ventilation industry;

(ix) a member of the Plumbing Board;

(x) a member of the Board of Electricity;

(xi) a member of the Board of High Pressure Piping Systems;

(xii) the boiler industry;

(xiii) the manufactured housing industry;

(xiv) public utility suppliers;

(xv) the Minnesota Building and Construction Trades Council;

(xvi) local units of government;

(xvii) the energy conservation industry; and

(xviii) building accessibility.

(b) The commissioner or the commissioner's designee representing the department's Construction Codes and Licensing Division shall serve as chair of the advisory council. For members who are not state officials or employees, compensation and removal of members of the advisory council are governed by section 15.059. The terms of the members of the advisory council shall be four years. The terms of eight of the appointed members shall be coterminous with the governor and the terms of the remaining nine appointed members shall end on the first Monday in January one year after the terms of the other appointed members expire. An appointed member may be reappointed. Each council member shall appoint an alternate to serve in their absence.

Subd. 2.Duties of council.

The council shall review laws, codes, rules, standards, and licensing requirements relating to building construction and may:

(1) recommend ways to eliminate inconsistencies, to streamline construction regulation and construction procedures, and to improve procedures within and among jurisdictions;

(2) review and comment on current and proposed laws and rules to promote coordination and consistency;

(3) advise agencies on possible changes in rules to make them easier to understand and apply; and

(4) promote the coordination, within each jurisdiction, of the administration and enforcement of construction codes.

The council shall meet a minimum of four times each year. The council shall report its findings and recommendations to the commissioner. The council shall recommend changes in laws or rules governing building construction. The council shall establish subcommittees to facilitate its work. If the council establishes subcommittees, it shall include in their memberships representation from entities and organizations expressing an interest in membership. The commissioner shall maintain a list of interested entities and organizations.

Subd. 3.Agency cooperation.

State agencies and local governmental units shall cooperate with the council and, so far as possible, provide information or assistance to it upon its request. The commissioner shall provide necessary staff and administrative support to the council.

History:

2007 c 140 art 4 s 27,61; art 13 s 4; 2008 c 337 s 64; 2014 c 286 art 8 s 38; 1Sp2021 c 10 art 3 s 6

326B.075 COMMISSIONER NOT SUBJECT TO SUBPOENA.

The commissioner shall not be subject to subpoena for purposes of providing expert testimony, except in an enforcement proceeding brought by the commissioner.

History:

2007 c 140 art 2 s 6

ENFORCEMENT

326B.081 DEFINITIONS.

Subdivision 1.Application.

For purposes of sections 326B.081 to 326B.085, the terms defined in this section have the meanings given them.

Subd. 2.Administrative order.

"Administrative order" means an order issued under section 326B.082, subdivision 7.

Subd. 3.Applicable law.

"Applicable law" means the provisions of sections 181.723, 325E.66, 327.31 to 327.36, this chapter, and chapter 341, and all rules, orders, stipulation agreements, settlements, compliance agreements, licenses, registrations, certificates, and permits adopted, issued, or enforced by the department under sections 181.723, 325E.66, 327.31 to 327.36, this chapter, or chapter 341.

Subd. 4.Document or documents.

"Document" or "documents" includes papers; books; records; memoranda; data; contracts; drawings; graphs; charts; photographs; digital, video, and audio recordings; records; accounts; files; statements; letters; e-mails; invoices; bills; notes; and calendars maintained in any form or manner.

Subd. 5.Final.

"Final" when used to describe any order issued under section 326B.082 means that:

(1) no request for hearing in connection with the order was filed in the manner and within the time provided by section 326B.082;

(2) all requests for hearing have been withdrawn;

(3) an agreement that resolves the order has been signed by all the parties; or

(4) after the filing of a request for hearing, an order has been issued by the commissioner, the court of appeals, or the supreme court, and all appeals have been pursued or forgone.

Subd. 6.Licensing order.

"Licensing order" means an order issued under section 326B.082, subdivision 12, paragraph (a).

Subd. 7.Minimum qualifications.

"Minimum qualifications" means the educational, experience, fee, examination, application, and other eligibility requirements that an applicant must meet in order to obtain a license, registration, certificate, or permit under the applicable law. For an applicant that is not an individual, the minimum qualifications include the requirement that an employee or other individual associated with the applicant hold a license.

Subd. 8.Stop order.

"Stop order" means an order issued under section 326B.082, subdivision 10.

History:

2007 c 140 art 3 s 1; 2012 c 248 s 2; 2012 c 295 art 2 s 12; 2013 c 85 art 2 s 4

326B.082 ENFORCEMENT.

Subdivision 1.Remedies available.

The commissioner may enforce all applicable law under this section. The commissioner may use any enforcement provision in this section, including the assessment of monetary penalties, against a person required to have a license, registration, certificate, or permit under the applicable law based on conduct that would provide grounds for action against a licensee, registrant, certificate holder, or permit holder under the applicable law. The use of an enforcement provision in this section shall not preclude the use of any other enforcement provision in this section or otherwise provided by law.

Subd. 2.Access to information and property; subpoenas.

(a) In order to carry out the purposes of the applicable law, the commissioner may:

(1) administer oaths and affirmations, certify official acts, interview, question, take oral or written statements, and take depositions;

(2) request, examine, take possession of, test, sample, measure, photograph, record, and copy any documents, apparatus, devices, equipment, or materials;

(3) at a time and place indicated by the commissioner, request persons to appear before the commissioner to give testimony and produce documents, apparatus, devices, equipment, or materials;

(4) issue subpoenas to compel persons to appear before the commissioner to give testimony and produce documents, apparatus, devices, equipment, or materials; and

(5) with or without notice, enter without delay upon any property, public or private, for the purpose of taking any action authorized under this subdivision or the applicable law, including obtaining information, remedying violations, or conducting surveys, inspections, or investigations.

(b) Persons requested by the commissioner to give testimony or produce documents, apparatus, devices, equipment, or materials shall respond within the time and in the manner specified by the commissioner. If no time to respond is specified in the request, then a response shall be submitted within 30 days of the commissioner's service of the request.

(c) Upon the refusal or anticipated refusal of a property owner, lessee, property owner's representative, or lessee's representative to permit the commissioner's entry onto property as provided in paragraph (a), the commissioner may apply for an administrative inspection order in the Ramsey County District Court or, at the commissioner's discretion, in the district court in the county in which the property is located. The commissioner may anticipate that a property owner or lessee will refuse entry if the property owner, lessee, property owner's representative, or lessee's representative has refused to permit entry on a prior occasion or has informed the commissioner that entry will be refused. Upon showing of administrative probable cause by the commissioner, the district court shall issue an administrative inspection order that compels the property owner or lessee to permit the commissioner to enter the property for the purposes specified in paragraph (a).

(d) Upon the application of the commissioner, a district court shall treat the failure of any person to obey a subpoena lawfully issued by the commissioner under this subdivision as a contempt of court.

Subd. 3.Service.

Unless otherwise specified, service of a document on a person under this section or section 326B.083 may be by mail, by personal service, or in accordance with any consent to service filed with the commissioner. Service by mail shall be accomplished in the manner provided in Minnesota Rules, part 1400.5550, subpart 2. Personal service shall be accomplished in the manner provided in Minnesota Rules, part 1400.5550, subpart 3.

Subd. 4.Fax transmission.

When this section or section 326B.083 permits a request for reconsideration or request for hearing to be served by fax on the commissioner, the fax shall not exceed 15 pages in length. The request shall be considered timely served if the fax is received by the commissioner, at the fax number identified by the commissioner in the order or notice of violation, no later than 4:30 p.m. central time on the last day permitted for faxing the request. Where the quality or authenticity of the faxed request is at issue, the commissioner may require the original request to be filed. Where the commissioner has not identified quality or authenticity of the faxed request as an issue and the request has been faxed in accordance with this subdivision, the person faxing the request does not need to file the original request with the commissioner.

Subd. 5.Time computation.

In computing any period of time prescribed or allowed by this section, the day of the act, event, or default from which the designated period of time begins to run shall not be included. The last day of the period so computed shall be included, unless it is a Saturday, Sunday, or legal holiday, in which event the period runs until the next day which is not a Saturday, Sunday, or legal holiday.

Subd. 6.Notices of violation.

(a) The commissioner may issue a notice of violation to any person who the commissioner determines has committed a violation of the applicable law. The notice of violation must state a summary of the facts that constitute the violation and the applicable law violated. The notice of violation may require the person to correct the violation. If correction is required, the notice of violation must state the deadline by which the violation must be corrected.

(b) The commissioner shall issue the notice of violation by:

(1) serving the notice of violation on the property owner or on the person who committed the violation; or

(2) posting the notice of violation at the location where the violation occurred.

(c) If the person to whom the commissioner has issued the notice of violation believes the notice was issued in error, then the person may request reconsideration of the parts of the notice that the person believes are in error. The request for reconsideration must be in writing and must be served on, faxed, or e-mailed to the commissioner at the address, fax number, or e-mail address specified in the notice of violation by the tenth day after the commissioner issued the notice of violation. The date on which a request for reconsideration is served by mail shall be the postmark date on the envelope in which the request for reconsideration is mailed. If the person does not serve, fax, or e-mail a written request for reconsideration or if the person's written request for reconsideration is not served on or faxed to the commissioner by the tenth day after the commissioner issued the notice of violation, the notice of violation shall become a final order of the commissioner and will not be subject to review by any court or agency. The request for reconsideration must:

(1) specify which parts of the notice of violation the person believes are in error;

(2) explain why the person believes the parts are in error; and

(3) provide documentation to support the request for reconsideration.

The commissioner shall respond in writing to requests for reconsideration made under this paragraph within 15 days after receiving the request. A request for reconsideration does not stay a requirement to correct a violation as set forth in the notice of violation. After reviewing the request for reconsideration, the commissioner may affirm, modify, or rescind the notice of violation. The commissioner's response to a request for reconsideration is final and shall not be reviewed by any court or agency.

Subd. 7.Administrative orders; correction; assessment of monetary penalties.

(a) The commissioner may issue an administrative order to any person who the commissioner determines has committed a violation of the applicable law. The commissioner shall issue the administrative order by serving the administrative order on the person. The administrative order may require the person to correct the violation, may require the person to cease and desist from committing the violation, and may assess monetary penalties. The commissioner shall follow the procedures in section 326B.083 when issuing administrative orders. Except as provided in paragraph (b), the commissioner may issue to each person a monetary penalty of up to $10,000 for each violation of applicable law committed by the person. The commissioner may order that part or all of the monetary penalty will be forgiven if the person to whom the order is issued demonstrates to the commissioner by the 31st day after the order is issued that the person has corrected the violation or has developed a correction plan acceptable to the commissioner.

(b) The commissioner may issue an administrative order for failure to correct a violation by the deadline stated in a final administrative order issued under paragraph (a). Each day after the deadline during which the violation remains uncorrected is a separate violation for purposes of calculating the maximum monetary penalty amount.

(c) Upon the application of the commissioner, a district court shall find the failure of any person to correct a violation as required by a final administrative order issued by the commissioner under this subdivision as a contempt of court.

Subd. 8.Hearings related to administrative orders.

(a) Within 30 days after the commissioner issues an administrative order or within 20 days after the commissioner issues the notice under section 326B.083, subdivision 3, paragraph (b), clause (3), the person to whom the administrative order or notice is issued may request an expedited hearing to review the commissioner's order or notice. The request for hearing must be in writing and must be served on, faxed, or e-mailed to the commissioner at the address, fax number, or e-mail address specified in the order or notice. If the person does not request a hearing or if the person's written request for hearing is not served on, faxed, or e-mailed to the commissioner by the 30th day after the commissioner issues the administrative order or the 20th day after the commissioner issues the notice under section 326B.083, subdivision 3, paragraph (b), clause (3), the order will become a final order of the commissioner and will not be subject to review by any court or agency. The date on which a request for hearing is served by mail shall be the postmark date on the envelope in which the request for hearing is mailed. The hearing request must specifically state the reasons for seeking review of the order or notice. The person to whom the order or notice is issued and the commissioner are the parties to the expedited hearing. The commissioner must notify the person to whom the order or notice is issued of the time and place of the hearing at least 15 days before the hearing. The expedited hearing must be held within 45 days after a request for hearing has been received by the commissioner unless the parties agree to a later date.

(b) Parties may submit written arguments if permitted by the administrative law judge. All written arguments must be submitted within ten days following the completion of the hearing or the receipt of any late-filed exhibits that the parties and the administrative law judge have agreed should be received into the record, whichever is later. The hearing shall be conducted under Minnesota Rules, parts 1400.8510 to 1400.8612, as modified by this subdivision. The Office of Administrative Hearings may, in consultation with the agency, adopt rules specifically applicable to cases under this section.

(c) The administrative law judge shall issue a report making findings of fact, conclusions of law, and a recommended order to the commissioner within 30 days following the completion of the hearing, the receipt of late-filed exhibits, or the submission of written arguments, whichever is later.

(d) If the administrative law judge makes a finding that the hearing was requested solely for purposes of delay or that the hearing request was frivolous, the commissioner may add to the amount of the penalty the costs charged to the department by the Office of Administrative Hearings for the hearing.

(e) If a hearing has been held, the commissioner shall not issue a final order until at least five days after the date of the administrative law judge's report. Any person aggrieved by the administrative law judge's report may, within those five days, serve written comments to the commissioner on the report and the commissioner shall consider and enter the comments in the record. The commissioner's final order shall comply with sections 14.61, subdivision 2, and 14.62, subdivisions 1 and 2a, and may be appealed in the manner provided in sections 14.63 to 14.69.

Subd. 9.Injunctive relief.

In addition to any other remedy provided by law, the commissioner may bring an action for injunctive relief in the Ramsey County District Court or, at the commissioner's discretion, in the district court in the county in which the commissioner has determined a violation of the applicable law has occurred or is about to occur to enjoin the violation. A temporary restraining order and other injunctive relief shall be granted by the district court if the court determines that a person has engaged in or is about to engage in an act, conduct, or practice constituting a violation of the applicable law. The commissioner shall not be required to show irreparable harm.

Subd. 10.Stop orders.

(a) If the commissioner determines based on an inspection or investigation that a person has violated or is about to violate the applicable law, the commissioner may issue to the person a stop order requiring the person to cease and desist from committing the violation.

(b) If the commissioner determines that a condition exists on real property that violates the applicable law, the commissioner may issue a stop order to the owner or lessee of the real property to cease and desist from committing the violation and to correct the condition that is in violation.

(c) The commissioner shall issue the stop work order by:

(1) serving the order on the person who has committed or is about to commit the violation;

(2) posting the order at the location where the violation was committed or is about to be committed or at the location where the violating condition exists; or

(3) serving the order on any owner or lessee of the real property where the violating condition exists.

(d) A stop order shall:

(1) describe the act, conduct, or practice committed or about to be committed, or the condition, and include a reference to the applicable law that the act, conduct, practice, or condition violates or would violate; and

(2) provide notice that any person aggrieved by the stop order may request a hearing as provided in paragraph (e).

(e) Within 30 days after the commissioner issues a stop order, any person aggrieved by the order may request an expedited hearing to review the commissioner's action. The request for hearing must be made in writing and must be served on or faxed to the commissioner at the address or fax number specified in the order. If the person does not request a hearing or if the person's written request for hearing is not served on or faxed to the commissioner on or before the 30th day after the commissioner issued the stop order, the order will become a final order of the commissioner and will not be subject to review by any court or agency. The date on which a request for hearing is served by mail is the postmark date on the envelope in which the request for hearing is mailed. The hearing request must specifically state the reasons for seeking review of the order. The person who requested the hearing and the commissioner are the parties to the expedited hearing. The hearing shall be commenced within ten days after the commissioner receives the request for hearing. The hearing shall be conducted under Minnesota Rules, parts 1400.8510 to 1400.8612, as modified by this subdivision. The administrative law judge shall issue a report containing findings of fact, conclusions of law, and a recommended order within ten days after the completion of the hearing, the receipt of late-filed exhibits, or the submission of written arguments, whichever is later. Any party aggrieved by the administrative law judge's report shall have five days after the date of the administrative law judge's report to submit written exceptions and argument to the commissioner that the commissioner shall consider and enter in the record. Within 15 days after receiving the administrative law judge's report, the commissioner shall issue an order vacating, modifying, or making permanent the stop order. The commissioner and the person requesting the hearing may by agreement lengthen any time periods described in this paragraph. The Office of Administrative Hearings may, in consultation with the agency, adopt rules specifically applicable to cases under this subdivision.

(f) A stop order issued under this subdivision shall be in effect until it is modified or vacated by the commissioner or an appellate court. The administrative hearing provided by this subdivision and any appellate judicial review as provided in chapter 14 shall constitute the exclusive remedy for any person aggrieved by a stop order.

(g) Upon the application of the commissioner, a district court shall find the failure of any person to comply with a final stop order lawfully issued by the commissioner under this subdivision as a contempt of court.

Subd. 11.Licensing orders; grounds; reapplication.

(a) The commissioner may deny an application for a permit, license, registration, or certificate if the applicant does not meet or fails to maintain the minimum qualifications for holding the permit, license, registration, or certificate, or has any unresolved violations or unpaid fees or monetary penalties related to the activity for which the permit, license, registration, or certificate has been applied for or was issued.

(b) The commissioner may deny, suspend, limit, place conditions on, or revoke a person's permit, license, registration, or certificate, or censure the person holding or acting as qualifying person for the permit, license, registration, or certificate, if the commissioner finds that the person:

(1) committed one or more violations of the applicable law;

(2) submitted false or misleading information to the state in connection with activities for which the permit, license, registration, or certificate was issued, or in connection with the application for the permit, license, registration, or certificate;

(3) allowed the alteration or use of the person's own permit, license, registration, or certificate by another person;

(4) within the previous five years, was convicted of a crime in connection with activities for which the permit, license, registration, or certificate was issued;

(5) violated: (i) a final administrative order issued under subdivision 7, (ii) a final stop order issued under subdivision 10, (iii) injunctive relief issued under subdivision 9, or (iv) a consent order or final order of the commissioner;

(6) failed to cooperate with a commissioner's request to give testimony, to produce documents, things, apparatus, devices, equipment, or materials, or to access property under subdivision 2;

(7) retaliated in any manner against any employee or person who is questioned by, cooperates with, or provides information to the commissioner or an employee or agent authorized by the commissioner who seeks access to property or things under subdivision 2;

(8) engaged in any fraudulent, deceptive, or dishonest act or practice; or

(9) performed work in connection with the permit, license, registration, or certificate or conducted the person's affairs in a manner that demonstrates incompetence, untrustworthiness, or financial irresponsibility.

(c) If the commissioner revokes or denies a person's permit, license, registration, or certificate under paragraph (b), the person is prohibited from reapplying for the same type of permit, license, registration, or certificate for at least two years after the effective date of the revocation or denial. The commissioner may, as a condition of reapplication, require the person to obtain a bond or comply with additional reasonable conditions the commissioner considers necessary to protect the public.

(d) If a permit, license, registration, or certificate expires, or is surrendered, withdrawn, or terminated, or otherwise becomes ineffective, the commissioner may institute a proceeding under this subdivision within two years after the permit, license, registration, or certificate was last effective and enter a revocation or suspension order as of the last date on which the permit, license, registration, or certificate was in effect.

Subd. 12.Issuance of licensing orders; hearings related to licensing orders.

(a) If the commissioner determines that a permit, license, registration, or certificate should be conditioned, limited, suspended, revoked, or denied under subdivision 11, or that the permit holder, licensee, registrant, or certificate holder should be censured under subdivision 11, then the commissioner shall issue to the person an order denying, conditioning, limiting, suspending, or revoking the person's permit, license, registration, or certificate, or censuring the permit holder, licensee, registrant, or certificate holder.

(b) Any order issued under paragraph (a) may include an assessment of monetary penalties and may require the person to cease and desist from committing the violation or committing the act, conduct, or practice set out in subdivision 11, paragraph (b). The monetary penalty may be up to $10,000 for each violation or act, conduct, or practice committed by the person. The procedures in section 326B.083 must be followed when issuing orders under paragraph (a).

(c) The permit holder, licensee, registrant, certificate holder, or applicant to whom the commissioner issues an order under paragraph (a) shall have 30 days after issuance of the order to request a hearing. The request for hearing must be in writing and must be served on, faxed, or e-mailed to the commissioner at the address, fax number, or e-mail address specified in the order by the 30th day after issuance of the order. If the person does not request a hearing or if the person's written request for hearing is not served on, faxed, or e-mailed to the commissioner by the 30th day after issuance of the order, the order shall become a final order of the commissioner and will not be subject to review by any court or agency. The date on which a request for hearing is served by mail shall be the postmark date on the envelope in which the request for hearing is mailed. If the person submits to the commissioner a timely request for hearing, the order is stayed unless the commissioner summarily suspends the license, registration, certificate, or permit under subdivision 13, and a contested case hearing shall be held in accordance with chapter 14.

Subd. 13.Summary suspension.

In any case where the commissioner has issued an order to revoke, suspend, or deny a license, registration, certificate, or permit under subdivisions 11, paragraph (b), and 12, the commissioner may summarily suspend the person's permit, license, registration, or certificate before the order becomes final. The commissioner shall issue a summary suspension order when the safety of life or property is threatened or to prevent the commission of fraudulent, deceptive, untrustworthy, or dishonest acts against the public. The summary suspension shall not affect the deadline for submitting a request for hearing under subdivision 12. If the commissioner summarily suspends a person's permit, license, registration, or certificate, a timely request for hearing submitted under subdivision 12 shall also be considered a timely request for hearing on continuation of the summary suspension. If the commissioner summarily suspends a person's permit, license, registration, or certificate under this subdivision and the person submits a timely request for a hearing, then a hearing on continuation of the summary suspension must be held within ten days after the commissioner receives the request for hearing unless the parties agree to a later date.

Subd. 14.Plan for assessing penalties.

The commissioner may prepare a plan for assessing penalties in orders issued under subdivision 7 or 12. The commissioner shall provide a 30-day period for public comment on any such plan. Penalties assessed by the commissioner in accordance with the plan shall be presumed reasonable.

Subd. 15.Effect on other laws.

Nothing in this section shall be construed to limit the application of other state or federal laws, including specifically but not exclusively section 270C.72, that require suspension of, revocation of, denial of, or refusal to renew a permit, license, registration, or certificate issued by the commissioner.

Subd. 16.Misdemeanor penalties.

Except as otherwise provided by law, a person who violates an applicable law is guilty of a misdemeanor.

Subd. 17.Revocation and suspension of license.

If a person fails to pay a penalty owed under this section or section 326B.083, the commissioner may revoke, suspend, or deny any or all licenses, permits, certificates, and registrations issued by the department.

History:

2007 c 140 art 3 s 2; 2008 c 337 s 42-46; 2009 c 86 art 1 s 58; 2010 c 183 s 1; 2013 c 85 art 2 s 5; 2015 c 54 art 1 s 2; 1Sp2019 c 7 art 9 s 4-6

326B.083 AMOUNT OF PENALTY; CONTENTS OF ADMINISTRATIVE AND LICENSING ORDERS.

Subdivision 1.Amount of penalty; considerations.

In determining the amount of a penalty assessed under section 326B.082, subdivision 7 or 12, the commissioner shall consider the factors described in section 14.045, subdivision 3.

Subd. 2.Contents of administrative order and licensing order.

(a) An administrative order and a licensing order must include:

(1) a summary of the facts that constitute the violation or violations;

(2) a reference to the applicable law that has been violated; and

(3) a statement of the person's right to request a hearing.

(b) An administrative order may include a requirement that the violation be corrected. If the order includes a requirement that the violation be corrected, then the order must include, in addition to any statements required under paragraphs (a) and (c), the deadline by which the violation must be corrected.

(c) An administrative order or a licensing order may assess monetary penalties. If the order assesses monetary penalties, then the order must include, in addition to any statements required under paragraphs (a) and (b):

(1) a statement of the amount of the monetary penalty imposed;

(2) a statement that, when the order becomes final, the commissioner may file and enforce the unpaid portion of a penalty as a judgment in district court without further notice or additional proceedings; and

(3) if the order is an administrative order, a statement of the amount of the penalty, if any, that will be forgiven if the person who is subject to the order demonstrates to the commissioner by the 31st day after the order is served that the person has corrected the violation or has developed a correction plan acceptable to the commissioner.

Subd. 3.Penalty.

(a) If an administrative order includes a penalty assessment, then the penalty is due and payable on the date the administrative order becomes final unless some or all of the penalty is forgivable. If a licensing order includes a penalty assessment, then the penalty is due and payable on the date the licensing order becomes final.

(b) This paragraph applies if an administrative order includes a penalty assessment and all or a portion of the penalty is forgivable.

(1) If any portion of the penalty is not forgivable, that portion of the penalty is due and payable ten days after the date the administrative order becomes final.

(2) The commissioner shall forgive the forgivable portion of the penalty if the commissioner determines that the violation has been corrected within the time set by the order or the person to whom the order was issued has developed a correction plan acceptable to the commissioner within the time set by the order.

(3) If the commissioner determines that the person to whom the order was issued has failed to correct the violation within the time set by the order or has failed to develop a correction plan acceptable to the commissioner within the time set by the order, then the forgivable portion of the penalty is due and payable 20 days after the commissioner serves notice of the determination on the person or on the date the administrative order becomes final, whichever is later.

(c) This paragraph applies if an administrative order or a licensing order includes a penalty assessment and if the person subject to the order has requested a hearing. The administrative law judge may not recommend a change in the amount of the penalty if the penalty was assessed in accordance with a plan prepared under section 326B.082, subdivision 14. If the commissioner has not prepared a plan under section 326B.082, subdivision 14, then the administrative law judge may not recommend a change in the amount of the penalty unless the administrative law judge determines that, based on the factors in section 14.045, subdivision 3, the amount of the penalty is unreasonable.

(d) The assessment of a penalty does not preclude the use of other enforcement provisions, under which penalties are not assessed, in connection with the violation for which the penalty was assessed.

History:

2007 c 140 art 3 s 3; 2008 c 337 s 47

326B.084 FALSE INFORMATION; UNLICENSED ADVERTISING.

Subdivision 1.False information.

A person subject to any of the requirements in the applicable law may not make a false material statement, representation, or certification in; omit material information from; or alter, conceal, or fail to file or maintain a notice, application, record, report, plan, or other document required under the applicable law.

Subd. 2.Unlicensed advertising.

No person shall offer to perform services for which a license issued by the commissioner is required unless the person holds an active license to perform those services. Nothing in this subdivision prohibits an offer to sell, repair, or perform services provided those services are performed by a licensed person.

History:

2007 c 140 art 3 s 4; 2010 c 183 s 2

326B.085 RECOVERY OF LITIGATION COSTS AND EXPENSES.

In any action brought by the commissioner for enforcement of an order issued under section 326B.082 for injunctive relief, or to compel performance pursuant to the applicable law, if the state finally prevails, the state, in addition to other penalties provided by law, may be allowed an amount determined by the court to be the reasonable value of all or part of the litigation expenses incurred by the state. In determining the amount of the litigation expenses to be allowed, the court shall give consideration to the economic circumstances of the defendant.

History:

2007 c 140 art 3 s 5

LICENSES AND FEES

326B.091 DEFINITIONS.

Subdivision 1.Applicability.

For purposes of sections 326B.091 to 326B.099, the terms defined in this section have the meanings given them.

Subd. 2.Applicant.

"Applicant" means a person who has submitted to the department an application for an initial or renewal license.

Subd. 2a.Appropriate and related knowledge.

"Appropriate and related knowledge" means facts, information, or principles that are clearly relevant to the licensee's responsibilities under a license issued by the commissioner. These facts, information, or principles must convey substantive and procedural knowledge as it relates to postlicensing issues and must be relevant to the technical aspects of a regulated industry.

Subd. 2b.Classroom hour.

"Classroom hour" means 50 minutes of educational content.

Subd. 2c.Instructor.

"Instructor" means an individual lecturing in an approved educational offering.

Subd. 3.License.

"License" means any registration, certification, or other form of approval authorized by this chapter 326B and chapter 327B to be issued by the commissioner or department as a condition of doing business or conducting a trade, profession, or occupation in Minnesota. License includes specifically but not exclusively an authorization issued by the commissioner or department: to perform electrical work, plumbing or water conditioning work, high pressure piping work, or residential building work of a residential contractor, residential remodeler, or residential roofer; to install manufactured housing; to serve as a building official; or to operate a boiler or boat.

Subd. 4.Licensee.

"Licensee" means the person named on the license as the person authorized to do business or conduct the trade, profession, or occupation in Minnesota.

Subd. 4a.Medical hardship.

"Medical hardship" means a documented physical disability or medical condition.

Subd. 5.Notification date.

"Notification date" means the date of the written notification from the department to an applicant that the applicant is qualified to take the examination required for licensure.

Subd. 5a.Overpayment.

"Overpayment" means any payment of money in excess of a statutory fee.

Subd. 5b.Qualifying individual.

"Qualifying individual" means the individual responsible for obtaining continuing education on behalf of a residential building contractor, residential remodeler, or residential roofer licensed pursuant to sections 326B.801 to 326B.885.

Subd. 5c.Regulated industry.

"Regulated industry" means any business, trade, profession, or occupation that requires a license issued under this chapter or chapter 327B as a condition of doing business in Minnesota.

Subd. 6.

[Repealed, 2015 c 54 art 5 s 16]

Subd. 7.Sponsor.

"Sponsor" means any person or entity offering or providing approved continuing education.

History:

2007 c 140 art 8 s 27,30; art 13 s 4; 2010 c 347 art 3 s 3,76; 2010 c 385 s 6; 1Sp2011 c 4 art 3 s 4,27-30,58

326B.092 FEES.

Subdivision 1.Licenses requiring examination administered by commissioner.

(a) If the applicant for a license must pass an examination administered by the commissioner in order to obtain the license, then the application for the initial license must be accompanied by an application and examination fee of $50, which is separate from the license fee. The license fee is due after the applicant passes the examination and before the license is issued.

(b) If the applicant for a Minnesota license holds a license in another state and is seeking Minnesota licensure without examination based on reciprocity, then the application for the Minnesota license must be accompanied by the application and examination fee of $50, which is separate from the license fee. If the commissioner approves the application, then the license fee is due before the license is issued.

Subd. 2.Licenses not requiring examination administered by commissioner.

If the applicant for a license is not required to pass an examination in order to obtain the license, or is required to pass an examination that is not administered by the commissioner, then the license fee must accompany the application for the license. If the application is for a license issued under sections 326B.802 to 326B.885 and is not an application for license renewal, then the contractor recovery fund fee required under section 326B.89, subdivision 3, is due before the license is issued.

Subd. 3.Late fee.

The department must receive a complete application for license renewal prior to the license expiration date. If the department receives a renewal application after the expiration of the license, then the renewal application must be accompanied by a late fee equal to one-half of the license renewal fee; except that, for the purpose of calculating the late fee only, the license renewal fee shall not include any contractor recovery fund fee required by section 326B.89, subdivision 3.

Subd. 4.Lapsed licensed fee.

If the department receives a renewal application within two years after expiration of the license, the renewal application must be accompanied by all license renewal fees to cover the period that the license was expired, plus the late fee described in subdivision 3 and the license renewal fee for the current renewal period.

Subd. 5.Insufficient fees.

If the applicant does not include all required fees with the application, then the application will be incomplete and the department will notify the applicant of the amount of the deficiency.

Subd. 6.Fees nonrefundable.

Application and examination fees, license fees, license renewal fees, and late fees are nonrefundable except for:

(1) license renewal fees received more than two years after expiration of the license, as described in section 326B.094, subdivision 2;

(2) any overpayment of fees; and

(3) if the license is not renewed, the contractor recovery fund fee and any additional assessment paid under subdivision 7, paragraph (e).

Subd. 7.License fees and license renewal fees.

(a) The license fee for each license is the base license fee plus any applicable board fee, continuing education fee, and contractor recovery fund fee and additional assessment, as set forth in this subdivision.

(b) For purposes of this section, "license duration" means the number of years for which the license is issued except that if the initial license is not issued for a whole number of years, the license duration shall be rounded up to the next whole number.

(c) If there is a continuing education requirement for renewal of the license, then a continuing education fee must be included in the renewal license fee. The continuing education fee for all license classifications is $5.

(d) The base license fee shall depend on whether the license is classified as an entry level, master, journeyworker, or business license, and on the license duration. The base license fee shall be:

	License Classification	License Duration
		1 year	2 years
	Entry level	$10	$20
	Journeyworker	$20	$40
	Master	$40	$80
	Business		$180

(e) If the license is issued under sections 326B.31 to 326B.59 or 326B.90 to 326B.925, then a board fee must be included in the license fee and the renewal license fee. The board fee for all license classifications shall be: $4 if the license duration is one year; and $8 if the license duration is two years.

(f) If the application is for the renewal of a license issued under sections 326B.802 to 326B.885, then the contractor recovery fund fee required under section 326B.89, subdivision 3, and any additional assessment required under section 326B.89, subdivision 16, must be included in the license renewal fee.

(g) Notwithstanding the fee amounts described in paragraphs (d) to (f), for the period October 1, 2021, through September 30, 2023, the following fees apply:

	License Classification	License Duration
		1 year	2 years
	Entry level	$10	$20
	Journeyworker	$15	$30
	Master	$30	$60
	Business		$120

History:

2010 c 347 art 3 s 4,76; 2010 c 385 s 6; 2012 c 295 art 1 s 11,12; 2015 c 21 art 1 s 109; 2015 c 54 art 5 s 6,7; 1Sp2015 c 1 art 5 s 1; 2017 c 68 art 1 s 26; c 94 art 2 s 3; 1Sp2017 c 7 s 8; 1Sp2021 c 10 art 3 s 7

326B.0921 BOND REQUIREMENTS.

(a) All bonds that are required by this chapter must be in the form of a corporate surety bond conditioned upon the faithful and lawful performance of all work contracted for or performed in the state of Minnesota. The bond must be for the benefit of any person injured or suffering financial loss by reason of the licensee's failure to comply with the requirements of this chapter, the State Building Code, and all contracts entered into.

(b) The licensee must file the bond with the commissioner on the bond form provided by the commissioner. The bond must be in lieu of all other license bonds to any other political subdivision. The bond must be written by a corporate surety licensed to do business in the state of Minnesota.

(c) The penal sum of the bond is cumulative and must be aggregated every two years that the bond is in force. The aggregate liability shall be limited to the bond penalty shown on the bond form for each two-year period that the bond remains in effect for any losses that occur during each two-year period. The bond shall be effective continuously from the date of issue but may be canceled as to future liability by the surety upon 30 days' written notice mailed to the commissioner by certified mail. In the event the surety pays a claim that reduces the penal sum of the bond, the surety must notify the commissioner in writing of the payment of the claim and the reduced penal sum of the bond within 15 days of the payment of the claim.

(d) A licensee that is required to maintain a bond as a condition of licensure must ensure that it has a valid bond filed with the commissioner at all times that its license is active and that the required penal sum of the bond is maintained at all times.

History:

2015 c 54 art 1 s 3

326B.093 LICENSES REQUIRING EXAMINATION ADMINISTERED BY COMMISSIONER.

Subdivision 1.Qualifications for examination.

If the applicant for a license must pass an examination administered by the commissioner in order to obtain the license, then the applicant's complete application must demonstrate that the applicant is qualified to take the examination. The applicant is qualified to take the examination if the applicant meets all requirements for the license except for passing the examination.

Subd. 2.Not qualified for examination.

If the applicant is not qualified to take the examination, then the commissioner must deny the application. The applicant may subsequently submit another application, accompanied by the required fee.

Subd. 3.Taking the examination.

If the applicant is qualified to take the examination, then the department must notify the applicant, and the applicant may schedule a time to take the examination within one year after the notification date. If the applicant does not take the examination at the scheduled time, the applicant may, one time only, reschedule a time to take the examination on a date within one year after the notification date. If the applicant fails to take the examination within one year after the notification date, the commissioner must deny the application and the applicant forfeits the application/examination fee. The applicant may subsequently submit another application, accompanied by the required application/examination fee.

Subd. 4.Examination results.

If the applicant receives a passing score on the examination and meets all other requirements for licensure, the commissioner must approve the application and notify the applicant of the approval within 60 days of the date of the passing score. The applicant must, within 180 days after the notification of approval, pay the license fee. Upon receipt of the license fee, the commissioner must issue the license. If the applicant does not pay the license fee within 180 days after the notification of approval, the commissioner will rescind the approval and must deny the application. If the applicant does not receive a passing score on the examination, the commissioner must deny the application. If the application is denied because of the applicant's failure to receive a passing score on the examination, then the applicant cannot submit a new application for the license until at least 30 days after the notification of denial.

History:

2010 c 347 art 3 s 5,76; 2010 c 385 s 6; 2013 c 85 art 2 s 6

326B.094 RENEWAL OF LICENSES.

Subdivision 1.Expiration of licenses.

Unless and until the department or commissioner issues a renewal of a license, the license expires on the expiration date printed on the license. While the license is expired, the licensee cannot perform the activities authorized by the license.

Subd. 2.Availability of renewal.

A licensee may apply to renew a license no later than two years after the expiration of the license. If the department receives a complete renewal application no later than two years after the expiration of the license, then the department must approve or deny the renewal application within 60 days of receiving the complete renewal application. If the department receives a renewal application more than two years after the expiration of the license, the department must return the renewal license fee to the applicant without approving or denying the application. If the licensee wishes to obtain a valid license more than two years after expiration of the license, the licensee must apply for a new license. This section does not apply to a holder of a certificate of exemption issued under section 326B.805, subdivision 6, unlicensed individuals who register with the department under section 326B.33, subdivision 12, or 326B.47, or a mechanical contractor that files a bond with the department under section 326B.197.

Subd. 3.Deadline for avoiding license expiration.

The department must receive a complete application to renew a license no later than the license expiration date. If the department does not receive a complete application by the license expiration date, the license may expire before the department has either approved or denied the renewal application.

History:

2010 c 347 art 3 s 6,76; 2010 c 385 s 6; 2015 c 54 art 1 s 4; art 5 s 8

326B.095 INCOMPLETE LICENSE APPLICATIONS.

This section applies to both applications for initial licenses and license renewal applications. If the department determines that an application is incomplete, the department must notify the applicant of the deficiencies that must be corrected in order to complete the application. The department must receive the corrected application within 30 days after the date the department notified the applicant of the deficiencies that must be corrected. If the application is for license renewal and the department receives the corrected application after the license has expired, then the corrected application must be accompanied by the late fee.

History:

2010 c 347 art 3 s 7,76; 2010 c 385 s 6; 2017 c 68 art 1 s 4

326B.096 REINSTATEMENT OF LICENSES.

Subdivision 1.Reinstatement after revocation.

(a) If a license is revoked under this chapter and if an applicant for a license needs to pass an examination administered by the commissioner before becoming licensed, then, in order to have the license reinstated, the person who holds the revoked license must:

(1) retake the examination and achieve a passing score; and

(2) meet all other requirements for an initial license, including payment of the application and examination fee and the license fee. The person holding the revoked license is not eligible for Minnesota licensure without examination based on reciprocity.

(b) If a license is revoked under a chapter other than this chapter, then, in order to have the license reinstated, the person who holds the revoked license must:

(1) apply for reinstatement to the commissioner no later than two years after the effective date of the revocation;

(2) pay a $100 reinstatement application fee and any applicable renewal license fee; and

(3) meet all applicable requirements for licensure, except that, unless required by the order revoking the license, the applicant does not need to retake any examination and does not need to repay a license fee that was paid before the revocation.

Subd. 2.Reinstatement after suspension.

If a license is suspended, then, in order to have the license reinstated, the person who holds the suspended license must:

(1) apply for reinstatement to the commissioner no later than two years after the completion of the suspension period;

(2) pay a $100 reinstatement application fee and any applicable renewal license fee; and

(3) meet all applicable requirements for licensure, except that, unless required by the order suspending the license, the applicant does not need to retake any examination and does not need to repay a license fee that was paid before the suspension.

Subd. 3.Reinstatement after voluntary termination.

A licensee who is not an individual may voluntarily terminate a license issued to the person under this chapter. If a licensee has voluntarily terminated a license under this subdivision, then, in order to have the license reinstated, the person who holds the terminated license must:

(1) apply for reinstatement to the commissioner no later than the date that the license would have expired if it had not been terminated;

(2) pay a $100 reinstatement application fee and any applicable renewal license fee; and

(3) meet all applicable requirements for licensure, except that the applicant does not need to repay a license fee that was paid before the termination.

History:

2010 c 347 art 3 s 8,76; 2010 c 385 s 6; 1Sp2015 c 1 art 5 s 2

326B.097 PROHIBITION OF TRANSFER.

A licensee shall not transfer or sell any license.

History:

2010 c 347 art 3 s 9,76; 2010 c 385 s 6

326B.098 CONTINUING EDUCATION.

Subdivision 1.Department seminars.

This section applies to seminars offered by the department for the purpose of enabling licensees to meet continuing education requirements for license renewal.

Subd. 2.Rescheduling.

An individual who is registered with the department to attend a seminar may reschedule one time only, to attend the same seminar on a date within one year after the date of the seminar the individual was registered to attend.

Subd. 3.Fees nonrefundable.

All seminar fees paid to the department are nonrefundable except for any overpayment of fees or if the department cancels the seminar.

Subd. 4.Courses submitted by the state.

State agencies submitting courses for review that are intended for licensees regulated by the department are not required to pay the course approval fee. Courses must still be reviewed for appropriate credit in the designated license discipline. The department will act as sponsor for courses submitted by state agencies that are approved for continuing education.

History:

2010 c 347 art 3 s 10,76; 2010 c 385 s 6; 1Sp2011 c 4 art 3 s 5; 2015 c 54 art 1 s 5

326B.0981 CONTINUING EDUCATION; NONDEPARTMENT SEMINARS.

Subdivision 1.Nondepartment seminars.

This section applies to seminars that are offered by an entity other than the department for the purpose of enabling licensees to meet continuing education requirements for license renewal.

Subd. 2.Continuing education approval.

Continuing education courses must be approved in advance by the commissioner of labor and industry.

Subd. 3.Content.

(a) Continuing education consists of approved courses that impart appropriate and related knowledge in the regulated industries pursuant to this chapter and other applicable federal and state laws, rules, and regulations. Courses may include relevant materials that are included in licensing exams subject to the limitations imposed in subdivision 11. The burden of demonstrating that courses impart appropriate and related knowledge is upon the person seeking approval or credit.

(b) Except as required for Internet continuing education, course examinations will not be required for continuing education courses.

(c) If textbooks are not used as part of the course, the sponsor must provide students with a syllabus containing the course title; the times and dates of the course offering; the name, address, and telephone number of the course sponsor; the name and affiliation of the instructor; and a detailed outline of the subject materials to be covered. Any written or printed material given to students must be of readable quality and contain accurate and current information.

(d) Upon completion of an approved course, licensees shall earn one hour of continuing education credit for each classroom hour approved by the commissioner. Each continuing education course must be attended in its entirety in order to receive credit for the number of approved hours. Courses may be approved for full or partial credit, and for more than one regulated industry.

(e) Continuing education credit in an approved course shall be awarded to presenting instructors on the basis of one credit for each hour of the initial presentation. Continuing education credits for completion of an approved course may only be used once for renewal of a specific license.

(f) Courses will be approved using the following guidelines:

(1) course content must demonstrate significant intellectual or practical content and deal with matters directly related to the practice in the regulated industry, workforce safety, or the business of running a company in the regulated industry. Courses may also address the professional responsibility or ethical obligations of a licensee related to work in the regulated industry;

(2) the following courses may be approved if they are specifically designed for the regulated industry and are in compliance with paragraph (g):

(i) courses approved by the Minnesota Board of Continuing Legal Education; or

(ii) courses approved by the International Code Council, National Association of Home Building, or other nationally recognized professional organization of the regulated industry; and

(3) courses must be presented and attended in a suitable classroom or construction setting, except for Internet education courses which must meet the requirements of subdivision 5a. Courses presented via video recording, simultaneous broadcast, or teleconference may be approved provided the sponsor is available at all times during the presentation, except for Internet education courses which must meet the requirements of subdivision 5a.

(g) The following courses will not be approved for credit:

(1) courses designed solely to prepare students for a license examination;

(2) courses in mechanical office skills, including typing, speed reading, or other machines or equipment. Computer courses are allowed, if appropriate and related to the regulated industry;

(3) courses in sales promotion, including meetings held in conjunction with the general business of the licensee;

(4) courses in motivation, salesmanship, psychology, or personal time management;

(5) courses that are primarily intended to impart knowledge of specific products of specific companies, if the use of the product or products relates to the sales promotion or marketing of one or more of the products discussed; or

(6) courses where any of the educational content of the course is the State Building Code that include code provisions that have not been adopted into the State Building Code unless the course materials clarify that the code provisions have been officially adopted into a future version of the State Building Code and the effective date of enforcement.

(h) Nothing in this subdivision shall limit an authority expressly granted to the Board of Electricity, Board of High Pressure Piping Systems, or Plumbing Board.

Subd. 4.Internet continuing education.

(a) The design and delivery of an Internet continuing education course must be approved by the International Distance Education Certification Center (IDECC) or the International Association for Continuing Education and Training (IACET) before the course is submitted for the commissioner's approval. The approval must accompany the course submitted.

(b) Paragraphs (a) and (c) do not apply to approval of an Internet continuing education course for manufactured home installers. An Internet continuing education course for manufactured home installers must be approved by the United States Department of Housing and Urban Development or by the commissioner of labor and industry. The approval must accompany the course completion certificate issued to each student by the course sponsor.

(c) An Internet continuing education course must:

(1) specify the minimum computer system requirements;

(2) provide encryption that ensures that all personal information, including the student's name, address, and credit card number, cannot be read as it passes across the Internet;

(3) include technology to guarantee seat time;

(4) include a high level of interactivity;

(5) include graphics that reinforce the content;

(6) include the ability for the student to contact an instructor or course sponsor within a reasonable amount of time;

(7) include the ability for the student to get technical support within a reasonable amount of time;

(8) include a statement that the student's information will not be sold or distributed to any third party without prior written consent of the student. Taking the course does not constitute consent;

(9) be available 24 hours a day, seven days a week, excluding minimal downtime for updating and administration, except that this provision does not apply to live courses taught by an actual instructor and delivered over the Internet;

(10) provide viewing access to the online course at all times to the commissioner, excluding minimal downtime for updating and administration;

(11) include a process to authenticate the student's identity;

(12) inform the student and the commissioner how long after its purchase a course will be accessible;

(13) inform the student that license education credit will not be awarded for taking the course after it loses its status as an approved course;

(14) provide clear instructions on how to navigate through the course;

(15) provide automatic bookmarking at any point in the course;

(16) provide questions after each unit or chapter that must be answered before the student can proceed to the next unit or chapter;

(17) include a reinforcement response when a quiz question is answered correctly;

(18) include a response when a quiz question is answered incorrectly;

(19) include a final examination in which the student must correctly answer 70 percent of the questions;

(20) allow the student to go back and review any unit at any time, except during the final examination;

(21) provide a course evaluation at the end of the course. At a minimum, the evaluation must ask the student to report any difficulties caused by the online education delivery method;

(22) provide a completion certificate when the course and exam have been completed and the provider has verified the completion. Electronic certificates are sufficient and shall include the name of the provider, date and location of the course, educational program identification that was provided by the department, hours of instruction or continuing education hours, and licensee's or attendee's name and license, certification, or registration number or the last four digits of the licensee's or attendee's Social Security number; and

(23) allow the commissioner the ability to electronically review the class to determine if credit can be approved.

(d) The final examination must be either an encrypted online examination or a paper examination that is monitored by a proctor who certifies that the student took the examination.

Subd. 5.Course approval.

(a) Courses must be approved by the commissioner in advance and will be approved on the basis of the applicant's compliance with the provisions of this section relating to continuing education in the regulated industries. The commissioner shall make the final determination as to the approval and assignment of credit hours for courses. Courses must be at least one hour in length.

Licensees requesting credit for continuing education courses that have not been previously approved by the commissioner shall, on a form prescribed by the commissioner, submit an application for approval of continuing education credit accompanied by a nonrefundable fee of $20 for each course to be reviewed. To be approved, courses must be in compliance with the provisions of this section governing the types of courses that will and will not be approved.

Approval will not be granted for time spent on meals or other unrelated activities. Breaks may not be accumulated in order to dismiss the class early. Classes shall not be offered by a provider to any one student for longer than eight hours in one day, excluding meal breaks.

(b) Application for course approval must be submitted on a form approved by the commissioner at least 30 days before the course offering.

(c) Approval must be granted for a subsequent offering of identical continuing education courses without requiring a new application if a notice of the subsequent offering is filed with the commissioner at least 30 days in advance of the date the course is to be held. The commissioner shall deny future offerings of courses if they are found not to be in compliance with the laws relating to course approval.

Subd. 6.Courses open to all.

All course offerings must be open to any interested individuals. Access may be restricted by the sponsor based on class size only. Courses shall not be approved if attendance is restricted to any particular group of people, except for company-sponsored courses allowed by applicable law.

Subd. 7.Course tuition.

Tuition for an approved course of study and related materials must be clearly identified to students. In the event that a course is canceled for any reason, all tuition must be returned within 15 days from the date of cancellation. In the event that a course is postponed for any reason, students shall be given the choice of attending the course at a later date or having their tuition refunded in full within 15 days from the date of postponement. If a student is unable to attend a course or cancels the registration in a course, sponsor policies regarding refunds shall govern.

Subd. 8.Facilities.

Except for Internet education offered pursuant to subdivision 5a, each course of study must be conducted in a classroom or other facility that is adequate to comfortably accommodate the instructors and the number of students enrolled. The sponsor may limit the number of students enrolled in a course.

Subd. 9.Supplementary materials.

An adequate supply of supplementary materials to be used or distributed in connection with an approved course must be available at the time and place of the course offering in order to ensure that each student receives all of the necessary materials. Outlines and any other materials that are reproduced must be of readable quality.

Subd. 10.Advertising courses.

(a) Paragraphs (b) to (g) govern the advertising of continuing education courses.

(b) Advertising must be truthful and not deceptive or misleading. Courses may not be advertised as approved for continuing education credit unless approval has been granted in writing by the commissioner.

(c) Once a course is approved, all advertisement, pamphlet, circular, or other similar materials pertaining to an approved course circulated or distributed in this state, must prominently display the following statement:

"This course has been approved by the Minnesota Department of Labor and Industry for ....... (approved number of hours) hours for ....... (regulated industry) continuing education."

(d) Advertising of approved courses must be clearly distinguishable from the advertisement of other nonapproved courses and services.

(e) Continuing education courses may not be advertised before approval unless the course is described in any advertising as "approval pending." The sponsor must verbally notify students before commencement of the course if the course has been denied credit, has not been approved for credit, or has only been approved for partial credit by the commissioner.

(f) The number of hours for which a course has been approved must be prominently displayed on an advertisement for the course. If the course offering is longer than the number of hours of credit to be given, it must be clear that credit is not earned for the entire course.

(g) The course approval number must not be included in any advertisement.

Subd. 11.Notice to students.

At the beginning of each approved offering, the following notice must be handed out in printed form or must be read to students:

"This educational offering is recognized by the Minnesota Department of Labor and Industry as satisfying ....... (insert number of hours approved) hours of credit toward (insert regulated industry) continuing education requirements."

Subd. 12.Falsification of reports or certificates.

A licensee, its qualifying individual, or an applicant found to have falsified an education report or certificate to the commissioner shall be considered to have violated the laws relating to the regulated industry for which the person has a license and shall be subject to the enforcement provisions of section 326B.082.

The commissioner reserves the right to audit a licensee's continuing education records.

Subd. 13.Waivers and extensions.

Upon written proof demonstrating a medical hardship, the commissioner shall extend, for up to 90 days, the time period during which the continuing education must be successfully completed. Requests for extensions must be submitted to the commissioner in writing no later than 60 days before the education is due and must include an explanation with verification of the hardship, plus verification of enrollment at an approved course of study on or before the extension period expires.

Subd. 14.Reporting requirements.

Continuing education credits must be reported by the sponsor in a manner prescribed by the commissioner. Licensees are responsible for maintaining copies of course completion certificates.

Subd. 15.Continuing education fees.

The following fees shall be paid to the commissioner:

(1) initial course approval, $20 for each hour or fraction of one hour of continuing education course approval sought. Initial course approval expires on the last day of the 36th month after the course is approved;

(2) initial sponsor approval, $100. Initial sponsor approval expires on the last day of the 24th month after the sponsor is approved; and

(3) renewal of sponsor approval, $100. Renewal of sponsor approval expires on the last day of the 24th month after the sponsor is renewed.

Subd. 16.Refunds.

All fees paid to the commissioner under this section are nonrefundable, except that an overpayment of a fee shall be returned upon proper application.

Subd. 17.Renewal of approval.

The commissioner is authorized to establish a procedure for renewal of course approval.

History:

1991 c 306 s 11; 1992 c 522 s 23; 1992 c 595 s 25; 1992 c 597 s 17; 1993 c 245 s 18; 1996 c 439 art 4 s 2; 2007 c 140 art 8 s 12,30; art 13 s 4; 2008 c 322 s 6; 2008 c 337 s 38; 2009 c 78 art 5 s 21; 2010 c 260 s 1;1Sp2011 c 4 art 3 s 6,31-35,40-47,58; 2012 c 295 art 1 s 13; 2021 c 11 s 1

326B.099 CONTINUING EDUCATION; COURSES.

Subdivision 1.Course sponsor.

(a) Each course of study shall have at least one sponsor, approved by the commissioner, who is responsible for supervising the program and ensuring compliance with all relevant law. Sponsors may engage an additional approved sponsor in order to assist the sponsor or to act as a substitute for the sponsor.

(b) Sponsors must submit an application and sworn statement stating they agree to abide by the requirements of this section and any other applicable statute or rule pertaining to continuing education in the regulated industry.

(c) A sponsor may also be an instructor.

(d) Failure to comply with paragraph (b) may result in loss of sponsor approval for up to two years in accordance with section 326B.082.

Subd. 2.Responsibilities.

A sponsor is responsible for:

(1) ensuring compliance with all laws and rules relating to continuing educational offerings governed by the commissioner;

(2) ensuring that students are provided with current and accurate information relating to the laws and rules governing the regulated industry;

(3) supervising and evaluating courses and instructors. Supervision includes ensuring that all areas of the curriculum are addressed without redundancy and that continuity is present throughout the entire course;

(4) ensuring that instructors are qualified to teach the course offering;

(5) furnishing the commissioner, upon request, with copies of course evaluations. Evaluations must be completed by students at the time the course is offered;

(6) furnishing the commissioner, upon request, with copies of the qualifications of instructors;

(7) investigating complaints related to course offerings or instructors. A copy of the written complaint must be sent to the commissioner within ten days of receipt of the complaint and a copy of the complaint resolution must be sent not more than ten days after resolution is reached;

(8) maintaining accurate records relating to course offerings, instructors, tests taken by students if required, and student attendance for a period of three years from the date on which the course was completed. These records must be made available to the commissioner upon request. In the event the sponsor ceases operations before termination of the sponsor application, the sponsor must provide to the commissioner digital copies of all course and attendance records of courses held for the previous three years;

(9) attending workshops or instructional programs as reasonably required by the commissioner;

(10) providing course completion certificates within ten days of, but not before, completion of the entire course. A sponsor may require payment of the course tuition as a condition of receiving the course completion certificate. Course completion certificates must be completed in their entirety and shall contain the following:

(i) the statement: "If you have any comments about this course offering, please mail them to the Minnesota Department of Labor and Industry.";

(ii) the current address of the department, name of the provider, date and location of the course, educational program identification provided by the department, and hours of instruction or continuing education hours; and

(iii) the licensee's or attendee's name and license, certificate, or registration number or the last four digits of the licensee's or attendee's Social Security number; and

(11) notifying the commissioner in writing within ten days of any change in the information in an application for approval on file with the commissioner.

Subd. 3.Instructors.

(a) Each continuing education course shall have an instructor who is qualified by education, training, or experience to ensure competent instruction. Failure to have only qualified instructors teach at an approved course offering will result in loss of course approval. Sponsors are responsible to ensure that an instructor is qualified to teach the course offering.

(b) Qualified continuing education instructors must have one of the following qualifications:

(1) four years' practical experience in the subject area being taught;

(2) a college or graduate degree in the subject area being taught;

(3) direct experience in the development of laws, rules, or regulations related to the regulated industry; or

(4) demonstrated expertise in the subject area being taught. Instructors providing instruction related to electricity, plumbing, or high pressure piping systems must comply with all applicable continuing education rules adopted by the Board of Electricity, the Plumbing Board, or the Board of High Pressure Piping Systems.

(c) Qualified continuing education instructors are responsible for:

(1) compliance with all laws and rules relating to continuing education;

(2) providing students with current and accurate information;

(3) maintaining an atmosphere conducive to learning in the classroom;

(4) verifying attendance of students, and certifying course completion;

(5) providing assistance to students and responding to questions relating to course materials; and

(6) attending the workshops or instructional programs that are required by the commissioner.

Subd. 4.Prohibited practices for sponsors and instructors.

(a) In connection with an approved continuing education course, sponsors and instructors shall not:

(1) recommend, promote, or disparage the specific services, products, processes, procedures, or practices of a particular person in the regulated industry;

(2) encourage or recruit students to engage the services of, or become associated with, a particular business;

(3) use materials for the sole purpose of promoting a particular business;

(4) require students to participate in other programs or services offered by an instructor or sponsor;

(5) attempt, either directly or indirectly, to discover questions or answers on an examination for a license;

(6) disseminate to any other person specific questions, problems, or information known or believed to be included in licensing examinations;

(7) misrepresent any information submitted to the commissioner;

(8) fail to reasonably cover, or ensure coverage of, all points, issues, and concepts contained in the course outline approved by the commissioner during the approved instruction; or

(9) issue inaccurate course completion certificates.

(b) Sponsors shall notify the commissioner within ten days of a felony or gross misdemeanor conviction or of disciplinary action taken against an occupational or professional license held by the sponsor or an instructor teaching an approved course. The conviction or disciplinary action shall be grounds for the commissioner to withdraw the approval of the sponsor and to disallow the use of the sponsor or instructor.

Subd. 5.Audits.

The commissioner reserves the right to audit subject offerings with or without notice to the sponsor.

History:

1991 c 306 s 11; 1992 c 522 s 23; 1992 c 595 s 25; 1992 c 597 s 17; 1993 c 245 s 18; 1996 c 439 art 4 s 2; 2007 c 140 art 8 s 12,30; art 13 s 4; 2008 c 322 s 6; 2008 c 337 s 38; 2009 c 78 art 5 s 21; 2010 c 260 s 1;1Sp2011 c 4 art 3 s 36-39,58

STATE BUILDING CODE

326B.101 POLICY AND PURPOSE.

The State Building Code governs the construction, reconstruction, alteration, repair, and use of buildings and other structures to which the code is applicable. The commissioner shall administer and amend a state code of building construction which will provide basic and uniform performance standards, establish reasonable safeguards for health, safety, welfare, comfort, and security of the residents of this state and provide for the use of modern methods, devices, materials, and techniques which will in part tend to lower construction costs. The construction of buildings should be permitted at the least possible cost consistent with recognized standards of health and safety.

History:

1984 c 544 s 64; 1995 c 254 art 2 s 1; 2007 c 140 art 4 s 61; art 13 s 4; 2013 c 85 art 2 s 7

326B.103 DEFINITIONS.

Subdivision 1.Scope.

For the purposes of sections 326B.101 to 326B.194, the terms defined in this section have the meanings given them.

Subd. 2.Administrative authority.

"Administrative authority" means a municipality's governing body or their assigned administrative authority.

Subd. 3.Agricultural building.

"Agricultural building" means a structure that is:

(1) on agricultural land as determined by the governing assessor for the municipality or county under section 273.13, subdivision 23;

(2) designed, constructed, and used to house farm implements, livestock, or agricultural products under section 273.13, subdivision 23; and

(3) used by the owner, lessee, and sublessee of the building and members of their immediate families, their employees, and persons engaged in the pickup or delivery of agricultural products.

Subd. 4.City.

"City" means a home rule charter or statutory city.

Subd. 5.Code.

"Code" means the State Building Code adopted by the commissioner of labor and industry in consultation with each industry board and the Construction Codes Advisory Council in accordance with sections 326B.101 to 326B.194.

Subd. 6.Designate.

"Designate" means the formal designation by a municipality's administrative authority of a certified building official accepting responsibility for code administration.

Subd. 7.Equivalent protection.

"Equivalent protection" means a measure other than a code requirement that provides essentially the same protection that would be provided by a code requirement.

Subd. 8.Historic building.

"Historic building" means a state-owned building that is on the National Register of Historic Places.

Subd. 9.Municipality.

"Municipality" means a city, county, or town, the University of Minnesota, or the state for public buildings and state licensed facilities.

Subd. 10. Person with a disability.

"Person with a disability" or "persons with disabilities" includes people who have a vision disability, a hearing disability, a disability of coordination, a disability of aging, or any other disability that significantly reduces mobility, flexibility, coordination, or perceptiveness.

Subd. 11.Public building.

"Public building" means a building and its grounds the cost of which is paid for by the state or a state agency regardless of its cost, and a building project for a school district or charter school the cost of which is $100,000 or more.

Subd. 12.Remodeling.

"Remodeling" means deliberate reconstruction of an existing public building in whole or in part in order to bring it into conformity with present uses of the structure and to which other rules on the upgrading of health and safety provisions are applicable.

Subd. 13.State licensed facility.

"State licensed facility" means a building and its grounds that are licensed by the state as a hospital, nursing home, supervised living facility, free-standing outpatient surgical center, correctional facility, boarding care home, or residential hospice.

History:

1984 c 544 s 65; 1Sp1985 c 14 art 4 s 3; 1987 c 387 s 1,2; 1989 c 329 art 5 s 1; 1990 c 458 s 1; 1990 c 572 s 10,11; 1994 c 634 art 2 s 1,2; 1995 c 254 art 2 s 2,3; 1Sp2001 c 10 art 2 s 26-28; 2005 c 56 s 1; 2007 c 140 art 4 s 2-5,61; art 13 s 4; 2012 c 295 art 1 s 14; 2013 c 85 art 2 s 8; 1Sp2019 c 7 art 9 s 7

326B.106 GENERAL POWERS OF COMMISSIONER OF LABOR AND INDUSTRY.

Subdivision 1.Adoption of code.

(a) Subject to paragraphs (c) and (d) and sections 326B.101 to 326B.194, the commissioner shall by rule and in consultation with the Construction Codes Advisory Council establish a code of standards for the construction, reconstruction, alteration, and repair of buildings, governing matters of structural materials, design and construction, fire protection, health, sanitation, and safety, including design and construction standards regarding heat loss control, illumination, and climate control. The code must also include duties and responsibilities for code administration, including procedures for administrative action, penalties, and suspension and revocation of certification. The code must conform insofar as practicable to model building codes generally accepted and in use throughout the United States, including a code for building conservation. In the preparation of the code, consideration must be given to the existing statewide specialty codes presently in use in the state. Model codes with necessary modifications and statewide specialty codes may be adopted by reference. The code must be based on the application of scientific principles, approved tests, and professional judgment. To the extent possible, the code must be adopted in terms of desired results instead of the means of achieving those results, avoiding wherever possible the incorporation of specifications of particular methods or materials. To that end the code must encourage the use of new methods and new materials. Except as otherwise provided in sections 326B.101 to 326B.194, the commissioner shall administer and enforce the provisions of those sections.

(b) The commissioner shall develop rules addressing the plan review fee assessed to similar buildings without significant modifications including provisions for use of building systems as specified in the industrial/modular program specified in section 326B.194. Additional plan review fees associated with similar plans must be based on costs commensurate with the direct and indirect costs of the service.

(c) Beginning with the 2018 edition of the model building codes and every six years thereafter, the commissioner shall review the new model building codes and adopt the model codes as amended for use in Minnesota, within two years of the published edition date. The commissioner may adopt amendments to the building codes prior to the adoption of the new building codes to advance construction methods, technology, or materials, or, where necessary to protect the health, safety, and welfare of the public, or to improve the efficiency or the use of a building.

(d) Notwithstanding paragraph (c), the commissioner shall act on each new model residential energy code and the new model commercial energy code in accordance with federal law for which the United States Department of Energy has issued an affirmative determination in compliance with United States Code, title 42, section 6833. The commissioner may adopt amendments prior to adoption of the new energy codes, as amended for use in Minnesota, to advance construction methods, technology, or materials, or, where necessary to protect the health, safety, and welfare of the public, or to improve the efficiency or use of a building.

Subd. 2.

[Renumbered 326B.107, subdivision 1]

Subd. 2a.

[Renumbered 326B.107, subd 2]

Subd. 2b.

[Renumbered 326B.107, subd 3]

Subd. 2c.

[Renumbered 326B.107, subd 4]

Subd. 2d.

[Renumbered 326B.107, subd 5]

Subd. 2e.

[Renumbered 326B.107, subd 6]

Subd. 2f.Natural disasters.

The commissioner may direct the state building official to assist a community that has been affected by a natural disaster with building evaluation and other activities related to building codes.

Subd. 2g.Elevators.

The commissioner shall administer and enforce the provisions of the code relating to elevators statewide, except as provided for under section 326B.184, subdivision 4.

Subd. 3.Enforcement by certain bodies.

Under the direction and supervision of the commissioner, the provisions of the code relating to electrical installations, plumbing, boilers, high pressure steam piping and appurtenances, and ammonia refrigeration piping shall be enforced by the Department of Labor and Industry. Fees for inspections conducted by the commissioner shall be paid in accordance with the rules of the department. Under direction of the commissioner of public safety, the state fire marshal shall enforce the State Fire Code as provided in chapter 299F. The commissioner shall adopt amendments to the mechanical code portion of the State Building Code to implement standards for process piping.

Subd. 4.Special requirements.

(a) Space for commuter vans. The code must require that any parking ramp or other parking facility constructed in accordance with the code include an appropriate number of spaces suitable for the parking of motor vehicles having a capacity of seven to 16 persons and which are principally used to provide prearranged commuter transportation of employees to or from their place of employment or to or from a transit stop authorized by a local transit authority.

(b) Smoke detection devices. The code must require that all dwellings, lodging houses, apartment houses, and hotels as defined in section 299F.362 comply with the provisions of section 299F.362.

(c) Doors in nursing homes and hospitals. The State Building Code may not require that each door entering a sleeping or patient's room from a corridor in a nursing home or hospital with an approved complete standard automatic fire extinguishing system be constructed or maintained as self-closing or automatically closing.

(d) Child care facilities in churches; ground level exit. A licensed day care center serving fewer than 30 preschool age persons and which is located in a belowground space in a church building is exempt from the State Building Code requirement for a ground level exit when the center has more than two stairways to the ground level and its exit.

(e) Family and group family day care. Until the legislature enacts legislation specifying appropriate standards, the definition of dwellings constructed in accordance with the International Residential Code as adopted as part of the State Building Code applies to family and group family day care homes licensed by the Department of Human Services under Minnesota Rules, chapter 9502.

(f) Enclosed stairways. No provision of the code or any appendix chapter of the code may require stairways of existing multiple dwelling buildings of two stories or less to be enclosed.

(g) Double cylinder dead bolt locks. No provision of the code or appendix chapter of the code may prohibit double cylinder dead bolt locks in existing single-family homes, townhouses, and first floor duplexes used exclusively as a residential dwelling. Any recommendation or promotion of double cylinder dead bolt locks must include a warning about their potential fire danger and procedures to minimize the danger.

(h) Relocated residential buildings. A residential building relocated within or into a political subdivision of the state need not comply with the State Energy Code or section 326B.439 provided that, where available, an energy audit is conducted on the relocated building.

(i) Automatic garage door opening systems. The code must require all residential buildings as defined in section 325F.82 to comply with the provisions of sections 325F.82 and 325F.83.

(j) Exterior wood decks, patios, and balconies. The code must permit the decking surface and upper portions of exterior wood decks, patios, and balconies to be constructed of (1) heartwood from species of wood having natural resistance to decay or termites, including redwood and cedars, (2) grades of lumber which contain sapwood from species of wood having natural resistance to decay or termites, including redwood and cedars, or (3) treated wood. The species and grades of wood products used to construct the decking surface and upper portions of exterior decks, patios, and balconies must be made available to the building official on request before final construction approval.

(k) Bioprocess piping and equipment. No permit fee for bioprocess piping may be imposed by municipalities under the State Building Code, except as required under section 326B.92 subdivision 1. Permits for bioprocess piping shall be according to section 326B.92 administered by the Department of Labor and Industry. All data regarding the material production processes, including the bioprocess system's structural design and layout, are nonpublic data as provided by section 13.7911.

(l) Use of ungraded lumber. The code must allow the use of ungraded lumber in geographic areas of the state where the code did not generally apply as of April 1, 2008, to the same extent that ungraded lumber could be used in that area before April 1, 2008.

(m) Window cleaning safety. The code must require the installation of dedicated anchorages for the purpose of suspended window cleaning on (1) new buildings four stories or greater; and (2) buildings four stories or greater, only on those areas undergoing reconstruction, alteration, or repair that includes the exposure of primary structural components of the roof.

The commissioner may waive all or a portion of the requirements of this paragraph related to reconstruction, alteration, or repair, if the installation of dedicated anchorages would not result in significant safety improvements due to limits on the size of the project, or other factors as determined by the commissioner.

Subd. 5.Recycling space.

The code must require suitable space for the separation, collection, and temporary storage of recyclable materials within or adjacent to new or significantly remodeled structures that contain 1,000 square feet or more. Residential structures with fewer than four dwelling units are exempt from this subdivision.

Subd. 6.Radon code.

The commissioner of labor and industry shall adopt rules for radon control as part of the State Building Code for all new residential buildings. These rules shall incorporate the radon control methods found in the International Residential Code appendix as the model language, with necessary amendments to coordinate with the other adopted construction codes in Minnesota.

Subd. 7.Window fall prevention device code.

(a) The commissioner of labor and industry shall adopt rules for window fall prevention devices as part of the State Building Code. Window fall prevention devices include, but are not limited to, safety screens, hardware, guards, and other devices that comply with the standards established by the commissioner of labor and industry. The rules shall require compliance with standards for window fall prevention devices developed by ASTM International, contained in the International Building Code as the model language with amendments deemed necessary to coordinate with the other adopted building codes in Minnesota. The rules shall establish a scope that includes the applicable building occupancies, and the types, locations, and sizes of windows that will require the installation of fall devices.

(b) In one- and two-family dwellings and townhouses, as defined in Minnesota Rules, part 1309.0202, subpart 1, window fall prevention devices are not required when: (1) the lowest part of the window opening of an operable window is a minimum of 24 inches above the finished floor of the room in which the window is located; or (2) the lowest part of the opening of an operable window is located 72 inches or less above the exterior grade below.

Subd. 8.

[Renumbered 326B.107, subd 7]

Subd. 9.Accessibility.

(a) Public buildings. The code must require new public buildings and remodeled portions of existing public buildings to be accessible to and usable by persons with disabilities.

(b) Leased space. No agency of the state may lease space for agency operations in a non-state-owned building unless the building satisfies the requirements of the State Building Code for accessibility by persons with disabilities, or is eligible to display the state symbol of accessibility. This limitation applies to leases of 30 days or more for space of at least 1,000 square feet.

(c) Meetings or conferences. Meetings or conferences for the public or for state employees which are sponsored in whole or in part by a state agency must be held in buildings that meet the State Building Code requirements relating to accessibility for persons with disabilities. This subdivision does not apply to any classes, seminars, or training programs offered by the Minnesota State Colleges and Universities or the University of Minnesota. Meetings or conferences intended for specific individuals none of whom need the accessibility features for persons with disabilities specified in the State Building Code need not comply with this subdivision unless a person with a disability gives reasonable advance notice of an intent to attend the meeting or conference. When sign language interpreters will be provided, meetings or conference sites must be chosen which allow participants who are deaf or hard-of-hearing to see the sign language interpreters clearly.

(d) Exemptions. The commissioner may grant an exemption from the requirements of paragraphs (b) and (c) in advance if an agency has demonstrated that reasonable efforts were made to secure facilities which complied with those requirements and if the selected facilities are the best available for access for persons with disabilities. Exemptions shall be granted using criteria developed by the commissioner in consultation with the Council on Disability.

(e) Symbol indicating access. The wheelchair symbol adopted by Rehabilitation International's Eleventh World Congress is the state symbol indicating buildings, facilities, and grounds which are accessible to and usable by persons with disabilities. In the interests of uniformity, this symbol is the sole symbol for display in or on all public or private buildings, facilities, and grounds which qualify for its use. The secretary of state shall obtain the symbol and keep it on file. No building, facility, or grounds may display the symbol unless it is in compliance with the rules adopted by the commissioner under subdivision 1. Before any rules are proposed for adoption under this paragraph, the commissioner shall consult with the Council on Disability. Rules adopted under this paragraph must be enforced in the same way as other accessibility rules of the State Building Code.

Subd. 10.

[Repealed, 2015 c 54 art 5 s 16]

Subd. 11.Access for people with a hearing loss.

All rooms in the State Office Building and in the Capitol that are used by the house of representatives or the senate for legislative hearings, and the public galleries overlooking the house of representatives and senate chambers, must be fitted with assistive listening devices for people with hearing loss. Each hearing room and the public galleries must have a sufficient number of receivers available so that members of the public who have hearing loss may participate in the committee hearings and public sessions of the house of representatives and senate.

Subd. 12.Separate metering for electric service.

The standards concerning heat loss, illumination, and climate control adopted pursuant to subdivision 1, shall require that electrical service to individual dwelling units in buildings containing two or more units be separately metered, with individual metering readily accessible to the individual occupants. The standards authorized by this subdivision shall only apply to buildings constructed after the effective date of the amended standards. Buildings intended for occupancy primarily by persons who are 62 years of age or older or disabled, supportive housing, or buildings that contain a majority of units not equipped with complete kitchen facilities, shall be exempt from the provisions of this subdivision. For purposes of this section, "supportive housing" means housing made available to individuals and families with multiple barriers to obtaining and maintaining housing, including those who are formerly homeless or at risk of homelessness and those who have a mental illness, substance abuse disorder, debilitating disease, or a combination of these conditions.

Subd. 13.Lead certification.

When issuing permits in compliance with the State Building Code to a residential building contractor, residential remodeler, manufactured home installer, or residential roofer licensed under section 326B.805, municipalities must verify lead certification qualifications of the licensee required under subdivision 14 for renovations performed on residential property constructed prior to 1978. Municipalities may charge a surcharge for verification of this certification under section 326B.815, subdivision 2. The state or any political subdivision must not impose a fee for the same or similar certification as required under Code of Federal Regulations, title 40, section 745.89.

Subd. 14.Pre-1978 structures.

A residential building contractor, residential remodeler, manufactured home installer, or residential roofer licensed under section 326B.805 performing renovation as defined by Code of Federal Regulations, title 40, section 745.83, on a residential structure constructed prior to 1978 must be certified in accordance with Code of Federal Regulations, title 40, section 745.89, unless the property has been determined to meet an exemption under Code of Federal Regulations, title 40, section 745.82. Before performing the renovations as defined by Code of Federal Regulations, title 40, section 745.83, on a residential structure constructed prior to 1978, a licensee working on the structure must be able to provide to the commissioner information so that proof of certification can be obtained as required in this subdivision. The department shall provide on its website a link to the United States Environmental Protection Agency website for verification of certification of a licensee.

Subd. 15.Translucent panels; skylights.

Notwithstanding any other law to the contrary, the code must require that translucent panels or other skylights without raised curbs shall be supported to have equivalent load-bearing capacity as the surrounding roof.

History:

1977 c 381 s 18; 1978 c 786 s 2,3; Ex1979 c 2 s 29-31; 1980 c 579 s 9; 1981 c 85 s 5; 1981 c 255 s 2,5; 1981 c 356 s 154-158,248; 1981 c 365 s 9; 1982 c 424 s 23-25,130; 1983 c 301 s 125,126; 1984 c 544 s 66; 1984 c 595 s 1-5; 1984 c 640 s 32; 1984 c 655 art 2 s 13 subd 1; 1984 c 658 s 1; 1985 c 194 s 30; 1985 c 248 s 70; 1986 c 444; 1Sp1986 c 3 art 4 s 2; 1987 c 258 s 12; 1987 c 291 s 192,196; 1987 c 312 art 1 s 10 subd 1; 1987 c 354 s 8; 1987 c 387 s 3; 1988 c 608 s 1; 1988 c 685 s 2; 1989 c 82 s 1; 1989 c 209 art 2 s 1; 1989 c 246 s 2; 1989 c 335 art 1 s 65; 1990 c 414 s 1; 1991 c 104 s 1; 1991 c 134 s 1; 1991 c 149 s 2; 1991 c 235 art 3 s 1; 1991 c 240 s 1; 1991 c 337 s 4; 1992 c 597 s 1; 1993 c 327 s 1; 1994 c 480 s 6; 1994 c 567 s 1; 1994 c 634 art 2 s 3,4; 1995 c 100 s 1; 1995 c 166 s 1,2,17; 1995 c 213 art 1 s 1; 1995 c 233 art 2 s 56; 1995 c 254 art 2 s 4-6; 1Sp1995 c 3 art 16 s 13; 1996 c 395 s 18; 1997 c 183 art 3 s 27; 1999 c 135 s 1,2; 1999 c 185 s 1; 2000 c 297 s 1,3; 2001 c 7 s 10; 2001 c 207 s 1,2; 1Sp2001 c 10 art 2 s 29; 1Sp2003 c 8 art 1 s 5; 2005 c 56 s 1; 2005 c 97 art 4 s 6; 2005 c 136 art 9 s 14; 2006 c 241 s 2,3; 2007 c 40 s 1; 2007 c 135 art 2 s 2; 2007 c 140 art 4 s 6, 61; art 10 s 11; art 13 s 4; 2007 c 147 art 16 s 1; 2008 c 322 s 1; 2008 c 337 s 64; 2010 c 321 s 1,2; 2010 c 347 art 3 s 11; 2010 c 361 art 5 s 10; 2011 c 2 s 1,2,4; 2011 c 20 s 1; 2012 c 182 s 1; 2013 c 62 s 23,24; 2014 c 305 s 18-25; 2015 c 54 art 1 s 6; art 5 s 9,10; 1Sp2019 c 7 art 9 s 8; 1Sp2021 c 8 art 2 s 4

326B.107 PUBLIC BUILDINGS AND STATE-LICENSED FACILITIES.

Subdivision 1.Administration by commissioner.

Unless the commissioner has entered into an agreement under subdivision 2 or 3, the commissioner shall administer and enforce the State Building Code as a municipality with respect to public buildings and state-licensed facilities in the state. The commissioner shall establish appropriate permit, plan review, inspection fees, and surcharges for public buildings and state-licensed facilities.

Subd. 2.Municipal agreement for all building projects.

(a) The commissioner shall enter into an agreement with a municipality other than the state for plan review, inspection, code administration, and code enforcement on public buildings and state-licensed facilities in the jurisdiction if the municipality requests to provide those services and the commissioner determines that the municipality has enough adequately trained and qualified inspectors to provide those services. In determining whether a municipality has enough adequately trained and qualified inspectors to provide the service, the commissioner must consider all inspectors who are employed by the municipality, are under contract with the municipality to provide inspection services, or are obligated to provide inspection services to the municipality under any other lawful agreement.

(b) The criteria used to make this determination shall be provided in writing to the municipality requesting an agreement.

(c) If the commissioner determines that the municipality lacks enough adequately trained and qualified inspectors to provide the required services, a written explanation of the deficiencies shall be provided to the municipality.

(d) The municipality shall be given an opportunity to remedy any deficiencies and request reconsideration of the commissioner's determination. A request for reconsideration must be in writing and accompanied by substantiating documentation. A request for reconsideration must be received by the commissioner within 90 days of the determination explanation. The commissioner shall review the information and issue a final determination to the municipality within 30 days of the request.

(e) A municipality aggrieved by a final decision of the commissioner to not enter into an agreement may appeal to be heard as a contested case in accordance with chapter 14.

Subd. 3.Municipal agreement for certain building projects.

The commissioner shall enter into an agreement with a municipality other than the state for inspection, code administration, and code enforcement of reserved projects occurring on public buildings and state-licensed facilities in its jurisdiction if the municipality has a designated building official as required by section 326B.133 and requests to provide those services.

For purposes of this subdivision, "reserved projects" includes the following:

(1) roof covering replacement that does not add roof load;

(2) towers requiring special inspection;

(3) single-level storage buildings not exceeding 5,000 square feet;

(4) exterior maintenance work, including replacement of siding, windows, and doors;

(5) HVAC unit replacement that does not add roof load or ventilation capacity;

(6) accessibility upgrades not involving building additions or structural alterations;

(7) remodeling that does not change the building's occupancy, structural system, exit access or discharge pattern, or mechanical load; and

(8) other projects determined to be reserved by the commissioner.

Subd. 4.Municipal fees.

Municipalities other than the state having an agreement under subdivision 2 with the commissioner for code administration and enforcement service for public buildings and state-licensed facilities or inspecting under authority of subdivision 3 shall charge their customary fees, including surcharge, to be paid directly to the jurisdiction by the applicant seeking authorization to construct a public building or a state-licensed facility.

Subd. 5.Municipal obligation.

An agreement with the commissioner under subdivision 2 or 3 must require the municipality to attend to applicable aspects of code administration and enforcement as described in the agreement and established by rule.

Subd. 6.Applicable code.

Administration and enforcement in a municipality under subdivisions 2 and 3 must apply any optional provisions of the State Building Code adopted by the municipality. A municipality adopting any optional code provision shall notify the state building official within 30 days of its adoption.

Subd. 7.Review of plans for public buildings and state licensed facilities.

Construction or remodeling may not begin on any public building or state licensed facility until the plans and specifications have been approved by the commissioner or municipality under contractual agreement pursuant to subdivision 1. The plans and specifications must be submitted for review, and within 30 days after receipt of the plans and specifications, the commissioner or municipality under contractual agreement shall notify the submitting authority of any corrections.

History:

1984 c 544 s 66; 1987 c 387 s 3; 1994 c 634 art 2 s 3,4; 1995 c 166 s 2; 1999 c 135 s 2; 1Sp2003 c 8 art 1 s 5; 2007 c 135 art 2 s 2; 2007 c 140 art 4 s 6,61; 2014 c 305 s 18-25

326B.108 PLACES OF PUBLIC ACCOMMODATION SUBJECT TO CODE.

Subdivision 1.Definition.

For purposes of this section, "place of public accommodation" means a publicly or privately owned facility that is designed for occupancy by 100 or more people and is a sports or entertainment arena, stadium, theater, community or convention hall, special event center, indoor amusement facility or water park, or indoor swimming pool.

Subd. 2.Application.

Construction, additions, and alterations to a place of public accommodation must be designed and constructed to comply with the State Building Code.

Subd. 3.Enforcement.

Effective July 1, 2017, in a municipality that has not adopted the code by ordinance under section 326B.121, subdivision 2, the commissioner shall enforce this section in accordance with section 326B.107, subdivision 1.

Subd. 4.Fire protection systems.

If fire protection systems regulated by chapter 299M are required in a place of public accommodation, then those plan reviews and inspections shall be conducted by the state fire marshal.

Subd. 5.Fire sprinklers required.

Automatic sprinkler systems for fire protection purposes are required in a place of public accommodation if, on or after August 1, 2008:

(1) the facility was constructed, added to, or altered; and

(2) the facility has an occupant load of 300 or more.

History:

2017 c 94 art 2 s 4; 1Sp2017 c 7 s 4; 1Sp2021 c 10 art 3 s 8-10

326B.109 RESTROOM FACILITIES.

Subdivision 1.Definition.

For purposes of this section, "place of public accommodation" means a publicly or privately owned sports or entertainment arena, stadium, theater, community or convention hall, special event center, amusement facility, or special event center in a public park, that is designed for occupancy by 200 or more people.

Subd. 2.Application.

This section applies only to a place of public accommodation for which construction, or alterations exceeding 50 percent of the estimated replacement value of the existing facility, occurs.

Subd. 3.Ratio.

In a place of public accommodation subject to this section, the ratio of water closets for women to the total of water closets and urinals provided for men must be at least three to two, unless there are two or fewer fixtures for men.

Subd. 4.Rules.

The commissioner shall adopt rules to implement this section. The rules may provide for a greater ratio of women's to men's facilities for certain types of occupancies than is required in subdivision 3, and may apply the required ratios to categories of occupancies other than those defined as places of public accommodation under subdivision 1.

History:

1994 c 632 art 3 s 34; 2007 c 140 art 4 s 7,61; art 13 s 4; 2015 c 54 art 5 s 11

326B.112 BLEACHER SAFETY.

Subdivision 1.Definitions.

(a) For purposes of this section, the following terms have the meanings given.

(b) "Place of public accommodation" means a public or privately owned sports or entertainment arena, gymnasium, auditorium, stadium, hall, special event center in a public park, or other facility for public assembly.

(c) "Bleacher" refers to any tiered or stepped seating facility, whether temporary or permanent, used in a place of public accommodation for the seating of its occupants.

Subd. 2.Application.

All places of public accommodation must comply with the provisions of this section.

Subd. 3.Safety requirements.

In places of public accommodation using bleacher seating, all bleachers or bleacher open spaces over 55 inches above grade or the floor below, and all bleacher guardrails if any part of the guardrail is over 30 inches above grade or the floor below must conform to the following safety requirements:

(1) the open space between bleacher footboards, seats, and guardrails must not exceed four inches, unless approved safety nets are installed, except that retractable bleachers already in place as of January 1, 2001, may have open spaces not exceeding nine inches and any bleachers owned by the University of Minnesota, the Minnesota State Colleges and Universities, or a private college or university may have open spaces not exceeding nine inches;

(2) bleachers must have vertical perimeter guardrails with no more than four-inch rail spacing between vertical rails or other approved guardrails that address climbability and are designed to prevent accidents; and

(3) the state building official shall determine whether the safety nets and guardrail climbability meet the requirements of the alternate design section of the State Building Code. All new bleachers manufactured, installed, sold, or distributed after January 1, 2001, must comply with the State Building Code in effect and this subdivision.

Subd. 4.Enforcement.

(a) A statutory or home rule charter city that does not have in effect an ordinance adopting the State Building Code is responsible for enforcement in the city of the code's requirements for bleacher safety. In all other areas where there is no ordinance in effect adopting the State Building Code, the county is responsible for enforcement of the code's requirements for bleacher safety.

(b) Municipalities that have not adopted the code may enforce the code requirements for bleacher safety by either entering into a joint powers agreement for enforcement with another municipality that has adopted the code or contracting for enforcement with a qualified and certified building official or state licensed design professional to enforce the code.

(c) Municipalities, school districts, organizations, individuals, and other persons operating or owning places of public accommodation with bleachers that are subject to the safety requirements in subdivision 3 shall provide a signed certification of compliance to the commissioner by January 1, 2002. For bleachers subject to the exception in subdivision 3, clause (1), entities covered by this paragraph must have on file a bleacher safety management plan and amortization schedule. The certification shall be prepared by a qualified and certified building official or state licensed design professional and shall certify that the bleachers have been inspected and are in compliance with the requirements of this section and are structurally sound. For bleachers owned by a school district or nonpublic school, the person the district or nonpublic school designates to be responsible for buildings and grounds may make the certification.

Subd. 5.Noncomplying bleachers prohibited.

The commissioner, in addition to other remedies provided for violations of this chapter, shall forbid use of bleachers not in compliance with this section.

Subd. 6.Periodic inspections.

Bleacher footboards and guardrails must be reinspected at least every five years and a structural inspection must be made at least every ten years. Inspections may be completed in the same manner as provided in subdivision 4. This section does not preclude a municipal authority from establishing additional reinspections under the State Building Code.

History:

1999 c 250 art 1 s 62; 2000 c 417 s 1,2; 2000 c 492 art 1 s 35,36; 1Sp2001 c 6 art 4 s 1; 2007 c 140 art 4 s 61; art 13 s 4; 2008 c 322 s 2

326B.115 [Repealed, 2010 c 280 s 40]

326B.118 ENERGY CODE.

The commissioner, in consultation with the Construction Codes Advisory Council, shall explore and review the availability and appropriateness of any model energy codes related to the construction of single one- and two-family residential buildings. In consultation with the council, the commissioner shall take steps to adopt the chosen code with all necessary and appropriate amendments.

The commissioner may not adopt all or part of a model energy code relating to the construction of residential buildings without research and analysis that addresses, at a minimum, air quality, building durability, moisture, enforcement, enforceability cost benefit, and liability. The research and analysis must be completed in cooperation with practitioners in residential construction and building science and an affirmative recommendation by the Construction Codes Advisory Council.

History:

2002 c 317 s 3; 2007 c 140 art 4 s 9,61; art 13 s 4; 2011 c 76 art 1 s 51

326B.121 STATE BUILDING CODE; APPLICATION AND ENFORCEMENT.

Subdivision 1.Application.

(a) The State Building Code is the standard that applies statewide for the construction, reconstruction, alteration, repair, and use of buildings and other structures of the type governed by the code.

(b) The State Building Code supersedes the building code of any municipality.

(c) The State Building Code does not apply to agricultural buildings except:

(1) with respect to state inspections required or rulemaking authorized by sections 103F.141; 216C.19, subdivision 9; and 326B.36; and

(2) translucent panels or other skylights without raised curbs shall be supported to have equivalent load-bearing capacity as the surrounding roof.

Subd. 1a.Municipal ordinance; completion of exterior work.

A municipality may by ordinance adopt an official control that requires exterior work authorized by a building permit issued in accordance with the State Building Code, to be completed within a specified number of days following issuance of the building permit. The local regulation may not require completion of exterior work earlier than 180 days following the issuance of the permit.

Subd. 2.Municipal enforcement.

(a) If, as of January 1, 2008, a municipality has in effect an ordinance adopting the State Building Code, that municipality must continue to administer and enforce the State Building Code within its jurisdiction. The municipality is prohibited from repealing its ordinance adopting the State Building Code. This paragraph does not apply to municipalities with a population of less than 2,500 according to the last federal census that are located outside of a metropolitan county, as defined in section 473.121, subdivision 4.

(b) If a municipality is not required by paragraph (a) to administer and enforce the State Building Code, the municipality may choose to administer and enforce the State Building Code within its jurisdiction by adopting the code by ordinance.

(c) A municipality must not by ordinance, or through development agreement, require building code provisions regulating components or systems of any structure that are different from any provision of the State Building Code. This subdivision does not prohibit a municipality from enacting or enforcing an ordinance requiring existing components or systems of any structure to be maintained in a safe and sanitary condition or in good repair, but not exceeding the standards under which the structure was built, reconstructed, or altered, or the component or system was installed, unless specific retroactive provisions for existing buildings have been adopted as part of the State Building Code. A municipality may, with the approval of the state building official, adopt an ordinance that is more restrictive than the State Building Code where geological conditions warrant a more restrictive ordinance. A municipality may appeal the disapproval of a more restrictive ordinance to the commissioner. An appeal under this subdivision is subject to the schedule, fee, procedures, cost provisions, and appeal rights set out in section 326B.139.

(d) A city may by ordinance and with permission of the township board extend the administration and enforcement of the code to contiguous unincorporated territory not more than two miles distant from its corporate limits in any direction if the code is not already administered and enforced in the territory. Where two or more noncontiguous cities, which have elected to administer and enforce the code, have boundaries less than four miles apart, each is authorized to enforce the code on its side of a line equidistant between them. Once enforcement authority is extended extraterritorially by ordinance, the authority may continue to be exercised in the designated territory even though another city less than four miles distant later elects to enforce the code. After the extension, the city may enforce the code in the designated area to the same extent as if the property were situated within its corporate limits. Enforcement of the code in an extended area outside a city's corporate limits includes all rules, laws, and ordinances associated with administration of the code.

(e) A city cannot commence administration and enforcement of the code outside of its jurisdiction until it has provided written notice to the commissioner, the county auditor, and the town clerk of each town in which it intends to administer and enforce the code. A public hearing on the proposed administration and enforcement must be held not less than 30 days after the notice has been provided. Administration and enforcement of the code by the city outside of its jurisdiction commences on a date determined by the city that is no less than 90 days nor more than one year after the public hearing.

(f) A municipality may enforce the State Building Code by any means that are convenient and lawful, including entering into contracts with other municipalities under section 471.59 and with qualified individuals. The other municipalities or qualified individuals may be reimbursed by retention or remission of some or all of the building permit fee collected or by other means. If a municipality has no qualified employees of the municipality or other municipalities or qualified individuals available to carry out inspection and enforcement, the commissioner shall train and designate individuals available to carry out inspection and enforcement. The commissioner may be reimbursed for the inspection by retention or remission of some or all of the building permit fee collected or by other means.

(g) Nothing in this subdivision prohibits a municipality from adopting ordinances relating to zoning, subdivision, or planning unless the ordinance conflicts with a provision of the State Building Code that regulates components or systems of any structure.

Subd. 3.Enforcement by state building official.

If the commissioner determines that a municipality that has adopted the State Building Code is not properly administering and enforcing the code, or if the commissioner determines that any municipality that is required by subdivision 2 to enforce any provision of the State Building Code is not properly enforcing that provision, the commissioner may have the administration and enforcement in the involved municipality undertaken by the state building official or by another building official certified by the state. The commissioner shall notify the affected municipality in writing immediately upon making the determination, and the municipality may challenge the determination as a contested case before the commissioner pursuant to the Administrative Procedure Act. In carrying out administration and enforcement under this subdivision, the commissioner shall apply any optional provision of the State Building Code adopted by the municipality. A municipality adopting any optional code provision shall notify the state building official within 30 days of its adoption. The commissioner shall determine appropriate fees to be charged for the administration and enforcement service rendered. Any cost to the state arising from the state administration and enforcement of the State Building Code shall be borne by the subject municipality where a fee has been collected by the municipality.

History:

1984 c 544 s 67; 1987 c 312 art 1 s 10 subd 1; 1990 c 391 art 8 s 2; 1994 c 634 art 2 s 5,10; 1999 c 135 s 3; 2001 c 207 s 3; 1Sp2003 c 8 art 1 s 6; 2007 c 140 art 4 s 61; art 5 s 32; art 13 s 4; 2008 c 322 s 3; 2009 c 86 art 1 s 59; 2010 c 183 s 3; 2010 c 308 s 1; 2011 c 20 s 2; 2013 c 85 art 2 s 9

326B.124 EXEMPTIONS.

(a) The commissioner may exempt a part of a historic building occupied by the state from the state or another building, fire, safety, or other code if the exemption is necessary to preserve the historic or esthetic character of the building or to prevent theft, vandalism, terrorism, or another crime. When the commissioner grants an exemption, the commissioner shall consider providing equivalent protection. A certificate of occupancy may not be denied because of an exemption under this section.

(b) The house of representatives and senate chambers located in the State Capitol are exempt from any State Building Code and State Fire Code requirements pertaining to: (1) door locks; (2) exit sign placement at exit access doors; and (3) occupancy limit signs. The house of representatives and senate may install door locks within their chambers in the State Capitol that meet their needs. The house of representatives and senate may install exit and occupancy limit signs within the house of representatives and senate chambers located in the State Capitol that are minimal in size and historic in appearance as appropriate for each chamber. Any door lock or sign installed by the house of representatives or the senate under the authority provided in this paragraph is not subject to the approval of the commissioner.

History:

1990 c 572 s 12; 2007 c 140 art 4 s 61; art 13 s 4; 1Sp2017 c 8 art 2 s 14; 2018 c 214 art 2 s 12

326B.125 EXEMPTION FOR MEMBERS OF FEDERALLY RECOGNIZED TRIBES.

(a) The commissioner of labor and industry may issue building-specific waivers from the State Building Code if there is conflict with a federally recognized Tribe's religious beliefs, traditional building practices, or established teachings. Both individual members of federally recognized Tribes, direct lineal descendents of federally recognized Tribes, and organizations of members of federally recognized Tribes may apply for these waivers.

(b) Waivers may only be granted for the following types of buildings:

(1) traditional residential buildings that will be used solely by an individual applicant's household or an organizational applicant's members;

(2) meeting houses; and

(3) one-room educational buildings.

(c) To obtain a waiver, an applicant must apply to the commissioner on a form established by the commissioner. The application must:

(1) identify the building the waiver will apply to;

(2) identify the Tribe the applicant is a member of; and

(3) declare that requirements of the State Building Code conflict with religious beliefs, traditional building practices, or established teachings of the identified Tribe, which the applicant adheres to.

(d) Any building for which a waiver is granted may not be sold or leased until:

(1) the building is brought into compliance with the version of the State Building Code in force at the time of the sale or lease; or

(2) the prospective buyer or lessee to which the building is being sold or leased to obtains a waiver under this section for the building.

History:

1Sp2021 c 11 art 2 s 19

326B.127 STATE BUILDING OFFICIAL.

Subdivision 1.Appointment.

The commissioner shall appoint a state building official who under the direction and supervision of the commissioner shall administer the code.

Subd. 2.Qualifications.

To be eligible for appointment as state building official an individual must be competent in the field of administration and shall have the experience in building design, construction, and supervision which the commissioner considers necessary.

Subd. 3.Powers and duties.

The state building official may, with the approval of the commissioner, employ personnel necessary to carry out the inspector's function under sections 326B.101 to 326B.194. The state building official shall perform other duties in administering the code assigned by the commissioner.

Subd. 4.Accessibility specialists.

The state building official shall, with the approval of the commissioner, assign three department employees to assist municipalities in complying with section 326B.106, subdivision 9.

Subd. 5.Interpretative authority.

To achieve uniform and consistent application of the State Building Code, the commissioner has final interpretative authority applicable to all codes adopted as part of the State Building Code except for the Plumbing Code, the Electrical Code, and the High Pressure Piping Code. A final interpretative committee composed of seven members, consisting of three building officials, two inspectors from the affected field, and two construction industry representatives, shall review requests for final interpretations relating to that field for which the commissioner has final interpretative authority. The Plumbing Board has final interpretative authority applicable to the State Plumbing Code and shall review requests for final interpretation made to the board that relate to the State Plumbing Code. The Board of Electricity has final interpretative authority applicable to the State Electrical Code and shall review requests for final interpretation made to the board that relate to the State Electrical Code. The Board of High Pressure Piping Systems has final interpretative authority applicable to the State High Pressure Piping Code and shall review requests for final interpretation made to the board that relate to the State High Pressure Piping Code. Except for requests for final interpretations that relate to the State Plumbing Code, the State Electrical Code, and the State High Pressure Piping Code, requests for final interpretation must come from a local or state level building code board of appeals. The commissioner must establish procedures for membership of the final interpretative committees. The appropriate committee shall review the request and make a recommendation to the commissioner for the final interpretation within 30 days of the request. The commissioner must issue a final interpretation within ten business days after the receipt of the recommendation from the final interpretative committee. The Plumbing Board, the Board of Electricity, or the Board of High Pressure Piping Systems shall review a request and issue a final interpretation within 30 days of the request. Any person aggrieved by a final interpretation may appeal the interpretation within 30 days of its issuance by the commissioner or the board in accordance with chapter 14. The final interpretation must be published within ten business days of its issuance and made available to the public. Municipal building officials shall administer all final interpretations issued by the commissioner, the Plumbing Board, the Board of Electricity, or the Board of High Pressure Piping Systems until the final interpretations are considered by the commissioner, the Plumbing Board, the Board of Electricity, or the Board of High Pressure Piping Systems for adoption as part of the State Building Code, State Plumbing Code, State Electrical Code, and the State High Pressure Piping Code.

History:

1984 c 544 s 68; 1986 c 444; 1991 c 345 art 1 s 66; 1994 c 634 art 2 s 10; 1995 c 254 art 2 s 7; 2001 c 207 s 4; 2007 c 135 art 3 s 1; 2007 c 140 art 4 s 10,61; art 13 s 4; 2010 c 280 s 10; 2017 c 68 art 1 s 5

326B.13 APPLICATION OF ADMINISTRATIVE PROCEDURE ACT.

Subdivision 1.Applicability.

Subject to this section, the adoption of the code and amendment is subject to the Administrative Procedure Act.

Subd. 2.Distribution of incorporations by reference.

The commissioner need not publish or distribute those parts of the code which are adopted by reference pursuant to section 14.07, subdivision 4.

Subd. 3.Filing.

All standards referred to in any model or statewide specialty code or any of the modifications of a code need not be filed with the secretary of state. All standards that are incorporated by reference into the code must be kept on file and available for inspection in the office of the commissioner.

Subd. 4.Consultation with commissioner required.

In no event may a state agency subsequently authorized to adopt rules involving State Building Code subject matter proceed to adopt the rules without prior consultation with the commissioner.

Subd. 5.Proposed amendments.

Any interested person may propose amendments to the code which may be either applicable to all municipalities or, where it is alleged and established that geological conditions exist within a municipality which are not generally found within other municipalities, amendments may be restricted in application to that municipality.

Subd. 6.Adoption.

The commissioner shall approve any proposed amendments deemed by the commissioner to be reasonable in conformity with the policy and purpose of the code and justified under the particular circumstances involved. The commissioner shall make an electronic version of amendments to the code available to municipalities. Upon request, a municipality may receive a paper copy of amendments to the code available for a fee prescribed by the commissioner.

Subd. 7.Investigation and research.

With the approval of the commissioner the state building official shall investigate or provide for investigations, or may accept authenticated reports from authoritative sources, concerning new materials or modes of construction intended for use in the construction of buildings or structures, and shall propose amendments to the code setting forth the conditions under which the new materials or modes may be used.

Subd. 8.Effective date of rules.

A rule to adopt or amend the State Building Code is effective 270 days after publication of the rule's notice of adoption in the State Register. The rule may provide for a later effective date. The rule may provide for an earlier effective date if the commissioner or board proposing the rule finds that an earlier effective date is necessary to protect public health and safety after considering, among other things, the need for time for training of individuals to comply with and enforce the rule. The commissioner must publish an electronic version of the entire adopted rule chapter on the department's website within ten days of receipt from the revisor of statutes. The commissioner shall clearly indicate the effective date of the rule on the department's website.

History:

1984 c 544 s 69; 1985 c 248 s 8; 1986 c 444; 1987 c 312 art 1 s 10 subd 1; 1994 c 634 art 2 s 10; 1999 c 135 s 4; 2007 c 140 art 4 s 11,61; art 13 s 4; 2008 c 337 s 1; 2010 c 280 s 11-14; 1Sp2011 c 4 art 3 s 7; 2015 c 54 art 1 s 7; 2016 c 189 art 8 s 1

326B.133 BUILDING OFFICIALS.

Subdivision 1.Designation.

Each municipality shall designate a building official to administer the code. A municipality may designate no more than one building official responsible for code administration defined by each certification category created by statute or rule. Two or more municipalities may combine in the designation of a building official for the purpose of administering the provisions of the code within their communities. In those municipalities for which no building officials have been designated, the state building official may use whichever state employees are necessary to perform the duties of the building official until the municipality makes a temporary or permanent designation. All costs incurred by virtue of these services rendered by state employees must be borne by the involved municipality and receipts arising from these services must be paid to the commissioner.

Subd. 2.Qualifications.

A building official, to be eligible for designation, must be certified and have the experience in design, construction, and supervision which the commissioner deems necessary and must be generally informed on the quality and strength of building materials, accepted building construction requirements, and the nature of equipment and needs conducive to the safety, comfort, and convenience of building occupants. No person may be designated as a building official for a municipality unless the commissioner determines that the official is qualified as provided in subdivision 3.

Subd. 2a.Application; renewal; fees; expiration.

(a) An applicant for certification shall submit a completed application on a form approved by the commissioner to the department. The commissioner shall review applications for compliance with the requirements established by rule.

(b) Application for initial certification or renewal certification as a building official, building official-limited, or accessibility specialist shall be according to this section and sections 326B.092 to 326B.095.

(c) Fees shall be paid to the department according to section 326B.092.

(d) Unless revoked or suspended under this chapter, all certifications issued or renewed under this section expire two years from the date of original issuance and every two years thereafter.

Subd. 3.Certification criteria.

The commissioner shall by rule establish certification criteria as proof of qualification pursuant to subdivision 2. The commissioner may:

(1) develop and administer written and practical examinations to determine if a person is qualified pursuant to subdivision 2 to be a building official;

(2) accept documentation of successful completion of testing programs developed and administered by nationally recognized testing agencies, as proof of qualification pursuant to subdivision 2; or

(3) determine qualifications by satisfactory completion of clause (2) and a mandatory training program developed or approved by the commissioner.

Upon a determination of qualification under clause (1), (2), or (3), the commissioner shall issue a certificate to the building official stating that the official is certified. The commissioner or a designee may establish categories of certification that will recognize the varying complexities of code enforcement in the municipalities within the state. The commissioner shall provide educational programs designed to train and assist building officials in carrying out their responsibilities.

Subd. 3a.Certification categories.

(a) If a municipality has adopted or adopts the State Building Code, the responsibilities for code administration and enforcement are under the authority of its designated building official or the certified building official-limited.

(b) Certified building official. This certification is identified as "certified building official" on the certificate card. This certification is granted to an individual who has met the certified building official requirements established by rule and passed the written examination prepared by the state. A person with this certification may serve as the designated building official for any municipality. For the purposes of calculating fees under section 326B.092, certification as a building official is a master license.

(c) Certified building official-limited. This certification is identified as "certified building official-limited" on the certification card. This certification is granted to an individual who has met the certified building official-limited requirements established by rule and passed the written examination prepared by the state. An individual with this certification may perform code administration for one- and two-family dwellings, their accessory structures, and "exempt classes of buildings" as provided in Minnesota Rules, part 1800.5000, of the Board of Architecture, Engineering, Land Surveying, Landscape Architecture, Geoscience, and Interior Design, and "facilities for persons with physical disabilities" that are governed by the State Building Code. Subject to the limitations of the building official-limited certification, an individual with this certification may serve as the designated building official for any municipality. Code administration for all other buildings must be performed by a certified building official as defined in paragraph (b). A certified building official-limited may conduct inspections for other structures regulated by the State Building Code under the direction of a designated certified building official or the state building official.

Subject to all other certification requirements, as of January 1, 2012, valid Class I certifications shall be included in the certified building official-limited category upon the next immediate renewal. For the purposes of calculating fees under section 326B.092, certification as a building official-limited is a journeyworker license.

(d) Accessibility specialist. This certification is identified as accessibility specialist on the certification card. This certification is granted to an individual who has met the "accessibility specialist" requirements established by rule and passed the written examination prepared by the state. An individual with this classification is limited to the administration of those provisions of the State Building Code that provide access for persons with disabilities. For the purposes of calculating fees under section 326B.092, certification as an accessibility specialist is a journeyworker license.

Subd. 4.Duties.

Building officials shall, in the municipality for which they are designated, be responsible for all aspects of code administration for which they are certified, including the issuance of all building permits and the inspection of all manufactured home installations. The commissioner may direct a municipality with a building official to perform services for another municipality, and in that event the municipality being served shall pay the municipality rendering the services the reasonable costs of the services. The costs may be subject to approval by the commissioner.

Subd. 5.Grounds.

The commissioner may use any enforcement provision in section 326B.082 against an applicant or individual holding a certificate, if the applicant or individual:

(1) violates a provision of sections 326B.101 to 326B.194 or a rule adopted under those sections; or

(2) engages in fraud, deceit, or misrepresentation while performing the duties of a certified building official.

Nothing in this subdivision limits or otherwise affects the authority of a municipality to dismiss or suspend a building official at its discretion, except as otherwise provided for by law.

Subd. 6.Action against unlicensed persons.

The commissioner may take any administrative action provided under section 326B.082, against an individual required to be certified under subdivision 3, based upon conduct that would provide grounds for action against a certificate holder under this section.

Subd. 7.Vacancies.

In the event that a designated building official position is vacant within a municipality, that municipality shall designate a certified building official to fill the vacancy as soon as possible. The commissioner must be notified of any vacancy or designation in writing within 15 days. If the municipality fails to designate a certified building official within 15 days of the occurrence of the vacancy, the state building official may provide state employees to serve that function as provided in subdivision 1 until the municipality makes a temporary or permanent designation. Municipalities must not issue permits without a designated certified building official.

Subd. 8.Continuing education requirements; extension of time.

(a) This subdivision establishes the number of continuing education hours required within each two-year certification period.

A certified building official shall accumulate 35 hours of continuing education in any education program that is approved under Minnesota Rules, part 1301.1000.

A certified building official-limited shall accumulate 35 hours of continuing education in any education program that is approved under Minnesota Rules, part 1301.1000.

An accessibility specialist must accumulate nine hours of approved continuing education hours in any of the education programs that are provided under Minnesota Rules, part 1301.1000, subpart 1 or 2. The nine hours must be in courses relating to building accessibility, plan review, field inspection, or building code administration.

Continuing education programs may be approved as established in rule.

(b) Subject to sections 326B.101 to 326B.194, the commissioner may by rule establish or approve continuing education programs for certified building officials dealing with matters of building code administration, inspection, and enforcement.

Each person certified as a building official for the state must satisfactorily complete applicable educational programs established or approved by the commissioner to renew certification.

(c) The state building official may grant an extension of time to comply with continuing education requirements if the certificate holder requesting the extension of time shows cause for the extension. The request for the extension must be in writing. For purposes of this section, the certificate holder's current certification effective dates shall remain the same. The extension does not relieve the certificate holder from complying with the continuing education requirements for the next two-year period.

Subd. 9.

[Repealed, 2010 c 347 art 3 s 75]

Subd. 10.

[Repealed, 2010 c 347 art 3 s 75]

Subd. 11.Failure to renew.

An individual who has failed to make a timely application for renewal of a certificate is not certified and must not serve as the designated building official for any municipality, or a certified building official, a certified building official-limited, or an accessibility specialist until a renewed certificate has been issued by the commissioner.

History:

1984 c 544 s 70; 1984 c 578 s 1; 1984 c 655 art 2 s 13 subd 1; 1Sp1985 c 17 s 6; 1986 c 444; 1988 c 613 s 16; 1995 c 254 art 2 s 8-11; 1998 c 359 s 11,12; 1Sp2001 c 10 art 2 s 30; 2002 c 220 art 10 s 30,31; 2007 c 135 art 2 s 3; 2007 c 140 art 4 s 12,61; art 13 s 4; 2008 c 337 s 63; 2010 c 280 s 15; 2010 c 347 art 3 s 12-17,75,76; 2010 c 385 s 6; 2017 c 68 art 1 s 6,26; 1Sp2017 c 7 s 8; 1Sp2021 c 10 art 3 s 11

326B.135 CONSTRUCTION CODE INSPECTORS.

Subdivision 1.Competency criteria.

The commissioner of labor and industry shall adopt rules establishing required competency criteria for individuals serving as construction code inspectors. For the purpose of this section, "construction code inspectors" means building inspectors, mechanical inspectors, plumbing inspectors, and combination inspectors under the supervision of the building official. Required competency criteria shall be relevant to the building, mechanical, and plumbing codes as adopted in Minnesota.

Subd. 2.Continuing education.

The commissioner of labor and industry shall adopt rules establishing or approving education programs for construction inspectors related to construction inspection and administration of the State Building Code. Each construction code inspector must satisfactorily complete continuing education requirements as established in rule by the commissioner.

Subd. 3.Exemption.

A person holding current certification as a building official under section 326B.133 is exempt from this section.

Subd. 4.Effective date.

All construction inspectors shall, within one year of hire, be in compliance with the competency criteria established according to subdivision 1.

History:

2006 c 202 s 1; 2008 c 337 s 64; 2015 c 54 art 5 s 12

326B.136 CERTAIN INSPECTIONS.

The state building official may, upon an application setting forth a set of plans and specifications that will be used in more than one municipality to acquire building permits, review and approve the application for the construction or erection of any building or structure designed to provide dwelling space for no more than two families if the set of plans meets the requirements of the State Building Code. All costs incurred by the state building official by virtue of the examination of the set of plans and specifications must be paid by the applicant. A building official shall issue a building permit upon application and presentation to the official of a set of plans and specifications bearing the approval of the state building official if the requirements of all other local ordinances are satisfied.

History:

1984 c 544 s 71; 1986 c 444; 1994 c 634 art 2 s 6,10; 2007 c 140 art 4 s 61; art 13 s 4

326B.139 APPEALS.

A person aggrieved by the final decision of any local or state level board of appeals as to the application of the code, including any rules adopted under section 471.469, may, within 180 days of the decision, appeal to the commissioner. Appellant shall submit a nonrefundable fee of $70, payable to the commissioner, with the request for appeal. An appeal must be heard as a contested case under chapter 14. The commissioner shall submit written findings to the parties. The party not prevailing shall pay the costs of the contested case hearing, including fees charged by the Office of Administrative Hearings and the expense of transcript preparation. Costs under this section do not include attorney fees. Any person aggrieved by a ruling of the commissioner may appeal in accordance with chapter 14. For the purpose of this section "any person aggrieved" includes the Council on Disability. No fee or costs shall be required when the council on disability is the appellant.

History:

1984 c 544 s 72; 1986 c 444; 1987 c 354 s 4; 1988 c 613 s 17; 1995 c 254 art 2 s 12; 2007 c 140 art 4 s 61; art 13 s 4; 2010 c 280 s 16; 2015 c 54 art 5 s 13

326B.142 CERTAIN CERTIFICATES.

Building certificates of occupancy validly issued before July 1, 1972, are valid after that date.

History:

1984 c 544 s 73; 2007 c 140 art 4 s 61; art 13 s 4; 2010 c 280 s 17

326B.145 ANNUAL REPORT.

Each municipality shall annually report by June 30 to the department, in a format prescribed by the department, all construction and development-related fees collected by the municipality from developers, builders, and subcontractors if the cumulative fees collected exceeded $5,000 in the reporting year, except that, for reports due June 30, 2009, to June 30, 2013, the reporting threshold is $10,000. The report must include:

(1) the number and valuation of units for which fees were paid;

(2) the amount of building permit fees, plan review fees, administrative fees, engineering fees, infrastructure fees, and other construction and development-related fees; and

(3) the expenses associated with the municipal activities for which fees were collected.

A municipality that fails to report to the department in accordance with this section is subject to the remedies provided by section 326B.082.

History:

2001 c 207 s 6; 2003 c 6 s 1; 2007 c 140 art 4 s 61; art 13 s 4; 2009 c 152 s 4; 2010 c 280 s 18

326B.148 SURCHARGE.

Subdivision 1.Computation.

To defray the costs of administering sections 326B.101 to 326B.194, a surcharge is imposed on all permits issued by municipalities in connection with the construction of or addition or alteration to buildings and equipment or appurtenances after June 30, 1971. The commissioner may use any surplus in surcharge receipts to award grants for code research and development and education.

If the fee for the permit issued is fixed in amount the surcharge is equivalent to one-half mill (.0005) of the fee or $1, except that effective July 1, 2010, until June 30, 2015, the permit surcharge is equivalent to one-half mill (.0005) of the fee or $5, whichever amount is greater. For all other permits, the surcharge is as follows:

(1) if the valuation of the structure, addition, or alteration is $1,000,000 or less, the surcharge is equivalent to one-half mill (.0005) of the valuation of the structure, addition, or alteration;

(2) if the valuation is greater than $1,000,000, the surcharge is $500 plus two-fifths mill (.0004) of the value between $1,000,000 and $2,000,000;

(3) if the valuation is greater than $2,000,000, the surcharge is $900 plus three-tenths mill (.0003) of the value between $2,000,000 and $3,000,000;

(4) if the valuation is greater than $3,000,000, the surcharge is $1,200 plus one-fifth mill (.0002) of the value between $3,000,000 and $4,000,000;

(5) if the valuation is greater than $4,000,000, the surcharge is $1,400 plus one-tenth mill (.0001) of the value between $4,000,000 and $5,000,000; and

(6) if the valuation exceeds $5,000,000, the surcharge is $1,500 plus one-twentieth mill (.00005) of the value that exceeds $5,000,000.

Subd. 2.Collection and reports.

All permit surcharges must be collected by each municipality and a portion of them remitted to the state. Each municipality having a population greater than 20,000 people shall prepare and submit to the commissioner once a month a report of fees and surcharges on fees collected during the previous month but shall retain the greater of two percent or that amount collected up to $25 to apply against the administrative expenses the municipality incurs in collecting the surcharges. All other municipalities shall submit the report and surcharges on fees once a quarter but shall retain the greater of four percent or that amount collected up to $25 to apply against the administrative expenses the municipalities incur in collecting the surcharges. The report, which must be in a form prescribed by the commissioner, must be submitted together with a remittance covering the surcharges collected by the 15th day following the month or quarter in which the surcharges are collected.

A municipality that fails to report or submit the required remittance to the department in accordance with this subdivision is subject to the remedies provided by section 326B.082.

Subd. 3.Revenue to equal costs.

Revenue received from the surcharge imposed in subdivision 1 should approximately equal the cost, including the overhead cost, of administering sections 326B.101 to 326B.194.

History:

1984 c 544 s 75; 1Sp1985 c 13 s 127; 1989 c 303 s 1; 1989 c 335 art 4 s 11; 1991 c 2 art 7 s 5; 1994 c 634 art 2 s 7; 1995 c 254 art 2 s 13; 1997 c 202 art 2 s 26; 1Sp2001 c 10 art 2 s 31; 2002 c 317 s 2; 2007 c 135 art 2 s 5; 2007 c 140 art 4 s 13,61; art 13 s 4; 2009 c 101 art 2 s 109; 2010 c 215 art 8 s 10; 2010 c 280 s 19,20; 1Sp2011 c 4 art 3 s 8; 2012 c 289 s 5

326B.151 PERMIT FEES, TO WHOM APPLICABLE.

If a municipality is enforcing the State Building Code, the municipality's building official shall administer and enforce the State Building Code with respect to all subject structures constructed within the municipality's jurisdiction, including all buildings constructed by municipalities other than the state and the University of Minnesota. These governmental bodies shall pay the building permit fees and surcharges that the inspecting municipality customarily imposes for its administration and enforcement of the code.

History:

1984 c 544 s 76; 1987 c 387 s 4; 2007 c 140 art 4 s 61; art 13 s 4; 2008 c 322 s 4

326B.153 BUILDING PERMIT FEES.

Subdivision 1.Building permits.

(a) Fees for building permits submitted as required in section 326B.107 include:

(1) the fee as set forth in the fee schedule in paragraph (b) or as adopted by a municipality; and

(2) the surcharge required by section 326B.148.

(b) The total valuation and fee schedule is:

(1) $1 to $500, $29.50;

(2) $501 to $2,000, $28 for the first $500 plus $3.70 for each additional $100 or fraction thereof, to and including $2,000;

(3) $2,001 to $25,000, $83.50 for the first $2,000 plus $16.55 for each additional $1,000 or fraction thereof, to and including $25,000;

(4) $25,001 to $50,000, $464.15 for the first $25,000 plus $12 for each additional $1,000 or fraction thereof, to and including $50,000;

(5) $50,001 to $100,000, $764.15 for the first $50,000 plus $8.45 for each additional $1,000 or fraction thereof, to and including $100,000;

(6) $100,001 to $500,000, $1,186.65 for the first $100,000 plus $6.75 for each additional $1,000 or fraction thereof, to and including $500,000;

(7) $500,001 to $1,000,000, $3,886.65 for the first $500,000 plus $5.50 for each additional $1,000 or fraction thereof, to and including $1,000,000; and

(8) $1,000,001 and up, $6,636.65 for the first $1,000,000 plus $4.50 for each additional $1,000 or fraction thereof.

(c) Other inspections and fees are:

(1) inspections outside of normal business hours (minimum charge two hours), $63.25 per hour;

(2) reinspection fees, $63.25 per hour;

(3) inspections for which no fee is specifically indicated (minimum charge one-half hour), $63.25 per hour; and

(4) additional plan review required by changes, additions, or revisions to approved plans (minimum charge one-half hour), $63.25 per hour.

(d) If the actual hourly cost to the jurisdiction under paragraph (c) is greater than $63.25, then the greater rate shall be paid. Hourly cost includes supervision, overhead, equipment, hourly wages, and fringe benefits of the employees involved.

[See Note.]

Subd. 2.Plan review.

Fees for the review of building plans, specifications, and related documents submitted as required by section 326B.106 must be paid based on 65 percent of the building permit fee required in subdivision 1.

Subd. 3.Surcharge.

Surcharge fees are required for permits issued on all buildings including public buildings and state licensed facilities as required by section 326B.148.

Subd. 4.Distribution.

(a) This subdivision establishes the fee distribution between the state and municipalities contracting for plan review and inspection of public buildings and state licensed facilities.

(b) If plan review and inspection services are provided by the state building official, all fees for those services must be remitted to the state.

(c) If plan review services are provided by the state building official and inspection services are provided by a contracting municipality:

(1) the state shall charge 75 percent of the plan review fee required by the state's fee schedule in subdivision 2; and

(2) the municipality shall charge 25 percent of the plan review fee required by the municipality's adopted fee schedule, for orientation to the plans, in addition to the permit and other customary fees charged by the municipality.

(d) If plan review and inspection services are provided by the contracting municipality, all fees for those services must be remitted to the municipality in accordance with their adopted fee schedule.

History:

2009 c 78 art 5 s 11; 2017 c 94 art 2 s 5

NOTE: The amendments to subdivision 1, paragraph (b), by Laws 2017, chapter 94, article 2, section 5, expire October 1, 2021. Laws 2017, chapter 94, article 2, section 5, the effective date.

Note: The language of subdivision 1 reflects the expiration of the amendment in Laws 2017, chapter 94, article 2, section 5.

326B.16 ENFORCEMENT OF REQUIREMENTS FOR PERSONS WITH DISABILITIES.

Subdivision 1.Application.

The State Building Code's requirements for persons with disabilities apply statewide. A statutory or home rule charter city that does not have in effect an ordinance adopting the State Building Code is responsible for enforcement in the city of the State Building Code's requirements for persons with disabilities. In all other areas where there is no ordinance in effect adopting the State Building Code, the county is responsible for enforcement of the State Building Code's requirements for persons with disabilities.

Subd. 2.Municipal enforcement.

Municipalities which have not adopted the State Building Code shall enforce the State Building Code's requirements for persons with disabilities by: (1) entering into a joint powers agreement for enforcement with another municipality which has adopted the State Building Code; (2) contracting for enforcement with an individual certified under section 326B.133, subdivision 3, to enforce the State Building Code; or (3) hiring or training their own staff.

Subd. 3.Responsibilities.

Municipalities shall fulfill code responsibilities including duties and responsibilities for code administration, plan review, and inspection in accordance with the procedures established in the State Building Code.

Subd. 4.Enforcement by state building official.

If the commissioner determines that a municipality is not properly administering and enforcing the State Building Code's requirements for persons with disabilities, the commissioner may have the administration and enforcement in the involved municipality undertaken by the state building official or by another building official certified by the state. The commissioner shall notify the affected municipality in writing immediately upon making the determination, and the municipality may challenge the determination as a contested case before the commissioner pursuant to the Administrative Procedure Act. The commissioner shall charge the fees set by section 326B.153 for the administration and enforcement service rendered. Any cost to the state arising from the state administration and enforcement of the State Building Code shall be borne by the subject municipality.

History:

1998 c 359 s 14; 2005 c 56 s 1; 2007 c 140 art 4 s 16,61; art 13 s 4; 2008 c 322 s 5; 2010 c 347 art 3 s 18

ELEVATORS

326B.163 DEFINITIONS; ELEVATORS.

Subdivision 1.Applicability.

For the purposes of sections 326B.106 and 326B.163 to 326B.187, the terms defined in this section shall have the meanings given them.

Subd. 2.Passenger or freight elevator.

"Passenger or freight elevator" means all elevators except those that comply with the safety rules of the department relating to construction and installation and that have automatic operation or continuous pressure operation.

Subd. 3.Automatic operation.

Automatic operation shall mean operation wherein the starting of the elevator car is effected in response to momentary actuation of operating devices at the landing or of operating devices in the car identified with the landings, or both, or in response to an automatic starting mechanism and wherein the car is stopped automatically at the landings.

Subd. 4.Continuous pressure operation.

Continuous pressure operation shall mean operation by means of buttons or switches in the car and at the landing, any one of which may be used to control the movement of the car as long as the button or switch is manually maintained in the actuating position.

Subd. 5.Elevator.

As used in this chapter, "elevator" means moving walks and vertical transportation devices such as escalators, passenger elevators, freight elevators, dumbwaiters, hand-powered elevators, endless belt lifts, and wheelchair platform lifts. Elevator does not include external temporary material lifts or temporary construction personnel elevators at sites of construction of new or remodeled buildings.

Subd. 6.Municipality.

"Municipality," as used in sections 326B.163 to 326B.187, means a city, county, or town meeting the requirements of section 368.01, subdivision 1.

Subd. 7.Elevator inspection.

"Elevator inspection" means an examination of elevator installations, repairs, alterations, removal, and construction for compliance with the State Building Code that may include witnessing tests performed on elevators by elevator personnel, performing tests on elevators, or an audit of records related to routine and periodic maintenance and testing, or any combination thereof when performed by the department or a municipality authorized to perform such inspections.

Subd. 8.Elevator inspector.

"Elevator inspector" means an individual who meets the requirements established pursuant to section 326B.187, clause (1), who is performing elevator inspections for the department or a municipality authorized to perform such inspections.

Subd. 9.Direct supervision.

"Direct supervision" means:

(1) an unlicensed individual is being directly supervised by an individual licensed to perform the elevator work being supervised during the entire time the unlicensed individual is performing elevator work;

(2) the licensed individual is physically present at the location where the unlicensed individual is performing elevator work and immediately available to the unlicensed individual at all times for assistance and direction;

(3) the licensed individual shall review the elevator work performed by the unlicensed individual before the elevator work is operated; and

(4) the licensed individual is able to and does determine that all elevator work performed by the unlicensed individual is performed in compliance with the elevator code.

Subd. 10.Elevator contractor.

"Elevator contractor" means a licensed contractor whose responsible licensed individual is a master elevator constructor. An elevator contractor license does not itself qualify its holder to perform or supervise elevator work authorized by holding a personal license issued by the commissioner.

Subd. 11.Limited elevator contractor.

"Limited elevator contractor" means a licensed contractor whose responsible licensed individual is a limited master elevator constructor. A limited elevator contractor or its employees may only install, test, or alter residential elevators, platform lifts, stairway chairlifts, dumbwaiters, material lifts, limited use or limited application elevator equipment, conveyors, and special purpose personnel elevators.

Subd. 12.Limited elevator work.

"Limited elevator work" means the installing, maintaining, altering, repairing, testing, planning, or laying out of residential elevators, platform lifts, stairway chairlifts, dumbwaiters, material lifts, limited use or limited application elevator equipment, conveyors, and special purpose personnel elevators as covered by Minnesota Rules, chapters 1307 and 1315. Limited elevator work also includes electrical wiring on the load side of the elevator equipment disconnect and the decommissioning of elevator equipment to enable safe removal.

Subd. 13.Elevator work.

"Elevator work" means the installing, maintaining, altering, repairing, testing, planning, or laying out of elevator apparatus or equipment as covered by Minnesota Rules, chapters 1307 and 1315. Elevator work also includes the disconnection of electrical wiring on the load side of the elevator equipment disconnect and the decommissioning of elevator equipment to enable safe removal.

Subd. 14.Master elevator constructor.

"Master elevator constructor" means an individual having the necessary qualifications, training, experience, and technical knowledge to properly plan, lay out, supervise, and perform the installation, maintenance, altering, testing, wiring, and repair of apparatus and equipment for elevators, including electrical wiring on the load side of the elevator equipment disconnect and who is licensed as a master elevator constructor by the commissioner.

Subd. 15.Limited master elevator constructor.

"Limited master elevator constructor" means an individual having the necessary qualifications, training, experience, and technical knowledge to properly plan, lay out, supervise, and perform the testing, altering, installation, maintenance, and repair of wiring, apparatus, and equipment for residential elevators, platform lifts, stairway chairlifts, dumbwaiters, material lifts, limited use or limited application elevator equipment, conveyors, and special purpose personnel elevators, including wiring on the load side of the elevator equipment disconnect and who is licensed as a limited master elevator constructor by the commissioner.

Subd. 16.Limited journeyworker elevator constructor.

"Limited journeyworker elevator constructor" means an individual having the necessary qualifications, training, experience, and technical knowledge to install, maintain, alter, test, and repair apparatus and equipment for residential elevators, platform lifts, stairway chairlifts, dumbwaiters, material lifts, limited use or limited application elevator equipment, conveyors, and special purpose personnel elevators, including electrical wiring on the load side of the elevator equipment disconnect and who is licensed as a limited journeyworker elevator constructor by the commissioner.

Subd. 17.Journeyworker elevator constructor.

"Journeyworker elevator constructor" means an individual having the necessary qualifications, training, experience, and technical knowledge to install, maintain, alter, test, and repair apparatus and equipment for elevators, including electrical wiring on the load side of the elevator equipment disconnect and who is licensed as a journeyworker elevator constructor by the commissioner.

Subd. 18.Registered unlicensed elevator constructor.

"Registered unlicensed elevator constructor" means an individual who has registered with the department but is not licensed by the commissioner to perform elevator work.

Subd. 19.Residential dwelling.

"Residential dwelling" is a single dwelling unit that is contained in a one-family, two-family, or multifamily dwelling. A residential dwelling also includes outdoor space at a one-family dwelling.

Subd. 20.Responsible licensed individual.

"Responsible licensed individual" means an individual licensed as a master elevator constructor or limited master elevator constructor who is identified as the responsible licensed individual on an elevator contractor license application.

History:

1955 c 561 s 1; Ex1967 c 1 s 6; 1985 c 248 s 70; 1989 c 303 s 5,6; 1995 c 166 s 5,6,17; 2007 c 140 art 4 s 17-20, 61; art 13 s 4; 2009 c 76 s 1; 2010 c 282 s 1; 2013 c 85 art 2 s 10-21; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

326B.164 LICENSES.

Subdivision 1.Master elevator constructor.

(a) Except as otherwise provided by law, no individual shall perform or supervise elevator work, unless:

(1) the individual is licensed by the commissioner as a master elevator constructor; and

(2) the elevator work is for a licensed elevator contractor and the individual is an employee, partner, or officer of, or is the licensed contractor.

(b) An applicant for a master elevator constructor license shall:

(1) have at least one year of experience, acceptable to the commissioner, as a licensed journeyworker elevator constructor; or

(2) have at least six years' experience, acceptable to the commissioner, in planning for, laying out, supervising, and installing apparatus, equipment, and wiring for elevators.

(c) Except for the initial license term, as a condition of license renewal, master elevator constructors must attain a minimum of 16 hours of continuing education credit approved by the commissioner every renewal period. Not less than 12 hours shall be based on the Minnesota Elevator Code or elevator technology, and not less than four hours shall be based on the National Electrical Code.

Subd. 2.Limited master elevator constructor.

(a) Except as otherwise provided by law, no individual shall perform or supervise elevator work on residential elevators, platform lifts, stairway chairlifts, dumbwaiters, material lifts, limited use or limited application elevator equipment, conveyors, and special purpose personnel elevators, unless:

(1) the individual is licensed by the commissioner as a limited master elevator constructor; and

(2) the elevator work is for a limited elevator contractor and the individual is an employee, partner, or officer of, or is the licensed contractor.

(b) An applicant for a limited master elevator constructor license shall have at least three years of experience, acceptable to the commissioner, in installing apparatus, equipment, and wiring for elevators.

(c) Except for the initial license term, as a condition of license renewal, limited master elevator constructors must attain a minimum of eight hours of continuing education credit approved by the commissioner every renewal period. Not less than six hours shall be based on the Minnesota Elevator Code or elevator technology, and not less than two hours on the National Electrical Code.

Subd. 3.Journeyworker elevator constructor.

(a) Except as otherwise provided by law, no individual shall perform and supervise elevator work except for planning or laying out of elevator work, unless:

(1) the individual is licensed by the commissioner as a journeyworker elevator constructor; and

(2) the elevator work is for an elevator contractor, and the individual is an employee, partner, or officer of the licensed elevator contractor.

(b) An applicant for a journeyworker elevator constructor license shall have completed a four-year elevator mechanics apprenticeship registered with the United States Department of Labor or worked at least 9,000 hours in five consecutive years for a licensed elevator contractor, acceptable to the commissioner, installing, maintaining, modernizing, testing, wiring, and repairing elevators.

(c) As a condition of license renewal, journeyworker elevator constructors must attain a minimum of 16 hours of continuing education credit approved by the commissioner every renewal period. Not less than 12 hours shall be based on the Minnesota Elevator Code or elevator technology, and not less than four hours shall be based on the National Electrical Code.

Subd. 4.Limited journeyworker elevator constructor.

(a) Except as otherwise provided by law, no individual shall perform or supervise elevator work on residential elevators, platform lifts, stairway chairlifts, dumbwaiters, material lifts, limited use or limited application elevator equipment, conveyors, and special purpose personnel elevators, except for planning or laying out of elevator work, unless:

(1) the individual is licensed by the commissioner as a limited journeyworker elevator constructor; and

(2) the elevator work is for a limited elevator contractor or an elevator contractor, and the individual is an employee, partner, or officer of the licensed limited elevator contractor or licensed elevator contractor.

(b) An applicant for a limited journeyworker elevator constructor license shall have at least two years of experience, acceptable to the commissioner, in installing apparatus, equipment, and wiring for elevators.

(c) Except for the initial license term, as a condition of license renewal, limited journeyworker elevator constructors must attain a minimum of eight hours of continuing education credit approved by the commissioner every renewal period. Not less than six hours shall be based on the Minnesota Elevator Code or elevator technology, and not less than two hours on the National Electrical Code.

Subd. 5.Registered unlicensed elevator constructor.

(a) An unlicensed individual shall not perform elevator work, unless the individual has first registered with the department as an unlicensed elevator constructor. Except as allowed by subdivision 12, a registered unlicensed elevator constructor shall not perform elevator work unless the work is performed under the direct supervision of an individual actually licensed to perform such work. The licensed elevator constructor and the registered unlicensed elevator constructor must be employed by the same employer. Unlicensed individuals shall not supervise the performance of elevator work or make assignments of elevator work to unlicensed individuals. Licensed elevator constructors shall provide direct supervision for no more than two registered unlicensed elevator constructors.

(b) Notwithstanding any other provision of this section, no individual other than a master elevator constructor or limited master elevator constructor shall plan or lay out elevator wiring, apparatus, or equipment.

(c) Contractors employing registered unlicensed elevator constructors performing elevator work shall maintain records establishing compliance with this subdivision that shall identify all unlicensed individuals performing elevator work and shall permit the department to examine and copy all such records.

(d) When a licensed elevator constructor supervises the elevator work of an unlicensed individual, the licensed elevator constructor is responsible for ensuring that the elevator work complies with this section and the Minnesota Elevator Code.

(e) A registered unlicensed elevator constructor with a minimum of one year experience may perform the following maintenance tasks for elevator equipment without being provided with direct supervision: oiling, cleaning, greasing, painting, relamping, and replacing of escalator and moving walk comb teeth.

Subd. 6.Registration of unlicensed individuals.

(a) Unlicensed individuals performing elevator work for a contractor shall register with the department in the manner prescribed by the commissioner. Experience credit for elevator work performed in Minnesota after January 1, 2009, by an applicant for a license identified in this section shall not be granted where the applicant has not registered with the department or is not licensed by the department.

(b) As a condition of renewal of registration, unlicensed individuals shall attain a minimum of two hours of continuing education credit, approved by the commissioner, every renewal period. The continuing education course shall be based on the Minnesota Elevator Code or elevator technology.

Subd. 7.Contractor's license required.

No individual, other than an employee, partner, or officer of a licensed contractor, as defined by section 326B.163, subdivision 10, shall perform or offer to perform elevator work with or without compensation, unless the individual obtains a contractor's license. A contractor's license does not of itself qualify its holder to perform or supervise the elevator work authorized by holding any class of personal license.

Subd. 8.Bond required.

As a condition of licensing, each contractor shall give and maintain bond to the state in the penal sum of $25,000. The bond must comply with section 326B.0921.

Subd. 9.Insurance required.

Each elevator contractor shall have and maintain in effect general liability insurance, which includes premises and operations insurance and products and completed operations insurance, with limits of at least $100,000 per occurrence, $300,000 aggregate limit for bodily injury, and property damage insurance with limits of at least $50,000, or a policy with a single limit for bodily injury and property damage of $300,000 per occurrence and $300,000 aggregate limits. The insurance shall be written by an insurer licensed to do business in the state of Minnesota, and each contractor shall maintain on file with the commissioner a certificate evidencing such insurance. In the event of a policy cancellation, the insurer shall send written notice to the commissioner at the same time that a cancellation request is received from or a notice is sent to the insured.

Subd. 10.Employment of responsible individual.

(a) Each elevator contractor must designate a responsible master elevator constructor or limited master elevator constructor who shall be the responsible individual for the performance of all elevator work in accordance with the requirements of sections 326B.163 to 326B.191, all rules adopted under these sections, and all orders issued under section 326B.082. The classes of work that a licensed contractor is authorized to perform shall be limited to the classes of work that the responsible individual is allowed to perform.

(b) When a contractor's license is held by an individual, sole proprietorship, partnership, limited liability company, or corporation, and the individual, proprietor, one of the partners, one of the members, or an officer of the corporation, respectively, is not the responsible master elevator constructor or limited master elevator constructor, all elevator permits shall be submitted by the responsible master elevator constructor or limited master elevator constructor. If the contractor is an individual or a sole proprietorship, the responsible master or limited master elevator constructor must be the individual, proprietor, or managing employee. If the contractor is a partnership, the responsible master or limited master elevator constructor must be a general partner or managing employee. If the licensed contractor is a limited liability company, the responsible master or limited master elevator constructor must be a chief manager or managing employee. If the contractor is a corporation, the responsible master or limited master elevator constructor must be an officer or managing employee. If the responsible master or limited master elevator constructor is a managing employee, the responsible individual must be actively engaged in performing elevator work on behalf of the contractor and cannot be employed in any capacity performing elevator work for any other elevator contractor or employer. An individual may be the responsible individual for only one contractor.

(c) All applications and renewals for contractor licenses shall include a verified statement that the applicant and responsible individual are in compliance with this subdivision.

Subd. 11.Examination.

In addition to the other requirements described in this section and sections 326B.091 to 326B.098, as a precondition to issuance of a personal license, each applicant must pass a written or oral examination developed and administered by the commissioner to ensure the competence of each applicant for license. An oral examination shall be administered only to an applicant who furnishes a written statement from a certified teacher or other professional, trained in the area of reading disabilities, stating that the applicant has a specific reading disability that would prevent the applicant from performing satisfactorily on a written test. The oral examination shall be structured so that an applicant who passes the examination will not impair the applicant's own safety or that of others while acting as a licensed individual.

Subd. 12.License, registration, and renewal fees; expiration.

(a) Unless revoked or suspended under this chapter, all licenses issued or renewed under this section expire on the following schedule:

(1) master licenses expire March 1 of each odd-numbered year after issuance or renewal;

(2) elevator contractor licenses expire March 1 of each even-numbered year after issuance or renewal;

(3) journeyworker elevator constructor licenses expire two years from the date of original issuance and every two years thereafter; and

(4) registrations of unlicensed individuals expire one year from the date of original issuance and every year thereafter.

(b) For purposes of calculating license fees and renewal license fees required under section 326B.092:

(1) the registration of an unlicensed individual under subdivision 5 shall be considered an entry-level license;

(2) the journeyworker elevator constructor and the limited journeyworker elevator constructor shall be considered a journeyworker license;

(3) the master elevator constructor and limited master elevator constructor licenses shall be considered master licenses; and

(4) an elevator contractor license shall be considered a business license.

Subd. 13.Exemption from licensing.

Employees of a licensed elevator contractor or licensed limited elevator contractor are not required to hold or obtain a license under this section or be provided with direct supervision by a licensed master elevator constructor, licensed limited master elevator constructor, licensed elevator constructor, or licensed limited elevator constructor to install, maintain, or repair platform lifts and stairway chairlifts. Unlicensed employees performing elevator work under this exemption must comply with subdivision 5. This exemption does not include the installation, maintenance, repair, or replacement of electrical wiring for elevator equipment.

Subd. 14.Reciprocity.

(a) The commissioner may enter into reciprocity agreements for personal licenses with another state and issue a personal license without requiring the applicant to pass an examination provided the applicant:

(1) submits an application under this section;

(2) pays the application and examination fee and license fee required under section 326B.092; and

(3) holds a valid comparable license in the state participating in the agreement.

(b) Reciprocity agreements are subject to the following:

(1) the parties to the agreement must administer a statewide licensing program that includes examination and qualifying experience or training comparable to Minnesota's;

(2) the experience and training requirements under which an individual applicant qualified for examination in the qualifying state must be deemed equal to or greater than required for an applicant making application in Minnesota at the time the applicant acquired the license in the qualifying state;

(3) the applicant must have acquired the license in the qualifying state through an examination deemed equivalent to the same class of license examination in Minnesota. A lesser class of license may be granted where the applicant has acquired a greater class of license in the qualifying state, and the applicant otherwise meets the conditions of this subdivision;

(4) at the time of application, the applicant must hold a valid license in the qualifying state and have held the license continuously for at least one year before making application in Minnesota;

(5) an applicant is not eligible for a license under this subdivision if the applicant has failed the same or greater class of license examination in Minnesota, or if the applicant's license of the same or greater class has been revoked or suspended; and

(6) an applicant who has failed to renew a personal license for two years or more after its expiration is not eligible for a license under this subdivision.

History:

2013 c 85 art 2 s 22; 2015 c 54 art 1 s 8; 2017 c 68 art 1 s 7-10,26; 1Sp2017 c 7 s 8

326B.166 ELEVATOR INSPECTION AND REPORTING.

Subdivision 1.Elevator available for inspection.

A person that owns or controls a building or other structure housing an elevator that is subject to inspection by the department, shall, upon request, provide access at a reasonable hour to the elevator for purposes of inspection.

Subd. 2.Persons required to report.

The following persons shall report the information specified in subdivision 3 to the commissioner by January 1, 2008:

(a) any person that, between August 1, 2005, and July 31, 2007, has provided service, alteration, repair, or maintenance to any elevator located in Minnesota;

(b) any person that, between August 1, 2005, and July 31, 2007, has entered into an agreement to provide service, alteration, repair, or maintenance to any elevator located in Minnesota;

(c) any person that owns or controls an elevator located in Minnesota that, between August 1, 2005, and July 31, 2007, has not received service, alteration, repair, or maintenance on the elevator; or

(d) any person that owns or controls an elevator located in Minnesota that, between August 1, 2005, and July 31, 2007, has not entered into an agreement to receive service, alteration, repair, or maintenance on the elevator.

Subd. 3.Elevator location, type, and installation date.

On a form prescribed by the commissioner, the persons required to report pursuant to subdivision 2 shall provide the following:

(a) the location of each elevator;

(b) the type of each elevator; and

(c) the date the elevator was installed.

Subd. 4.Definition.

As used in this section, "elevator" is as defined in section 326B.163, subdivision 5.

History:

1989 c 303 s 4; 1995 c 166 s 17; 2007 c 140 art 4 s 21,61; art 13 s 4

326B.169 [Repealed, 2015 c 54 art 5 s 16]

326B.172 LICENSING AUTHORITIES.

Any municipality may by ordinance establish a licensing authority with jurisdiction over all passenger and freight elevators within such municipality, fix the initial and renewal fee for, and the period of duration of, licenses to operate such elevators, and setting forth the requirements for applicants for and the terms and conditions of licenses to operate such elevators.

History:

1955 c 561 s 2; 1973 c 123 art 5 s 7; 1995 c 166 s 7,17; 2007 c 140 art 4 s 61; art 13 s 4

326B.175 ELEVATORS, ENTRANCES SEALED.

Except as provided in section 326B.188, it shall be the duty of the department and the licensing authority of any municipality which adopts any such ordinance whenever it finds any such elevator under its jurisdiction in use in violation of any provision of sections 326B.163 to 326B.178 to seal the entrances of such elevator and attach a notice forbidding the use of such elevator until the provisions thereof are complied with.

History:

1955 c 561 s 3; Ex1967 c 1 s 6; 1973 c 123 art 5 s 7; 1995 c 166 s 8,17; 2007 c 140 art 4 s 22, 61; art 13 s 4; 2011 c 26 s 1

326B.178 VIOLATIONS, PENALTIES.

Subdivision 1.Removal of seal.

No person, firm, or corporation may remove any seal or notice forbidding the use of an elevator, except by authority of the department or the licensing authority having jurisdiction over the elevator, or operate an elevator after a notice has been attached forbidding its use, unless the notice has been removed by authority of the department or the licensing authority having jurisdiction over the elevator.

Subd. 2.False certification.

No inspector, or other party authorized by this section or by rule to inspect elevators, may falsely certify the safety of an elevator, or grant a license or permit contrary to any provision of this chapter.

Subd. 3.Minimum requirements.

No person, firm, or corporation may construct, install, alter, remove, or repair an elevator that does not meet the minimum requirements of this chapter, adopted rules, or national codes adopted by rule. Notwithstanding any provision of rule or national code adopted by rule to the contrary, however, a stairway chair lift that is not hardwired to the building's electrical system, but is instead plugged into an electrical outlet, may be installed in a private residence for the use of its occupants.

Subd. 4.Penalties.

The commissioner shall administer sections 326B.163 to 326B.191. In addition to the remedies provided for violations of this chapter, the commissioner may impose a penalty of up to $10,000 for a violation of any provision of sections 326B.163 to 326B.191.

History:

1955 c 561 s 4; Ex1967 c 1 s 6; 1989 c 303 s 7; 1995 c 166 s 9-11,17; 1999 c 185 s 2; 2007 c 140 art 4 s 23,24,61; art 13 s 4

326B.181 [Repealed, 2015 c 54 art 5 s 16]

326B.184 FEES FOR LICENSURE AND PERMIT.

Subdivision 1.Permits.

No person may construct, install, alter, repair, or remove an elevator without first filing an application for a permit with the department or a municipality authorized by subdivision 4 to inspect elevators. A permit issued by the department is valid for work commenced within 12 months of application and completed within two years of application. Where no work is commenced within 12 months of application, an applicant may cancel the permit and request a refund of inspection fees.

Subd. 1a.Department permit and inspection fees.

(a) The department permit and inspection fees to construct, install, alter, repair, or remove an elevator are as follows:

(1) the permit fee is $100;

(2) the inspection fee is 0.015 of the total cost of the permitted work for labor and materials, including related electrical and mechanical equipment. The inspection fee covers two inspections. The inspection fee for additional inspections is $80 per hour;

(3) when inspections scheduled by the permit submitter are not able to be completed because the work is not complete, a fee equal to two hours at the hourly rate of $80 must be paid by the permit submitter; and

(4) when the owner or permit holder requests inspections be performed outside of normal work hours or on weekends or holidays, an hourly rate of $120 in addition to the inspection fee must be paid.

(b) The department fees for inspection of existing elevators when requested by the elevator owner or as a result of an accident resulting in personal injury are at an hourly rate of $80 during normal work hours or $120 outside of normal work hours or on weekends or holidays, with a one-hour minimum.

Subd. 2. Operating permits and fees; periodic inspections.

(a) No person may operate an elevator without first obtaining an annual operating permit from the department or a municipality authorized by subdivision 4 to issue annual operating permits. A $100 annual operating permit fee must be paid to the department for each annual operating permit issued by the department, except that the original annual operating permit must be included in the permit fee for the initial installation of the elevator. Annual operating permits must be issued at 12-month intervals from the date of the initial annual operating permit. For each subsequent year, an owner must be granted an annual operating permit for the elevator upon the owner's or owner's agent's submission of a form prescribed by the commissioner and payment of the $100 fee. Each form must include the location of the elevator, the results of any periodic test required by the code, and any other criteria established by rule. An annual operating permit may be revoked by the commissioner upon an audit of the periodic testing results submitted with the application or a failure to comply with elevator code requirements, inspections, or any other law related to elevators. Except for an initial operating permit fee, elevators in residential dwellings, hand-powered manlifts and electric endless belt manlifts, and vertical reciprocating conveyors are not subject to a subsequent operating permit fee.

(b) All elevators are subject to periodic inspections by the department or a municipality authorized by subdivision 4 to perform periodic inspections, except that hand-powered manlifts and electric endless belt manlifts are exempt from periodic inspections. Periodic inspections by the department shall be performed at the following intervals:

(1) a special purpose personnel elevator is subject to inspection not more than once every five years;

(2) an elevator located within a house of worship that does not have attached school facilities is subject to inspection not more than once every three years; and

(3) all other elevators are subject to inspection not more than once each year.

Subd. 3.Contractor licenses.

The commissioner may establish criteria for the qualifications of elevator contractors and issue licenses based upon proof of the applicant's qualifications.

Subd. 4.Permissive municipal regulation.

A municipality may conduct a system of elevator inspection in conformity with this chapter, State Building Code requirements, and adopted rules that includes the inspection of elevator installation, repair, alteration, and removal, construction, routine and periodic inspection and testing of existing elevators, and the issuance of annual operating permits. The municipality shall employ inspectors meeting the minimum requirements established by Minnesota Rules to perform the inspections and to witness the tests. A municipality may establish and retain its own fees for inspection of elevators and related devices in its jurisdiction. A municipality may establish and retain its own fees for issuance of annual operating permits for elevators in its jurisdiction. A municipality may not adopt standards that do not conform to the uniform standards prescribed by the department.

If the commissioner determines that a municipality is not properly administering and enforcing the law, rules, and codes, the commissioner shall have the inspection, administration, and enforcement undertaken by a qualified inspector employed by the department.

History:

1989 c 303 s 8; 1995 c 166 s 12,13,17; 1997 c 206 s 9; 2007 c 140 art 4 s 25,61; art 13 s 4; 2010 c 282 s 2; 2013 c 85 art 2 s 23-25; 2015 c 54 art 1 s 9

326B.187 RULES.

The commissioner may adopt rules for the following purposes:

(1) to establish minimum qualifications for elevator inspectors that must include possession of a current elevator constructor license issued by the department and proof of successful completion of the national elevator industry education program examination or equivalent experience;

(2) to establish minimum qualifications for limited elevator inspectors;

(3) to establish criteria for the qualifications of elevator contractors;

(4) to establish elevator standards under sections 326B.106, subdivisions 1 and 3, and 326B.13;

(5) to establish procedures for appeals of decisions of the commissioner under chapter 14 and procedures allowing the commissioner, before issuing a decision, to seek advice from the elevator trade, building owners or managers, and others knowledgeable in the installation, construction, and repair of elevators; and

(6) to establish requirements for the registration of all elevators.

History:

1989 c 303 s 9; 1995 c 166 s 14,17; 1996 c 305 art 3 s 1; 1999 c 250 art 3 s 3; 2007 c 140 art 4 s 26,61; art 13 s 4; 2013 c 85 art 2 s 26

326B.188 TIMELINE AND EXEMPTION FOR COMPLIANCE WITH ELEVATOR CODE CHANGES AFFECTING EXISTING ELEVATORS AND RELATED DEVICES.

(a) This section applies to code requirements for existing elevators and related devices under Minnesota Rules, chapter 1307, where the deadline set by law for meeting the code requirements is January 29, 2012, or later.

(b) If the department or municipality conducting elevator inspections within its jurisdiction notified the owner of an existing elevator or related device of the code requirements before August 1, 2011, the owner may submit a compliance plan by December 30, 2011. If the department or municipality did not notify the owner of an existing elevator or related device of the code requirements before August 1, 2011, the department or municipality shall notify the owner of the code requirements and permit the owner to submit a compliance plan by December 30, 2011, or within 60 days after the date of notification, whichever is later.

(c) Any compliance plan submitted under this section shall result in compliance with the code requirements by the later of January 29, 2012, or three years after submission of the compliance plan. Elevators and related devices that are not in compliance with the code requirements by the later of January 29, 2012, or three years after the submission of the compliance plan may be taken out of service as provided in section 326B.175.

(d) When approved by the local building official, an elevator is not required to comply with the code requirements described in paragraph (a) for phase I and II operation if the elevator was installed prior to January 27, 2007, in a residential condominium property having five or fewer floors not including the basement.

History:

2011 c 26 s 2; 2015 c 54 art 1 s 10

326B.191 CONFLICT OF LAWS.

Nothing in sections 326B.163 to 326B.191 supersedes the Minnesota Electrical Act in this chapter.

History:

1995 c 166 s 15,17; 2007 c 140 art 4 s 61; art 13 s 4; 2010 c 280 s 21

INDUSTRIALIZED/MODULAR BUILDINGS

326B.194 INTERSTATE COMPACT ON INDUSTRIALIZED/MODULAR BUILDINGS.

The state of Minnesota ratifies and approves the Interstate Industrialized Buildings Commission's Interstate Compact as amended by Laws 1990, chapter 458, section 2; Laws 1995, chapter 254, article 4, section 1; and Laws 2007, chapter 140, article 4, section 61, and article 13, section 4, on industrialized/modular buildings and incorporates the compact by reference. The commissioner must make a copy of the compact available to the public.

History:

1990 c 458 s 2; 1995 c 254 art 4 s 1; 2007 c 140 art 4 s 61; art 13 s 4; 2015 c 54 art 5 s 14

326B.197 BOND REQUIRED FOR CERTAIN CONTRACTORS.

(a) A person contracting to do gas, heating, ventilation, cooling, air conditioning, fuel burning, or refrigeration work must give and maintain bond to the state in the amount of $25,000 for all work entered into within the state. The bond must be for the benefit of persons suffering financial loss by reason of the contractor's failure to comply with the requirements of the State Mechanical Code. A bond given to the state must be filed with the commissioner of labor and industry and is in lieu of all other bonds to any political subdivision required for work covered by this section. The bond must be written by a corporate surety licensed to do business in the state.

(b) The commissioner of labor and industry may charge each person giving bond under this section a biennial bond filing fee of $100.

History:

1Sp2003 c 1 art 2 s 83; 2007 c 135 art 4 s 9; 2007 c 140 art 4 s 28,61; art 13 s 4; 2010 c 347 art 3 s 19,76; 2010 c 385 s 6

ELECTRICAL

326B.31 DEFINITIONS.

Subdivision 1.Scope.

For purposes of sections 326B.31 to 326B.399, the terms defined in this section have the meanings given them.

Subd. 2.Class A electrical contractor.

"Class A electrical contractor" means a licensed contractor whose responsible licensed individual is a licensed Class A master electrician.

Subd. 3.

MS 2007 Supp [Renumbered subd 10]

Subd. 4.

MS 2007 Supp [Renumbered subd 24]

Subd. 5.

MS 2007 Supp [Renumbered subd 28]

Subd. 6.

MS 2007 Supp [Renumbered subd 30]

Subd. 7.Class A installer.

"Class A installer" means an individual who has the necessary qualifications, training, experience, and technical knowledge to properly lay out and install electrical wiring, apparatus, and equipment for major electrical home appliances and such other electrical equipment as is determined by the commissioner pursuant to section 326B.33, subdivision 3, on the load side of the main service on farmsteads or in any town or municipality with less than 1,500 inhabitants, which is not contiguous to a city of the first class and does not contain an established business of a master electrician, and who is licensed as a Class A installer by the commissioner.

Subd. 8.Class A journeyworker electrician.

"Class A journeyworker electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to perform and supervise any electrical work except for planning or laying out of electrical work, and who is licensed as a Class A journeyworker electrician by the commissioner.

Subd. 9.Class A master electrician.

"Class A master electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to perform and supervise any electrical work, and who is licensed as a Class A master electrician by the commissioner.

Subd. 10.Class B electrical contractor.

"Class B electrical contractor" means a licensed contractor whose responsible licensed individual is a licensed Class B master electrician.

Subd. 11.Class B installer.

"Class B installer" means an individual who has the necessary qualifications, training, experience, and technical knowledge to properly lay out and install electrical wiring, apparatus, and equipment on center pivot irrigation booms on the load side of the main service on farmsteads, and install other electrical equipment determined by the commissioner, and who is licensed as a Class B installer by the commissioner.

Subd. 12.Class B journeyworker electrician.

"Class B journeyworker electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to install, alter, repair, and supervise the installing, altering, or repairing of electrical wiring, apparatus, and equipment for single phase systems of not more than 200 ampere capacity for light, heat, power, and other purposes on any farm or in any single family dwelling located in any town or municipality which has a population of less than 2,500 inhabitants, and who is licensed as a Class B journeyworker electrician by the commissioner.

Subd. 13.Class B master electrician.

"Class B master electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to perform and supervise any electrical work for single phase systems of not over 200 ampere capacity for light, heat, power, and other purposes on any farm or in any single family dwelling located in any town or municipality which has a population of less than 2,500 inhabitants, and who is licensed as a Class B master electrician by the commissioner.

Subd. 14.Contractor.

"Contractor" means a person who performs or offers to perform any electrical work, with or without compensation, who is licensed as a contractor by the commissioner. A contractor's license does not of itself qualify its holder to perform or supervise the electrical work authorized by holding any class of electrician's or other personal license. Contractor includes electrical contractors, satellite system contractors, and technology system contractors.

Subd. 15.Demarcation.

"Demarcation" means listed equipment as identified in Minnesota Rules, part 3801.3619, such as a transformer, uninterruptible power supply (UPS), battery, control panel, or other device that isolates technology circuits or systems from nontechnology circuits or systems, including plug or cord and plug connection.

Subd. 16. Direct supervision.

"Direct supervision" means:

(1) an unlicensed individual is being supervised by an individual licensed to perform the electrical work being supervised;

(2) during the entire working day of the unlicensed individual, the licensed individual is physically present at the location where the unlicensed individual is performing electrical work and immediately available to the unlicensed individual;

(3) the licensed individual is physically present and immediately available to the unlicensed individual at all times for assistance and direction;

(4) electronic supervision does not meet the requirement of physically present and immediately available;

(5) the licensed individual shall review the electrical work performed by the unlicensed individual before the electrical work is operated; and

(6) the licensed individual is able to and does determine that all electrical work performed by the unlicensed individual is performed in compliance with section 326B.35.

The licensed individual is responsible for the compliance with section 326B.35 of all electrical work performed by the unlicensed individual.

Subd. 17.Electrical work.

"Electrical work" means the installing, altering, repairing, planning, or laying out of electrical wiring, apparatus, or equipment for electrical light, heat, power, technology circuits or systems, or other purposes. The installing, altering, repairing, planning, or laying out of electrical wiring, apparatus, or equipment for electrical light, heat, power, technology circuits or systems, or other purposes includes, but is not limited to, the performance of any work regulated by the standards referred to in section 326B.35.

Subd. 18.

[Repealed, 2013 c 85 art 2 s 44]

Subd. 19.

[Repealed, 2013 c 85 art 2 s 44]

Subd. 20.Lineman.

"Lineman" means an individual having the necessary qualifications, training, experience, and technical knowledge to construct and maintain transmission and distribution systems that are or will be owned or leased by an electrical utility, and who is licensed as a lineman by the commissioner.

Subd. 21.Maintenance electrician.

"Maintenance electrician" means an individual having the necessary qualifications, training, experience, and technical knowledge to properly maintain and repair electrical wiring, apparatus, and equipment, who is licensed as a maintenance electrician by the commissioner or who is exempt from licensing by sections 326B.32 to 326B.399.

Subd. 22.

[Repealed, 2013 c 85 art 2 s 44]

Subd. 23.Owner.

An "owner" is an individual who physically performs electrical work on premises the individual owns and actually occupies as a residence or owns and will occupy as a residence upon completion of its construction.

Subd. 24.Personal license.

"Personal license" means any license issued by the commissioner under section 326B.33 or the rules adopted under section 326B.33, except a contractor's license.

Subd. 25.Power limited technician.

"Power limited technician" means an individual having the necessary qualifications, training, experience, and technical knowledge to install, alter, repair, plan, lay out, and supervise the installing, altering, and repairing of electrical wiring, apparatus, and equipment for technology circuits or systems, and who is licensed as a power limited technician by the commissioner.

Subd. 26.Process control circuits or systems.

"Process control circuits or systems" are circuits or systems, regardless of electrical classification, that are integrated with a manufacturing, mining, energy, finishing, conveyance of equipment or product, material handling or packaging process that makes or assembles, or similar process. Process control systems does not include premises network and communication systems whose purpose or function is not dedicated to process control circuits or systems.

Subd. 26a.Request for inspection.

"Request for inspection" means the application for and issuance of a permit for an electrical installation that is required to be inspected under section 326B.36.

Subd. 27.Residential dwelling.

A "residential dwelling" is a single dwelling unit that is contained in a one-family, two-family, or multifamily dwelling as defined in the National Electrical Code pursuant to section 326B.35. A residential dwelling includes a garage and accessory building that can only be used by the residents of the single dwelling unit.

Subd. 28.Responsible licensed individual.

A contractor's "responsible licensed individual" means the licensed Class A master electrician, Class B master electrician, master elevator constructor, or power limited technician designated in writing by the contractor in the contractor's license application, or in another manner acceptable to the commissioner, as the individual responsible for the contractor's compliance with sections 326B.31 to 326B.399, all rules adopted under these sections, and all orders issued under section 326B.082. The terms "licensed responsible individual" and "licensed responsible master electrician or power limited technician" are synonymous.

Subd. 29.Technology circuits or systems.

"Technology circuits or systems" means class 2 or class 3 circuits or systems for, but not limited to, remote control, signaling, control, alarm, and audio signal, including associated components as covered by the National Electrical Code, articles 640, 645, 650, 725, 760, 770, and 780, and which are isolated from circuits or systems other than class 2 or class 3 by a demarcation and are not process control circuits or systems; antenna and communication circuits or systems as covered by chapter 8 of the National Electrical Code; and circuitry and equipment for indoor lighting and outdoor landscape lighting systems that are supplied by the secondary circuit of an isolating power supply operating at 30 volts or less as covered by the National Electrical Code, article 411. The planning, laying out, installing, altering, and repairing of technology circuits or systems must be performed in accordance with the applicable requirements of the National Electrical Code pursuant to section 326B.35.

Subd. 30.Technology system contractor.

"Technology system contractor" means a licensed contractor whose responsible licensed individual is a licensed power limited technician.

Subd. 31.Satellite broadcast communication system.

"Satellite broadcast communication system" means antenna and receiving equipment for a residential dwelling to receive and transmit communication signals from satellite sources as covered by the National Electrical Code. Satellite broadcast communication system is a subset of technology circuits and systems.

Subd. 32.Satellite system installer.

"Satellite system installer" means an individual having the necessary training, knowledge, and experience to plan, lay out, supervise, and install, maintain, and repair wiring, apparatus, and equipment for satellite broadcast communication systems.

Subd. 33.Satellite system contractor.

"Satellite system contractor" means a licensed contractor whose responsible licensed individual is a licensed satellite system installer.

History:

(5872, 5887, 5887-23, 5887-30, 5887-30e) 1907 c 457 s 8; 1913 c 554 s 1; 1933 c 349 s 5; 1937 c 367 s 1,6; 1937 c 370 s 4; 1941 c 460 s 1; 1943 c 474 s 1; 1947 c 253 s 1; 1957 c 907 s 1-3; 1967 c 602 s 10-16; 1979 c 121 s 1; 1985 c 73 s 1-4; 1985 c 248 s 70; 1Sp1985 c 6 s 2; 1986 c 373 s 1,2; 1986 c 402 s 1; 1986 c 444; 1991 c 289 s 1-9; 2002 c 328 s 1-7; 2003 c 58 s 1; 2007 c 135 art 6 s 1; 2007 c 140 art 5 s 1-18,31,32; art 6 s 2,3; art 13 s 4; 2008 c 337 s 5,6; 2010 c 280 s 22; 2012 c 262 s 1-4; 2013 c 85 art 2 s 27; 2016 c 158 art 1 s 172; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

326B.32 BOARD OF ELECTRICITY.

Subdivision 1.Composition.

(a) The Board of Electricity shall consist of 12 members. Eleven members shall be appointed by the governor with the advice and consent of the senate and shall be voting members. Appointments of members by the governor shall be made in accordance with section 15.066. If the senate votes to refuse to consent to an appointment of a member made by the governor, the governor shall appoint a new member with the advice and consent of the senate. One member shall be the commissioner of labor and industry or the commissioner's designee, who shall be a voting member. Of the 11 appointed members, the composition shall be as follows:

(1) one member shall be an electrical inspector;

(2) two members shall be representatives of the electrical suppliers in rural areas;

(3) two members shall be master electricians, who shall be contractors;

(4) two members shall be journeyworker electricians;

(5) one member shall be a registered consulting electrical engineer;

(6) two members shall be power limited technicians, who shall be technology system contractors primarily engaged in the business of installing technology circuits or systems; and

(7) one member shall be a public member as defined by section 214.02.

The electrical inspector shall be appointed to a term to end December 31, 2011. One of the rural electrical suppliers shall be appointed for a term to end December 31, 2011. The other rural electrical supplier shall be appointed for a term to end December 31, 2010. The consulting electrical engineer shall be appointed for a term to end December 31, 2011. One of the master electrician contractors shall be appointed for a term to end December 31, 2011. The other master electrician contractor shall be appointed for a term to end December 31, 2010. One of the journeyworker electricians shall be appointed for a term to end December 31, 2011. The other journeyworker electrician shall be appointed for a term to end December 31, 2010. One of the power limited technicians shall be appointed for a term to end December 31, 2011. The other power limited technician shall be appointed for a term to end December 31, 2010. The public member shall be appointed for a term to end December 31, 2010.

(b) The consulting electrical engineer must possess a current Minnesota professional engineering license and maintain the license for the duration of the term on the board. All other appointed members, except for the public member and the representatives of electrical suppliers in rural areas, must possess a current electrical license issued by the Department of Labor and Industry and maintain that license for the duration of their terms. All appointed members must be residents of Minnesota at the time of and throughout the member's appointment. The term of any appointed member that does not maintain membership qualification status shall end on the date of the status change and the governor shall appoint a new member. It is the responsibility of the member to notify the board of their status change.

(c) For appointed members, except the initial terms designated in paragraph (a), each term shall be three years with the terms ending on December 31. Members appointed by the governor shall be limited to three consecutive terms. The governor shall, all or in part, reappoint the current members or appoint replacement members with the advice and consent of the senate. Midterm vacancies shall be filled for the remaining portion of the term. Vacancies occurring with less than six months time remaining in the term shall be filled for the existing term and the following three-year term. Members may serve until their successors are appointed but in no case later than July 1 in a year in which the term expires unless reappointed.

Subd. 2.Powers; duties; administrative support.

(a) The board shall have the power to:

(1) elect its chair, vice-chair, and secretary;

(2) adopt bylaws that specify the duties of its officers, the meeting dates of the board, and containing other provisions as may be useful and necessary for the efficient conduct of the business of the board;

(3) adopt the Minnesota Electrical Code, which must be the most current edition of the National Electrical Code and any amendments thereto. The board shall adopt the most current edition of the National Electrical Code and any amendments thereto pursuant to chapter 14 and as provided in subdivision 6, paragraphs (b) and (c);

(4) review requests for final interpretations and issue final interpretations as provided in section 326B.127, subdivision 5;

(5) adopt rules that regulate the licensure or registration of electrical businesses, electrical contractors, master electricians, journeyworker electricians, Class A installer, Class B installer, power limited technicians, and other persons who perform electrical work except for those individuals licensed under section 326.02, subdivisions 2 and 3. The board shall adopt these rules pursuant to chapter 14 and as provided in subdivision 6, paragraphs (d) and (e);

(6) adopt rules that regulate continuing education for individuals licensed or registered as electrical businesses, electrical contractors, master electricians, journeyworker electricians, Class A installer, Class B installer, power limited technicians, and other persons who perform electrical work. The board shall adopt these rules pursuant to chapter 14 and as provided in subdivision 6, paragraphs (d) and (e);

(7) advise the commissioner regarding educational requirements for electrical inspectors;

(8) refer complaints or other communications to the commissioner, whether oral or in writing, as provided in subdivision 8, that allege or imply a violation of a statute, rule, or order that the commissioner has the authority to enforce pertaining to code compliance, licensure, registration, or an offering to perform or performance of unlicensed electrical services;

(9) approve per diem and expenses deemed necessary for its members as provided in subdivision 3;

(10) approve license reciprocity agreements;

(11) select from its members individuals to serve on any other state advisory council, board, or committee; and

(12) recommend the fees for licenses and certifications.

Except for the powers granted to the Plumbing Board, Board of Electricity, and the Board of High Pressure Piping Systems, the commissioner of labor and industry shall administer and enforce the provisions of this chapter and any rules promulgated pursuant thereto.

(b) The board shall comply with section 15.0597, subdivisions 2 and 4.

(c) The commissioner shall coordinate the board's rulemaking and recommendations with the recommendations and rulemaking conducted by all of the other boards created pursuant to this chapter. The commissioner shall provide staff support to the board. The support includes professional, legal, technical, and clerical staff necessary to perform rulemaking and other duties assigned to the board. The commissioner of labor and industry shall supply necessary office space and supplies to assist the board in its duties.

Subd. 3.Compensation.

(a) Members of the board may be compensated at the rate of $55 a day spent on board activities, when authorized by the board, plus expenses in the same manner and amount as authorized by the commissioner's plan adopted under section 43A.18, subdivision 2. Members who, as a result of time spent attending board meetings, incur child care expenses that would not otherwise have been incurred, may be reimbursed for those expenses upon board authorization.

(b) Members who are state employees or employees of the political subdivisions of the state must not receive the daily payment for activities that occur during working hours for which they are compensated by the state or political subdivision. However, a state or political subdivision employee may receive the daily payment if the employee uses vacation time or compensatory time accumulated in accordance with a collective bargaining agreement or compensation plan for board activities. Members who are state employees or employees of the political subdivisions of the state may receive the expenses provided for in this subdivision unless the expenses are reimbursed by another source. Members who are state employees or employees of political subdivisions of the state may be reimbursed for child care expenses only for time spent on board activities that are outside their working hours.

(c) The board shall adopt internal standards prescribing what constitutes a day spent on board activities for purposes of making daily payments under this subdivision.

Subd. 4.Removal; vacancies.

(a) An appointed member of the board may be removed by the governor at any time (1) for cause, after notice and hearing, or (2) after missing three consecutive meetings. The chair of the board shall inform the governor of an appointed member missing the three consecutive meetings. After the second consecutive missed meeting and before the next meeting, the secretary of the board shall notify the appointed member in writing that the member may be removed for missing the next meeting. In the case of a vacancy on the board, the governor shall, with the advice and consent of the Senate, appoint a person to fill the vacancy for the remainder of the unexpired term.

(b) Vacancies shall be filled pursuant to section 15.0597, subdivisions 5 and 6.

Subd. 5.Membership vacancies within three months of appointment.

Notwithstanding any law to the contrary, when a membership on the board becomes vacant within three months after being filled through the appointments process, the governor may, upon notification to the Office of Secretary of State, choose a new member from the applications on hand and need not repeat the process.

Subd. 6.Officers, quorum, voting.

(a) The board shall elect annually from its members a chair, vice-chair, and secretary. A quorum of the board shall consist of a majority of members of the board qualified to vote on the matter in question. All questions concerning the manner in which a meeting is conducted or called that is not covered by statute shall be determined by Robert's Rules of Order (revised) unless otherwise specified by the bylaws.

(b) Each electrical code amendment considered by the board that receives an affirmative two-thirds or more majority vote of all of the voting members of the board shall be included in the next electrical code rulemaking proceeding initiated by the board. If an electrical code amendment considered, or reconsidered, by the board receives less than a two-thirds majority vote of all of the voting members of the board, the electrical code amendment shall not be included in the next electrical code rulemaking proceeding initiated by the board.

(c) The board may reconsider electrical code amendments during an active electrical code rulemaking proceeding in which the amendment previously failed to receive a two-thirds majority vote or more of all of the voting members of the board only if new or updated information that affects the electrical code amendment is presented to the board. The board may also reconsider failed electrical code amendments in subsequent electrical code rulemaking proceedings.

(d) Each proposed rule and rule amendment considered by the board pursuant to the rulemaking authority specified in subdivision 2, paragraph (a), clauses (5) and (6), that receives an affirmative majority vote of all of the voting members of the board shall be included in the next rulemaking proceeding initiated by the board. If a proposed rule or rule amendment considered, or reconsidered, by the board receives less than an affirmative majority vote of all of the voting members of the board, the proposed rule or rule amendment shall not be included in the next rulemaking proceeding initiated by the board.

(e) The board may reconsider proposed rules or rule amendments during an active rulemaking proceeding in which the amendment previously failed to receive an affirmative majority vote of all of the voting members of the board only if new or updated information that affects the proposed rule or rule amendment is presented to the board. The board may also reconsider failed proposed rules or rule amendments in subsequent rulemaking proceedings.

Subd. 7.Board meetings.

(a) The board shall hold meetings at such times as the board shall specify. Notice and conduct of all meetings shall be pursuant to chapter 13D and in a manner as the bylaws may provide.

(b) If compliance with section 13D.02 is impractical, the board may conduct a meeting of its members by telephone or other electronic means so long as the following conditions are met:

(1) all members of the board participating in the meeting, wherever their physical location, can hear one another and can hear all discussion and testimony;

(2) members of the public present at the regular meeting location of the board can hear clearly all discussion and testimony and all votes of members of the board and, if needed, receive those services required by sections 15.44 and 15.441;

(3) at least one member of the board is physically present at the regular meeting location; and

(4) all votes are conducted by roll call, so each member's vote on each issue can be identified and recorded.

Each member of the board participating in a meeting by telephone or other electronic means is considered present at the meeting for purposes of determining a quorum and participating in all proceedings.

If telephone or other electronic means is used to conduct a regular, special, or emergency meeting, the board, to the extent practical, shall allow a person to monitor the meeting electronically from a remote location. The board may require the person making such a connection to pay for documented costs that the board incurs as a result of the additional connection.

If telephone or other electronic means is used to conduct a regular, special, or emergency meeting, the board shall provide notice of the regular meeting location, of the fact that some members may participate by telephone or other electronic means, and that a person may monitor the meeting electronically from a remote location. Any person monitoring the meeting electronically from a remote location may be required to pay documented costs incurred by the board as a result of the additional connection. The timing and method of providing notice is governed by section 13D.04.

Subd. 8.Complaints.

(a) The board shall promptly forward to the commissioner the substance of any complaint or communication it receives, whether in writing or oral, that alleges or implies a violation of a statute, rule, or order that the commissioner has the authority to enforce pertaining to the license or registration of any person authorized by the department to provide electrical work, the performance or offering to perform electrical work requiring licensure or registration, or electrical code compliance. Each complaint or communication that is forwarded to the commissioner shall be submitted on a form provided by the commissioner.

(b) The commissioner shall advise the board of the status of the complaint within 90 days after the board's written submission is received, or within 90 days after the board is provided with a written request for additional information or documentation from the commissioner or the commissioner's designee, whichever is later. The commissioner shall advise the board of the disposition of a complaint referred by the board within 180 days after the board's written submission is received. The commissioner shall annually report to the board a summary of the actions taken in response to complaints referred by the board.

Subd. 9.Data Practices Act.

The board is subject to chapter 13, the Minnesota Government Data Practices Act, and shall protect from unlawful disclosure data classified as not public.

Subd. 10.Official records.

The board shall make and preserve all records necessary to a full and accurate knowledge of its official activities in accordance with section 15.17.

History:

2007 c 140 art 4 s 61; art 5 s 19,32; art 13 s 4; 2008 c 337 s 7,8; 2014 c 275 art 1 s 104; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

326B.33 LICENSES.

Subdivision 1.Master electrician.

Except as otherwise provided by law, no individual shall perform or supervise electrical work unless the individual is: (a) licensed by the commissioner as a master electrician; and (b)(i) the electrical work is for a licensed contractor and the individual is an employee, partner, or officer of, or is the licensed contractor, or (ii) the electrical work is performed for the individual's employer on electrical wiring, apparatus, equipment, or facilities that are owned or leased by the employer and that are located within the limits of property operated, maintained, and either owned or leased by the employer.

(1) An applicant for a Class A master electrician license shall (a) be a graduate of a four-year electrical course offered by an accredited college or university; or (b) shall have had at least one year of experience, acceptable to the commissioner, as a licensed journeyworker; or (c) shall have had at least five years' experience, acceptable to the commissioner, in planning for, laying out, supervising and installing wiring, apparatus, or equipment for electrical light, heat and power.

(2) As of August 1, 1985, no new Class B master electrician licenses shall be issued. An individual who has a Class B master electrician license as of August 1, 1985, may retain and renew the license and exercise the privileges it grants, which include electrical work limited to single phase systems, not over 200 amperes in capacity, on farmsteads or single-family dwellings located in towns or municipalities with fewer than 2,500 inhabitants.

Subd. 2.Journeyworker electrician.

(a) Except as otherwise provided by law, no individual shall perform and supervise any electrical work except for planning or laying out of electrical work unless:

(1) the individual is licensed by the commissioner as a journeyworker electrician; and

(2) the electrical work is:

(i) for a contractor and the individual is an employee, partner, or officer of the licensed contractor; or

(ii) performed under the supervision of a master electrician also employed by the individual's employer on electrical wiring, apparatus, equipment, or facilities that are owned or leased by the employer and that are located within the limits of property operated, maintained, and either owned or leased by the employer.

(b) An applicant for a Class A journeyworker electrician license shall have had at least four years of experience, acceptable to the commissioner, in wiring for, installing, and repairing electrical wiring, apparatus, or equipment, provided however, that one year of experience credit for the successful completion of a two-year post high school electrical course approved by the commissioner may be allowed.

(c) As of August 1, 1985, no new Class B journeyworker electrician licenses shall be issued. An individual who holds a Class B journeyworker electrician license as of August 1, 1985, may retain and renew the license and exercise the privileges it grants, which include electrical work limited to single phase systems, not over 200 amperes in capacity, on farmsteads or on single-family dwellings located in towns or municipalities with fewer than 2,500 inhabitants.

Subd. 3.Class A installer.

Notwithstanding the provisions of subdivisions 1, 2, and 14, any individual holding a Class A installer license may lay out and install and supervise the laying out and installing of electrical wiring, apparatus, or equipment for major electrical home appliances on the load side of the main service on farmsteads and in any town or municipality with fewer than 1,500 inhabitants, which is not contiguous to a city of the first class and does not contain an established business of a contractor. As of December 1, 2007, no new Class A installer licenses shall be issued. An individual who holds a Class A installer license as of December 1, 2007, may retain and renew the license and exercise the privileges it grants.

Subd. 4.Class B installer.

Notwithstanding the provisions of subdivisions 1, 2, and 14, any individual holding a Class B installer license may lay out and install electrical wiring, apparatus and equipment on center pivot irrigation booms on the load side of the main service on farmsteads, and install such other electrical equipment as is approved by the commissioner.

Subd. 5.Coursework or experience.

An applicant for a Class A or B installer license shall have completed a post high school course in electricity approved by the commissioner or shall have had at least one year of experience, approved by the commissioner, in electrical wiring.

Subd. 6.Bond.

Every Class A and Class B installer, as a condition of licensure, shall give bond to the state in the penal sum of $1,000. The bond must comply with section 326B.0921.

Subd. 7.Power limited technician.

(a) Except as otherwise provided by law, no individual shall install, alter, repair, plan, lay out, or supervise the installing, altering, repairing, planning, or laying out of electrical wiring, apparatus, or equipment for technology circuits or systems unless:

(1) the individual is licensed by the commissioner as a power limited technician; and

(2) the electrical work is:

(i) for a licensed contractor and the individual is an employee, partner, or officer of, or is the licensed contractor; or

(ii) performed under the direct supervision of a master electrician or power limited technician also employed by the individual's employer on technology circuits, systems, apparatus, equipment, or facilities that are owned or leased by the employer and that are located within the limits of property operated, maintained, and either owned or leased by the employer.

(b) An applicant for a power limited technician's license shall (1) be a graduate of a four-year electrical course offered by an accredited college or university; or (2) have had at least 36 months' experience, acceptable to the commissioner, in planning for, laying out, supervising, installing, altering, and repairing wiring, apparatus, or equipment for power limited systems, provided however, that up to 12 months (2,000 hours) of experience credit for successful completion of a two-year post high school electrical course or other technical training approved by the commissioner may be allowed.

(c) Licensees must attain 16 hours of continuing education acceptable to the board every renewal period.

(d) A company holding an alarm and communication license as of June 30, 2003, may designate one individual who may obtain a power limited technician license without passing an examination administered by the commissioner by submitting an application and license fee of $30.

(e) A person who has submitted an application by December 30, 2007, to take the power limited technician examination administered by the department is not required to meet the qualifications set forth in paragraph (b).

Subd. 7a.Satellite system installer.

(a) Except as otherwise provided by law, no individual shall install, alter, repair, plan, lay out, or supervise the installing, altering, repairing, planning, or laying out of electrical wiring, apparatus, or equipment for satellite broadcast communication systems unless:

(1) the electrical work is for a licensed contractor and the individual is an employee, partner, or officer of, or is the licensed contractor; and

(2) the individual (i) provides certification to the department demonstrating successful completion of the National Standards and Testing Program for satellite system installers sponsored by the Satellite Broadcasting and Communications Association of America, Inc. or other program approved by the board and (ii) has passed an examination administered by the commissioner.

(b) Individuals who fulfill the requirements of this subdivision under paragraph (a), clause (2), are prohibited from performing any other function allowed under the power limited technician license.

(c) Satellite system installers shall be subject to the fees provided for under section 326B.33, subdivision 19, paragraph (b), clause (2).

(d) Satellite system installers must attain four hours of continuing education under rules adopted by the Board of Electricity.

Subd. 8.Elevator constructor.

(a) An individual licensed as an elevator constructor may install, maintain, and repair electrical wiring, apparatus, and equipment for elevators and escalators while in the employ of an elevator contractor or Class A electrical contractor.

(b) An applicant for an elevator constructor's license shall have at least 36 months' experience, acceptable to the commissioner, in wiring for, installing, and repairing electrical wiring, apparatus, or equipment for elevators and escalators, provided, however, that one year of experience credit for the completion of a two-year post-high school electrical course approved by the commissioner may be allowed.

Subd. 9.Lineman.

(a) An individual licensed as a lineman may install, maintain, and repair transmission and distribution systems that are or will be owned or leased by an electric utility.

(b) An applicant for a lineman's license shall have at least 48 months' experience, acceptable to the commissioner, in wiring for, installing, and repairing electrical wiring, apparatus, or equipment for an electrical utility.

Subd. 10.Maintenance electrician.

(a) An individual licensed as a maintenance electrician may maintain and repair electrical wiring, apparatus, and equipment while in the employ of a contractor, or as a full-time employee of a single employer while engaged in the maintenance and repair of electrical wiring, apparatus, and equipment owned or leased by the employer and located within the limits of property owned or leased by the employer.

(b) An applicant for a maintenance electrician's license shall have at least 48 months' experience, acceptable to the commissioner, in wiring for, installing, and repairing electrical wiring, apparatus, or equipment, provided, however, that one year of experience credit for the completion of a two-year post-high school electrical course approved by the commissioner may be allowed.

Subd. 11.Master elevator constructor.

(a) An individual licensed as a master elevator constructor may, while licensed as an elevator electrical contractor or while in the employ of an elevator contractor or Class A electrical contractor, plan, lay out, supervise and install, maintain, and repair wiring, apparatus, and equipment for elevators and escalators.

(b) An applicant for a master elevator constructor's license shall have at least 60 months' experience, acceptable to the commissioner, in wiring for, installing, and repairing electrical wiring, apparatus, or equipment for elevators and escalators, provided, however, that one year of experience credit for the completion of a two-year post-high school electrical course approved by the commissioner may be allowed.

Subd. 12.Unlicensed individuals.

(a) An unlicensed individual means an individual who has not been licensed by the department to perform specific electrical work. An unlicensed individual shall not perform electrical work required to be performed by a licensed individual unless the individual has first registered with the department as an unlicensed individual. Thereafter, an unlicensed individual shall not perform electrical work required to be performed by a licensed individual unless the work is performed under the direct supervision of an individual actually licensed to perform such work. The licensed individual and unlicensed individual must be employed by the same employer. Licensed individuals shall not permit unlicensed individuals to perform electrical work except under the direct supervision of an individual actually licensed to perform such work. Unlicensed individuals shall not supervise the performance of electrical work or make assignments of electrical work to unlicensed individuals. Except for technology circuits or systems work, licensed individuals shall supervise no more than two unlicensed individuals. For technology circuits or systems work, licensed individuals shall supervise no more than three unlicensed individuals.

(b) Notwithstanding any other provision of this section, no individual other than a master electrician or power limited technician shall plan or lay out electrical wiring, apparatus, or equipment for light, heat, power, or other purposes, except circuits or systems exempted from personal licensing by subdivision 21, paragraph (b).

(c) Contractors employing unlicensed individuals to perform electrical work shall maintain records establishing compliance with this subdivision that shall identify all unlicensed individuals performing electrical work, except for individuals working on circuits or systems exempted from personal licensing by subdivision 21, paragraph (b), and shall permit the department to examine and copy all such records.

(d) When a licensed individual supervises the electrical work of an unlicensed individual, the licensed individual is responsible for ensuring that the electrical work complies with the Minnesota Electrical Act and all rules adopted under the act.

Subd. 13.Registration of unlicensed individuals.

Unlicensed individuals performing electrical work for a contractor or employer shall register with the department in the manner prescribed by the commissioner. Experience credit for electrical work performed in Minnesota after January 1, 2009, by an applicant for a license identified in this section shall not be granted where the applicant has not registered with or is not licensed by the department.

Subd. 14.Contractor's license required.

Except as otherwise provided by law, no individual other than an employee, partner, or officer of a licensed contractor, as defined by section 326B.31, subdivision 14, shall perform or offer to perform electrical work with or without compensation unless the individual obtains a contractor's license. A contractor's license does not of itself qualify its holder to perform or supervise the electrical work authorized by holding any class of personal license.

Subd. 15.Bond required.

As a condition of licensing, each contractor shall give and maintain bond to the state in the penal sum of $25,000. The bond must comply with section 326B.0921.

Subd. 16.Insurance required.

Each contractor shall have and maintain in effect general liability insurance, which includes premises and operations insurance and products and completed operations insurance, with limits of at least $100,000 per occurrence, $300,000 aggregate limit for bodily injury, and property damage insurance with limits of at least $50,000 or a policy with a single limit for bodily injury and property damage of $300,000 per occurrence and $300,000 aggregate limits. Such insurance shall be written by an insurer licensed to do business in the state of Minnesota and each contractor shall maintain on file with the commissioner a certificate evidencing such insurance. In the event of a policy cancellation, the insurer shall send written notice to the commissioner at the same time that a cancellation request is received from or a notice is sent to the insured.

Subd. 17.Employment of master electrician, satellite system installer, or power limited technician.

(a) Each contractor must designate a responsible master electrician, satellite system installer, or power limited technician, who shall be responsible for the performance of all electrical work in accordance with the requirements of sections 326B.31 to 326B.399, all rules adopted under these sections, and all orders issued under section 326B.082. The classes of work that a licensed contractor is authorized to perform shall be limited to the classes of work that the responsible master electrician, satellite system installer, or power limited electrician is licensed to perform.

(b) When a contractor's license is held by an individual, sole proprietorship, partnership, limited liability company, or corporation and the individual, proprietor, one of the partners, one of the members, or an officer of the corporation, respectively, is not the responsible master electrician or power limited technician, all requests for inspection shall be signed by the responsible master electrician, satellite system installer, or power limited technician. If the contractor is an individual or a sole proprietorship, the responsible licensed individual must be the individual, proprietor, or managing employee. If the contractor is a partnership, the responsible licensed individual must be a general partner or managing employee. If the licensed contractor is a limited liability company, the responsible licensed individual must be a chief manager or managing employee. If the contractor is a corporation, the responsible licensed individual must be an officer or managing employee. If the responsible licensed individual is a managing employee, the responsible licensed individual must be actively engaged in performing electrical work on behalf of the contractor, and cannot be employed in any capacity as an electrician, installer, or technician by any other contractor or employer designated in subdivision 21. An individual may be the responsible licensed individual for only one contractor or employer.

(c) All applications and renewals for contractor licenses shall include a verified statement that the applicant or licensee has complied with this subdivision.

Subd. 18.Examination.

In addition to the other requirements described in this section and sections 326B.091 to 326B.098, and except as provided in subdivision 20, as a precondition to issuance of a personal license, each applicant must pass a written or oral examination developed and administered by the commissioner to ensure the competence of each applicant for license. An oral examination shall be administered only to an applicant who furnishes a written statement from a certified teacher or other professional, trained in the area of reading disabilities stating that the applicant has a specific reading disability which would prevent the applicant from performing satisfactorily on a written test. The oral examination shall be structured so that an applicant who passes the examination will not impair the applicant's own safety or that of others while acting as a licensed individual.

Subd. 19.License, registration, and renewal fees; expiration.

(a) Unless revoked or suspended under this chapter, all licenses issued or renewed under this section expire on the date specified in this subdivision. Master licenses expire March 1 of each odd-numbered year after issuance or renewal. Electrical contractor licenses expire March 1 of each even-numbered year after issuance or renewal. Technology system contractor and satellite system contractor licenses expire August 1 of each even-numbered year after issuance or renewal. All other personal licenses expire two years from the date of original issuance and every two years thereafter. Registrations of unlicensed individuals expire one year from the date of original issuance and every year thereafter.

(b) For purposes of calculating license fees and renewal license fees required under section 326B.092:

(1) the registration of an unlicensed individual under subdivision 12 shall be considered an entry level license;

(2) the following licenses shall be considered journeyworker licenses: Class A journeyworker electrician, Class B journeyworker electrician, Class A installer, Class B installer, lineman, maintenance electrician, satellite system installer, and power limited technician;

(3) the following licenses shall be considered master licenses: Class A master electrician and Class B master electrician; and

(4) the following licenses shall be considered business licenses: Class A electrical contractor, Class B electrical contractor, satellite system contractor, and technology systems contractor.

(c) For each filing of a certificate of responsible person by an employer, the fee is $100.

Subd. 20.Reciprocity.

The commissioner may enter into reciprocity agreements for personal licenses with another state if approved by the board. Once approved by the board, the commissioner may issue a personal license without requiring the applicant to pass an examination provided the applicant:

(a) submits an application under this section;

(b) pays the application and examination fee and license fee required under section 326B.092; and

(c) holds a valid comparable license in the state participating in the agreement.

Agreements are subject to the following:

(1) The parties to the agreement must administer a statewide licensing program that includes examination and qualifying experience or training comparable to Minnesota's.

(2) The experience and training requirements under which an individual applicant qualified for examination in the qualifying state must be deemed equal to or greater than required for an applicant making application in Minnesota at the time the applicant acquired the license in the qualifying state.

(3) The applicant must have acquired the license in the qualifying state through an examination deemed equivalent to the same class of license examination in Minnesota. A lesser class of license may be granted where the applicant has acquired a greater class of license in the qualifying state and the applicant otherwise meets the conditions of this subdivision.

(4) At the time of application, the applicant must hold a valid license in the qualifying state and have held the license continuously for at least one year before making application in Minnesota.

(5) An applicant is not eligible for a license under this subdivision if the applicant has failed the same or greater class of license examination in Minnesota, or if the applicant's license of the same or greater class has been revoked or suspended.

(6) An applicant who has failed to renew a personal license for two years or more after its expiration is not eligible for a license under this subdivision.

Subd. 21.Exemptions from licensing.

(a) An individual who is a maintenance electrician is not required to hold or obtain a license under sections 326B.31 to 326B.399 if:

(1) the individual is engaged in the maintenance and repair of electrical equipment, apparatus, and facilities that are owned or leased by the individual's employer and that are located within the limits of property operated, maintained, and either owned or leased by the individual's employer;

(2) the individual is supervised by:

(i) the responsible master electrician for a contractor who has contracted with the individual's employer to provide services for which a contractor's license is required; or

(ii) a licensed master electrician, a licensed maintenance electrician, an electrical engineer, or, if the maintenance and repair work is limited to technology circuits or systems work, a licensed power limited technician; and

(3) the individual's employer has on file with the commissioner a current certificate of responsible person, signed by the responsible master electrician of the contractor, the licensed master electrician, the licensed maintenance electrician, the electrical engineer, or the licensed power limited technician, and stating that the person signing the certificate is responsible for ensuring that the maintenance and repair work performed by the employer's employees complies with the Minnesota Electrical Act and the rules adopted under that act. The employer must pay a filing fee to file a certificate of responsible person with the commissioner. The certificate shall expire two years from the date of filing. In order to maintain a current certificate of responsible person, the employer must resubmit a certificate of responsible person, with a filing fee, no later than two years from the date of the previous submittal.

(b) Employees of a licensed electrical or technology systems contractor or other employer where provided with supervision by a master electrician in accordance with subdivision 1, or power limited technician in accordance with subdivision 7, paragraph (a), clause (1), are not required to hold a license under sections 326B.31 to 326B.399 for the planning, laying out, installing, altering, and repairing of technology circuits or systems except planning, laying out, or installing:

(1) in other than residential dwellings, class 2 or class 3 remote control circuits that control circuits or systems other than class 2 or class 3, except circuits that interconnect these systems through communication, alarm, and security systems are exempted from this paragraph;

(2) class 2 or class 3 circuits in electrical cabinets, enclosures, or devices containing physically unprotected circuits other than class 2 or class 3; or

(3) technology circuits or systems in hazardous classified locations as covered by chapter 5 of the National Electrical Code.

(c) Companies and their employees that plan, lay out, install, alter, or repair class 2 and class 3 remote control wiring associated with plug or cord and plug connected appliances other than security or fire alarm systems installed in a residential dwelling are not required to hold a license under sections 326B.31 to 326B.399.

(d) Heating, ventilating, air conditioning, and refrigeration contractors and their employees are not required to hold or obtain a license under sections 326B.31 to 326B.399 when performing heating, ventilating, air conditioning, or refrigeration work as described in section 326B.38.

(e) Employees of any electrical, communications, or railway utility, cable communications company as defined in section 238.02, or a telephone company as defined under section 237.01 or its employees, or of any independent contractor performing work on behalf of any such utility, cable communications company, or telephone company, shall not be required to hold a license under sections 326B.31 to 326B.399:

(1) while performing work on installations, materials, or equipment which are owned or leased, and operated and maintained by such utility, cable communications company, or telephone company in the exercise of its utility, antenna, or telephone function, and which:

(i) are used exclusively for the generation, transformation, distribution, transmission, or metering of electric current, or the operation of railway signals, or the transmission of intelligence and do not have as a principal function the consumption or use of electric current or provided service by or for the benefit of any person other than such utility, cable communications company, or telephone company; and

(ii) are generally accessible only to employees of such utility, cable communications company, or telephone company or persons acting under its control or direction; and

(iii) are not on the load side of the service point or point of entrance for communication systems;

(2) while performing work on installations, materials, or equipment which are a part of the street lighting operations of such utility; or

(3) while installing or performing work on outdoor area lights which are directly connected to a utility's distribution system and located upon the utility's distribution poles, and which are generally accessible only to employees of such utility or persons acting under its control or direction.

(f) An owner shall not be required to hold or obtain a license under sections 326B.31 to 326B.399.

(g) Companies and their employees licensed under section 326B.164 shall not be required to hold or obtain a license under sections 326B.31 to 326B.399 while performing elevator work.

History:

1967 c 602 s 2; 1976 c 222 s 168,169; 1979 c 121 s 2; 1981 c 63 s 1; 1981 c 195 s 1; 1985 c 73 s 5-9; 1985 c 248 s 70; 1Sp1985 c 6 s 4,5; 1986 c 373 s 3-6; 1986 c 444; 1991 c 289 s 11-29; 2002 c 328 s 9-21; 2003 c 58 s 2-4; 2005 c 62 s 1; 2007 c 135 art 6 s 3-7; 2007 c 140 art 5 s 20,32; art 13 s 4; 2008 c 337 s 9-16,65; 2009 c 78 art 5 s 12,13; 2010 c 280 s 23; 2010 c 347 art 3 s 20-23,76; 2010 c 384 s 86; 2010 c 385 s 6; 2012 c 262 s 5-7; 2013 c 85 art 2 s 28,29; 2015 c 54 art 1 s 11,12; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

326B.34 ALARM AND COMMUNICATION SYSTEMS.

Subdivision 1.Exemption.

No licensed power limited technician, technology system contractor, or individual employed by a technology system contractor may be required to obtain any authorization, permit, franchise, or license from, or pay any fee, franchise tax, or other assessment to, any agency, department, board, or political subdivision of the state as a condition for performing any work within the scope of the license.

Subd. 2.Limitation.

Nothing in this section prohibits a unit of local government from charging a franchise fee to the operator of a cable communications company as defined in section 238.02.

History:

1Sp1985 c 6 s 1; 1986 c 373 s 7; 1987 c 279 s 2; 1995 c 233 art 2 s 52; 1997 c 7 art 1 s 125; 2002 c 328 s 22,23; 2003 c 58 s 5; 2007 c 140 art 5 s 32; art 13 s 4

326B.35 SAFETY STANDARDS.

All electrical wiring, apparatus and equipment for electrical light, heat and power, technology circuits or systems shall comply with the rules of the department and the board and be installed in conformity with accepted standards of construction for safety to life and property. For the purposes of this chapter, the rules and safety standards stated at the time the work is done in the then most current edition of the National Electrical Code as adopted by the National Fire Protection Association, Inc. and approved by the American National Standards Institute, and the National Electrical Safety Code as published by the Institute of Electrical and Electronics Engineers, Inc. and approved by the American National Standards Institute, shall be prima facie evidence of accepted standards of construction for safety to life and property; provided further, that in the event a Minnesota Building Code is formulated pursuant to section 326B.106, containing approved methods of electrical construction for safety to life and property, compliance with said methods of electrical construction of said Minnesota Building Code shall also constitute compliance with this section, and provided further, that nothing herein contained shall prohibit any political subdivision from making and enforcing more stringent requirements than set forth herein and such requirements shall be complied with by all licensed electricians working within the jurisdiction of such political subdivisions.

History:

1967 c 602 s 3; Ex1967 c 1 s 6; 1971 c 25 s 67; 1983 c 289 s 114 subd 1; 1984 c 544 s 89; 1984 c 655 art 1 s 92; 1985 c 73 s 10; 1985 c 248 s 70; 1Sp1985 c 6 s 6; 1Sp2001 c 4 art 6 s 74; 2002 c 328 s 24; 2007 c 140 art 4 s 61; art 5 s 21,32; art 13 s 4

326B.36 INSPECTION.

Subdivision 1.Required inspection.

Except where any political subdivision has by ordinance provided for electrical inspection similar to that herein provided, every new electrical installation in any construction, remodeling, replacement, or repair, except minor repair work as the same is defined by rule, shall be inspected by the commissioner for compliance with accepted standards of construction for safety to life and property.

Subd. 2.Technology systems.

(a) The installation of the technology circuits or systems described in paragraph (b), except:

(1) minor work performed by a contractor;

(2) work performed by a heating, ventilating, or air conditioning contractor as described in section 326B.38; and

(3) work performed by cable company employees when installing cable communications systems or telephone company employees when installing telephone systems,

must be inspected as provided in this section for compliance with the applicable provisions of the National Electrical Code and the applicable provisions of the National Electrical Safety Code, as those codes were approved by the American National Standards Institute.

(b) The inspection requirements in paragraph (a) apply to:

(1) class 2 or class 3 remote control circuits that control circuits or systems other than class 2 or class 3, except circuits that interconnect these systems exempted by section 326B.33, subdivision 21, paragraph (b), other than fire alarm; class 2 or class 3 circuits in electrical cabinets, enclosures, or devices containing physically unprotected circuits other than class 2 or class 3; or technology circuits and systems in hazardous classified locations as covered by chapter 5 of the National Electrical Code;

(2) fire alarm systems, other than in one- or two-family dwellings, as defined in articles 100 and 760 of the National Electrical Code;

(3) technology circuits and systems contained within critical care areas of health care facilities as defined by the safety standards identified in section 326B.35, including, but not limited to, anesthesia and resuscitative alarm and alerting systems, medical monitoring, and nurse call systems;

(4) physical security systems within detention facilities; and

(5) circuitry and equipment for indoor lighting systems as defined in article 411 of the National Electrical Code.

(c) For the purposes of this subdivision "minor work" means the adjustment or repair and replacement of worn or defective parts of a technology circuit or system. Minor work may be inspected under this section at the request of the owner of the property or the person doing the work.

(d) Notwithstanding this subdivision, if an electrical inspector observes that a contractor, employer, or owner has not complied with accepted standards when the work was performed, as provided in the most recent editions of the National Electrical Code and the National Electrical Safety Code as approved by the American National Standards Institute, the inspector may order the contractor, employer, or owner who has performed the work to file a request for electrical inspection, pay an inspection fee, and make any necessary repairs to comply with applicable standards and require that the work be inspected.

Subd. 3.Licenses; bond.

All inspectors shall hold licenses as master or journeyworker electricians under this chapter. All inspectors under contract with the department to provide electrical inspection services shall give bond in the amount of $1,000, conditioned upon the faithful performance of their duties.

Subd. 4.Procedure.

(a) At or before commencement of any installation required to be inspected by the commissioner, the contractor, installer, special electrician, or owner making the installation shall submit to the commissioner a request for inspection, in a form prescribed by the commissioner, together with the fees required for the installation.

(b) The fees required are a handling fee and an inspection fee. The handling fee shall be set by the commissioner in an amount sufficient to pay the cost of printing and handling the form requesting an inspection. The inspection fee shall be set by the commissioner in an amount sufficient to pay the actual costs of the inspection and the commissioner's costs in administering the inspection. All fees shall be set pursuant to the procedure of sections 14.001 to 14.69.

(c) If the inspector finds that the installation is not in compliance with accepted standards of construction for safety to life and property as required by section 326B.35, the inspector shall by written order condemn the installation or noncomplying portion thereof, or order service to the installation disconnected, and shall send a copy of the order to the commissioner. If the installation or the noncomplying part will seriously and proximately endanger human life and property, the order of the inspector, when approved by the inspector's superior, shall require immediate condemnation or disconnection. In all other cases, the order of the inspector shall permit a reasonable opportunity for the installation to be brought into compliance with accepted standards of construction for safety to life and property prior to the effective time established for condemnation or disconnection.

(d) Copies of each condemnation or disconnection order shall be served personally or by mail upon the property owner, and the contractor, installer, or special electrician making the installation, and other persons as the commissioner by rule may direct. An aggrieved party may appeal any condemnation or disconnection order by filing with the commissioner a notice of appeal within ten days after (1) service upon the aggrieved party of the condemnation or disconnection order, if this service is required, or (2) filing of the order with the commissioner, whichever is later. The appeal shall proceed and the order of the inspector shall have the effect the order, by its terms, and the rules of the commissioner provides. The commissioner shall adopt rules providing procedures for the conduct of appeals, including provisions for the stay of enforcement of the order of the inspector pending such appeal when justified by the circumstances.

Subd. 5.Duty of electrical utility.

No electrical installation subject to inspection by the commissioner shall be newly connected or reconnected for use until there is filed with the electrical utility supplying power a certificate of the property owner or licensed electrician, directing the work that inspection has been requested and that the conditions of the installation are safe for energization, provided further, that in all cases where an order of condemnation or disconnection has been issued against the installation or any part thereof, prior to connection or reconnection there shall also first be filed with the electrical utility supplying the power a copy of an order of the inspector or the commissioner dismissing such prior order of condemnation or disconnection or approving the installation as being in compliance with accepted standards of construction for safety to life and property. With respect to transient projects, the aforesaid certificate shall also contain a certification that the request for inspection has been or will be filed with the commissioner so as to be received by it at least five days prior to the date and time energization of the installation by the utility is to occur, and that the request for inspection states such date and time, and it shall be the responsibility of the commissioner to have inspection of such transient project occur prior to the date and time at which the request states energization is to occur.

Subd. 6.Powers of political subdivisions.

Any political subdivision or the University of Minnesota may make provision for inspection of electrical installations within its jurisdiction, in which case it shall keep on file with the commissioner copies of its current inspection ordinances and codes. No political subdivision or the University of Minnesota shall require any individual, partnership, corporation or other business association holding a license from the commissioner under sections 326B.31 to 326B.399 to pay any license or registration fee, provided however, that any such political subdivision or the University of Minnesota may provide by ordinance a requirement that each individual, partnership, corporation or other business association doing electrical work within the jurisdiction of such political subdivision or the University of Minnesota have on file with said political subdivision a copy of the current license issued by the commissioner or such other evidence of such license as may be provided by the commissioner.

Each electrical inspector of any political subdivision or the University of Minnesota shall be a licensed master or journeyworker electrician under section 326B.33, subdivision 1, paragraph (1), or 2, paragraph (b), and shall not otherwise engage or be employed in the sale, installing, altering, or repairing of electrical wiring, apparatus, or equipment for light, heat, power, and other purposes and shall have no financial interest in any concern engaged in any such business.

Subd. 7.Exemptions from inspections.

Installations, materials, or equipment shall not be subject to inspection under sections 326B.31 to 326B.399:

(1) when owned or leased, operated and maintained by any employer whose maintenance electricians are exempt from licensing under sections 326B.31 to 326B.399, while performing electrical maintenance work only as defined by rule;

(2) when owned or leased, and operated and maintained by any electrical, communications, or railway utility, cable communications company as defined in section 238.02, or telephone company as defined under section 237.01, in the exercise of its utility, antenna, or telephone function; and

(i) are used exclusively for the generations, transformation, distribution, transmission, or metering of electric current, or the operation of railway signals, or the transmission of intelligence, and do not have as a principal function the consumption or use of electric current by or for the benefit of any person other than such utility, cable communications company, or telephone company; and

(ii) are generally accessible only to employees of such utility, cable communications company, or telephone company or persons acting under its control or direction; and

(iii) are not on the load side of the service point or point of entrance for communication systems;

(3) when used in the street lighting operations of an electrical utility;

(4) when used as outdoor area lights which are owned and operated by an electrical utility and which are connected directly to its distribution system and located upon the utility's distribution poles, and which are generally accessible only to employees of such utility or persons acting under its control or direction;

(5) when the installation, material, and equipment are in facilities subject to the jurisdiction of the federal Mine Safety and Health Act; or

(6) when the installation, material, and equipment is part of an elevator installation for which the elevator contractor, licensed under section 326B.164, is required to obtain a permit from the authority having jurisdiction as provided by section 326B.184, and the inspection has been or will be performed by an elevator inspector certified and licensed by the department. This exemption shall apply only to installations, material, and equipment permitted or required to be connected on the load side of the disconnecting means required for elevator equipment under National Electrical Code Article 620, and elevator communications and alarm systems within the machine room, car, hoistway, or elevator lobby.

History:

1967 c 602 s 4; 1981 c 357 s 81; 1982 c 424 s 130; 1985 c 73 s 11-13; 1985 c 248 s 70; 1Sp1985 c 6 s 7-9; 1986 c 373 s 8,9; 1987 c 358 s 117; 1987 c 384 art 2 s 1; 1990 c 422 s 10; 1991 c 289 s 30-32; 1995 c 166 s 16,17; 2002 c 328 s 25-28; 2003 c 58 s 6,7; 2007 c 140 art 4 s 61; art 5 s 22-27,32; art 13 s 4; 2008 c 337 s 17,18; 2013 c 85 art 2 s 30; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

326B.37 INSPECTION FEE SCHEDULE.

Subdivision 1.Schedule.

State electrical inspection fees shall be calculated in accordance with subdivisions 2 to 14.

Subd. 2.Fee for each separate inspection.

The minimum fee for each separate inspection of an installation, replacement, alteration, or repair is $35. Except as otherwise provided in this section, the maximum number of separate inspections allowed without payment of an additional fee is the whole number resulting from dividing by 35 the total fee calculated in accordance with this section. Where additional separate inspections are necessary, additional fees are required to result in a value equal to the total number of separate inspections multiplied by 35. The fee for any inspections needed after a "final inspection" is performed shall be calculated without consideration of any fee paid before the final inspection.

Subd. 3.Fee for service, generator, other power source, or feeder to separate structure.

The inspection fee for the installation, addition, alteration, or repair of each service, change of service, temporary service, generator, other power supply source, or feeder to a separate structure is:

(1) 0 ampere to and including 400 ampere capacity, $35;

(2) 401 ampere to and including 800 ampere capacity, $60; and

(3) ampere capacity above 800, $100.

Where multiple disconnects are grouped at a single location and are supplied by a single set of supply conductors the cumulative rating of the overcurrent devices shall be used to determine the supply ampere capacity.

Subd. 4.Fee for circuit, feeder, feeder tap, or set of transformer secondary conductors.

The inspection fee for the installation, addition, alteration, or repair of each circuit, feeder, feeder tap, or set of transformer secondary conductors, including the equipment served, is:

(1) 0 ampere to and including 200 ampere capacity, $6; and

(2) ampere capacity above 200, $15.

Where existing feeders and circuits are reconnected to overcurrent devices installed as part of the replacement of an existing disconnect, switchboard, motor control center, or panelboard, the inspection fee for each circuit or feeder is $2.

Subd. 5.Inspection fee for dwelling.

(a) The inspection fee for a one-family dwelling and each dwelling unit of a two-family dwelling is the following:

(1) the fee for each service or other source of power as provided in subdivision 3;

(2) $100 for up to 30 feeders and circuits; and

(3) for each additional feeder or circuit, the fee as provided in subdivision 4.

This fee applies to each separate installation for new dwellings and where 15 or more feeders or circuits are installed or extended in connection with any addition, alteration, or repair to existing dwellings. Where existing feeders and circuits are reconnected to overcurrent devices installed as part of the replacement of an existing panelboard, the fee for each reconnected feeder or circuit is $2. The maximum number of separate inspections shall be determined in accordance with subdivision 2. The fee for additional inspections or other installations is that specified in subdivisions 2, 4, 6, and 8. The installer may submit fees for additional inspections when filing the request for electrical inspection. The fee for each detached accessory structure directly associated with a dwelling unit shall be calculated in accordance with subdivisions 3 and 4. When included on the same request for electrical inspection form, inspection fees for detached accessory structures directly associated with the dwelling unit may be combined with the dwelling unit fees to determine the maximum number of separate inspections in accordance with subdivision 2.

(b) The inspection fee for each dwelling unit of a multifamily dwelling with three or more dwelling units is $70 for a combination of up to 20 feeders and circuits and $6 for each additional feeder or circuit. This fee applies to each separate installation for each new dwelling unit and where ten or more feeders or circuits are installed or extended in connection with any addition, alteration, or repair to existing dwelling units. Where existing feeders or circuits are reconnected to overcurrent devices installed as part of the replacement of an existing panelboard, the fee for each reconnected feeder or circuit is $2. The maximum number of separate inspections for each dwelling unit shall be determined in accordance with subdivision 2. The fee for additional inspections or for inspection of other installations is that specified in subdivisions 2, 4, 6, and 8. These fees include only inspection of the wiring within individual dwelling units and the final feeder to that unit where the multifamily dwelling is provided with common service equipment and each dwelling unit is supplied by a separate feeder or feeders extended from common service or distribution equipment. The fee for multifamily dwelling services or other power source supplies and all other circuits is that specified in subdivisions 2 to 4.

(c) A separate request for electrical inspection form must be filed for each dwelling unit that is supplied with an individual set of service entrance conductors. These fees are the one-family dwelling rate specified in paragraph (a).

Subd. 6.Additions to fees of subdivisions 3 to 5.

(a) The fee for the electrical supply for each manufactured home park lot is $35. This fee includes the service or feeder conductors up to and including the service equipment or disconnecting means. The fee for feeders and circuits that extend from the service or disconnecting means is that specified in subdivision 4.

(b) The fee for each recreational vehicle site electrical supply equipment is $6 for each circuit originating within the equipment. The fee for recreational vehicle park services, feeders, and circuits is that specified in subdivisions 3 and 4.

(c) The fee for each street, parking lot, or outdoor area lighting standard and each traffic signal standard is $5. Circuits originating within the standard or traffic signal controller shall not be used when calculating the fee for each standard.

(d) The fee for transformers for light, heat, and power is $15 for transformers rated up to ten kilovolt-amperes and $30 for transformers rated in excess of ten kilovolt-amperes. The previous sentence does not apply to Class 1 transformers or power supplies for Class 1 power-limited circuits or to Class 2 or Class 3 transformers or power supplies.

(e) The fee for transformers and electronic power supplies for electric signs and outline lighting is $5 per unit.

(f) The fee for technology circuits or systems, and circuits of less than 50 volts, is 75 cents for each system device or apparatus.

(g) The fee for each separate inspection of the bonding for a swimming pool, spa, fountain, an equipotential plane for an agricultural confinement area, or similar installation is $35. Bonding conductors and connections require an inspection before being concealed.

(h) The fee for all wiring installed on center pivot irrigation booms is $35 plus $5 for each electrical drive unit.

(i) The fee for retrofit modifications to existing lighting fixtures is 25 cents per luminaire.

(j) When a separate inspection of a concrete-encased grounding electrode is performed, the fee is $35.

(k) The fees required by subdivisions 3 and 4 are doubled for installations over 600 volts.

Subd. 7.Investigation fee: work without electrical inspection request.

(a) Whenever any work for which a request for electrical inspection is required has begun without the request for electrical inspection form being filed with the commissioner, a special investigation shall be made before a request for electrical inspection form is accepted.

(b) An investigation fee, in addition to the full fee required by subdivisions 1 to 6, shall be paid before an inspection is made. The investigation fee is two times the minimum fee specified in subdivision 2 or the inspection fee required by subdivisions 1 to 6, whichever is greater, not to exceed $1,000. The payment of the investigation fee does not exempt any person from compliance with all other provisions of the department rules or statutes nor from any penalty prescribed by law.

Subd. 8.Reinspection fee.

Notwithstanding the provisions of subdivisions 2 and 5, when reinspection is necessary to determine whether unsafe conditions identified during a final inspection have been corrected and the conditions are not the subject of an appeal pending before the commissioner or any court, a reinspection fee of $35 shall be assessed in writing by the inspector.

Subd. 9.Supplemental fee.

When inspections scheduled by the installer are preempted, obstructed, prevented, or otherwise not able to be completed as scheduled due to circumstances beyond the control of the inspector, a supplemental inspection fee of $35 shall be assessed in writing by the inspector.

Subd. 10.Special inspection.

For inspections not covered in this section, or for requested special inspections or services, the fee is $80 per hour, including travel time, plus the standard mileage rate per mile traveled, plus the reasonable cost of equipment or material consumed. This provision is applicable to inspection of empty conduits and other jobs as may be determined by the commissioner. This fee may also be assessed when installations are not accessible by roadway and require alternate forms of transportation or are located in the Northwest Angle, or when inspections are performed outside of Minnesota. For purposes of this subdivision, the standard mileage rate is the standard mileage rate effective at the time of travel, as established by the Internal Revenue Service for computing the deductible costs of operating an automobile for business expense purposes.

Subd. 11.Inspection of transitory project.

(a) For inspection of transitory projects including, but not limited to, festivals, fairs, carnivals, circuses, shows, production sites, and portable road construction plants, the inspection procedures and fees are as specified in paragraphs (b) to (i).

(b) The fee for inspection of each generator or other source of supply is that specified in subdivision 3. A like fee is required at each engagement or setup.

(c) In addition to the fee for generators or other sources of supply, there must be an inspection of all installed feeders, circuits, and equipment at each engagement or setup at the hourly rate specified in subdivision 10, with a one-hour minimum.

(d) An owner, operator, or appointed representative of a transitory enterprise including, but not limited to, festivals, fairs, carnivals, circuses, production companies, shows, portable road construction plants, and similar enterprises shall notify the commissioner of its itinerary or schedule and make application for initial inspection a minimum of 14 days before its first engagement or setup. An owner, operator, or appointed representative of a transitory enterprise who fails to notify the commissioner 14 days before its first engagement or setup may be subject to the investigation fees specified in subdivision 7. The owner, operator, or appointed representative shall request inspection and pay the inspection fee for each subsequent engagement or setup at the time of the initial inspection. For subsequent engagements or setups not listed on the itinerary or schedule submitted to the commissioner and where the commissioner is not notified at least 48 hours in advance, a charge of $100 may be made in addition to all required fees.

(e) Amusement rides, devices, concessions, attractions, or other units must be inspected at their first appearance of the year. The inspection fee is $35 per unit with a supply of up to 60 amperes and $40 per unit with a supply above 60 amperes.

(f) An additional fee at the hourly rate specified in subdivision 10 must be charged for additional time spent by each inspector if equipment is not ready or available for inspection at the time and date specified on the application for initial inspection or the request for electrical inspection form.

(g) In addition to the fees specified in paragraphs (b) and (c), a fee of one hour at the hourly rate specified in subdivision 10 must be charged for inspections required to be performed on Saturdays, Sundays, holidays, or after regular business hours.

(h) The fee for reinspection of corrections or supplemental inspections where an additional trip is necessary may be assessed as specified in subdivision 8.

(i) The commissioner shall retain the inspection fee when an owner, operator, or appointed representative of a transitory enterprise fails to notify the commissioner at least 48 hours in advance of a scheduled inspection that is canceled.

Subd. 12.Negotiated fee.

When the fee calculated in accordance with subdivisions 2 to 11 results in a total fee that unreasonably exceeds the cost of inspection, the commissioner may negotiate a fee that more reasonably offsets the cost of inspection.

Subd. 13.

[Repealed, 2010 c 280 s 40; 2010 c 347 art 3 s 75]

Subd. 14.National Electrical Code used for interpretation of provisions.

For purposes of interpretation of this section and Minnesota Rules, chapter 3800, the most recently adopted edition of the National Electrical Code shall be prima facie evidence of the definitions, interpretations, and scope of words and terms used.

Subd. 15.

[Repealed, 2017 c 68 art 1 s 27]

Subd. 16.Wind electric systems.

(a) The inspection fee for the installation of a wind turbine is:

(1) zero watts to and including 100,000 watts, $80;

(2) 100,001 watts to and including 500,000 watts, $105;

(3) 500,001 watts to and including 1,000,000 watts, $120;

(4) 1,000,001 watts to and including 1,500,000 watts, $125;

(5) 1,500,001 watts to and including 2,000,000 watts, $130;

(6) 2,000,001 watts to and including 3,000,000 watts, $145; and

(7) 3,000,001 watts and larger, $160.

(b) For the purpose of paragraph (a), the watt rating is the total estimated alternating current energy output of one individual wind turbine.

Subd. 17.Solar photovoltaic systems.

(a) The inspection fee for the installation of a solar photovoltaic system is:

(1) zero watts to and including 5,000 watts, $60;

(2) 5,001 watts to and including 10,000 watts, $100;

(3) 10,001 watts to and including 20,000 watts, $150;

(4) 20,001 watts to and including 30,000 watts, $200;

(5) 30,001 watts to and including 40,000 watts, $250;

(6) 40,001 watts to and including 1,000,000 watts, $250, and $25 for each additional 10,000 watts over 40,000 watts;

(7) 1,000,001 watts to 5,000,000 watts, $2,650, and $15 for each additional 10,000 watts over 1,000,000 watts; and

(8) 5,000,001 watts and larger, $8,650, and $10 for each additional 10,000 watts over 5,000,000 watts.

(b) For the purpose of paragraph (a), the watt rating is the total estimated alternating current energy output of the solar photovoltaic system.

History:

2000 c 488 art 2 s 21; 2007 c 135 art 6 s 8; 2007 c 140 art 5 s 28,32; art 13 s 4; 2013 c 85 art 2 s 31; 2015 c 54 art 1 s 13; 2017 c 94 art 2 s 6,7

326B.38 MANUFACTURED ELECTRICAL PARTS; EXEMPTION.

Subdivision 1.Manufacturers.

Electrical components, apparatus, or appliances being manufactured within the limits of property which is owned or leased by a manufacturer and such manufacturer's production employees are not covered by sections 326B.31 to 326B.399.

Subd. 2.Electrical appliance units.

Installation, alteration, or repair of electrical appliance units are not covered by sections 326B.31 to 326B.399. For the purposes of this section, "electrical appliance units" means all electrical and fossil fuel appliances that use electricity including, but not limited to, furnaces, water heaters, stoves, clothes washers, dryers, and dishwashers. The installation of electrical wiring to an electrical appliance unit is covered by sections 326B.31 to 326B.399.

Subd. 3.Other units.

Planning, laying out, and installation of heating, ventilating, air conditioning, or refrigeration units are not covered by sections 326B.31 to 326B.399. For purposes of this section, heating, ventilating, air conditioning, or refrigeration units include, but are not limited to, air conditioning units, air conditioning evaporators, air conditioning condensers, air conditioning and refrigeration chillers, boilers, furnaces, air handling units, rooftop units, humidifiers, ice makers, and supermarket, ice arena, and bar/restaurant equipment. The installation of electrical wiring to the unit is covered by sections 326B.31 to 326B.399.

Subd. 4.Other equipment.

Planning, laying out, alteration, replacement, or repair of heating, ventilating, air conditioning, or refrigeration equipment, and associated devices, controls, and wiring including wiring in or on the equipment, are not covered by sections 326B.31 to 326B.399 when the work is performed by an employee of a heating, ventilating, air conditioning, or refrigeration contractor provided that the employee performing the work has received a certificate of completion from a heating, ventilating, air conditioning, or refrigeration apprenticeship program approved by the state of Minnesota or any class of personal license issued by the commissioner. Employees registered in an approved heating, ventilating, air conditioning, or refrigeration program may design, plan, alter, replace, or repair heating, ventilating, air conditioning, or refrigeration equipment, devices, and controls including wiring in or on the equipment, under the direction of an employee who has a certificate of completion from an approved program or any class of personal license issued by the commissioner. The installation of electrical wiring to the unit is covered by sections 326B.31 to 326B.399.

History:

1967 c 602 s 5; 1986 c 373 s 10; 1991 c 289 s 33; 2002 c 328 s 29; 2007 c 140 art 5 s 29,32; art 13 s 4

326B.399 CITATION.

Sections 326B.31 to 326B.399 shall be known as the "Minnesota Electrical Act."

History:

1967 c 602 s 8; 1986 c 373 s 12; 2007 c 140 art 5 s 30,32; art 13 s 4

PLUMBING

326B.41 PURPOSE.

The purpose of sections 326B.41 to 326B.49 is to promote the public health and safety through properly designed, acceptably installed, and adequately maintained plumbing systems.

History:

2007 c 140 art 6 s 13

326B.42 DEFINITIONS.

Subdivision 1.Words, terms, and phrases.

For purposes of sections 326B.41 to 326B.49, the terms defined in this section have the meanings given to them.

Subd. 1a.Contractor.

"Contractor" means a person who performs or offers to perform any plumbing work, with or without compensation, who is licensed as a contractor by the commissioner. Contractor includes plumbing contractors and restricted plumbing contractors.

Subd. 1b.Backflow prevention rebuilder.

A "backflow prevention rebuilder" is an individual who is qualified by training prescribed by the Plumbing Board and possesses a master or journeyworker plumber's license to engage in the testing, maintenance, and rebuilding of reduced pressure zone type backflow prevention assemblies as regulated by the Plumbing Code.

Subd. 1c.Backflow prevention tester.

A "backflow prevention tester" is an individual who is qualified by training prescribed by the Plumbing Board to engage in the testing of reduced pressure zone type backflow prevention assemblies as regulated by the Plumbing Code.

Subd. 1d.Commercial chemical dispensing system.

"Commercial chemical dispensing system" means a method of dispensing and diluting concentrated chemical solution in a commercial setting.

Subd. 1e.Commercial dishwashing machine.

"Commercial dishwashing machine" means a machine designed for commercial use to clean and sanitize plates, glasses, cups, bowls, utensils, and trays by applying sprays of detergent solution, with or without blasting media granules, and a sanitizing final rinse and the backflow prevention installed complies with ANSI/ASSE 1004 or is certified to National Sanitization Foundation (NSF) 3.

Subd. 2.Direct supervision.

The term "direct supervision," with respect to direct supervision of a plumber's apprentice or registered unlicensed individual by a master, restricted master, journeyworker, or restricted journeyworker plumber, means that:

(1) at all times while the plumber's apprentice or registered unlicensed individual is performing plumbing work, the supervising plumber is present at the location where the plumber's apprentice or registered unlicensed individual is working;

(2) the supervising plumber is physically present and immediately available to the plumber's apprentice or registered unlicensed individual at all times for assistance and direction;

(3) any form of electronic supervision does not meet the requirement of physically present;

(4) the supervising plumber actually reviews the plumbing work performed by the plumber's apprentice or registered unlicensed individual before the plumbing is operated; and

(5) the supervising plumber is able to and does determine that all plumbing work performed by the plumber's apprentice or registered unlicensed individual is performed in compliance with the plumbing code.

Subd. 3.

MS 2007 Supp [Renumbered subd 5]

Subd. 3.Journeyworker plumber.

A "journeyworker plumber" is an individual, other than a master plumber, who, as a principal occupation, is engaged as an employee of, or is otherwise working under the direction of, a master plumber in the practical installation of plumbing.

Subd. 4.

MS 2007 Supp [Renumbered subd 7]

Subd. 4.Master plumber.

A "master plumber" is an individual who is skilled in the planning, superintending, and the practical installation of plumbing, who is otherwise lawfully qualified to contract for plumbing and installations and to conduct the business of plumbing and who is familiar with the laws and rules governing the same.

Subd. 5.Municipality.

The term "municipality" shall have the meaning given to it in section 326B.103, subdivision 9.

Subd. 6.Plumber's apprentice.

A "plumber's apprentice" is any individual who is employed in the practical installation of plumbing under an apprenticeship agreement approved by the department under section 178.07.

Subd. 7.Plumbing code.

"Plumbing code" means Minnesota Rules, chapter 4714.

Subd. 8.Plumbing contractor.

"Plumbing contractor" means a licensed contractor whose responsible individual is a licensed master plumber.

Subd. 9.Responsible individual.

A contractor's "responsible individual" means the licensed master plumber or licensed restricted master plumber designated in writing by the contractor in the contractor's license application, or in another manner acceptable to the commissioner, as the individual responsible for the contractor's compliance with sections 326B.41 to 326B.49, all rules adopted under these sections and sections 326B.50 to 326B.59, and all orders issued under section 326B.082.

Subd. 10.Restricted plumbing contractor.

"Restricted plumbing contractor" means a licensed contractor whose responsible individual is a licensed restricted master plumber.

History:

(5872, 5887, 5887-23, 5887-30, 5887-30e) 1907 c 457 s 8; 1913 c 554 s 1; 1933 c 349 s 5; 1937 c 367 s 1,6; 1937 c 370 s 4; 1941 c 460 s 1; 1943 c 474 s 1; 1947 c 253 s 1; 1957 c 907 s 1-3; 1967 c 602 s 10-16; 1979 c 121 s 1; 1985 c 73 s 1-4; 1985 c 248 s 70; 1Sp1985 c 6 s 2; 1986 c 373 s 1,2; 1986 c 402 s 1; 1986 c 444; 1991 c 289 s 1-9; 2002 c 328 s 1-7; 2003 c 58 s 1; 2007 c 135 art 6 s 1; 2007 c 140 art 4 s 61; art 5 s 1-18; art 6 s 2,3,14,15; art 13 s 4; 2008 c 337 s 5,6,48,64; 2010 c 280 s 24,25; 2010 c 347 art 3 s 24-27,76; 2010 c 385 s 6; 1Sp2011 c 4 art 3 s 9-13; 2016 c 158 art 1 s 173; 2017 c 40 art 1 s 121; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8; 1Sp2021 c 10 art 3 s 12,13

326B.43 PLUMBING STANDARDS; RULES; AGREEMENT WITH MUNICIPALITY; EXEMPTION.

Subdivision 1.Rules.

The Plumbing Board may, by rule, prescribe minimum standards which shall be uniform and which shall be effective for all new plumbing installations performed anywhere in the state, including additions, extensions, alterations, and replacements. Notwithstanding the provisions of Minnesota Rules, part 1300.0215, subpart 6, as they apply to review of plans and specifications, the commissioner may allow plumbing construction, alteration, or extension to proceed without approval of the plans or specifications by the commissioner.

Except for powers granted to the Plumbing Board, the commissioner of labor and industry shall administer the provisions of sections 326B.42 to 326B.49 and for such purposes may employ plumbing inspectors and other assistants.

Subd. 1a.Licenses; experience.

All state plumbing inspectors and plumbing inspectors contracted by the department shall hold licenses as master or journeyworker plumbers and have five years of documented practical plumbing experience under this chapter.

Subd. 2.Agreement with municipality.

The commissioner may enter into an agreement with a municipality, in which the municipality agrees to perform plan and specification reviews required to be performed by the commissioner under Minnesota Rules, part 1300.0215, subpart 6, if:

(a) the municipality has adopted:

(1) the plumbing code;

(2) an ordinance that requires plumbing plans and specifications to be submitted to, reviewed, and approved by the municipality, except as provided in paragraph (n);

(3) an ordinance that authorizes the municipality to perform inspections required by the plumbing code; and

(4) an ordinance that authorizes the municipality to enforce the plumbing code in its entirety, except as provided in paragraph (p);

(b) the municipality agrees to review plumbing plans and specifications for all construction for which the plumbing code requires the review of plumbing plans and specifications, except as provided in paragraph (n);

(c) the municipality agrees that, when it reviews plumbing plans and specifications under paragraph (b), the review will:

(1) reflect the degree to which the plans and specifications affect the public health and conform to the provisions of the plumbing code;

(2) ensure that there is no physical connection between water supply systems that are safe for domestic use and those that are unsafe for domestic use; and

(3) ensure that there is no apparatus through which unsafe water may be discharged or drawn into a safe water supply system;

(d) the municipality agrees to perform all inspections required by the plumbing code in connection with projects for which the municipality reviews plumbing plans and specifications under paragraph (b);

(e) the commissioner determines that the individuals who will conduct the inspections and the plumbing plan and specification reviews for the municipality do not have any conflict of interest in conducting the inspections and the plan and specification reviews;

(f) individuals who will conduct the plumbing plan and specification reviews for the municipality are:

(1) licensed master plumbers;

(2) licensed professional engineers; or

(3) individuals who are working under the supervision of a licensed professional engineer or licensed master plumber and who are licensed master or journeyworker plumbers or hold a postsecondary degree in engineering;

(g) individuals who will conduct the plumbing plan and specification reviews for the municipality have passed a competency assessment required by the commissioner to assess the individual's competency at reviewing plumbing plans and specifications;

(h) individuals who will conduct the plumbing inspections for the municipality are licensed master or journeyworker plumbers, or inspectors meeting the competency requirements established in rules adopted under section 326B.135;

(i) the municipality agrees to enforce in its entirety the plumbing code on all projects, except as provided in paragraph (p);

(j) the municipality agrees to keep official records of all documents received, including plans, specifications, surveys, and plot plans, and of all plan reviews, permits and certificates issued, reports of inspections, and notices issued in connection with plumbing inspections and the review of plumbing plans and specifications;

(k) the municipality agrees to maintain the records described in paragraph (j) in the official records of the municipality for the period required for the retention of public records under section 138.17, and shall make these records readily available for review at the request of the commissioner;

(l) the municipality and the commissioner agree that if at any time during the agreement the municipality does not have in effect the plumbing code or any of ordinances described in paragraph (a), or if the commissioner determines that the municipality is not properly administering and enforcing the plumbing code or is otherwise not complying with the agreement:

(1) the commissioner may, effective 14 days after the municipality's receipt of written notice, terminate the agreement;

(2) the municipality may challenge the termination in a contested case before the commissioner pursuant to the Administrative Procedure Act; and

(3) while any challenge is pending under clause (2), the commissioner shall perform plan and specification reviews within the municipality under Minnesota Rules, part 1300.0215, subpart 6;

(m) the municipality and the commissioner agree that the municipality may terminate the agreement with or without cause on 90 days' written notice to the commissioner;

(n) the municipality and the commissioner agree that the municipality shall forward to the state for review all plumbing plans and specifications for the following types of projects within the municipality:

(1) state-licensed facilities as defined in section 326B.103, subdivision 13;

(2) public buildings as defined in section 326B.103, subdivision 11; and

(3) projects of a special nature for which department review is requested by either the municipality or the state;

(o) where the municipality forwards to the state for review plumbing plans and specifications, as provided in paragraph (n), the municipality shall not collect any fee for plan review, and the commissioner shall collect all applicable fees for plan review; and

(p) no municipality shall revoke, suspend, or place restrictions on any plumbing license issued by the state.

Subd. 3.Existing agreement with municipality.

Any agreement between the commissioner and a municipality in which the municipality has agreed to perform plan and specification reviews required to be performed by the commissioner under Minnesota Rules, part 1300.0215, subpart 6, that is in effect on December 1, 2007, shall remain in effect and shall not be required to be in compliance with subdivision 2. If any agreement to perform plan and specification reviews required to be performed by the commissioner under Minnesota Rules, part 1300.0215, subpart 6, in effect on December 1, 2007, is later terminated by operation of the terms of the agreement or by either the commissioner or the municipality, or expires, then any new agreement between the commissioner and the municipality to perform plan and specification reviews required to be performed by the commissioner under Minnesota Rules, part 1300.0215, subpart 6, shall comply with subdivision 2.

Subd. 4.Standards for capacity.

All new floor-mounted water closets in areas under jurisdiction of the plumbing code may not have a flush volume of more than 1.6 gallons. The water closets must meet the standards in the plumbing code and the standards of the American National Standards Institute.

Subd. 5.

[Repealed, 2010 c 183 s 24]

Subd. 6.Air admittance valves prohibited.

Mechanical devices and fittings with internal moving parts are prohibited from installation in plumbing venting systems.

History:

(5887-19) 1933 c 349 s 1; 1937 c 370 s 1; 1973 c 123 art 5 s 7; 1975 c 136 s 66; 1977 c 305 s 45; 1990 c 597 s 57; 1993 c 206 s 20; 1996 c 439 art 4 s 1; 1997 c 203 art 2 s 28; 2007 c 135 art 3 s 19,20; 2007 c 140 art 6 s 4,15; art 13 s 4; 2008 c 337 s 19,20; 2010 c 183 s 4,5; 2010 c 352 art 1 s 22; 2013 c 85 art 2 s 32; 2016 c 158 art 1 s 214; 2016 c 158 art 1 s 214; 2017 c 68 art 1 s 25,26; 1Sp2017 c 7 s 8

326B.435 PLUMBING BOARD.

Subdivision 1.Composition.

(a) The Plumbing Board shall consist of 14 members. Twelve members shall be appointed by the governor with the advice and consent of the senate and shall be voting members. Appointments of members by the governor shall be made in accordance with section 15.066. If the senate votes to refuse to consent to an appointment of a member made by the governor, the governor shall appoint a new member with the advice and consent of the senate. One member shall be the commissioner of labor and industry or the commissioner of labor and industry's designee, who shall be a voting member. One member shall be the commissioner of health or the commissioner of health's designee, who shall not be a voting member. Of the 12 appointed members, the composition shall be as follows:

(1) two members shall be municipal plumbing inspectors, one from the metropolitan area and one from greater Minnesota;

(2) one member shall be a licensed professional engineer specializing in plumbing designs or systems;

(3) two members shall be commercial/industrial plumbing contractors, one from the metropolitan area and one from greater Minnesota;

(4) one member shall be a residential plumbing contractor;

(5) two members shall be commercial/industrial journeyworkers, one from the metropolitan area and one from greater Minnesota;

(6) one member shall be a residential plumbing journeyworker;

(7) one member shall be a water conditioning contractor;

(8) one member shall be a municipal public water supply system operator or superintendent; and

(9) one member shall be a public member as defined by section 214.02.

One of the municipal plumbing inspectors shall be appointed for an initial term to end on December 31, 2010. The other municipal plumbing inspector shall be appointed for an initial term to end on December 31, 2011. The professional engineer shall be appointed for an initial term to end on December 31, 2011. One of the commercial/industrial plumbing contractors shall be appointed for an initial term to end on December 31, 2010. The other commercial/industrial plumbing contractor shall be appointed for an initial term to end on December 31, 2011. The residential plumbing contractor shall be appointed for an initial term to end on December 31, 2010. One of the commercial/industrial plumbing journeyworkers shall be appointed for an initial term to end on December 31, 2011. The other commercial/industrial plumbing journeyworker shall be appointed for an initial term to end on December 31, 2010. The residential plumbing journeyworker shall be appointed for an initial term to end on December 31, 2011. The water conditioning contractor shall be appointed for an initial term to end on December 31, 2011. The municipal public water supply system operator or superintendent shall be appointed for an initial term to end on December 31, 2010. The public member shall be appointed for a term to end December 31, 2010.

(b) The licensed professional engineer must possess a current Minnesota professional engineering license and maintain the license for the duration of their term. All other appointed members, except for the water conditioning contractor, the public member, and the municipal public water supply system operator or superintendent, must possess a current plumbing license issued by the Department of Labor and Industry and maintain that license for the duration of their term. The water conditioning contractor must be licensed as a water conditioning contractor by the Department of Labor and Industry and maintain the license for the duration of the term on the board. All appointed members must be residents of Minnesota at the time of and throughout the member's appointment. The term of any appointed member that does not maintain membership qualification status shall end on the date of the status change and the governor shall appoint a new member. It is the responsibility of the member to notify the board of the member's status change.

(c) For appointed members, except the initial terms designated in paragraph (a), each term shall be three years with the terms ending on December 31. Members appointed by the governor shall be limited to three consecutive terms. The governor shall, all or in part, reappoint the current members or appoint replacement members with the advice and consent of the senate. Midterm vacancies shall be filled for the remaining portion of the term. Vacancies occurring with less than six months time remaining in the term shall be filled for the existing term and the following three-year term. Members may serve until their successors are appointed but in no case later than July 1 in a year in which the term expires unless reappointed.

Subd. 2.Powers; duties; administrative support.

(a) The board shall have the power to:

(1) elect its chair, vice-chair, and secretary;

(2) adopt bylaws that specify the duties of its officers, the meeting dates of the board, and containing such other provisions as may be useful and necessary for the efficient conduct of the business of the board;

(3) adopt the Plumbing Code that must be followed in this state and any Plumbing Code amendments thereto. The Plumbing Code shall include the minimum standards described in sections 326B.43, subdivision 1, and 326B.52, subdivision 1. The board shall adopt the Plumbing Code and any amendments thereto pursuant to chapter 14 and as provided in subdivision 6, paragraphs (b), (c), and (d);

(4) review requests for final interpretations and issue final interpretations as provided in section 326B.127, subdivision 5;

(5) adopt rules that regulate the licensure, certification, or registration of plumbing contractors, journeyworkers, unlicensed individuals, master plumbers, restricted master plumbers, restricted journeyworkers, restricted plumbing contractors, backflow prevention rebuilders and testers, water conditioning contractors, and water conditioning installers, and other persons engaged in the design, installation, and alteration of plumbing systems or engaged in or working at the business of water conditioning installation or service, or engaged in or working at the business of medical gas system installation, maintenance, or repair, except for those individuals licensed under section 326.02, subdivisions 2 and 3. The board shall adopt these rules pursuant to chapter 14 and as provided in subdivision 6, paragraphs (e) and (f);

(6) adopt rules that regulate continuing education for individuals licensed as master plumbers, journeyworker plumbers, restricted master plumbers, restricted journeyworker plumbers, registered unlicensed individuals, water conditioning masters, and water conditioning journeyworkers, and for individuals certified under sections 326B.437 and 326B.438. The board shall adopt these rules pursuant to chapter 14 and as provided in subdivision 6, paragraphs (e) and (f);

(7) refer complaints or other communications to the commissioner, whether oral or written, as provided in subdivision 8, that allege or imply a violation of a statute, rule, or order that the commissioner has the authority to enforce pertaining to code compliance, licensure, or an offering to perform or performance of unlicensed plumbing services;

(8) approve per diem and expenses deemed necessary for its members as provided in subdivision 3;

(9) approve license reciprocity agreements;

(10) select from its members individuals to serve on any other state advisory council, board, or committee; and

(11) recommend the fees for licenses, registrations, and certifications.

Except for the powers granted to the Plumbing Board, the Board of Electricity, and the Board of High Pressure Piping Systems, the commissioner of labor and industry shall administer and enforce the provisions of this chapter and any rules promulgated pursuant thereto.

(b) The board shall comply with section 15.0597, subdivisions 2 and 4.

(c) The commissioner shall coordinate the board's rulemaking and recommendations with the recommendations and rulemaking conducted by the other boards created pursuant to this chapter. The commissioner shall provide staff support to the board. The support includes professional, legal, technical, and clerical staff necessary to perform rulemaking and other duties assigned to the board. The commissioner of labor and industry shall supply necessary office space and supplies to assist the board in its duties.

Subd. 3.Compensation.

(a) Members of the board may be compensated at a rate of $55 a day spent on board activities, when authorized by the board, plus expenses in the same manner and amount as authorized by the commissioner's plan adopted under section 43A.18, subdivision 2. Members who, as a result of time spent attending board meetings, incur child care expenses that would not otherwise have been incurred, may be reimbursed for those expenses upon board authorization.

(b) Members who are state employees or employees of the political subdivisions of the state must not receive the daily payment for activities that occur during working hours for which they are compensated by the state or political subdivision. However, a state or political subdivision employee may receive the daily payment if the employee uses vacation time or compensatory time accumulated in accordance with a collective bargaining agreement or compensation plan for board activities. Members who are state employees or employees of the political subdivisions of the state may receive the expenses provided for in this subdivision unless the expenses are reimbursed by another source. Members who are state employees or employees of political subdivisions of the state may be reimbursed for child care expenses only for time spent on board activities that are outside their working hours.

(c) The board shall adopt internal standards prescribing what constitutes a day spent on board activities for purposes of making daily payments under this subdivision.

Subd. 4.Removal; vacancy.

(a) An appointed member of the board may be removed by the governor at any time (1) for cause, after notice and hearing, or (2) after missing three consecutive meetings. The chair of the board shall inform the governor of an appointed member missing the three consecutive meetings. After the second consecutive missed meeting and before the next meeting, the secretary of the board shall notify the appointed member in writing that the member may be removed for missing the next meeting. In the case of a vacancy on the board, the governor shall, with the advice and consent of the senate, appoint a person to fill the vacancy for the remainder of the unexpired term.

(b) Vacancies shall be filled pursuant to section 15.0597, subdivisions 5 and 6.

Subd. 5.Membership vacancy within three months of appointment.

Notwithstanding any law to the contrary, when a membership on the board becomes vacant within three months after being filled through the appointments process, the governor may, upon notification to the office of secretary of state, choose a new member from the applications on hand and need not repeat the process.

Subd. 6.Officers, quorum, voting.

(a) The board shall elect annually from its members a chair, vice-chair, and secretary. A quorum of the board shall consist of a majority of members of the board qualified to vote on the matter in question. All questions concerning the manner in which a meeting is conducted or called that is not covered by statute shall be determined by Robert's Rules of Order (revised) unless otherwise specified by the bylaws.

(b) Except as provided in paragraph (c), each plumbing code amendment considered by the board that receives an affirmative two-thirds or more majority vote of all of the voting members of the board shall be included in the next plumbing code rulemaking proceeding initiated by the board. If a plumbing code amendment considered, or reconsidered, by the board receives less than a two-thirds majority vote of all the voting members of the board, the plumbing code amendment shall not be included in the next plumbing code rulemaking proceeding initiated by the board.

(c) If the plumbing code amendment considered by the board is to replace the Minnesota Plumbing Code with a model plumbing code, then the amendment may only be included in the next plumbing code rulemaking proceeding if it receives an affirmative two-thirds or more majority vote of all the voting members of the board.

(d) The board may reconsider plumbing code amendments during an active plumbing code rulemaking proceeding in which the amendment previously failed to receive a two-thirds majority vote or more of all the voting members of the board only if new or updated information that affects the plumbing code amendment is presented to the board. The board may also reconsider failed plumbing code amendments in subsequent plumbing code rulemaking proceedings.

(e) Each proposed rule and rule amendment considered by the board pursuant to the rulemaking authority specified in subdivision 2, paragraph (a), clauses (5) or (6), that receives an affirmative majority vote of all the voting members of the board shall be included in the next rulemaking proceeding initiated by the board. If a proposed rule or rule amendment considered, or reconsidered, by the board receives less than an affirmative majority vote of all the voting members of the board, the proposed rule or rule amendment shall not be included in the next rulemaking proceeding initiated by the board.

(f) The board may reconsider proposed rules or rule amendments during an active rulemaking proceeding in which the amendment previously failed to receive an affirmative majority vote of all the voting members of the board only if new or updated information that affects the proposed rule or rule amendment is presented to the board. The board may also reconsider failed proposed rules or rule amendments in subsequent rulemaking proceedings.

Subd. 7.Board meetings.

(a) The board shall hold meetings at such times as the board shall specify. Notice and conduct of all meetings shall be pursuant to chapter 13D and in such a manner as the bylaws may provide.

(b) If compliance with section 13D.02 is impractical, the board may conduct a meeting of its members by telephone or other electronic means so long as the following conditions are met:

(1) all members of the board participating in the meeting, wherever their physical location, can hear one another and can hear all discussion and testimony;

(2) members of the public present at the regular meeting location of the board can hear clearly all discussion and testimony and all votes of members of the board and, if needed, receive those services required by sections 15.44 and 15.441;

(3) at least one member of the board is physically present at the regular meeting location; and

(4) all votes are conducted by roll call, so each member's vote on each issue can be identified and recorded.

Each member of the board participating in a meeting by telephone or other electronic means is considered present at the meeting for purposes of determining a quorum and participating in all proceedings.

If telephone or other electronic means is used to conduct a regular, special, or emergency meeting, the board, to the extent practical, shall allow a person to monitor the meeting electronically from a remote location. The board may require the person making such a connection to pay for documented costs that the board incurs as a result of the additional connection.

If telephone or other electronic means is used to conduct a regular, special, or emergency meeting, the board shall provide notice of the regular meeting location, of the fact that some members may participate by telephone or other electronic means, and that a person may monitor the meeting electronically from a remote location. Any person monitoring the meeting electronically from a remote location may be required to pay documented costs incurred by the board as a result of the additional connection. The timing and method of providing notice is governed by section 13D.04.

Subd. 8.Complaint.

(a) The board shall promptly forward to the commissioner the substance of any complaint or communication it receives, whether written or oral, that alleges or implies a violation of a statute, rule, or order that the commissioner has the authority to enforce pertaining to the license or registration of any person authorized by the department to provide plumbing services, the performance or offering to perform plumbing services requiring licensure by an unlicensed person, or plumbing code compliance. Each complaint or communication that is forwarded to the commissioner shall be submitted on a form provided by the commissioner.

(b) The commissioner shall advise the board of the status of the complaint within 90 days after the board's written submission is received, or within 90 days after the board is provided with a written request for additional information or documentation from the commissioner or the commissioner's designee, whichever is later. The commissioner shall advise the board of the disposition of a complaint referred by the board within 180 days after the board's written submission is received. The commissioner shall annually report to the board a summary of the actions taken in response to complaints referred by the board.

Subd. 9.Data Practices Act.

The board is subject to chapter 13, the Minnesota Government Data Practices Act, and shall protect from unlawful disclosure data classified as not public.

Subd. 10.Official records.

The board shall make and preserve all records necessary to a full and accurate knowledge of its official activities in accordance with section 15.17.

History:

2007 c 140 art 4 s 61; art 6 s 5; art 13 s 4; 2008 c 337 s 21,64; 2010 c 183 s 6,7; 2010 c 280 s 26; 1Sp2011 c 4 art 3 s 14; 2017 c 68 art 1 s 26; c 94 art 2 s 8; 1Sp2017 c 7 s 8

326B.437 REDUCED PRESSURE BACKFLOW PREVENTION REBUILDERS AND TESTERS.

(a) No person shall perform or offer to perform the installation, maintenance, repair, replacement, or rebuilding of reduced pressure zone backflow prevention assemblies unless the person obtains a plumbing contractor's license. An individual shall not engage in the testing, maintenance, repair, or rebuilding of reduced pressure zone backflow prevention assemblies, as regulated by the Plumbing Code, unless the individual is certified by the commissioner as a backflow prevention rebuilder.

(b) An individual shall not engage in testing of a reduced pressure zone backflow prevention assembly, as regulated by the Plumbing Code, unless the individual possesses a backflow prevention rebuilder certificate or is certified by the commissioner as a backflow prevention tester.

(c) Certificates are issued for an initial period of two years and must be renewed every two years thereafter for as long as the certificate holder installs, maintains, repairs, rebuilds, or tests reduced pressure zone backflow prevention assemblies. For purposes of calculating fees under section 326B.092, an initial or renewed backflow prevention rebuilder or tester certificate shall be considered an entry level license.

(d) The Plumbing Board shall adopt expedited rules under section 14.389 that are related to the certification of backflow prevention rebuilders and backflow prevention testers. Section 326B.13, subdivision 8, does not apply to these rules. Notwithstanding the 18-month limitation under section 14.125, this authority expires on December 31, 2014.

(e) The department shall recognize certification programs that are a minimum of 16 contact hours and include the passage of an examination. The examination must consist of a practical and a written component. This paragraph expires when the Plumbing Board adopts rules under paragraph (d).

History:

1Sp2011 c 4 art 3 s 15

326B.438 MEDICAL GAS SYSTEMS.

Subdivision 1.Definitions.

(a) For the purposes of this section, the terms defined in this subdivision have the meanings given them.

(b) "Medical gas" means medical gas as defined under the National Fire Protection Association NFPA 99C Standard on Gas and Vacuum Systems.

(c) "Medical gas system" means a level 1, 2, or 3 piped medical gas and vacuum system as defined under the National Fire Protection Association NFPA 99C Standard on Gas and Vacuum Systems.

Subd. 2.License and certification required.

No person shall perform or offer to perform the installation, maintenance, or repair of medical gas systems unless the person obtains a contractor license. An individual shall not engage in the installation, maintenance, or repair of a medical gas system unless the individual possesses a current Minnesota master or journeyworker plumber's license and is certified by the commissioner under rules adopted by the Minnesota Plumbing Board. The certification must be renewed biennially for as long as the certificate holder engages in the installation, maintenance, or repair of medical gas systems.

Subd. 3.Exemptions.

An individual who on August 1, 2010, possesses a valid certificate meeting the requirements of the American Society of Sanitary Engineering (ASSE) Standard 6010 and is a qualified brazer in accordance with the provisions required in the National Fire Protection Association (NFPA) 99C is exempt from the licensing requirements of subdivision 2 and may install, maintain, and repair a medical gas system. This exemption applies only if the individual maintains a valid certification in accordance with ASSE Standard 6010 and the brazer qualifications in NFPA 99C, and is certified by the commissioner under rules adopted by the Minnesota Plumbing Board.

Subd. 4.Fees.

For the purpose of calculating fees under section 326B.092, an initial or renewed medical gas certificate issued by the commissioner according to subdivision 2 shall be considered a journeyworker level license.

History:

2010 c 183 s 8; 2010 c 280 s 39; 1Sp2011 c 4 art 3 s 16; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

326B.439 BAN ON LEAD IN PLUMBING.

Solders and flux containing not more than 0.2 percent lead, and pipes and pipe fittings containing not more than a weighted average of 0.25 percent lead when used with respect to the wetted surfaces of pipes, pipe fittings, plumbing fittings, and fixtures shall be used in any plumbing installation which conveys a potable water supply. A Minnesota seller of lead solder, except for a seller whose primary business is contracting in plumbing, heating, and air conditioning, shall not sell any solder containing 0.2 percent lead unless the seller displays a sign which states,

"Contains Lead

Minnesota law prohibits the use of this solder in any plumbing installation which is connected to a potable water supply."

History:

1985 c 279 s 2; 1988 c 689 art 2 s 232; 2008 c 337 s 64; 2016 c 189 art 8 s 2; 2017 c 68 art 1 s 11

326B.44 LOCAL REGULATIONS.

Any of the following entities may, by ordinance, adopt local regulations providing for plumbing permits, approval of plans and specifications, and inspections of plumbing, which regulations are not in conflict with the plumbing code: any city having a system of waterworks or sewerage, regardless of population; any town having a population of 5,000 or more according to the last federal census, exclusive of any statutory cities located therein; and the Metropolitan Airports Commission. No such entity shall prohibit plumbing contractors licensed by the commissioner from engaging in or working at the business of plumbing, except cities and statutory cities which, prior to April 21, 1933, by ordinance required the licensing of plumbers. No such entity shall require any person who engages in the business of plumbing to post a bond as a prerequisite for engaging in the business of plumbing, except the bond to the state required under section 326B.46 and except any performance bond required under a contract with the person for the performance of plumbing work for the entity. No such entity shall require any person who engages in the business of plumbing to maintain public liability insurance as a prerequisite for engaging in the business of plumbing, except the insurance required under section 326B.46 and except any public liability insurance required under a contract with the person for the performance of plumbing work for the entity. No city or town may require a license for persons performing building sewer or water service installation who have completed pipe laying training as prescribed by the commissioner of labor and industry. Any city by ordinance may prescribe regulations, reasonable standards, and inspections and grant permits to any person engaged in the business of installing water softeners, who is not licensed as a contractor by the commissioner, to connect water softening and water filtering equipment to private residence water distribution systems, where provision has been previously made therefor and openings left for that purpose or by use of cold water connections to a domestic water heater; where it is not necessary to rearrange, make any extension or alteration of, or addition to any pipe, fixture or plumbing connected with the water system except to connect the water softener, and provided the connections so made comply with minimum standards prescribed by the Plumbing Board.

History:

(5887-20) 1933 c 349 s 2; 1937 c 370 s 2; 1941 c 367 s 1; 1953 c 166 s 1; 1957 c 921 s 1; 1973 c 123 art 5 s 7; 1977 c 305 s 45; 1Sp2001 c 9 art 1 s 56; 2002 c 379 art 1 s 113; 2007 c 135 art 3 s 22; 2007 c 140 art 6 s 6,15; art 13 s 4; 2010 c 347 art 3 s 28,76; 2010 c 385 s 6

326B.45 VIOLATIONS TO BE REPORTED TO COMMISSIONER.

Such local authority as may be designated by any such ordinance for the issuance of such plumbing permits and approval of such plans shall report to the commissioner persistent or willful violation of the same and any incompetence of a licensed plumber observed by the local authority.

History:

(5887-21) 1933 c 349 s 3; 1977 c 305 s 45; 2007 c 140 art 6 s 7,15; art 13 s 4

326B.46 LICENSING, BOND AND INSURANCE.

Subdivision 1.License required.

(a) No individual shall engage in or work at the business of a master plumber, restricted master plumber, journeyworker plumber, and restricted journeyworker plumber unless licensed to do so by the commissioner. A license is not required for individuals performing building sewer or water service installation who have completed pipe laying training as prescribed by the commissioner. A license is not required for individuals servicing or installing a commercial chemical dispensing system or servicing or replacing a commercial dishwashing machine, including connecting a commercial chemical dispensing system or commercial dishwashing machine to a water line or drain line, provided that:

(1) the individual servicing or installing the commercial chemical dispensing system or servicing or replacing the commercial dishwashing machine is an employee of the manufacturer or distributor of the commercial chemical dispensing system or commercial dishwashing machine;

(2) the individual servicing or installing the commercial chemical dispensing system or servicing or replacing the commercial dishwashing machine has a minimum of 25 hours of classroom or laboratory training, a minimum of 20 hours of in-field training with a qualified technician on the types of systems being installed, followed by a minimum of 100 hours of supervised field experience. The training and experience curriculum required under this clause must be approved by the commissioner, in consultation with the manufacturer or distributor, but the commissioner shall not require training or experience hours in excess of the amounts specified in this clause;

(3) the manufacturer or distributor of the commercial chemical dispensing system or commercial dishwashing machine must meet the insurance requirements of section 326B.46, subdivision 2, paragraph (c);

(4) the connection is a push fit fitting, compression fitting, or threaded pipe fitting to an existing water line or drain, which has been initially installed by a licensed plumber; and

(5) the commercial chemical dispensing system complies with ASSE 1055 or contains code-approved integral backflow protection.

A master plumber may also work as a journeyworker plumber, a restricted journeyworker plumber, and a restricted master plumber. A journeyworker plumber may also work as a restricted journeyworker plumber. Anyone not so licensed may do plumbing work which complies with the provisions of the minimum standards prescribed by the Plumbing Board on premises or that part of premises owned and actually occupied by the worker as a residence, unless otherwise forbidden to do so by a local ordinance.

(b) No person shall engage in the business of planning, superintending, or installing plumbing or shall install plumbing in connection with the dealing in and selling of plumbing material and supplies unless at all times a licensed master plumber, or in cities and towns with a population of fewer than 5,000 according to the last federal census, a restricted master plumber, who shall be responsible for proper installation, is in charge of the plumbing work of the person.

(c) Except as provided in subdivision 1a, no person shall perform or offer to perform plumbing work with or without compensation unless the person obtains a contractor's license. A contractor's license does not of itself qualify its holder to perform the plumbing work authorized by holding a master, journeyworker, restricted master, or restricted journeyworker license.

Subd. 1a.Exemptions from licensing.

(a) An individual without a contractor license may do plumbing work on the individual's residence in accordance with subdivision 1, paragraph (a).

(b) An individual who is an employee working on the maintenance and repair of plumbing equipment, apparatus, or facilities owned or leased by the individual's employer and which is within the limits of property owned or leased, and operated or maintained by the individual's employer, shall not be required to maintain a contractor license as long as the employer has on file with the commissioner a current certificate of responsible individual. The responsible individual must be a master plumber or, in an area of the state that is not a city or town with a population of more than 5,000 according to the last federal census, a restricted master plumber. The certificate must be signed by the responsible individual and must state that the person signing the certificate is responsible for ensuring that the maintenance and repair work performed by the employer's employees complies with sections 326B.41 to 326B.49, all rules adopted under those sections and sections 326B.50 to 326B.59, and all orders issued under section 326B.082. The employer must pay a filing fee to file a certificate of responsible individual with the commissioner. The certificate shall expire two years from the date of filing. In order to maintain a current certificate of responsible individual, the employer must resubmit a certificate of responsible individual, with a filing fee, no later than two years from the date of the previous submittal. The filing of the certificate of responsible individual does not exempt any employee of the employer from the requirements of this chapter regarding individual licensing as a plumber or registration as an unlicensed individual.

(c) If a contractor employs a licensed plumber, the licensed plumber does not need a separate contractor license to perform plumbing work on behalf of the employer within the scope of the licensed plumber's license.

(d) A person may perform and offer to perform building sewer or water service installation without a contractor's license if the person is in compliance with the bond and insurance requirements of subdivision 2.

(e) Waterproofing contractors licensed under sections 326B.801 to 326B.89 may install in existing single-family dwellings a single sump pump, which receives subsurface or seepage water through a subsoil drain and discharges to grade. The Minnesota Plumbing Code applies to this paragraph, including provisions relating to proper installation, use of approved materials, and proper support of the materials.

Subd. 1b.Employment of master plumber or restricted master plumber.

(a) Each contractor must designate a responsible licensed plumber, who shall be responsible for the performance of all plumbing work in accordance with sections 326B.41 to 326B.49, all rules adopted under these sections and sections 326B.50 to 326B.59, and all orders issued under section 326B.082. A plumbing contractor's responsible individual must be a master plumber. A restricted plumbing contractor's responsible individual must be a master plumber or a restricted master plumber. A plumbing contractor license authorizes the contractor to offer to perform and, through licensed and registered individuals, to perform plumbing work in all areas of the state. A restricted plumbing contractor license authorizes the contractor to offer to perform and, through licensed and registered individuals, to perform plumbing work in all areas of the state except in cities and towns with a population of more than 5,000 according to the last federal census.

(b) If the contractor is an individual or sole proprietorship, the responsible licensed individual must be the individual, proprietor, or managing employee. If the contractor is a partnership, the responsible licensed individual must be a general partner or managing employee. If the contractor is a limited liability company, the responsible licensed individual must be a chief manager or managing employee. If the contractor is a corporation, the responsible licensed individual must be an officer or managing employee. If the responsible licensed individual is a managing employee, the responsible licensed individual must be actively engaged in performing plumbing work on behalf of the contractor, and cannot be employed in any capacity as a plumber for any other contractor. An individual may be the responsible licensed individual for only one contractor.

(c) All applications and renewals for contractor licenses shall include a verified statement that the applicant or licensee has complied with this subdivision.

(d) Upon the departure or disqualification of a licensee's responsible licensed individual because of death, disability, retirement, position change, or other reason, the licensee must notify the commissioner within 15 business days. The licensee shall have 60 days from the departure of the responsible licensed individual to obtain a new responsible licensed individual. Failure to secure a new responsible licensed individual within 60 days will, with or without notice, result in the voluntary termination of the license.

Subd. 2.Bond; insurance.

(a) The bond and insurance requirements of paragraphs (b) and (c) apply to each person who performs or offers to perform plumbing work within the state, including any person who offers to perform or performs sewer or water service installation without a contractor's license. If the person performs or offers to perform any plumbing work other than sewer or water service installation, then the person must meet the requirements of paragraphs (b) and (c) as a condition of holding a contractor's license.

(b) Each person who performs or offers to perform plumbing work within the state shall give and maintain bond to the state in the penal sum of at least $25,000 for (1) all plumbing work entered into within the state or (2) all plumbing work and subsurface sewage treatment work entered into within the state. The bond must comply with section 326B.0921. If the bond is for both plumbing work and subsurface sewage treatment work, the bond must comply with the requirements of this section and section 115.56, subdivision 2, paragraph (e).

(c) Each person who performs or offers to perform plumbing work within the state shall have and maintain in effect public liability insurance, including products liability insurance with limits of at least $50,000 per person and $100,000 per occurrence and property damage insurance with limits of at least $10,000. The insurance shall be written by an insurer licensed to do business in the state of Minnesota. Each person who performs or offers to perform plumbing work within the state shall maintain on file with the commissioner a certificate evidencing the insurance. In the event of a policy cancellation, the insurer shall send written notice to the commissioner at the same time that a cancellation request is received from or a notice is sent to the insured.

Subd. 3.

[Repealed, 2010 c 347 art 3 s 29,76; 2010 c 385 s 6]

Subd. 4.

[Repealed, 2010 c 347 art 3 s 29,76; 2010 c 385 s 6]

Subd. 5.Exterior connections.

Persons licensed as manufactured home installers under chapter 327B are not required to be licensed under sections 326B.42 to 326B.49 when connecting the exterior building drain sewer outlets to the aboveground building sewer system and when connecting the exterior water line to the aboveground water system to the manufactured home as described in National Manufactured Housing Construction and Safety Standards Act of 1974, United States Code, title 42, section 5401 et seq. No additional licensure, bond, or insurance related to the scope of work permitted under this subdivision may be required of a licensed manufactured home installer by any unit of government.

Subd. 6.Well contractor exempt from licensing and bond; conditions.

No license, registration, or bond under sections 326B.42 to 326B.49 is required of a well contractor or a limited well/boring contractor who is licensed and bonded under section 103I.525 or 103I.531 and is engaged in the work or business of installing:

(1) water service pipe from a well to a pressure tank;

(2) a frost-free water hydrant with an antisiphon device on a well water service pipe located entirely outside of a building requiring potable water;

(3) a control valve, located outside the building, on a well water service pipe; or

(4) a main control valve located within two feet of the pressure tank on the distribution supply line.

Subd. 7.License number to be displayed.

Any vehicle used by a plumbing contractor or restricted plumbing contractor while performing plumbing work for which a contractor's license is required shall have the contractor's name and license number as it appears on the contractor's license in contrasting color with characters at least three inches high and one-half inch in width affixed to each side of the vehicle.

History:

(5887-22) 1933 c 349 s 4; 1937 c 370 s 3; 1941 c 367 s 2; 1973 c 123 art 5 s 7; 1977 c 305 s 45; 1978 c 604 s 1; 1980 c 487 s 10; 1986 c 444; 1999 c 245 art 2 s 39-41; 2004 c 251 s 12; 2007 c 135 art 3 s 23; 2007 c 140 art 6 s 8,15; art 13 s 4; 2008 c 337 s 22-24; 2009 c 78 art 5 s 14; 2009 c 109 s 13; 2010 c 347 art 3 s 29,76; 2010 c 384 s 87,88; 2010 c 385 s 6; 2011 c 21 s 1; 1Sp2011 c 4 art 3 s 17-21; 2012 c 159 s 1; 2012 c 295 art 1 s 15; 2015 c 54 art 1 s 14,15; 2017 c 68 art 1 s 12,26; 1Sp2017 c 7 s 8; 1Sp2019 c 7 art 9 s 9; 1Sp2021 c 10 art 3 s 14

326B.47 UNLICENSED INDIVIDUALS.

Subdivision 1.Registration; supervision; records.

(a) All unlicensed individuals, other than plumber's apprentices and individuals who have completed pipe laying training as prescribed by the commissioner, must be registered under subdivision 3.

(b) A plumber's apprentice or registered unlicensed individual is authorized to assist in the installation of plumbing only while under the direct supervision of a master, restricted master, journeyworker, or restricted journeyworker plumber. The master, restricted master, journeyworker, or restricted journeyworker plumber is responsible for ensuring that all plumbing work performed by the plumber's apprentice or registered unlicensed individual complies with the Plumbing Code. The supervising master, restricted master, journeyworker, or restricted journeyworker must be licensed and must be employed by the same employer as the plumber's apprentice or registered unlicensed individual. Licensed individuals shall not permit plumber's apprentices or registered unlicensed individuals to perform plumbing work except under the direct supervision of an individual actually licensed to perform such work. Plumber's apprentices and registered unlicensed individuals shall not supervise the performance of plumbing work or make assignments of plumbing work to unlicensed individuals.

(c) Contractors employing plumber's apprentices or registered unlicensed individuals to perform plumbing work shall maintain records establishing compliance with this subdivision that shall identify all plumber's apprentices and registered unlicensed individuals performing plumbing work, and shall permit the department to examine and copy all such records.

Subd. 2.Journeyworker exam.

A plumber's apprentice or registered unlicensed individual who has completed four years of practical plumbing experience is eligible to take the journeyworker plumbing examination. Up to 24 months of practical plumbing experience prior to becoming a plumber's apprentice or registered unlicensed individual may be applied to the four-year experience requirement. However, none of this practical plumbing experience may be applied if the individual did not have any practical plumbing experience in the 12-month period immediately prior to becoming a plumber's apprentice or registered unlicensed individual. The Plumbing Board may adopt rules to evaluate whether the individual's past practical plumbing experience is applicable in preparing for the journeyworker's examination. If two years after completing the training the individual has not taken the examination, the four years of experience shall be forfeited.

The commissioner may allow an extension of the two-year period for taking the exam for cases of hardship or other appropriate circumstances.

Subd. 3.Registration, rules, applications, renewals, and fees.

An unlicensed individual may register by completing and submitting to the commissioner an application form provided by the commissioner, with all fees required by section 326B.092. A completed application form must state the date the individual began training, the individual's age, schooling, previous experience, and employer, and other information required by the commissioner. The Plumbing Board may prescribe rules, not inconsistent with this section, for the registration of unlicensed individuals. Applications for initial registration may be submitted at any time. Registration must be renewed annually and shall be for the period from July 1 of each year to June 30 of the following year.

History:

1986 c 402 s 2; 1986 c 444; 2007 c 135 art 3 s 24; 2007 c 140 art 6 s 9,15; art 13 s 4; 2010 c 280 s 27; 2010 c 347 art 3 s 30,76; 2010 c 385 s 6; 1Sp2011 c 4 art 3 s 22,23; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

326B.475 RESTRICTED PLUMBER LICENSE.

Subdivision 1.Licensure.

(a) The commissioner of labor and industry shall grant a restricted journeyworker or restricted master plumber license to an individual if:

(1) the individual completes an application with information required by the commissioner of labor and industry;

(2) the completed application is accompanied by a fee of $30;

(3) the commissioner of labor and industry receives the completed application and fee between October 1, 2009, and October 15, 2009;

(4) the completed application for a restricted journeyworker plumber license demonstrates that, prior to the application, the applicant has had at least two years of practical plumbing experience in the plumbing trade; and

(5) the completed application for a restricted master plumber license demonstrates that, prior to the application, the applicant has had:

(i) at least four years of practical plumbing experience in the plumbing trade; or

(ii) at least two years of practical plumbing experience as a plumbing contractor in the plumbing trade.

(b) For applications received between October 1, 2009, and October 15, 2009, the commissioner may waive penalties for an applicant who failed to post a bond after June 30, 1999, under section 326B.46, subdivision 2, if the commissioner finds that the penalty would cause undue hardship or the waiver is otherwise warranted under the circumstances.

Subd. 2.Use of license.

A restricted master plumber and restricted journeyworker plumber may engage in the plumbing trade in all areas of the state except in cities and towns with a population of more than 5,000 according to the last federal census.

Subd. 3.Application period.

Applications for restricted master plumber and restricted journeyworker plumber licenses must be submitted to the commissioner prior to October 1, 2008.

Subd. 4.Renewal; use period for license.

A restricted master plumber and restricted journeyworker plumber license must be renewed for as long as that licensee engages in the plumbing trade. Notwithstanding section 326B.094, failure to renew a restricted master plumber and restricted journeyworker plumber license within 12 months after the expiration date will result in permanent forfeiture of the restricted master plumber and restricted journeyworker plumber license.

Subd. 5.

[Repealed, 2010 c 347 art 3 s 75]

Subd. 6.

[Repealed, 2010 c 347 art 3 s 75]

Subd. 7.Fee.

The renewal fee for the restricted master plumber and restricted journeyworker plumber licenses is the same fee as for a master or journeyworker plumber license, respectively.

History:

2007 c 135 art 3 s 25; 2007 c 140 art 6 s 10,15; art 13 s 4; 2008 c 282 s 1,2; 2008 c 337 s 64; 2009 c 78 art 5 s 15,16; 2009 c 153 s 5; 2010 c 183 s 9,10; 2010 c 347 art 3 s 31,32,76; 2010 c 385 s 6; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8; 1Sp2019 c 7 art 9 s 10

326B.48 RECIPROCITY WITH OTHER STATES.

(a) The commissioner may enter into reciprocity agreements for personal licenses with another state if approved by the board. Once approved by the board, the commissioner may issue a plumber's license without requiring the applicant to pass an examination provided the applicant:

(1) submits an application under section 326B.49;

(2) pays the fee required under section 326B.49; and

(3) holds a valid comparable license in the state participating in the agreement.

(b) Agreements are subject to the following:

(1) The parties to the agreement must administer a statewide licensing program that includes examination and qualifying experience or training comparable to Minnesota's.

(2) The experience and training requirements under which an individual applicant qualified for examination in the qualifying state must be deemed equal to or greater than required for an applicant making application in Minnesota at the time the applicant acquired the license in the qualifying state.

(3) The applicant must have acquired the license in the qualifying state through an examination deemed equivalent to the same class of license examination in Minnesota. A lesser class of license may be granted where the applicant has acquired a greater class of license in the qualifying state and the applicant otherwise meets the conditions of this section.

(4) At the time of application, the applicant must hold a valid license in the qualifying state and have held the license continuously for at least one year before making application in Minnesota.

(5) An applicant is not eligible for a license under this section if the applicant has failed the same or greater class of license examination in Minnesota, or if the applicant's license of the same or greater class has been revoked or suspended.

(6) An applicant who has failed to renew a plumber's license for two years or more after its expiration is not eligible for a license under this section.

History:

1977 c 19 s 1; 1992 c 464 art 1 s 35; 2007 c 135 art 3 s 26; 2007 c 140 art 6 s 11,15; art 13 s 4

326B.49 APPLICATIONS, FEES.

Subdivision 1.Application, examination, and license fees.

(a) Applications for master and journeyworker plumber's licenses shall be made to the commissioner, with all fees required by section 326B.092. Unless the applicant is entitled to a renewal, the applicant shall be licensed by the commissioner only after passing a satisfactory examination developed and administered by the commissioner, based upon rules adopted by the Plumbing Board, showing fitness.

(b) All journeyworker plumber's licenses shall expire on December 31 of each odd-numbered year after issuance or renewal. All master plumber's licenses shall expire on December 31 of each even-numbered year after issuance or renewal. All renewed master and journeyworker plumber's licenses shall be two-year licenses.

(c) Applications for contractor licenses shall be made to the commissioner, with all fees required by section 326B.092. All contractor licenses shall expire on December 31 of each odd-numbered year after issuance or renewal.

(d) For purposes of calculating license fees and renewal license fees required under section 326B.092:

(1) the following licenses shall be considered business licenses: plumbing contractor and restricted plumbing contractor;

(2) the following licenses shall be considered master licenses: master plumber and restricted master plumber;

(3) the following licenses shall be considered journeyworker licenses: journeyworker plumber and restricted journeyworker plumber; and

(4) the registration of an unlicensed individual under section 326B.47, subdivision 3, shall be considered an entry level license.

(e) For each filing of a certificate of responsible individual by an employer, the fee is $100.

(f) The commissioner shall charge each person giving bond under section 326B.46, subdivision 2, paragraph (b), a biennial bond filing fee of $100, unless the person is a licensed contractor.

Subd. 2.Fees for plan reviews and audits.

Plumbing system plans and specifications that are submitted to the commissioner for review shall be accompanied by the appropriate plan examination fees. If the commissioner determines, upon review of the plans, that inadequate fees were paid, the necessary additional fees shall be paid prior to plan approval. The commissioner shall charge the following fees for plan reviews and audits of plumbing installations for public, commercial, and industrial buildings:

(1) systems with both water distribution and drain, waste, and vent systems and having:

(i) 25 or fewer drainage fixture units, $150;

(ii) 26 to 50 drainage fixture units, $250;

(iii) 51 to 150 drainage fixture units, $350;

(iv) 151 to 249 drainage fixture units, $500;

(v) 250 or more drainage fixture units, $3 per drainage fixture unit to a maximum of $4,000; and

(vi) interceptors, separators, or catch basins, $70 per interceptor, separator, or catch basin design;

(2) building sewer service only, $150;

(3) building water service only, $150;

(4) building water distribution system only, no drainage system, $5 per supply fixture unit or $150, whichever is greater;

(5) storm drainage system, a minimum fee of $150 or:

(i) $50 per drain opening, up to a maximum of $500; and

(ii) $70 per interceptor, separator, or catch basin design;

(6) manufactured home park or campground, one to 25 sites, $300;

(7) manufactured home park or campground, 26 to 50 sites, $350;

(8) manufactured home park or campground, 51 to 125 sites, $400;

(9) manufactured home park or campground, more than 125 sites, $500; and

(10) revision to previously reviewed or incomplete plans:

(i) review of plans for which the commissioner has issued two or more requests for additional information, per review, $100 or ten percent of the original fee, whichever is greater;

(ii) proposer-requested revision with no increase in project scope, $50 or ten percent of original fee, whichever is greater; and

(iii) proposer-requested revision with an increase in project scope, $50 plus the difference between the original project fee and the revised project fee.

Subd. 3.Permits; fees.

(a) Before commencement of a plumbing installation to be inspected by the commissioner, the plumbing contractor or registered plumbing employer performing the plumbing work must submit to the commissioner an application for a permit and the permit and inspection fees in paragraphs (b) to (f).

(b) The permit fee is $100.

(c) The residential inspection fee is $50 for each inspection trip.

(d) The public, commercial, and industrial inspection fees are as follows:

(1) for systems with water distribution, drain, waste, and vent system connection:

(i) $25 for each fixture, permanently connected appliance, floor drain, or other appurtenance;

(ii) $25 for each water conditioning, water treatment, or water filtration system; and

(iii) $25 for each interceptor, separator, catch basin, or manhole;

(2) roof drains, $25 for each drain;

(3) building sewer service only, $100;

(4) building water service only, $100;

(5) building water distribution system only, no drainage system, $5 for each fixture supplied;

(6) storm drainage system, a minimum fee of $25 for each drain opening, interceptor, separator, or catch basin;

(7) manufactured home park or campground, $25 for each site;

(8) reinspection fee to verify corrections, regardless of the total fee submitted, $100 for each reinspection; and

(9) each $100 in fees paid covers one inspection trip.

(e) In addition to the fees in paragraph (d), the fee submitter must pay an hourly rate of $80 during regular business hours, or $120 when inspections are requested to be performed outside of normal work hours or on weekends and holidays, with a two-hour minimum where the fee submitter requests inspections of installations as systems are being installed.

(f) The fee submitter must pay a fee equal to two hours at the hourly rate of $80 when inspections scheduled by the submitter are not able to be completed because the work is not complete.

History:

(5887-25) 1933 c 349 s 7; 1937 c 370 s 5; 1941 c 367 s 3; 1959 c 78 s 1; 1974 c 205 s 1; 1974 c 471 s 15; 1975 c 310 s 31; 1976 c 2 s 169; 1977 c 305 s 45; 1986 c 444; 1Sp2003 c 14 art 7 s 82; 1Sp2005 c 4 art 6 s 50; 2007 c 135 art 3 s 27; 2007 c 140 art 6 s 12,15; art 13 s 4; 2009 c 78 art 5 s 17; 2010 c 347 art 3 s 33,76; 2010 c 385 s 6; 1Sp2011 c 4 art 3 s 24; 2012 c 295 art 1 s 16; 2013 c 85 art 2 s 33,34; 2015 c 54 art 1 s 16; 2016 c 189 art 8 s 3; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

WATER CONDITIONING

326B.50 DEFINITIONS.

Subdivision 1.Scope.

For the purposes of sections 326B.50 to 326B.59, the terms defined in this section have the meanings given them.

Subd. 1a.Responsible licensed master.

"Responsible licensed master" means the licensed water conditioning master or licensed master plumber designated in writing by the water conditioning contractor in the water conditioning contractor's license application, or in another manner acceptable to the commissioner, as the individual responsible for the water conditioning contractor's compliance with sections 326B.50 to 326B.59, all rules adopted under these sections, the Minnesota Plumbing Code, and all orders issued under section 326B.082.

Subd. 2.Single family residential unit.

"Single family residential unit" means a building or portion thereof which is arranged, designed, used or intended to be used for residential occupancy by one family, but not including a motel, hotel or rooming house.

Subd. 2a.Water conditioning contractor.

"Water conditioning contractor" means a person who performs or offers to perform any water conditioning installation or water conditioning servicing, with or without compensation, who is licensed as a water conditioning contractor by the commissioner.

Subd. 3.Water conditioning installation.

"Water conditioning installation" means the installation of appliances, appurtenances, and fixtures designed to treat water so as to alter, modify, add or remove mineral, chemical or bacterial content, said installation to be made in a water distribution system serving:

(1) a single family residential unit, which has been initially established by a licensed plumber, and does not involve a direct connection without an air gap to a soil or waste pipe; or

(2) a multifamily or nonresidential building, where the plumbing installation has been initially established by a licensed plumber. Isolation valves shall be required for all water conditioning installations and shall be readily accessible. Water conditioning installation does not include:

(i) a valve that allows isolation of the water conditioning installation;

(ii) piping greater than two-inch nominal pipe size; or

(iii) a direct connection without an air gap to a soil or waste pipe.

Subd. 3a.Water conditioning journeyworker.

"Water conditioning journeyworker" means an individual, other than a water conditioning master, who has demonstrated practical knowledge of water conditioning installation and servicing, and who is licensed by the commissioner as a water conditioning journeyworker.

Subd. 3b.Water conditioning master.

"Water conditioning master" means an individual who has demonstrated skill in planning, superintending, installing, and servicing water conditioning installations, and who is licensed by the commissioner as a water conditioning master.

Subd. 4.Water conditioning servicing.

"Water conditioning servicing" means the servicing (including servicing prior to installation) of a water conditioning installation.

Subd. 5.Direct supervision.

"Direct supervision," with respect to direct supervision of a registered unlicensed individual, means that:

(1) at all times while the registered unlicensed individual is performing water conditioning installation work, a direct supervisor is present at the location where the registered unlicensed individual is working;

(2) the direct supervisor is physically present and immediately available to the registered unlicensed individual at all times for assistance and direction;

(3) any form of electronic supervision does not meet the requirement of being physically present;

(4) the direct supervisor reviews the water conditioning installation work performed by the registered unlicensed individual before the water conditioning installation is operated; and

(5) the direct supervisor determines that all water conditioning installation work performed by the registered unlicensed individual is performed in compliance with sections 326B.50 to 326B.59, all rules adopted under these sections, the Minnesota Plumbing Code, and all orders issued under section 326B.082.

Subd. 6.Direct supervisor.

"Direct supervisor" means a master plumber, journeyworker plumber, restricted master plumber, restricted journeyworker plumber, water conditioning master, or water conditioning journeyworker responsible for providing direct supervision of a registered unlicensed individual.

History:

1969 c 898 s 5; 1977 c 305 s 45; 1985 c 248 s 70; 1989 c 209 art 2 s 1; 2007 c 140 art 7 s 6-9,12,13; art 13 s 4; 2010 c 347 art 3 s 34-37,76; 2010 c 385 s 6; 2017 c 68 art 1 s 26; c 94 art 2 s 9-11; 1Sp2017 c 7 s 8

326B.52 WATER CONDITIONING CONTRACTOR AND INSTALLER STANDARDS.

Subdivision 1.Rulemaking by Plumbing Board.

The Plumbing Board shall, by rule, prescribe minimum standards which shall be uniform, and which standards shall thereafter be effective for all new water conditioning servicing and water conditioning installations performed anywhere in the state, including additions, extensions, alterations, and replacements.

Subd. 2.Inspectors.

Except for powers granted to the Plumbing Board, the commissioner shall administer the provisions of sections 326B.50 to 326B.59 and for such purposes may employ water conditioning inspectors and other assistants.

History:

1969 c 898 s 1; 1973 c 123 art 5 s 7; 1977 c 305 s 45; 1985 c 248 s 70; 1989 c 209 art 2 s 1; 2007 c 140 art 7 s 1,13; art 13 s 4; 2010 c 183 s 11

326B.53 LOCAL REGULATIONS.

Any city, county, or town may, by ordinance, adopt local regulations providing for water conditioning permits, bonds, approval of plans, and inspections of water conditioning installations and servicing, which regulations shall not be in conflict with the rules on the same subject prescribed by the commissioner. No city, county, or town shall prohibit water conditioning contractors or installers licensed by the commissioner from engaging in or working at the business.

History:

1969 c 898 s 2; 1973 c 123 art 5 s 7; 1977 c 305 s 45; 2007 c 140 art 7 s 2,13; art 13 s 4; 2010 c 183 s 12

326B.54 VIOLATIONS TO BE REPORTED TO COMMISSIONER.

Such local authority as may be designated by any such ordinance for the issuance of such water conditioning installation and servicing permits and approval of such plans shall report to the commissioner persistent or willful violations of the same and any incompetence of a licensed water conditioning contractor, licensed water conditioning master, or licensed water conditioning journeyworker observed by the local authority.

History:

1969 c 898 s 3; 1977 c 305 s 45; 2007 c 140 art 7 s 3,13; art 13 s 4; 2010 c 347 art 3 s 38,76; 2010 c 385 s 6; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

326B.55 LICENSING; QUALIFICATIONS; RULES.

Subdivision 1.Licensing.

(a) Except as provided in paragraph (d), no individual shall perform water conditioning installation or water conditioning servicing unless licensed by the commissioner as a master plumber, journeyworker plumber, water conditioning master, or water conditioning journeyworker, or, in all areas of the state except in cities and towns with a population of more than 5,000 according to the last federal census, as a restricted master plumber or restricted journeyworker plumber.

(b) Except as provided in paragraph (e), no person shall perform or offer to perform water conditioning installation or water conditioning servicing with or without compensation unless the person obtains a water conditioning contractor's license. A water conditioning contractor's license does not of itself qualify its holder to perform the water conditioning installation or water conditioning servicing authorized by holding a water conditioning master or water conditioning journeyworker license.

(c) Except as provided in paragraph (d), no person shall engage in or work at the business of water conditioning installation or servicing anywhere in the state unless at all times an individual licensed as a master plumber or water conditioning master by the commissioner, who is responsible for the proper installation and servicing, is in charge of the water conditioning installation and servicing work.

If a water conditioning contractor employs a licensed master, restricted master, journeyworker or restricted journeyworker plumber, or a licensed water conditioning master or journeyworker, then the licensed individual does not need a separate water conditioning contractor license to perform water conditioning installation or servicing on behalf of the employer within the scope of the individual's plumber license.

(d) No water conditioning contractor, water conditioning master, or water conditioning journeyworker license is required:

(1) for exchanges of portable water conditioning equipment; or

(2) for an individual to perform water conditioning work that complies with the minimum standards prescribed by the Plumbing Board on premises or that part of premises owned and occupied by the individual as a residence, unless otherwise prohibited by a local ordinance. The scope of work that a master plumber, restricted master plumber, journeyworker plumber, or restricted journeyworker plumber is authorized to perform as an employee of a licensed water conditioning contractor shall be limited to the scope of work that the licensed water conditioning contractor is licensed to perform.

Subd. 2.Qualifications for licensing.

(a) A water conditioning master license shall be issued only to an individual who has demonstrated skill in planning, superintending, servicing, and installing water conditioning installations, and has successfully passed the examination for water conditioning masters. A water conditioning journeyworker license shall only be issued to an individual other than a water conditioning master who has demonstrated practical knowledge of water conditioning installation, and has successfully passed the examination for water conditioning journeyworkers. A water conditioning journeyworker must successfully pass the examination for water conditioning masters before being licensed as a water conditioning master.

(b) Each water conditioning contractor must designate a responsible licensed master plumber or a responsible licensed water conditioning master, who shall be responsible for the performance of all water conditioning installation and servicing in accordance with the requirements of sections 326B.50 to 326B.59, all rules adopted under sections 326B.50 to 326B.59, the Minnesota Plumbing Code, and all orders issued under section 326B.082. If the water conditioning contractor is an individual or sole proprietorship, the responsible licensed master must be the individual, proprietor, or managing employee. If the water conditioning contractor is a partnership, the responsible licensed master must be a general partner or managing employee. If the water conditioning contractor is a limited liability company, the responsible licensed master must be a chief manager or managing employee. If the water conditioning contractor is a corporation, the responsible licensed master must be an officer or managing employee. If the responsible licensed master is a managing employee, the responsible licensed master must be actively engaged in performing water conditioning work on behalf of the water conditioning contractor and cannot be employed in any capacity as a water conditioning master or water conditioning journeyworker for any other water conditioning contractor. An individual must not be the responsible licensed master for more than one water conditioning contractor.

(c) All applications and renewals for water conditioning contractor licenses shall include a verified statement that the applicant or licensee has complied with paragraph (b).

(d) Each application and renewal for a water conditioning master license, water conditioning journeyworker license, or a water conditioning contractor license shall be accompanied by all fees required by section 326B.092.

Subd. 3.Commissioner.

The commissioner shall:

(1) license water conditioning contractors, water conditioning masters, and water conditioning journeyworkers; and

(2) collect the fees required by section 326B.092.

Subd. 4.Plumber's apprentices.

(a) A plumber's apprentice who is registered under section 326B.47 is authorized to assist in water conditioning installation and water conditioning servicing only while under the direct supervision of a master plumber, journeyworker plumber, restricted master plumber, restricted journeyworker plumber, water conditioning master, or water conditioning journeyworker. The master or journeyworker is responsible for ensuring that all water conditioning work performed by the plumber's apprentice complies with the plumbing code and rules adopted under sections 326B.50 to 326B.59. The supervising master or journeyworker must be licensed and must be employed by the same employer as the plumber's apprentice. Licensed individuals shall not permit plumber's apprentices to perform water conditioning work except under the direct supervision of an individual actually licensed to perform such work. Plumber's apprentices shall not supervise the performance of plumbing work or make assignments of plumbing work to unlicensed individuals.

(b) Water conditioning contractors employing plumber's apprentices to perform water conditioning work shall maintain records establishing compliance with this subdivision that shall identify all plumber's apprentices performing water conditioning work, and shall permit the department to examine and copy all such records.

History:

1969 c 898 s 4; 1973 c 123 art 5 s 7; 1974 c 471 s 16; 1977 c 305 s 45; 1980 c 487 s 11; 1985 c 248 s 70; 1986 c 444; 2007 c 140 art 7 s 4,13; art 13 s 4; 2010 c 183 s 13; 2010 c 347 art 3 s 39,76; 2010 c 385 s 6; 2017 c 68 art 1 s 26; c 94 art 2 s 12,13; 1Sp2017 c 7 s 8

326B.555 REGISTERED UNLICENSED INDIVIDUALS.

Subdivision 1.Registration; supervision; records.

(a) All unlicensed individuals engaged in water conditioning installation must be registered under subdivision 3.

(b) A registered unlicensed individual is authorized to assist in water conditioning installations in a single family residential unit only when a master plumber, journeyworker plumber, restricted master plumber, restricted journeyworker plumber, water conditioning master, or water conditioning journeyworker is available and responsible for ensuring that all water conditioning installation work performed by the unlicensed individual complies with the applicable provisions of the plumbing and water conditioning codes and rules adopted pursuant to such codes. For all other water conditioning installation work, the registered unlicensed individual must be under the direct supervision of a responsible licensed water conditioning master.

(c) Water conditioning contractors employing registered unlicensed individuals to perform water conditioning installation work shall maintain records establishing compliance with this subdivision that shall identify all unlicensed individuals performing water conditioning installations, and shall permit the department to examine and copy all such records.

Subd. 2.Journeyworker exam.

A registered unlicensed individual who has completed 875 hours of practical water conditioning installation, servicing, and training is eligible to take the water conditioning journeyworker examination. Up to 100 hours of practical water conditioning installation and servicing experience prior to becoming a registered unlicensed individual may be applied to the practical experience requirement. However, none of this practical experience may be applied if the unlicensed individual did not have any practical experience in the 12-month period immediately prior to becoming a registered unlicensed individual.

Subd. 3.Registration, renewals, and fees.

An unlicensed individual may register by completing and submitting to the commissioner an application form provided by the commissioner, with all fees required by section 326B.58. A completed application form must state the date, the individual's age, schooling, previous experience and employer, and other information required by the commissioner. The plumbing board may prescribe rules, not inconsistent with this section, for the registration of unlicensed individuals. Applications for initial registration may be submitted at any time. Registration must be renewed annually and shall be for the period from July 1 of each year to June 30 of the following year.

History:

2017 c 68 art 1 s 26; c 94 art 2 s 14; 1Sp2017 c 7 s 8

326B.56 BONDING AND INSURANCE.

Subdivision 1.Bonds.

(a) As a condition of licensing, each water conditioning contractor shall give and maintain a bond to the state as described in paragraph (b). No applicant for a water conditioning contractor license who maintains the bond under paragraph (b) shall be otherwise required to meet the bond requirements of any political subdivision.

(b) Each bond given to the state under this subdivision shall be in the penal sum of $3,000 and must comply with section 326B.0921.

Subd. 2.Insurance.

(a) As a condition of licensing, each water conditioning contractor shall have and maintain in effect the insurance described in paragraph (b). No applicant for a water conditioning contractor license who maintains the insurance described in paragraph (b) shall be otherwise required to meet the insurance requirements of any political subdivision.

(b) The insurance shall provide coverage, including products liability coverage, for all damages in connection with licensed work for which the licensee is liable, with personal damage limits of at least $50,000 per person and $100,000 per occurrence and property damage insurance with limits of at least $10,000. The insurance shall be written by an insurer licensed to do business in this state and a certificate evidencing the insurance shall be filed with the commissioner. The insurance must remain in effect at all times while the application is pending and while the license is in effect. In the event of a policy cancellation, the insurer shall send written notice to the commissioner at the same time that a cancellation request is received from or a notice is sent to the insured.

Subd. 3.

[Repealed, 2010 c 347 art 3 s 75]

Subd. 4.

[Repealed, 2010 c 347 art 3 s 75]

History:

1980 c 614 s 134; 1986 c 444; 2007 c 140 art 7 s 5,13; art 13 s 4; 2009 c 78 art 5 s 18; 2010 c 347 art 3 s 40,76; 2010 c 384 s 89; 2010 c 385 s 6; 1Sp2011 c 4 art 3 s 25; 2015 c 54 art 1 s 17

326B.57 RULES.

In order to provide effective protection of the public health, the Plumbing Board may by rule prescribe limitations on the nature of alteration to, extension of, or connection with, the said water distribution system initially established by a licensed plumber which may be performed by a person licensed hereunder. The commissioner may by rule in appropriate instances require filing of plans, blueprints and specifications prior to commencement of installation. The installation of water heaters shall not constitute water conditioning installation and consequently such work shall be accomplished in accordance with the provisions of sections 326B.42 to 326B.49.

History:

1969 c 898 s 5; 1977 c 305 s 45; 1985 c 248 s 70; 1989 c 209 art 2 s 1; 2007 c 140 art 7 s 6-9,12,13; art 13 s 4; 2010 c 183 s 14

326B.58 FEES; RENEWAL.

(a) Each initial water conditioning master and water conditioning journeyworker license shall be effective for more than one calendar year and shall expire on December 31 of the year after the year in which the application is made.

(b) The commissioner shall in a manner determined by the commissioner, without the need for any rulemaking under chapter 14, phase in the renewal of water conditioning master and journeyworker licenses from one year to two years. By June 30, 2011, all renewed water conditioning contractor licenses shall be two-year licenses. The Plumbing Board may by rule prescribe for the expiration and renewal of licenses.

(c) All water conditioning contractor licenses shall expire on December 31 of the year after issuance or renewal.

(d) For purposes of calculating license fees and renewal fees required under section 326B.092:

(1) a water conditioning journeyworker license shall be considered a journeyworker license;

(2) a water conditioning master license shall be considered a master license; and

(3) a water conditioning contractor license shall be considered a business license.

History:

1969 c 898 s 6; 1974 c 471 s 17; 1975 c 310 s 32; 1977 c 305 s 45; 2007 c 140 art 7 s 10,13; art 13 s 4; 2008 c 337 s 35; 2009 c 78 art 5 s 19; 2010 c 183 s 15; 2010 c 347 art 3 s 41,76; 2010 c 385 s 6; 1Sp2011 c 4 art 3 s 26; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

326B.59 STATE LICENSE; EXAMINATION; APPLICATION; EXEMPTION.

The provisions of sections 326B.50 to 326B.58 that require licenses to engage in the work or business of water conditioning installation, and the provisions that provide for the examination of applicants for such licenses, do not apply to master plumbers and journeyworker plumbers licensed under the provisions of sections 326B.42 to 326B.49. In all areas of the state except in cities or towns with a population of more than 5,000 according to the last federal census, the provisions of sections 326B.50 to 326B.58 that require licenses to engage in the work or business of water conditioning installation, and the provisions that provide for the examination of applicants for such licenses, do not apply to restricted master plumbers and restricted journeyworker plumbers licensed under the provisions of section 326B.475.

History:

1969 c 898 s 9; 1973 c 123 art 5 s 7; 1989 c 209 art 2 s 1; 2007 c 140 art 7 s 11,13; art 13 s 4; 2010 c 183 s 16; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8

CONSTRUCTION CONTRACTORS

326B.701 CONSTRUCTION CONTRACTOR REGISTRATION.

Subdivision 1.Definitions.

The following definitions apply to this section:

(a) "Business entity" means a person other than an individual or a sole proprietor.

(b) "Document" or "documents" includes papers; books; records; memoranda; data; contracts; drawings; graphs; charts; photographs; digital, video, and audio recordings; records; accounts; files; statements; letters; e-mails; invoices; bills; notes; and calendars maintained in any form or manner.

Subd. 2.Applicability; registration requirement.

(a) Persons who perform public or private sector commercial or residential building construction or improvement services as described in subdivision 2 must register with the commissioner as provided in this section. The purpose of registration is to assist the Department of Labor and Industry, the Department of Employment and Economic Development, and the Department of Revenue to enforce laws related to misclassification of employees.

(b) Except as provided in paragraph (c), any person who performs construction services in the state on or after September 15, 2012, must register with the commissioner as provided in this section before performing construction services for another person. The requirements for registration under this section are not a substitute for, and do not relieve a person from complying with, any other law requiring that the person be licensed, registered, or certified.

(c) The registration requirements in this section do not apply to:

(1) a person who, at the time the person is performing the construction services, holds a current license, certificate, or registration under chapter 299M or 326B;

(2) a person who holds a current independent contractor exemption certificate issued under this section that is in effect on September 15, 2012, except that the person must register under this section no later than the date the exemption certificate expires, is revoked, or is canceled;

(3) a person who has given a bond to the state under section 326B.197 or 326B.46;

(4) an employee of the person performing the construction services, if the person was in compliance with laws related to employment of the individual at the time the construction services were performed;

(5) an architect or professional engineer engaging in professional practice as defined in section 326.02, subdivisions 2 and 3;

(6) a school district or technical college governed under chapter 136F;

(7) a person providing construction services on a volunteer basis, including but not limited to Habitat for Humanity and Builders Outreach Foundation, and their individual volunteers when engaged in activities on their behalf; or

(8) a person exempt from licensing under section 326B.805, subdivision 6, clause (5).

Subd. 3.Registration application.

(a) Persons required to register under this section must submit electronically, in the manner prescribed by the commissioner, a complete application according to paragraphs (b) to (d).

(b) A complete application must include all of the following information about any individual who is registering as an individual or a sole proprietor, or who owns 25 percent or more of a business entity being registered:

(1) the individual's full legal name and title at the applicant's business;

(2) the individual's business address and telephone number;

(3) the percentage of the applicant's business owned by the individual; and

(4) the individual's Social Security number.

(c) A complete application must also include the following information:

(1) the applicant's legal name; assumed name filed with the secretary of state, if any; designated business address; physical address; telephone number; and e-mail address;

(2) the applicant's Minnesota tax identification number, if one is required or has been issued;

(3) the applicant's federal employer identification number, if one is required or has been issued;

(4) evidence of the active status of the applicant's business filings with the secretary of state, if one is required or has been issued;

(5) whether the applicant has any employees at the time the application is filed;

(6) the names of all other persons with an ownership interest in the business entity who are not identified in paragraph (b), and the percentage of the interest owned by each person, except that the names of shareholders with less than ten percent ownership in a publicly traded corporation need not be provided;

(7) information documenting compliance with workers' compensation and unemployment insurance laws;

(8) a certification that the person signing the application has: reviewed it; determined that the information provided is true and accurate; and determined that the person signing is authorized to sign and file the application as an agent of the applicant. The name of the person signing, entered on an electronic application, shall constitute a valid signature of the agent on behalf of the applicant; and

(9) a signed authorization for the Department of Labor and Industry to verify the information provided on or with the application.

(d) A registered person must notify the commissioner within 15 days after there is a change in any of the information on the application as approved. This notification must be provided electronically in the manner prescribed by the commissioner. However, if the business entity structure or legal form of the business entity has changed, the person must submit a new registration application and registration fee, if any, for the new business entity.

(e) The registered person must remain registered while providing construction services for another person. The provisions of sections 326B.091, 326B.094, 326B.095, and 326B.097 apply to this section. A person with an expired registration shall not provide construction services for another person if registration is required under this section. Registration application and expiration time frames are as follows:

(1) all registrations issued on or before December 31, 2015, expire on December 31, 2015;

(2) all registrations issued after December 31, 2015, expire on the following December 31 of each odd-numbered year; and

(3) a person may submit a registration or renewal application starting October 1 of the year the registration expires. If a renewal application is submitted later than December 1 of the expiration year, registration may expire before the department has issued or denied the registration.

Subd. 4.Website.

(a) The commissioner shall develop and maintain a website on which applicants for registration can submit a registration application. The website shall be designed to receive and process registration applications and promptly issue registration certificates electronically to successful applicants.

(b) The commissioner shall maintain the certificates of registration on the department's official public website, which shall include the following information:

(1) the registered person's legal business name, including any assumed name, as filed with the secretary of state;

(2) the person's business address designated on the application; and

(3) the effective date of the registration and the expiration date.

Subd. 5.Prohibited activities related to registration.

(a) The prohibited activities in this subdivision are in addition to those prohibited in sections 326B.081 to 326B.085.

(b) A person who provides construction services in the course of the person's trade, business, occupation, or profession shall not:

(1) contract with or perform construction services for another person without first being registered if required by this section;

(2) contract with or pay another person to perform construction services if the other person is not registered if required by subdivision 2. All payments to an unregistered person for construction services on a single project site shall be considered a single violation. It is not a violation of this clause:

(i) for a person to contract with or pay an unregistered person if the unregistered person was registered at the time the contract for construction services was entered into; or

(ii) for a homeowner or business to contract with or pay an unregistered person if the homeowner or business is not in the trade, business, profession, or occupation of performing building construction or improvement services; or

(3) be penalized for violations of this subdivision that are committed by another person. This clause applies only to violations of this paragraph.

Subd. 6.Enforcement; remedies; and penalties.

(a) Notwithstanding the maximum penalty amount in section 326B.082, subdivisions 7 and 12, the maximum penalty for failure to register is $2,000, but the commissioner shall forgive the penalty if the person registers within 30 days of the date of the penalty order.

(b) The penalty for contracting with or paying an unregistered person to perform construction services in violation of subdivision 5, paragraph (b), clause (2), shall be as provided in section 326B.082, subdivisions 7 and 12, but the commissioner shall forgive the penalty for the first violation.

Subd. 7.Notice requirement.

Notice of a penalty order for failure to register must include a statement that the penalty shall be forgiven if the person registers within 30 days of the date of the penalty order.

Subd. 8.Data classified.

Data in applications and any required documentation submitted to the commissioner under this section are private data on individuals or nonpublic data as defined in section 13.02. Data in registration certificates issued by the commissioner are public data; except that registration information published on the department's website may be accessed for registration verification purposes only. Data that document a revocation or cancellation of a certificate are public data. Upon request of the Department of Revenue or the Department of Employment and Economic Development, the commissioner may release to the requesting department data classified as private or nonpublic under this subdivision or investigative data that are not public under section 13.39 that relate to the issuance or denial of applications or revocations of certificates.

History:

2007 c 135 art 3 s 15; 2010 c 347 art 3 s 1; 1Sp2011 c 4 art 3 s 1; 2012 c 295 art 2 s 3,4,5,7,10; 2014 c 305 s 14,15,17,26,31; 2015 c 54 art 1 s 18

RESIDENTIAL TRADES; LICENSING

326B.801 SCOPE.

Except as otherwise provided by law, sections 326B.801 to 326B.885 apply to residential contractors, residential remodelers, residential roofers, and manufactured home installers.

History:

2007 c 140 art 8 s 24; 2010 c 183 s 17

326B.802 DEFINITIONS.

Subdivision 1.Applicability.

The definitions in this section apply to sections 326B.802 to 326B.885.

Subd. 2.Affiliate.

An "affiliate" of another person means any person directly or indirectly controlling, controlled by, or under common control with the other person.

Subd. 3.Gross annual receipts.

"Gross annual receipts" means the total amount derived from residential contracting or remodeling activities, regardless of where the activities are performed, and must not be reduced by cost of goods sold, expenses, losses, or any other amount.

Subd. 4.Lessee.

"Lessee" means one who rents or leases residential real estate pursuant to a written lease agreement of at least one year's duration.

Subd. 5.Licensee.

"Licensee" means a residential building contractor, residential remodeler, manufactured home installer, or residential roofer licensed under sections 326B.802 to 326B.885.

Subd. 6.Manufactured home.

"Manufactured home" has the meaning given it in section 327.31, subdivision 6.

Subd. 7.Manufactured home installer.

"Manufactured home installer" has the meaning given it in section 327.31, subdivision 11.

Subd. 8.Mechanical contractor.

"Mechanical contractor" means a person, sole proprietor, partnership, joint venture, corporation, or other organization which is in the business of erection, installation, alteration, repair, relocation, replacement, addition to, use, or maintenance of any heating, ventilating, cooling, process piping, plumbing, fire protection, or refrigeration systems, incinerators, or other miscellaneous heat-producing appliance, piping, or equipment or appliances associated with those systems.

Subd. 9.Owner.

"Owner," when used in connection with real property, means a person who has any legal or equitable interest in the real property.

Subd. 10.Qualifying person.

"Qualifying person" means the individual who fulfills the examination and education requirements for licensure on behalf of the licensee.

Subd. 11.Residential building contractor.

"Residential building contractor" means a person in the business of building residential real estate, or of contracting or offering to contract with an owner to build residential real estate, by providing two or more special skills as defined in this section. A residential building contractor may also contract or offer to contract with an owner to improve existing residential real estate.

Subd. 12.Residential remodeler.

"Residential remodeler" means a person in the business of contracting or offering to contract with an owner to improve existing residential real estate by providing two or more special skills as defined in this section.

Subd. 13.Residential real estate.

"Residential real estate" means a new or existing building constructed for habitation by one to four families, and includes detached garages.

Subd. 14.Residential roofer.

"Residential roofer" means a person in the business of contracting, or offering to contract with an owner, to complete work on residential real estate in roof coverings, roof sheathing, roof weatherproofing and insulation, and repair of roof systems, but not construction of new roof systems.

Subd. 15.Special skill.

"Special skill" means one of the following eight categories:

(a) Excavation. Excavation includes work in any of the following areas:

(1) excavation;

(2) trenching;

(3) grading; and

(4) site grading.

(b) Masonry and concrete. Masonry and concrete includes work in any of the following areas:

(1) drain systems;

(2) poured walls;

(3) slabs and poured-in-place footings;

(4) masonry walls;

(5) masonry fireplaces;

(6) masonry veneer; and

(7) water resistance and waterproofing.

(c) Carpentry. Carpentry includes work in any of the following areas:

(1) rough framing;

(2) finish carpentry;

(3) doors, windows, and skylights;

(4) porches and decks, excluding footings;

(5) wood foundations; and

(6) drywall installation, excluding taping and finishing.

(d) Interior finishing. Interior finishing includes work in any of the following areas:

(1) floor covering;

(2) wood floors;

(3) cabinet and counter top installation;

(4) insulation and vapor barriers;

(5) interior or exterior painting;

(6) ceramic, marble, and quarry tile;

(7) ornamental guardrail and installation of prefabricated stairs; and

(8) wallpapering.

(e) Exterior finishing. Exterior finishing includes work in any of the following areas:

(1) siding;

(2) soffit, fascia, and trim;

(3) exterior plaster and stucco;

(4) painting; and

(5) rain carrying systems, including gutters and down spouts.

(f) Drywall and plaster. Drywall and plaster includes work in any of the following areas:

(1) installation;

(2) taping;

(3) finishing;

(4) interior plaster;

(5) painting; and

(6) wallpapering.

(g) Residential roofing. Residential roofing includes work in any of the following areas:

(1) roof coverings;

(2) roof sheathing;

(3) roof weatherproofing and insulation; and

(4) repair of roof support system, but not construction of new roof support system.

(h) General installation specialties. Installation includes work in any of the following areas:

(1) garage doors and openers;

(2) pools, spas, and hot tubs;

(3) fireplaces and wood stoves;

(4) asphalt paving and seal coating; and

(5) ornamental guardrail and prefabricated stairs.

Subd. 16.Specialty contractor.

"Specialty contractor" means a person in the business of contracting or offering to contract to build or improve residential real estate by providing only one special skill as defined in this section.

Subd. 17.Garage.

"Garage" means a structure attached to or in reasonable proximity to a dwelling, which is used or intended to be used primarily for the protection or storage of automobiles or other personal vehicles owned or driven by the occupants of the dwelling.

History:

1991 c 306 s 7; 1993 c 9 s 1-3; 1993 c 145 s 2-4; 1993 c 245 s 2-13; 1993 c 366 s 18; 1995 c 169 s 1,2; 1997 c 222 s 45,46; 1999 c 137 s 6; 2007 c 140 art 8 s 2-7,30; art 13 s 4

326B.805 LICENSING REQUIREMENTS.

Subdivision 1.Persons required to be licensed.

A person who meets the definition of a residential building contractor as defined in section 326B.802, subdivision 11, must be licensed as a residential building contractor by the commissioner. A person who meets the definition of a residential remodeler as defined in section 326B.802, subdivision 12, must be licensed by the commissioner as a residential remodeler or residential building contractor. A person who meets the definition of a residential roofer as defined in section 326B.802, subdivision 14, must be licensed by the commissioner as a residential roofer, residential building contractor, or residential remodeler. A person who meets the definition of a manufactured home installer as defined in section 327.31, subdivision 11, must be licensed as a manufactured home installer by the commissioner.

Subd. 1a.Pre-1978 structures.

A licensee performing renovation defined by Code of Federal Regulations, title 40, section 745.83, on a residential structure constructed prior to 1978 must comply with section 326B.106, subdivision 14.

Subd. 2.Persons who may be licensed.

A person who meets the definition of a specialty contractor as defined in section 326B.802, subdivision 16, may be licensed by the commissioner as a residential building contractor or residential remodeler.

Subd. 3.Prohibition.

Except as provided in subdivision 6, no persons required to be licensed by subdivision 1 may act or hold themselves out as a residential building contractor, residential remodeler, residential roofer, or manufactured home installer for compensation without a license issued by the commissioner.

Subd. 4.Licensing criteria.

The examination and education requirements for licensure under sections 326B.805 to 326B.885 must be fulfilled by a qualifying person designated by the potential licensee. If the qualifying person is a managing employee, the qualifying person must be an employee who is regularly employed by the licensee and is actively engaged in the business of residential contracting or residential remodeling on behalf of the licensee. For a sole proprietorship, the qualifying person must be the proprietor or managing employee. For a partnership, the qualifying person must be a general partner or managing employee. For a limited liability company, the qualifying person must be a chief manager or managing employee. For a corporation, the qualifying person must be an owner, officer, or managing employee. A qualifying person for a corporation or limited liability company may act as the qualifying person for more than one corporation or limited liability company if there is common ownership of at least 25 percent among each of the licensed corporations or limited liability companies for which the person acts in the capacity of qualifying person.

Subd. 5.Required information.

(a) Each licensee or applicant for licensure shall provide to the commissioner a current street address and telephone number where the licensee resides, and a street address and telephone number where the licensee's business is physically located. A post office box address is not sufficient to satisfy this requirement. Each licensee or applicant for licensure must notify the commissioner in writing of any change in the required information within 15 days of the change.

(b) Each licensee or applicant for licensure must notify the commissioner in writing upon any change in control, ownership, officers or directors, personal name, business name, license name, or qualifying person, within 15 days of the change.

(c) Each licensee or applicant for licensure must notify the commissioner in writing if the licensee or applicant for licensure is found to be a judgment debtor based upon conduct requiring licensure pursuant to sections 326B.802 to 326B.885 within 15 days of the finding.

(d) Each licensee or applicant for licensure must notify the commissioner in writing within 15 days of filing a petition for bankruptcy.

(e) Each licensee or applicant for licensure must notify the commissioner in writing within ten days if the licensee or applicant for licensure has been found guilty of a felony, gross misdemeanor, misdemeanor, or any comparable offense related to residential contracting, including convictions of fraud, misrepresentation, misuse of funds, theft, criminal sexual conduct, assault, burglary, conversion of funds, or theft of proceeds in this or any other state or any other United States jurisdiction.

Subd. 6.Exemptions.

The license requirement does not apply to:

(1) an employee of a licensee performing work for the licensee;

(2) a material person, manufacturer, or retailer furnishing finished products, materials, or articles of merchandise who does not install or attach the items;

(3) an owner of residential real estate who builds or improves any structure on residential real estate, if the building or improving is performed by the owner's bona fide employees or by individual owners personally. This exemption does not apply to an owner who constructs or improves property for purposes of speculation if the building or improving is performed by the owner's bona fide employees or by individual owners personally. A residential building contractor or residential remodeler will be presumed to be building or improving for purposes of speculation if the contractor or remodeler constructs or improves more than one property within any 24-month period;

(4) an architect or professional engineer engaging in professional practice as defined by section 326.02, subdivisions 2 and 3;

(5) a person whose total gross annual receipts for performing specialty skills for which licensure would be required under this section do not exceed $15,000;

(6) a mechanical contractor;

(7) a plumber, electrician, or other person whose profession is otherwise subject to statewide licensing, when engaged in the activity which is the subject of that licensure;

(8) specialty contractors who provide only one special skill as defined in section 326B.802;

(9) a school district, or a technical college governed under chapter 136F; and

(10) Habitat for Humanity and Builders Outreach Foundation, and their individual volunteers when engaged in activities on their behalf.

To qualify for the exemption in clause (5), a person must obtain a certificate of exemption from licensure from the commissioner. A certificate of exemption will be issued upon the applicant's filing with the commissioner, an affidavit stating that the applicant does not expect to exceed $15,000 in gross annual receipts derived from performing services which require licensure under this section during the calendar year in which the affidavit is received. For the purposes of calculating fees under section 326B.092, a certificate of exemption is an entry level license. To renew the exemption in clause (5), the applicant must file an affidavit stating that the applicant did not exceed $15,000 in gross annual receipts during the past calendar year. If a person, operating under the exemption in clause (5), exceeds $15,000 in gross receipts during any calendar year, the person must immediately surrender the certificate of exemption and apply for the appropriate license. The person must remain licensed until such time as the person's gross annual receipts during a calendar year fall below $15,000. The person may then apply for an exemption for the next calendar year.

History:

1991 c 306 s 8; 1993 c 245 s 14,15; 1995 c 169 s 3; 1996 c 395 s 18; 1997 c 222 s 47; 2007 c 140 art 8 s 8,30; art 13 s 4; 2008 c 337 s 36; 2010 c 321 s 3; 2010 c 347 art 3 s 42,76; 2010 c 385 s 6; 2011 c 2 s 3

326B.809 WRITTEN CONTRACT REQUIRED.

(a) All agreements including proposals, estimates, bids, quotations, contracts, purchase orders, and change orders between a licensee and a customer for the performance of a licensee's services must be in writing and must contain the following:

(1) a detailed summary of the services to be performed;

(2) a description of the specific materials to be used or a list of standard features to be included; and

(3) the total contract price or a description of the basis on which the price will be calculated.

(b) Before entering into an agreement, the licensee shall provide a prospective customer with written performance guidelines for the services to be performed. Performance guidelines also must be included or incorporated by reference in the agreement. All agreements shall be signed and dated by the licensee and customer.

(c) The licensee shall provide to the customer, at no charge, a signed and dated document at the time that the licensee and customer sign and date the document. Documents include agreements, performance guidelines, and mechanic's lien waivers.

History:

2007 c 140 art 8 s 25; 2010 c 343 s 3

326B.81 RESIDENTIAL ROOFERS.

Residential roofers are subject to all of the requirements of sections 326B.802 to 326B.885, except the recovery fund in section 326B.89.

History:

1993 c 145 s 5; 1993 c 366 s 19; 2007 c 140 art 8 s 10,30; art 13 s 4

326B.811 RESIDENTIAL ROOFING CONTRACT; RIGHT TO CANCEL.

Subdivision 1.Required.

A person who has entered into a written contract with a residential building contractor, residential remodeler, or residential roofer to provide goods and services to be paid by the insured from the proceeds of a property or casualty insurance policy has the right to cancel the contract within 72 hours after the insured has been notified by the insurer that the claim has been denied. Cancellation is evidenced by the insured giving written notice of cancellation to the contractor at the address stated in the contract. Notice of cancellation, if given by mail, is effective upon deposit in a mailbox, properly addressed to the contractor and postage prepaid. Notice of cancellation need not take a particular form and is sufficient if it indicates, by any form of written expression, the intention of the insured not to be bound by the contract.

Subd. 2.Writing required; notice of right to cancel; notice of cancellation.

(a) Before entering a contract referred to in subdivision 1, the contractor must:

(1) furnish the insured with a statement in boldface type of a minimum size of ten points, in substantially the following form:

"You may cancel this contract at any time within 72 hours after you have been notified that your insurer has denied your claim to pay for the goods and services to be provided under this contract. See attached notice of cancellation form for an explanation of this right."; and

(2) furnish each insured a fully completed form in duplicate, captioned "NOTICE OF CANCELLATION," which shall be attached to the contract and easily detachable, and which shall contain in boldface type of a minimum size of ten points the following information and statements:

"NOTICE OF CANCELLATION

If your insurer denies your claim to pay for goods and services to be provided under this contract, you may cancel the contract by mailing or delivering a signed and dated copy of this cancellation notice or any other written notice to (name of contractor) at (address of contractor's place of business) at any time within 72 hours after you have been notified that your claim has been denied. If you cancel, any payments made by you under the contract will be returned within ten business days following receipt by the contractor of your cancellation notice.

	I HEREBY CANCEL THIS TRANSACTION.
	.
	(date)
	.
	(Insured's signature)"

Subd. 3.Return of payments; compensation.

Within ten days after a contract referred to in subdivision 1 has been canceled, the contractor must tender to the insured any payments made by the insured and any note or other evidence of indebtedness. However, if the contractor has performed any emergency services, the contractor is entitled to compensation for such services.

Subd. 4.Definition.

For the purposes of this section, "contractor" means a residential building contractor who is providing roofing services, a residential remodeler who is providing roofing services, or a residential roofer.

History:

2010 c 324 s 2; 2011 c 63 s 2; 2015 c 54 art 1 s 19

326B.814 REHABILITATION OF CRIMINAL OFFENDERS.

Chapter 364 does not apply to an applicant for a license or to a licensee where the underlying conduct on which the conviction is based would be grounds for denial, censure, suspension, or revocation of the license.

History:

2007 c 140 art 8 s 26

326B.815 FEES.

Subdivision 1.Fees.

(a) For the purposes of calculating fees under section 326B.092, an initial or renewed residential contractor, residential remodeler, or residential roofer license is a business license. Notwithstanding section 326B.092, the licensing fee for manufactured home installers under section 327B.041 is $180 for a three-year period.

(b) All initial and renewal licenses, except for manufactured home installer licenses, shall be effective for two years and shall expire on March 31 of the year after the year in which the application is made.

(c) The commissioner shall in a manner determined by the commissioner, without the need for any rulemaking under chapter 14, phase in the renewal of residential contractor, residential remodeler, and residential roofer licenses from one year to two years. By June 30, 2011, all renewed residential contractor, residential remodeler, and residential roofer licenses shall be two-year licenses.

Subd. 2.Local surcharge.

A local government unit may place a surcharge in an amount no greater than $5 on each land use, zoning, or building permit that requires a licensed residential building contractor, residential remodeler, residential roofer, or manufactured home installer for the purpose of license verification. The local government may verify a license by telephone, facsimile or electronic communication. A local government unit shall not issue a land use, zoning, or building permit unless the required license has been verified and is current.

History:

1991 c 306 s 10; 1993 c 245 s 17; 1996 c 305 art 3 s 34; 1997 c 200 art 1 s 72; 1999 c 223 art 2 s 46; 1999 c 250 art 3 s 28; 2007 c 140 art 8 s 11,30; art 13 s 4; 2008 c 337 s 37; 2009 c 78 art 5 s 20; 2010 c 347 art 3 s 43,76; 2010 c 385 s 6; 1Sp2019 c 1 art 6 s 2

326B.82

Subdivision 1.

[Repealed, 2012 c 187 art 1 s 75]

Subd. 2.

MS 2010 [Renumbered 326B.091, subd 2a]

Subd. 3.

MS 2010 [Renumbered 326B.091, subd 2b]

Subd. 4.

[Repealed, 1Sp2011 c 4 art 3 s 59]

Subd. 5.

MS 2010 [Renumbered 326B.091, subd 2c]

Subd. 6.

[Repealed, 1Sp2011 c 4 art 3 s 59]

Subd. 7.

MS 2010 [Renumbered 326B.091, subd 4a]

Subd. 8.

MS 2010 [Renumbered 326B.091, subd 5a]

Subd. 9.

MS 2010 [Renumbered 326B.091, subd 5c]

Subd. 10.

MS 2010 [Renumbered 326B.091, subd 7]

326B.821 CONTINUING EDUCATION; HOURS.

Subdivision 1.Purpose.

The purpose of this section is to establish standards for residential building contractor continuing education.

Subd. 2.Hours.

A qualifying person of a licensee must provide proof of completion of 14 hours of continuing education per two-year licensure period.

Credit may not be earned if the licensee has previously obtained credit for the same course as either a student or instructor during the same licensing period.

Subd. 3.

[Repealed, 1Sp2011 c 4 art 3 s 59]

Subd. 4.

MS 2010 [Renumbered 326B.0981, subd 17]

Subd. 5.

MS 2010 [Renumbered 326B.0981, subd 3]

Subd. 5a.

MS 2010 [Renumbered 326B.0981, subd 4]

Subd. 6.

MS 2010 [Renumbered 326B.0981, subd 5]

Subd. 7.

MS 2010 [Renumbered 326B.0981, subd 6]

Subd. 8.

MS 2010 [Renumbered 326B.099, subd 1]

Subd. 9.

MS 2010 [Renumbered 326B.099, subd 2]

Subd. 10.

MS 2010 [Renumbered 326B.099, subd 3]

Subd. 11.

MS 2010 [Renumbered 326B.099, subd 4]

Subd. 12.

MS 2010 [Renumbered 326B.0981, subd 7]

Subd. 13.

MS 2010 [Renumbered 326B.0981, subd 8]

Subd. 14.

MS 2010 [Renumbered 326B.0981, subd 9]

Subd. 15.

MS 2010 [Renumbered 326B.0981, subd 10]

Subd. 16.

MS 2010 [Renumbered 326B.0981, subd 11]

Subd. 17.

MS 2010 [Renumbered 326B.099, subd 5]

Subd. 18.

MS 2010 [Renumbered 326B.0981, subd 12]

Subd. 19.

MS 2010 [Renumbered 326B.0981, subd 13]

Subd. 20.

MS 2010 [Renumbered 326B.0981, subd 14]

Subd. 21.Residential building contractor, remodeler, and roofer education.

(a) Each licensee must, during each continuing education reporting period, complete and report one hour of continuing education relating to energy codes or energy conservation measures applicable to residential buildings and one hour of business management strategies applicable to residential construction businesses.

(b) Immediately following the adoption date of a new residential code, the commissioner may prescribe that up to seven of the required 14 hours of continuing education credit per licensure period include education hours specifically designated to instruct licensees on new or existing State Building Code provisions.

Subd. 22.

MS 2010 [Renumbered 326B.0981, subd 2]

Subd. 23.

MS 2010 [Renumbered 326B.0981, subd 15]

Subd. 24.

MS 2010 [Renumbered 326B.0981, subd 16]

History:

1991 c 306 s 11; 1992 c 522 s 23; 1992 c 595 s 25; 1992 c 597 s 17; 1993 c 245 s 18; 1996 c 439 art 4 s 2; 2007 c 140 art 8 s 12,30; art 13 s 4; 2008 c 322 s 6; 2008 c 337 s 38; 2009 c 78 art 5 s 21; 2010 c 260 s 1; 1Sp2011 c 4 art 3 s 31-47,58; 1Sp2019 c 7 art 9 s 11

326B.825 LOSS OF QUALIFYING PERSON.

Upon the departure or disqualification of a licensee's qualifying person because of death, disability, retirement, position change, or other reason, the licensee must notify the commissioner within 15 business days. The licensee shall have 120 days from the departure of the qualifying person to obtain a new qualifying person. Failure to secure a new qualifying person within 120 days will, with or without notice, result in the automatic termination of the license.

History:

1991 c 306 s 12; 1993 c 245 s 20; 2007 c 140 art 8 s 13,30; art 13 s 4

326B.83 APPLICATION AND EXAMINATION.

Subdivision 1.Form.

(a) An applicant for a license under sections 326B.802 to 326B.885 must submit an application, under oath and accompanied by the fees required by section 326B.092, on a form prescribed by the commissioner.

(b) If one of the categories in the application does not apply, the applicant must identify the category and state the reason the category does not apply. The commissioner may refuse to issue a license if the application is not complete or contains unsatisfactory information.

Subd. 2.Contents.

Each application must include the following information regarding the applicant:

(1) Minnesota workers' compensation insurance certificate;

(2) employment insurance account number;

(3) certificate of liability insurance;

(4) type of license requested;

(5) name, current address, and telephone number where the applicant resides;

(6) name and address of the applicant's qualifying person, if other than applicant;

(7) if the applicant is a sole proprietorship, the name and address of the sole proprietor; if the applicant is a partnership, the name and address of each partner; if the applicant is a limited liability company, the name and address of each governor and manager; if the applicant is a corporation, the name and address of each of the corporate officers, directors, and all shareholders holding more than ten percent of the outstanding stock in the corporation;

(8) name and address of the applicant's agent in this state authorized to receive service of process, and a consent to service of process as required by section 326B.855;

(9) current street address and telephone number where the business is physically located;

(10) whether the applicant, any employee, or qualifying person has ever been licensed in this or any other state and has had a professional or vocational license reprimanded, censured, limited, conditioned, refused, suspended, or revoked, or has been the subject of any administrative action;

(11) whether the applicant, qualifying person, or any of the applicant's corporate or partnership directors, limited liability company governors, officers, limited or general partners, managers, all shareholders holding more than ten percent of the share of the corporation that have been issued, or all members holding more than ten percent of the voting power of the membership interests that have been issued, has been convicted of a crime that either related directly to the business for which the license is sought or involved fraud, misrepresentation, or misuse of funds; has suffered a judgment in a civil action involving fraud, misrepresentation, construction defect, negligence, breach of contract, or conversion of funds within the ten years prior to the submission of the application; or has had any government license or permit reprimanded, censured, limited, conditioned, suspended, or revoked as a result of an action brought by a federal, state, or local governmental unit or agency in this or any other state;

(12) the applicant's and qualifying person's business history for the past five years and whether the applicant, a managing employee, or qualifying person has ever filed for bankruptcy or protection from creditors or has any unsatisfied judgments against the applicant, employee, or qualifying person;

(13) where the applicant is a firm, partnership, sole proprietorship, limited liability company, corporation, or association, whether there has been a sale or transfer of the business or other change in ownership, control, or name in the last five years and the details thereof, and the names and addresses of all prior, predecessor, subsidiary, affiliated, parent, or related entities, and whether each such entity, or its owners, officers, directors, members or shareholders holding more than ten percent of the stock, or an employee has ever taken or been subject to an action that is subject to clause (10), (11), or (12) in the last ten years; and

(14) whether the qualifying person is the qualifying person for more than one licensee.

For purposes of this subdivision, "applicant" includes employees who exercise management or policy control over the residential contracting, residential remodeling, residential roofing, or manufactured home installation activities in the state of Minnesota, including affiliates, partners, directors, governors, officers, limited or general partners, managers, all shareholders holding more than ten percent of the shares that have been issued, a shareholder holding more than ten percent of the voting power of the shares that have been issued, or all members holding more than ten percent of the membership interests that have been issued or more than ten percent of the voting power of the membership interests that have been issued.

The commissioner may require further information as the commissioner deems appropriate to administer the provisions and further the purposes of this chapter.

Subd. 3.Examination.

(a) Each qualifying person must pass a written examination for the type of license requested. The commissioner may establish the examination qualifications, including related education experience and education, the examination procedure, and the examination for each licensing group. The examination must include at a minimum the following areas:

(1) appropriate knowledge of technical terms commonly used and the knowledge of reference materials and code books to be used for technical information; and

(2) understanding of the general principles of business management and other pertinent state laws.

(b) Each examination must be designed for the specified type of license requested.

Subd. 4.Exemption.

A general retailer whose primary business is not being a residential building contractor, residential remodeler, residential roofer, or manufactured home installer, and who has completed a license examination meeting or exceeding Minnesota's examination requirements in another state is exempt from subdivision 3 and sections 326B.0981, 326B.099, 326B.821, and 326B.825.

Subd. 5.Additional licensing requirements.

As an alternative to denying an application for licensure pursuant to section 326B.84, the commissioner may, as a condition of licensure and based upon information received pursuant to subdivision 2, clauses (10) to (12), or a finding pursuant to section 326B.84, clauses (1) to (9), impose additional insurance, bonding, reporting, record keeping, and other requirements on the applicant as are reasonable to protect the public.

Subd. 6.License.

A nonresident of Minnesota may be licensed as a residential building contractor, residential remodeler, residential roofer, or manufactured home installer upon compliance with all the provisions of sections 326B.092 to 326B.098 and 326B.802 to 326B.885.

History:

1991 c 306 s 13; 1993 c 245 s 21-24; 1999 c 137 s 7; 2007 c 140 art 8 s 14,30; art 13 s 4; 2010 c 347 art 3 s 44-46,76; 2010 c 385 s 6; 1Sp2011 c 4 art 3 s 58

326B.835 LOCAL LICENSES.

Subdivision 1.Local license prohibited.

Except as provided in subdivision 2, a political subdivision may not require a person licensed under sections 326B.802 to 326B.885 to also be licensed or pay a registration or other fee related to licensure under any ordinance, law, rule, or regulation of the political subdivision. This section does not prohibit charges for building permits or other charges not directly related to licensure.

Subd. 2.Exception.

This section does not prohibit a political subdivision from requiring licensure or certification under any ordinance, law, rule, or regulation of the political subdivision for persons who engage in the installation of an on-site sewage treatment system.

History:

1991 c 306 s 14; 1993 c 245 s 25; 2001 c 207 s 7; 2007 c 140 art 8 s 15,30; art 13 s 4

326B.84 GROUNDS FOR SANCTIONS.

The commissioner may use any enforcement provision in section 326B.082 against an applicant for, qualifying person of, or holder of a license or certificate of exemption, or any individual or entity who is required by law to hold a license or certificate of exemption, if the individual, entity, applicant, licensee, certificate of exemption holder, qualifying person, or owner, officer, member, managing employee, or affiliate of the applicant, licensee, or certificate of exemption holder:

(1) has filed an application for licensure or a certificate of exemption which is incomplete in any material respect or contains any statement which, in light of the circumstances under which it is made, is false or misleading with respect to any material fact;

(2) has engaged in a fraudulent, deceptive, or dishonest practice;

(3) is permanently or temporarily enjoined by any court of competent jurisdiction from engaging in or continuing any conduct or practice involving any aspect of the business;

(4) has failed to reasonably supervise employees, agents, subcontractors, or salespersons, or has performed negligently or in breach of contract, so as to cause injury or harm to the public;

(5) has violated or failed to comply with any provision of sections 326B.802 to 326B.885, any rule or order under sections 326B.802 to 326B.885, or any other law, rule, or order related to the duties and responsibilities entrusted to the commissioner;

(6) has been convicted of a violation of the State Building Code or has refused to comply with a correction order issued by a certified building official, or in local jurisdictions that have not adopted the State Building Code has refused to correct a violation of the State Building Code when the violation has been documented by a certified building official;

(7) has failed to use the proceeds of any payment made to the licensee for the construction of, or any improvement to, residential real estate, as defined in section 326B.802, subdivision 13, for the payment of labor, skill, material, and machinery contributed to the construction or improvement, knowing that the cost of any labor performed, or skill, material, or machinery furnished for the improvement remains unpaid;

(8) has not furnished to the person making payment either a valid lien waiver as to any unpaid labor performed, or skill, material, or machinery furnished for an improvement, or a payment bond in the basic amount of the contract price for the improvement conditioned for the prompt payment to any person or persons entitled to payment;

(9) has engaged in an act or practice that results in compensation to an aggrieved owner or lessee from the contractor recovery fund pursuant to section 326B.89, unless:

(i) the applicant or licensee has repaid the fund twice the amount paid from the fund, plus interest at the rate of 12 percent per year; and

(ii) the applicant or licensee has obtained a surety bond in the amount of at least $40,000, issued by an insurer authorized to transact business in this state;

(10) has engaged in bad faith, unreasonable delays, or frivolous claims in defense of a civil lawsuit or arbitration arising out of their activities as a licensee or certificate of exemption holder under this chapter;

(11) has had a judgment entered against them for failure to make payments to employees, subcontractors, or suppliers, that the licensee has failed to satisfy and all appeals of the judgment have been exhausted or the period for appeal has expired;

(12) if unlicensed, has obtained a building permit by the fraudulent use of a fictitious license number or the license number of another, or, if licensed, has knowingly allowed an unlicensed person to use the licensee's license number for the purpose of fraudulently obtaining a building permit; or has applied for or obtained a building permit for an unlicensed person;

(13) has made use of a forged mechanic's lien waiver under chapter 514;

(14) has provided false, misleading, or incomplete information to the commissioner or has refused to allow a reasonable inspection of records or premises;

(15) has engaged in an act or practice whether or not the act or practice directly involves the business for which the person is licensed, that demonstrates that the applicant or licensee is untrustworthy, financially irresponsible, or otherwise incompetent or unqualified to act under the license granted by the commissioner; or

(16) has failed to comply with requests for information, documents, or other requests from the department within the time specified in the request or, if no time is specified, within 30 days of the mailing of the request by the department.

History:

1991 c 306 s 15; 1993 c 245 s 26,27; 1995 c 169 s 4; 1996 c 439 art 4 s 3,4; 2001 c 208 s 22; 2007 c 140 art 8 s 16,30; art 13 s 4; 2008 c 277 art 1 s 71; 2010 c 183 s 18; 2010 c 280 s 28; 2015 c 54 art 1 s 20; 1Sp2019 c 7 art 9 s 12

326B.845 PENALTIES.

Subdivision 1.Gross misdemeanor.

An individual who violates an order of the commissioner or is the manager, officer, or director of a person who violates an order issued by the commissioner is guilty of a gross misdemeanor.

Subd. 2.Lien rights.

An unlicensed person who knowingly violates sections 326B.802 to 326B.885 has no right to claim a lien under section 514.01 and the lien is void. Nothing in this section affects the lien rights of material suppliers and licensed contractors to the extent provided by law.

History:

1991 c 306 s 16; 1993 c 245 s 28,29; 1999 c 137 s 8; 2007 c 140 art 8 s 17,30; art 13 s 4

326B.85 BUILDING PERMIT CONDITIONED ON LICENSURE; NOTICE OF PERMIT APPLICATION.

Subdivision 1.Building permit.

A political subdivision shall not issue a building permit to an unlicensed person who is required to be licensed under sections 326B.802 to 326B.885. A political subdivision that issues zoning or land use permits in lieu of a building permit shall not issue those permits to an unlicensed person who is required to be licensed under sections 326B.802 to 326B.885. The political subdivision shall report the person applying for the permit to the commissioner who may bring an action against the person.

Subd. 2.Notice of building permit application.

A political subdivision shall notify the department when an application for a building permit involving the construction of new residential real estate has been received from an unlicensed person by submitting a copy of the application to the department within two business days of receipt of the application. The political subdivision may submit a copy of the building permit application by facsimile, United States mail, or electronic communication.

History:

1993 c 245 s 30; 1997 c 222 s 49; 1998 c 254 art 1 s 86; 2007 c 140 art 8 s 18,30; art 13 s 4

326B.855 SERVICE OF PROCESS.

Subdivision 1.Procedure.

Every applicant for licensure or certificate of exemption under sections 326B.802 to 326B.885 shall irrevocably consent to the appointment of the commissioner and successors in office to be the applicant's agent to receive service of any lawful process in any noncriminal suit, action, or proceeding against the applicant or a successor, executor, or administrator which arises under sections 326B.802 to 326B.885 or any rule or order thereunder after the consent has been filed, with the same force and validity as if served personally on the person filing the consent. Service under this section shall be made in compliance with subdivision 3.

Subd. 2.Service on commissioner.

(a) When a person, including any nonresident of this state, engages in conduct prohibited or made actionable by sections 326B.802 to 326B.885, or any rule or order under those sections, and the person has not consented to service of process under subdivision 1, that conduct is equivalent to an appointment of the commissioner and successors in office as the person's agent to receive service of process in any noncriminal suit, action, or proceeding against the person that is based on that conduct and is brought under sections 326B.802 to 326B.885, or any rule or order under those sections, with the same force and validity as if served personally on the person consenting to the appointment of the commissioner and successors in office. Service under this section shall be made in compliance with subdivision 3.

(b) Subdivision 3 applies in all other cases in which a person, including a nonresident of this state, has filed a consent to service of process. This paragraph supersedes any inconsistent provision of law.

(c) Subdivision 3 applies in all cases in which service of process is allowed to be made on the commissioner.

Subd. 3.How made.

Service of process under this section may be made by leaving a copy of the process in the office of the commissioner, or by sending a copy of the process to the commissioner by certified mail, and is not effective unless:

(1) the plaintiff, who may be the commissioner in an action or proceeding instituted by the commissioner, sends notice of the service and a copy of the process by certified mail to the defendant or respondent at the last known address; and

(2) the plaintiff's affidavit of compliance is filed in the action or proceeding on or before the return day of the process, if any, or within further time as the court allows.

History:

1991 c 306 s 17; 1993 c 245 s 31; 2007 c 140 art 8 s 19,30; art 13 s 4; 2008 c 337 s 39

326B.86 BOND; INSURANCE.

Subdivision 1.Bond.

(a) Licensed manufactured home installers and licensed residential roofers must give and maintain a bond to the state. The bond must comply with section 326B.0921.

(b) A licensed residential roofer must post a bond with a penal sum of at least $15,000.

(c) A licensed manufactured home installer must post a bond with a penal sum of at least $2,500.

Bonds issued under sections 326B.802 to 326B.885 are not state bonds or contracts for purposes of sections 8.05 and 16C.05, subdivision 2.

Subd. 2.Insurance.

Each licensee shall have and maintain in effect commercial general liability insurance, which includes premises and operations insurance and products and completed operations insurance, with limits of at least $100,000 per occurrence, $300,000 aggregate limit for bodily injury, and property damage insurance with limits of at least $25,000 or a policy with a single limit for bodily injury and property damage of $300,000 per occurrence and $300,000 aggregate limits. The insurance must be written by an insurer licensed to do business in this state. Each licensee shall maintain on file with the commissioner a certificate evidencing the insurance. In the event of a policy cancellation, the insurer shall send written notice to the commissioner at the same time that a cancellation request is received from or a notice is sent to the insured. The commissioner may increase the minimum amount of insurance required for any licensee or class of licensees if the commissioner considers it to be in the public interest and necessary to protect the interests of Minnesota consumers.

History:

1991 c 306 s 18; 1993 c 245 s 32; 1999 c 137 s 9; 2007 c 9 s 1; 2007 c 140 art 8 s 20,30; art 13 s 4; 2008 c 322 s 7; 2008 c 337 s 40,65; 2009 c 78 art 5 s 22; 2010 c 347 art 3 s 47,76; 2010 c 384 s 90; 2010 c 385 s 6; 2015 c 54 art 1 s 21

326B.865 SIGN CONTRACTOR; BOND.

(a) A sign contractor may post a compliance bond with the commissioner, conditioned that the sign contractor shall faithfully perform duties and comply with laws, ordinances, rules, and contracts entered into for the installation of signs. The bond must be renewed biennially and maintained for so long as determined by the commissioner. The aggregate liability of the surety on the bond to any and all persons, regardless of the number of claims made against the bond, may not exceed the annual amount of the bond. The bond may be canceled as to future liability by the surety upon 30 days' written notice mailed to the commissioner by United States mail.

(b) The amount of the bond shall be $8,000. The bond may be drawn upon only by a local unit of government that requires sign contractors to post a compliance bond. The bond is in lieu of any compliance bond required by a local unit of government.

(c) For purposes of this section, "sign" means a device, structure, fixture, or placard using graphics, symbols, or written copy that is erected on the premises of an establishment including the name of the establishment or identifying the merchandise, services, activities, or entertainment available on the premises.

(d) Each person giving bond under this section shall pay a biennial bond filing fee of $100 to the commissioner of labor and industry.

History:

1997 c 222 s 44; 2007 c 140 art 8 s 1,30; art 13 s 4; 2010 c 347 art 3 s 48,76; 2010 c 385 s 6; 1Sp2011 c 4 art 3 s 48

326B.87 LICENSE NUMBER; ADVERTISING.

Subdivision 1.License number must be displayed.

The license number of a licensee must be placed on all building permits and building permit applications made to or issued by the state or a political subdivision. In jurisdictions that have not adopted the State Building Code, the license number must be placed on the site plan review or zoning permit. License numbers must be on all business cards and all contracts to perform work for which a license is required.

Subd. 2.Advertising.

The license number of a licensee must appear in any advertising by that licensee including but not limited to signs, vehicles, business cards, published display ads, flyers, brochures, websites, and Internet ads.

Subd. 3.Contracts.

Contracts entered into by a licensee must state that the person is licensed and must state the license number.

History:

1991 c 306 s 19; 1995 c 169 s 5; 2007 c 140 art 8 s 21,30; art 13 s 4

326B.875 DISCLOSURES.

If a licensee sells or offers to sell residential property, constructed by the licensee, which is or has been occupied by the licensee, the licensee must, prior to entering into a binding purchase agreement, provide to the buyer a written disclosure which states that any claims that arise as a result of the licensee's construction of the property: (1) will not be covered under the statutory warranty established by chapter 327A, and (2) if the licensee has occupied the residential property for one year or more, will not be eligible for reimbursement from the contractor's recovery fund.

History:

1993 c 245 s 33; 2007 c 140 art 8 s 30; art 13 s 4

326B.88 PUBLIC EDUCATION.

The commissioner may develop materials and programs to educate the public concerning licensure requirements. The commissioner may develop materials for reporting unlicensed contracting activity. The commissioner shall provide information in other languages.

History:

1991 c 306 s 20; 2007 c 140 art 8 s 22,30; art 13 s 4

326B.885 LICENSE RENEWAL.

Subdivision 1.Renewal.

A licensee whose fully completed renewal application has been properly and timely filed and who has not received a notice of denial of renewal is considered to have been approved for renewal and may continue to transact business whether or not the renewed license has been received. Applications are timely if received by March 1 of the renewal year. Applications must be made on a form approved by the commissioner. An application for renewal that does not contain all of the information requested is an incomplete application and will not be processed.

Subd. 2. Renewal period.

(a) A residential contractor, residential remodeler, and residential roofer license shall have a renewal period of two years. The commissioner shall in a manner determined by the commissioner, without the need for any rulemaking under chapter 14, phase in the renewal of residential contractor, residential remodeler, and residential roofer licenses from one year to two years. By June 30, 2011, all renewed residential contractor, residential remodeler, and residential roofer licenses shall be two-year licenses.

(b) A manufactured home installer's license shall have a renewal period of three years, effective for all renewals and new licenses issued after December 31, 2008.

Subd. 3.

[Repealed, 2010 c 347 art 3 s 75]

Subd. 4.

[Repealed, 2010 c 347 art 3 s 75]

History:

1991 c 306 s 21; 1993 c 245 s 34,35; 2007 c 140 art 8 s 23,30; art 13 s 4; 2008 c 337 s 41; 2009 c 78 art 5 s 23

326B.89 CONTRACTOR RECOVERY FUND.

Subdivision 1.Definitions.

(a) For the purposes of this section, the following terms have the meanings given them.

(b) "Gross annual receipts" means the total amount derived from residential contracting or residential remodeling activities, regardless of where the activities are performed, and must not be reduced by costs of goods sold, expenses, losses, or any other amount.

(c) "Licensee" means a person licensed as a residential contractor or residential remodeler.

(d) "Residential real estate" means a new or existing building constructed for habitation by one to four families, and includes detached garages intended for storage of vehicles associated with the residential real estate.

(e) "Fund" means the contractor recovery fund.

(f) "Owner" when used in connection with real property, means a person who has any legal or equitable interest in real property and includes a condominium or townhome association that owns common property located in a condominium building or townhome building or an associated detached garage. Owner does not include any real estate developer or any owner using, or intending to use, the property for a business purpose and not as owner-occupied residential real estate.

(g) "Cycle One" means the time period between July 1 and December 31.

(h) "Cycle Two" means the time period between January 1 and June 30.

Subd. 2.Generally.

The contractor recovery fund is created in the state treasury and shall be administered by the commissioner for the purposes described in this section. Any interest or profit accruing from investment of money in the fund shall be credited to the contractor recovery fund.

Subd. 3.Fund fees.

In addition to any other fees, a person who applies for or renews a license under sections 326B.802 to 326B.885 shall pay a fee to the fund. The person shall pay, in addition to the appropriate application or renewal fee, the following additional fee that shall be deposited in the fund. The amount of the fee shall be based on the person's gross annual receipts for the person's most recent fiscal year preceding the application or renewal, on the following scale:

	Fee	Gross Annual Receipts
	$320	under $1,000,000
	$420	$1,000,000 to $5,000,000
	$520	over $5,000,000

Subd. 4.Purpose of fund.

(a) The purpose of this fund is to:

(1) compensate owners or lessees of residential real estate who meet the requirements of this section;

(2) reimburse the department for all legal and administrative expenses, disbursements, and costs, including staffing costs, incurred in administering and defending the fund;

(3) pay for educational or research projects in the field of residential contracting to further the purposes of sections 326B.801 to 326B.825; and

(4) provide information to the public on residential contracting issues.

(b) No money from this fund may be transferred or spent unless the commissioner determines that the money is being transferred or spent for one of the purposes in paragraph (a).

Subd. 5.Payment limitations.

The commissioner shall not pay compensation from the fund to an owner or a lessee in an amount greater than $75,000 per licensee. The commissioner shall not pay compensation from the fund to owners and lessees in an amount that totals more than $550,000 per licensee. The commissioner shall only pay compensation from the fund for a final judgment that is based on a contract directly between the licensee and the homeowner or lessee that was entered into prior to the cause of action and that requires licensure as a residential building contractor or residential remodeler.

Subd. 6.Verified application.

To be eligible for compensation from the fund, an owner or lessee shall serve on the commissioner a verified application for compensation on a form approved by the commissioner. The application shall verify the following information:

(1) the specific grounds upon which the owner or lessee seeks to recover from the fund;

(2) that the owner or the lessee has obtained a final judgment in a court of competent jurisdiction against a licensee licensed under section 326B.83;

(3) that the final judgment was obtained against the licensee on the grounds of fraudulent, deceptive, or dishonest practices, conversion of funds, or failure of performance that arose directly out of a contract directly between the licensee and the homeowner or lessee that was entered into prior to the cause of action and that occurred when the licensee was licensed and performing any of the special skills enumerated under section 326B.802, subdivision 15;

(4) the amount of the owner's or the lessee's actual and direct out-of-pocket loss on the owner's residential real estate, on residential real estate leased by the lessee, or on new residential real estate that has never been occupied or that was occupied by the licensee for less than one year prior to purchase by the owner;

(5) that the residential real estate is located in Minnesota;

(6) that the owner or the lessee is not the spouse of the licensee or the personal representative of the licensee;

(7) the amount of the final judgment, any amount paid in satisfaction of the final judgment, and the amount owing on the final judgment as of the date of the verified application;

(8) that the owner or lessee has diligently pursued remedies against all the judgment debtors and all other persons liable to the judgment debtor in the contract for which the owner or lessee seeks recovery from the fund; and

(9) that the verified application is being served within two years after the judgment became final.

The verified application must include documents evidencing the amount of the owner's or the lessee's actual and direct out-of-pocket loss. The owner's and the lessee's actual and direct out-of-pocket loss shall not include any attorney fees, litigation costs or fees, interest on the loss, and interest on the final judgment obtained as a result of the loss or any costs not directly related to the value difference between what was contracted for and what was provided. Any amount paid in satisfaction of the final judgment shall be applied to the owner's or lessee's actual and direct out-of-pocket loss. An owner or lessee may serve a verified application regardless of whether the final judgment has been discharged by a bankruptcy court. A judgment issued by a court is final if all proceedings on the judgment have either been pursued and concluded or been forgone, including all reviews and appeals. For purposes of this section, owners who are joint tenants or tenants in common are deemed to be a single owner. For purposes of this section, owners and lessees eligible for payment of compensation from the fund shall not include government agencies, political subdivisions, financial institutions, and any other entity that purchases, guarantees, or insures a loan secured by real estate.

Subd. 7.Commissioner review.

The commissioner shall within 120 days after receipt of the complete verified application:

(1) enter into an agreement with an owner or a lessee that resolves the verified application for compensation from the fund; or

(2) issue an order to the owner or the lessee accepting, modifying, or denying the verified application for compensation from the fund.

Upon receipt of an order issued under clause (2), the owner or the lessee shall have 30 days to serve upon the commissioner a written request for a hearing. If the owner or the lessee does not serve upon the commissioner a timely written request for hearing, the order issued under clause (2) shall become a final order of the commissioner that may not be reviewed by any court or agency. The commissioner shall order compensation from the fund only if the owner or the lessee has filed a verified application that complies with subdivision 6 and if the commissioner determines based on review of the application that compensation should be paid from the fund. The commissioner shall not be bound by any prior settlement, compromise, or stipulation between the owner or the lessee and the licensee.

Subd. 8.Administrative hearing.

If an owner or a lessee timely serves a request for hearing under subdivision 7, the commissioner shall request that an administrative law judge be assigned and that a hearing be conducted under the contested case provisions of chapter 14 within 45 days after the commissioner received the request for hearing, unless the parties agree to a later date. The commissioner must notify the owner or lessee of the time and place of the hearing at least 15 days before the hearing. Upon petition of the commissioner, the administrative law judge shall continue the hearing up to 60 days and upon a showing of good cause may continue the hearing for such additional period as the administrative law judge deems appropriate.

At the hearing the owner or the lessee shall have the burden of proving by substantial evidence under subdivision 6, clauses (1) to (8). Whenever an applicant's judgment is by default, stipulation, or consent, or whenever the action against the licensee was defended by a trustee in bankruptcy, the applicant shall have the burden of proving the cause of action for fraudulent, deceptive, or dishonest practices, conversion of funds, or failure of performance. Otherwise, the judgment shall create a rebuttable presumption of the fraudulent, deceptive, or dishonest practices, conversion of funds, or failure of performance. This presumption affects the burden of producing evidence.

The administrative law judge shall issue findings of fact, conclusions of law, and order. If the administrative law judge finds that compensation should be paid to the owner or the lessee, the administrative law judge shall order the commissioner to make payment from the fund of the amount it finds to be payable pursuant to the provisions of and in accordance with the limitations contained in this section. The order of the administrative law judge shall constitute the final decision of the agency in the contested case. The commissioner or the owner or lessee may seek judicial review of the administrative law judge's findings of fact, conclusions of law, and order in accordance with sections 14.63 to 14.69.

Subd. 9.Satisfaction of applications for compensation.

The commissioner shall pay compensation from the fund to an owner or a lessee pursuant to the terms of an agreement that has been entered into under subdivision 7, clause (1), or pursuant to a final order that has been issued under subdivision 7, clause (2), or subdivision 8 by December 31 for applications submitted by July 1 or June 30 for applications submitted by January 1 of the fiscal year. The commissioner shall not pay compensation to owners or lessees that totals more than $275,000 per licensee during Cycle One of a fiscal year nor shall the commissioner pay out during Cycle One if the payout will result in the exhaustion of a licensee's fund. If compensation paid to owners or lessees in Cycle One would total more than $275,000 or would result in exhaustion of a licensee's fund in Cycle One, the commissioner shall not make a final determination of compensation for claims against the licensee until the completion of Cycle Two. If the claims against a licensee for the fiscal year result in the exhaustion of a licensee's fund or the fund as a whole, the commissioner must prorate the amount available among the owners and lessees based on the amount agreed to or ordered to be paid to each owner or lessee. The commissioner shall mail notice of the proration to all owners and lessees no later than March 31 of the current fiscal year. Any compensation paid by the commissioner in accordance with this subdivision shall be deemed to satisfy and extinguish any right to compensation from the fund based upon the verified application of the owner or lessee.

Subd. 10.Right of subrogation.

Notwithstanding subdivisions 1 to 9 and 11 to 16, the commissioner shall not pay compensation from the fund to an owner or lessee unless and until the owner or lessee executes an assignment to the commissioner of all rights, title, and interest in the final judgment in the amount of the compensation to be paid under an agreement under subdivision 7, clause (1), or a final order issued under subdivision 7, clause (2), or subdivision 8. If the commissioner pays compensation from the fund to an owner or a lessee pursuant to an agreement under subdivision 7, clause (1), or a final order issued under subdivision 7, clause (2), or subdivision 8, then the commissioner shall be subrogated to all of the rights, title, and interest in the owner's or lessee's final judgment in the amount of compensation paid from the fund. The commissioner shall deposit in the fund money recovered under this subdivision.

Subd. 11.Effect of section on commissioner's authority.

Nothing contained in this section shall limit the authority of the commissioner to take disciplinary action against a licensee under the provisions of this chapter. A licensee's repayment in full of obligations to the fund shall not nullify or modify the effect of any other disciplinary proceeding brought under the provisions of this chapter.

Subd. 12.Limitation.

Notwithstanding subdivision 5, nothing may obligate the fund for claims brought by:

(1) insurers or sureties under subrogation or similar theories; or

(2) owners of residential property where the contracting activity complained of was the result of a contract entered into with a prior owner, unless the claim is brought and judgment is rendered for breach of the statutory warranty set forth in chapter 327A.

Subd. 13.Condominiums or townhouses.

(a) For purposes of this section, the terms "owner" and "lessee" of residential real estate include the following, regardless of the number of residential units per building:

(1) an owner or lessee of an apartment as defined in and governed by chapter 515;

(2) an owner or lessee of a unit in a common interest community created under or governed by chapter 515B;

(3) an owner or lessee of a unit in a planned community or cooperative created prior to June 1, 1994, that has not elected to be governed by chapter 515B;

(4) an association or master association, as defined in chapter 515B, that owns or leases the common elements of a common interest community; and

(5) a homeowners association that owns or leases the common elements in a planned community or cooperative created prior to June 1, 1994, that has not elected to be governed by chapter 515B.

(b) For purposes of this subdivision, "common elements" means common areas and facilities as defined in chapter 515 and common elements as defined in chapter 515B.

Subd. 14.

[Repealed, 2017 c 94 art 2 s 19]

Subd. 15.Appropriation.

Money in the fund is appropriated to the commissioner for the purposes of this section.

Subd. 16.Additional assessment.

If the balance in the fund is at any time less than the commissioner determines is necessary to carry out the purposes of this section, every licensee, when renewing a license, shall pay, in addition to the annual renewal fee and the fee set forth in subdivision 3, an assessment not to exceed $200. The commissioner shall set the amount of assessment based on a reasonable determination of the amount that is necessary to restore a balance in the fund adequate to carry out the purposes of this section.

Subd. 17.Recovery of payments.

If the commissioner pays compensation from the fund on the basis of any false or misleading information provided to the commissioner in connection with the application for compensation, then, upon the application of the commissioner, a district court shall order the owner or lessee to repay to the fund all such compensation paid from the fund. In addition, the state may be allowed an amount determined by the court to be the reasonable value of all or part of the litigation expenses, including attorney fees, incurred by the state. The commissioner shall deposit in the fund money recovered under this subdivision.

Subd. 18.Payment of penalty.

If an owner or lessee violates section 326B.084 in connection with an application for compensation from the fund, and if the commissioner issues to the owner or lessee an administrative order under section 326B.082, subdivision 7, for that violation of section 326B.084, then the commissioner shall deposit in the fund all penalties paid pursuant to the administrative order.

History:

2007 c 135 art 3 s 29; 2007 c 140 art 8 s 28,30; art 13 s 4; 2008 c 337 s 49-52; 2009 c 78 art 5 s 24,25; 2010 c 280 s 29-37; 1Sp2011 c 4 art 3 s 49,50; 2013 c 85 art 2 s 35; 2017 c 94 art 2 s 15,16; 1Sp2021 c 10 art 3 s 15-18

HIGH PRESSURE PIPING

326B.90 DEPARTMENT TO SUPERVISE HIGH PRESSURE PIPING.

The department shall supervise all high pressure piping used on all projects in this state.

The department shall employ inspectors and other assistants to carry out the provisions of sections 326B.90 to 326B.925.

History:

(5887-30a) 1937 c 367 s 2; Ex1967 c 1 s 6; 1984 c 481 s 1; 2007 c 135 art 4 s 1; 2007 c 140 art 10 s 1,11; art 13 s 4

326B.91 DEFINITIONS.

Subdivision 1.Scope.

For the purpose of sections 326B.90 to 326B.925, the following terms have the meanings given them.

Subd. 2.Board.

"Board" means the Board of High Pressure Piping Systems.

Subd. 3.Master high pressure pipefitter.

"Master high pressure pipefitter" means an individual, such as a steamfitter, engaged in the planning, superintending, and practical installation of high pressure piping and appurtenances, and otherwise lawfully qualified to construct high pressure piping installations and make replacements to existing plants, who is also qualified to conduct the business of high pressure piping installations and who is familiar with the laws, rules, and minimum standards governing them.

Subd. 4.High pressure piping.

"High pressure piping" means all high pressure piping used in the installation of hot water or steam heating boilers, any systems of piping hot water or other medium used for heating that exceed 30 p.s.i. gauge and 250 degrees Fahrenheit, or any system of high pressure steam, ammonia piping, or bioprocess piping, but shall not include any high pressure piping under the direct jurisdiction of the United States.

Subd. 5.High pressure steam.

"High pressure steam" means a pressure in excess of 15 pounds per square inch.

Subd. 6.Journeyworker high pressure pipefitter.

"Journeyworker high pressure pipefitter" means an individual, such as a steamfitter, who is not a master high pressure pipefitter and who is engaged in the practical installation of high pressure piping and appurtenances in the employ of a master high pressure pipefitter.

Subd. 7.Municipality.

"Municipality" means a statutory or home rule charter city.

Subd. 8.Pipefitter apprentice.

A "pipefitter apprentice" is an individual employed in the trade of the practical construction and installation of high pressure piping and appurtenances under an apprenticeship agreement approved by the department under section 178.07.

History:

1984 c 481 s 2; 1987 c 132 s 1; 1989 c 22 s 1; 1994 c 465 art 1 s 42; 2006 c 241 s 4; 2007 c 140 art 10 s 2-6,11; art 13 s 4; 2016 c 158 art 1 s 174; 2017 c 68 art 1 s 13,14,26; 1Sp2017 c 7 s 8

326B.92 APPLICATION, PERMIT, FILING, AND INSPECTION FEES.

Subdivision 1.Required permit.

No person shall construct or install high pressure piping systems without first filing an application for a permit with the department or a municipality that has complied with subdivision 2.

Subd. 2.Permissive municipal regulation.

The commissioner may enter into an agreement with a municipality, in which the municipality agrees to perform inspections and issue permits for the construction and installation of high pressure piping systems within the municipality's geographical area of jurisdiction, if:

(a) The municipality has adopted:

(1) the code for power piping systems, Minnesota Rules, parts 5230.0250 to 5230.5920;

(2) an ordinance that authorizes the municipality to issue permits to persons holding a high pressure piping contractor license issued by the department and only for construction or installation that would, if performed properly, fully comply with all Minnesota Statutes and Minnesota Rules;

(3) an ordinance that authorizes the municipality to perform the inspections that are required under Minnesota Statutes or Minnesota Rules governing the construction and installation of high pressure piping systems; and

(4) an ordinance that authorizes the municipality to enforce the code for power piping systems in its entirety.

(b) The municipality agrees to issue permits only to persons holding a high pressure piping contractor license as required by law at the time of the permit issuance, and only for construction or installation that would, if performed properly, comply with all Minnesota Statutes and Minnesota Rules governing the construction or installation of high pressure piping systems.

(c) The municipality agrees to issue permits only on forms approved by the department.

(d) The municipality agrees that, for each permit issued by the municipality, the municipality shall perform one or more inspections of the construction or installation to determine whether the construction or installation complies with all Minnesota Statutes and Minnesota Rules governing the construction or installation of high pressure piping systems, and shall prepare a written report of each inspection.

(e) The municipality agrees to notify the commissioner within 24 hours after the municipality discovers any violation of the licensing laws related to high pressure piping.

(f) The municipality agrees to notify the commissioner immediately if the municipality discovers that any entity has failed to meet a deadline set by the municipality for correction of a violation of the high pressure piping laws.

(g) The commissioner determines that the individuals who will conduct the inspections for the municipality do not have any conflict of interest in conducting the inspections.

(h) Individuals who will conduct the inspections for the municipality are permanent employees of the municipality and are licensed master high pressure pipefitters or licensed journeyworker high pressure pipefitters.

(i) The municipality agrees to notify the commissioner within ten days of any changes in the names or qualifications of the individuals who conduct the inspections for the municipality.

(j) The municipality agrees to enforce in its entirety the code for power piping systems on all projects.

(k) The municipality shall not approve any piping installation unless the installation conforms to all applicable provisions of the high pressure piping laws in effect at the time of the installation.

(l) The municipality agrees to promptly require compliance or revoke a permit that it has issued if there is noncompliance with any of the applicable provisions of the high pressure piping laws in connection with the work covered by the permit. The municipality agrees to revoke the permit if any laws regulating the licensing of pipefitters have been violated.

(m) The municipality agrees to keep official records of all documents received, including permit applications, and of all permits issued, reports of inspections, and notices issued in connection with inspections.

(n) The municipality agrees to maintain the records described in paragraph (m) in the official records of the municipality for the period required for the retention of public records under section 138.17, and shall make these records readily available for review according to section 13.37.

(o) Not later than the tenth day of each month, the municipality shall submit to the commissioner a report of all high pressure piping permits issued by the municipality during the preceding month. This report shall be in a format approved by the commissioner and shall include:

(1) the name of the contractor;

(2) the license number of the contractor's license issued by the commissioner;

(3) the permit number;

(4) the address of the job;

(5) the date the permit was issued;

(6) a brief description of the work; and

(7) the amount of the inspection fee.

(p) Not later than the 31st day of January of each year, the municipality shall submit a summary report to the commissioner identifying the status of each high pressure piping project for which the municipality issued a permit during the preceding year, and the status of high pressure piping projects for which the municipality issued a permit during a prior year where no final inspection had occurred by the first day of the preceding year. This summary report shall include:

(1) the permit number;

(2) the date of any final inspection; and

(3) identification of any violation of high pressure piping laws related to work covered by the permit.

(q) The municipality and the commissioner agree that if at any time during the agreement the municipality does not have in effect the code for high pressure piping systems or any of the ordinances described in paragraph (a), or if the commissioner determines that the municipality is not properly administering and enforcing the code for high pressure piping or is otherwise not complying with the agreement:

(1) the commissioner may, effective 14 days after the municipality's receipt of written notice, terminate the agreement and have the administration and enforcement of the high pressure piping code in the involved municipality undertaken by the department;

(2) the municipality may challenge the termination in a contested case before the commissioner pursuant to the Administrative Procedure Act; and

(3) while any challenge under clause (2) is pending, the commissioner may exercise oversight of the municipality to the extent needed to ensure that high pressure piping inspections are performed and permits are issued in accordance with the high pressure piping laws.

(r) The municipality and the commissioner agree that the municipality may terminate the agreement with or without cause on 90 days' written notice to the commissioner.

(s) The municipality and the commissioner agree that no municipality shall revoke, suspend, or place restrictions on any high pressure piping license issued by the commissioner. If the municipality identifies during an inspection any violation that may warrant revocation, suspension, or placement of restrictions on a high pressure piping license issued by the commissioner, the municipality shall promptly notify the commissioner of the violation and the commissioner shall determine whether revocation, suspension, or placement of restrictions on any high pressure piping license issued by the commissioner is appropriate.

Subd. 3.Filing and inspection fees.

(a) The department must charge a filing fee and an inspection fee for all applications for permits to construct or install high pressure piping systems. The filing fee shall be $100. The inspection fee shall be calculated as follows:

(1) When an application for a permit is filed prior to the start of construction or installation, the inspection fee shall be $150 plus 0.022 of the first $1,000,000, plus 0.011 of the next $2,000,000, plus 0.00055 of the amount over $3,000,000 of the cost of construction or installation.

(2) Except as provided in paragraph (b), when an application for permit is filed after the start of construction or installation, the inspection fee shall be the greater of: $1,100; or $150 plus 0.033 of the first $1,000,000, plus 0.0165 of the next $2,000,000, plus 0.011 of the amount over $3,000,000 of the cost of construction or installation.

(b) The commissioner shall consider any extenuating circumstances that caused an application for permit to be filed after the start of construction or installation. If warranted by such extenuating circumstances, the commissioner may calculate the inspection fee as if the application for permit had been filed prior to the start of construction or installation.

(c) Paragraphs (a) and (b) do not apply where a permit is issued by a municipality in accordance with an agreement under subdivision 2.

History:

(5887-30b, 5887-30c) 1937 c 367 s 3,4; Ex1967 c 1 s 6; 1973 c 123 art 5 s 7; 1984 c 481 s 3; 1987 c 132 s 2; 1989 c 335 art 4 s 106; 1996 c 305 art 3 s 32; 2007 c 135 art 4 s 2; 2007 c 140 art 10 s 7,11; art 13 s 4; 2008 c 337 s 25,65; 2016 c 158 art 1 s 175; 2017 c 68 art 1 s 15,26; 1Sp2017 c 7 s 8

326B.921 LICENSING AND REGISTRATION.

Subdivision 1.License required; rules; time credit.

No individual shall engage in or work at the business of a master high pressure pipefitter unless issued a master high pressure pipefitter license to do so by the department under rules adopted by the board. No license shall be required for repairs on existing installations. No individual shall engage in or work at the business of journeyworker high pressure pipefitter unless issued a journeyworker high pressure pipefitter competency license to do so by the department under rules adopted by the board. An individual possessing a master high pressure pipefitter competency license may also work as a journeyworker high pressure pipefitter.

No person shall construct or install high pressure piping, nor install high pressure piping in connection with the dealing in and selling of high pressure pipe material and supplies, unless, at all times, an individual possessing a master high pressure pipefitter competency license or a journeyworker high pressure pipefitter competency license is responsible for ensuring that the high pressure pipefitting work is in conformity with Minnesota Statutes and Minnesota Rules.

The board shall prescribe rules, not inconsistent herewith, for the examination and competency licensing of master high pressure pipefitters and journeyworker high pressure pipefitters.

An employee performing the duties of inspector for the department in regulating pipefitting shall not receive time credit for the inspection duties when making an application for a license required by this section.

Subd. 2.High pressure pipefitting contractor license.

Before obtaining a permit for high pressure piping work, a person must obtain or utilize a contractor with a high pressure piping contractor license.

A person must have at all times as a full-time employee at least one individual holding a master high pressure pipefitter competency license. Only full-time employees who hold master high pressure pipefitter licenses are authorized to obtain high pressure piping permits in the name of the contractor. The master high pressure pipefitter competency license holder can be the employee of only one high pressure piping contractor at a time. An application for a high pressure piping contractor license shall include a verified statement that the applicant or licensee has complied with this subdivision.

To retain its contractor license without reapplication, a person holding a high pressure piping contractor license that ceases to employ an individual holding a master high pressure pipefitter competency license shall have 60 days from the last day of employment of its previous master high pressure pipefitter competency license holder to employ another license holder. The department must be notified no later than five days after the last day of employment of the previous license holder.

No high pressure pipefitting work may be performed during any period when the high pressure pipefitting contractor does not have a master high pressure pipefitter competency license holder on staff. If a license holder is not employed within 60 days after the last day of employment of the previous license holder, the pipefitting contractor license shall lapse.

The board shall prescribe by rule procedures for application for and issuance of contractor licenses.

Subd. 3.Registration requirement.

All unlicensed individuals, other than pipefitter apprentices, must be registered under subdivision 4. No licensed high pressure piping contractor shall employ an unlicensed individual to assist in the practical construction and installation of high pressure piping and appurtenances unless the unlicensed individual is registered with the department. A pipefitter apprentice or registered unlicensed individual employed by a high pressure piping contractor may assist in the practical construction and installation of high pressure piping and appurtenances only while under direct supervision of a licensed master high pressure pipefitter or licensed journeyworker high pressure pipefitter employed by the same high pressure piping contractor. The licensed master high pressure pipefitter or licensed journeyworker high pressure pipefitter shall supervise no more than two pipefitter apprentices or registered unlicensed individuals. The licensed master high pressure pipefitter or journeyworker high pressure pipefitter is responsible for ensuring that all high pressure piping work performed by the pipefitter apprentice or registered unlicensed individual complies with Minnesota Statutes and Minnesota Rules.

Subd. 4.Registration with commissioner.

An unlicensed individual may register to assist in the practical construction and installation of high pressure piping and appurtenances while in the employ of a licensed high pressure piping contractor by completing and submitting to the commissioner a registration form provided by the commissioner, with all fees required by section 326B.092. The board may prescribe rules, not inconsistent with this section, for the registration of unlicensed individuals.

Applications for initial registration may be submitted at any time. Registration must be renewed annually and shall be valid for one calendar year beginning January 1.

Subd. 5.Bond.

As a condition of licensing, each applicant for a high pressure piping contractor license shall give and maintain a bond to the state in the total sum of $15,000 conditioned upon the faithful and lawful performance of all work contracted for or performed within the state. The bond shall run to and be for the benefit of persons injured or suffering financial loss by reason of failure of payment or performance. Claims and actions on the bond may be brought according to sections 574.26 to 574.38.

The term of the bond must be concurrent with the term of the high pressure pipefitting contractor license and run without interruption from the date of the issuance of the license to the end of the calendar year. All high pressure pipefitting contractor licenses must be annually renewed on a calendar year basis.

The bond must be filed with the department and shall be in lieu of any other contractor license bonds required by any political subdivision for high pressure pipefitting. The bond must be written by a corporate surety licensed to do business in the state.

Subd. 6.Insurance.

In addition to the bond described in subdivision 5, each applicant for a high pressure pipefitting contractor license or renewal shall have in force public liability insurance, including products liability insurance, with limits of at least $100,000 per person and $300,000 per occurrence and property damage insurance with limits of at least $50,000.

The insurance must be kept in force for the entire term of the high pressure pipefitting contractor license, and the license shall be suspended by the department if at any time the insurance is not in force.

The insurance must be written by an insurer licensed to do business in the state and shall be in lieu of any other insurance required by any subdivision of government for high pressure pipefitting. Each person holding a high pressure pipefitting contractor license shall maintain on file with the department a certificate evidencing the insurance. In the event of a policy cancellation, the insurer shall send written notice to the commissioner at the same time that a cancellation request is received from or a notice is sent to the insured.

Subd. 7.License, registration, and renewal fees.

For purposes of calculating license, registration, and renewal fees required under section 326B.092:

(1) the registration of an unlicensed individual under subdivision 4 is an entry level license;

(2) a journeyworker high pressure pipefitter license is a journeyworker license;

(3) a master high pressure pipefitter license is a master license; and

(4) a high pressure piping contractor license is a business license.

Subd. 8.Reciprocity with other states.

The commissioner may issue a temporary license without examination, upon payment of the required fee, to nonresident applicants who are licensed under the laws of a state having standards for licensing which the commissioner determines are substantially equivalent to the standards of this state if the other state grants similar privileges to Minnesota residents duly licensed in this state. Applicants who receive a temporary license under this section may acquire an aggregate of 24 months of experience before they have to apply and pass the licensing examination. Applicants must register with the commissioner of labor and industry and the commissioner shall set a fee for a temporary license. Applicants have five years in which to comply with this section.

History:

(5887-30d) 1937 c 367 s 5; Ex1967 c 1 s 6; 1978 c 604 s 2; 1979 c 50 s 40; 1981 c 72 s 1; 1984 c 481 s 4; 1986 c 444; 1987 c 132 s 3; 1995 c 123 s 1-5; 2004 c 251 s 13; 2007 c 135 art 4 s 4-6; 2007 c 140 art 10 s 8,11; art 13 s 4; 2008 c 337 s 26-30; 2010 c 183 s 19; 2010 c 280 s 38; 2010 c 347 art 3 s 49-51,76; 2010 c 384 s 91; 2010 c 385 s 6; 2015 c 54 art 1 s 22; 2017 c 68 art 1 s 16-22,26; 1Sp2017 c 7 s 7,8

326B.922 LICENSE APPLICATION AND RENEWAL.

(a) Application for a master high pressure pipefitter, a journeyworker high pressure pipefitter, or a high pressure piping contractor license shall be made to the department, with all fees required by section 326B.092.

(b) The applicant for a master high pressure pipefitter or a journeyworker high pressure pipefitter license shall be licensed only after passing an examination developed and administered by the department in accordance with rules adopted by the board.

(c) All initial master high pressure pipefitter licenses, journeyworker high pressure pipefitter licenses, and high pressure piping contractor licenses are effective for more than one calendar year and expire on December 31 of the year after the year in which the application is made. The commissioner shall in a manner determined by the commissioner, without the need for any rulemaking under chapter 14, phase in the renewal of master high pressure pipefitter, journeyworker high pressure pipefitter, and high pressure piping contractor licenses from one year to two years. By June 30, 2012, all such licenses shall be two-year licenses.

History:

(5887-30g) 1937 c 367 s 8; 1951 c 119 s 1; 1959 c 134 s 1; Ex1967 c 1 s 6; 1974 c 7 s 1; 1981 c 72 s 2; 1984 c 481 s 5; 1987 c 132 s 4; 1995 c 123 s 6; 1996 c 305 art 3 s 33; 1999 c 250 art 3 s 27; 2007 c 135 art 4 s 7; 2007 c 140 art 10 s 9,11; art 13 s 4; 2008 c 337 s 31; 2010 c 347 art 3 s 52,76; 2010 c 385 s 6; 2017 c 68 art 1 s 23,26; 1Sp2017 c 7 s 8

326B.925 BOARD OF HIGH PRESSURE PIPING SYSTEMS.

Subdivision 1.Composition.

(a) The Board of High Pressure Piping Systems shall consist of 13 members. Twelve members shall be appointed by the governor with the advice and consent of the senate and shall be voting members. Appointments of members by the governor shall be made in accordance with section 15.066. If the senate votes to refuse to consent to an appointment of a member made by the governor, the governor shall appoint a new member with the advice and consent of the senate. One member shall be the commissioner of labor and industry or the commissioner of labor and industry's designee, who shall be a voting member. Of the 12 appointed members, the composition shall be as follows:

(1) one member shall be a high pressure piping inspector;

(2) one member shall be a licensed mechanical engineer;

(3) one member shall be a representative of the high pressure piping industry;

(4) four members shall be master high pressure pipefitters engaged in the business of high pressure piping, two from the metropolitan area and two from greater Minnesota;

(5) two members shall be journeyworker high pressure pipefitters engaged in the business of high pressure piping systems installation, one from the metropolitan area and one from greater Minnesota;

(6) one member shall be a representative of industrial companies that use high pressure piping systems in their industrial process;

(7) one member shall be a representative from utility companies in Minnesota; and

(8) one member shall be a public member as defined by section 214.02.

The high pressure piping inspector shall be appointed for a term to end December 31, 2011. The professional mechanical engineer shall be appointed for a term to end December 31, 2010. The representative of the high pressure piping industry shall be appointed for a term to end December 31, 2011. Two of the master high pressure pipefitters shall be appointed for a term to end December 31, 2011. The other two master high pressure pipefitters shall be appointed for a term to end December 31, 2010. One of the journeyworker high pressure pipefitters shall be appointed for a term to end December 31, 2011. The other journeyworker high pressure pipefitter shall be appointed for a term to end December 31, 2010. The one representative of industrial companies that use high pressure piping systems in their industrial process shall be appointed for a term to end December 31, 2010. The one representative of a utility company in Minnesota shall be appointed for a term to end December 31, 2010. The public member shall be appointed for a term to end December 31, 2010.

(b) The licensed professional mechanical engineer must possess a current Minnesota professional engineering license and maintain the license for the duration of their term. All other appointed members, except for the representative of the piping industry, the representative of industrial companies that use high pressure piping systems, the public member, and the representative of public utility companies in Minnesota, must possess a current high pressure piping license issued by the Department of Labor and Industry and maintain that license for the duration of their term. All appointed members must be residents of Minnesota at the time of and throughout the member's appointment. The term of any appointed member that does not maintain membership qualification status shall end on the date of status change and the governor shall appoint a new member. It is the responsibility of the member to notify the board of the member's status change.

(c) For appointed members, except the initial terms designated in paragraph (a), each term shall be three years with the terms ending on December 31. Members appointed by the governor shall be limited to three consecutive terms. The governor shall, all or in part, reappoint the current members or appoint replacement members with the advice and consent of the senate. Midterm vacancies shall be filled for the remaining portion of the term. Vacancies occurring with less than six months time remaining in the term shall be filled for the existing term and the following three-year term. Members may serve until their successors are appointed but in no case later than July 1 in a year in which the term expires unless reappointed.

Subd. 2.Powers; duties; administrative support.

(a) The board shall have the power to:

(1) elect its chair, vice-chair, and secretary;

(2) adopt bylaws that specify the duties of its officers, the meeting dates of the board, and containing such other provisions as may be useful and necessary for the efficient conduct of the business of the board;

(3) adopt the high pressure piping code that must be followed in this state and any high pressure piping code amendments thereto. The board shall adopt the high pressure piping code and any amendments thereto pursuant to chapter 14, and as provided in subdivision 6, paragraphs (b), (c), and (d);

(4) review requests for final interpretations and issue final interpretations as provided in section 326B.127, subdivision 5;

(5) except for rules regulating continuing education, adopt rules that regulate the licensure or registration of high pressure piping contractors, journeyworkers, and other persons engaged in the design, installation, and alteration of high pressure piping systems, except for those individuals licensed under section 326.02, subdivisions 2 and 3. The board shall adopt these rules pursuant to chapter 14 and as provided in subdivision 6, paragraphs (e) and (f);

(6) advise the commissioner regarding educational requirements for high pressure piping inspectors;

(7) refer complaints or other communications to the commissioner, whether oral or written, as provided in subdivision 8 that allege or imply a violation of a statute, rule, or order that the commissioner has the authority to enforce pertaining to code compliance, licensure, or an offering to perform or performance of unlicensed high pressure piping services;

(8) approve per diem and expenses deemed necessary for its members as provided in subdivision 3;

(9) select from its members individuals to serve on any other state advisory council, board, or committee;

(10) recommend the fees for licenses and registrations; and

(11) approve license reciprocity agreements.

Except for the powers granted to the Plumbing Board, Board of Electricity, and the Board of High Pressure Piping Systems, the commissioner of labor and industry shall administer and enforce the provisions of this chapter and any rules promulgated pursuant thereto.

(b) The board shall comply with section 15.0597, subdivisions 2 and 4.

(c) The commissioner shall coordinate the board's rulemaking and recommendations with the recommendations and rulemaking conducted by the other boards created pursuant to chapter 326B. The commissioner shall provide staff support to the board. The support includes professional, legal, technical, and clerical staff necessary to perform rulemaking and other duties assigned to the board. The commissioner of labor and industry shall supply necessary office space and supplies to assist the board in its duties.

Subd. 3.Compensation.

(a) Members of the board may be compensated at the rate of $55 a day spent on board activities, when authorized by the board, plus expenses in the same manner and amount as authorized by the commissioner's plan adopted under section 43A.18, subdivision 2. Members who, as a result of time spent attending board meetings, incur child care expenses that would not otherwise have been incurred, may be reimbursed for those expenses upon board authorization.

(b) Members who are state employees or employees of the political subdivisions of the state must not receive the daily payment for activities that occur during working hours for which they are compensated by the state or political subdivision. However, a state or political subdivision employee may receive the daily payment if the employee uses vacation time or compensatory time accumulated in accordance with a collective bargaining agreement or compensation plan for board activities. Members who are state employees or employees of the political subdivisions of the state may receive the expenses provided for in this subdivision unless the expenses are reimbursed by another source. Members who are state employees or employees of political subdivisions of the state may be reimbursed for child care expenses only for time spent on board activities that are outside their working hours.

(c) The board shall adopt internal standards prescribing what constitutes a day spent on board activities for purposes of making daily payments under this subdivision.

Subd. 4.Removal; vacancies.

(a) An appointed member of the board may be removed by the governor at any time (1) for cause, after notice and hearing, or (2) after missing three consecutive meetings. The chair of the board shall inform the governor of an appointed member missing the three consecutive meetings. After the second consecutive missed meeting and before the next meeting, the secretary of the board shall notify the appointed member in writing that the member may be removed for missing the next meeting. In the case of a vacancy on the board, the governor shall, with the advice and consent of the senate, appoint a person to fill the vacancy for the remainder of the unexpired term.

(b) Vacancies shall be filled pursuant to section 15.0597, subdivisions 5 and 6.

Subd. 5.Membership vacancies within three months of appointment.

Notwithstanding any law to the contrary, when a membership on the board becomes vacant within three months after being filled through the appointments process, the governor may, upon notification to the Office of Secretary of State, choose a new member from the applications on hand and need not repeat the process.

Subd. 6.Officers, quorum, voting.

(a) The board shall elect annually from its members a chair, vice-chair, and secretary. A quorum of the board shall consist of a majority of members of the board qualified to vote on the matter in question. All questions concerning the manner in which a meeting is conducted or called that is not covered by statute shall be determined by Robert's Rules of Order (revised) unless otherwise specified by the bylaws.

(b) Except as provided in paragraph (c), each high pressure piping code amendment considered by the board that receives an affirmative two-thirds or more majority vote of all the voting members of the board shall be included in the next high pressure piping code rulemaking proceeding initiated by the board. If a high pressure piping code amendment considered, or reconsidered, by the board receives less than a two-thirds majority vote of all the voting members of the board, the high pressure piping code amendment shall not be included in the next high pressure piping code rulemaking proceeding initiated by the board.

(c) If the high pressure piping code amendment considered by the board is to replace the Minnesota High Pressure Piping Code with a model high pressure piping code, then the amendment may only be included in the next high pressure piping code rulemaking proceeding if it receives an affirmative two-thirds or more majority vote of all the voting members of the board.

(d) The board may reconsider high pressure piping code amendments during an active high pressure piping code rulemaking proceeding in which the amendment previously failed to receive a two-thirds majority vote or more of all the voting members of the board only if new or updated information that affects the high pressure piping code amendment is presented to the board. The board may also reconsider failed high pressure piping code amendments in subsequent high pressure piping code rulemaking proceedings.

(e) Each proposed rule and rule amendment considered by the board pursuant to the rulemaking authority specified in subdivision 2, paragraph (a), clause (5), that receives an affirmative majority vote of all the voting members of the board shall be included in the next rulemaking proceeding initiated by the board. If a proposed rule or rule amendment considered, or reconsidered, by the board receives less than an affirmative majority vote of all the voting members of the board, the proposed rule or rule amendment shall not be included in the next rulemaking proceeding initiated by the board.

(f) The board may reconsider the proposed rule or rule amendment during an active rulemaking proceeding in which the amendment previously failed to receive an affirmative majority vote of all the voting members of the board only if new or updated information that affects the proposed rule or rule amendment is presented to the board. The board may also reconsider failed proposed rules or rule amendments in subsequent rulemaking proceedings.

Subd. 7.Board meetings.

(a) The board shall hold meetings at such times as the board shall specify. Notice and conduct of all meetings shall be pursuant to chapter 13D, and in such a manner as the bylaws may provide.

(b) If compliance with section 13D.02 is impractical, the board may conduct a meeting of its members by telephone or other electronic means so long as the following conditions are met:

(1) all members of the board participating in the meeting, wherever their physical location, can hear one another and can hear all discussion and testimony;

(2) members of the public present at the regular meeting location of the board can hear clearly all discussion and testimony and all votes of members of the board and, if needed, receive those services required by sections 15.44 and 15.441;

(3) at least one member of the board is physically present at the regular meeting location; and

(4) all votes are conducted by roll call, so each member's vote on each issue can be identified and recorded.

Each member of the board participating in a meeting by telephone or other electronic means is considered present at the meeting for purposes of determining a quorum and participating in all proceedings.

If telephone or other electronic means is used to conduct a regular, special, or emergency meeting, the board, to the extent practical, shall allow a person to monitor the meeting electronically from a remote location. The board may require the person making such a connection to pay for documented costs that the board incurs as a result of the additional connection.

If telephone or other electronic means is used to conduct a regular, special, or emergency meeting, the board shall provide notice of the regular meeting location, of the fact that some members may participate by telephone or other electronic means, and that a person may monitor the meeting electronically from a remote location. Any person monitoring the meeting electronically from a remote location may be required to pay documented costs incurred by the board as a result of the additional connection. The timing and method of providing notice is governed by section 13D.04.

Subd. 8.Complaints.

(a) The board shall promptly forward to the commissioner the substance of any complaint or communication it receives, whether written or oral, that alleges or implies a violation of a statute, rule, or order that the commissioner has the authority to enforce pertaining to the license or registration of any person authorized by the department to provide high pressure piping services, the performance or offering to perform high pressure piping services requiring licensure by an unlicensed person, or high pressure piping code compliance. Each complaint or communication that is forwarded to the commissioner shall be submitted on a form provided by the commissioner.

(b) The commissioner shall advise the board of the status of the complaint within 90 days after the board's written submission is received, or within 90 days after the board is provided with a written request for additional information or documentation from the commissioner or the commissioner's designee, whichever is later. The commissioner shall advise the board of the disposition of a complaint referred by the board within 180 days after the board's written submission is received. The commissioner shall annually report to the board a summary of the actions taken in response to complaints referred by the board.

Subd. 9.Data Practices Act.

The board is subject to chapter 13, the Minnesota Government Data Practices Act, and shall protect from unlawful disclosure data classified as not public.

Subd. 10.Official records.

The board shall make and preserve all records necessary to a full and accurate knowledge of its official activities in accordance with section 15.17.

History:

2007 c 140 art 4 s 61; art 10 s 10; art 13 s 4; 2008 c 337 s 32-34,64; 2017 c 68 art 1 s 24,26; 1Sp2017 c 7 s 8

326B.93 MS 2014 [Renumbered 326B.953]

PASSENGER BOATS AND MASTERS

326B.94 BOATS; MASTERS.

Subdivision 1.Boat.

"Boat" means any vessel navigating inland waters of the state that is propelled by machinery or sails and is carrying more than six passengers for hire.

Subd. 2.Number of passengers.

The department shall designate the number of passengers that each boat may safely carry, and no such boat shall carry a greater number than is allowed by the inspector's certificate.

Subd. 3.Annual permit.

The commissioner shall issue an annual permit to a boat for the purpose of carrying passengers for hire on the inland waters of the state provided the boat satisfies the inspection requirements of this section. A boat subject to inspection under this chapter shall be registered with the department and shall be inspected before a permit may be issued. No person shall operate a boat or cause a boat to be operated for the purpose of carrying passengers for hire on the inland waters of the state without a valid annual permit issued under this section. Boats operating with a current inspection certificate issued by the United States Coast Guard are exempt from the inspection requirements of this section.

Subd. 4.Examinations, licensing.

Every individual who operates a boat must hold a current master's license issued by the commissioner, unless the individual holds a valid, current charter boat captain's license issued by the United States Coast Guard. The commissioner shall develop and administer an examination for all masters of boats carrying passengers for hire on the inland waters of the state. If found qualified and competent to perform their duties as a master of a boat carrying passengers for hire, they shall be issued a license authorizing them to act as such on the inland waters of the state. All initial master's licenses shall be for two years. The commissioner shall in a manner determined by the commissioner, without the need for any rulemaking under chapter 14, phase in the renewal of master's licenses from one year to two years. By June 30, 2011, all renewed master's licenses shall be two-year licenses. Fees for the original issue and renewal of the license authorized under this section shall be pursuant to section 326B.092.

Subd. 5.Rules.

(a) The department shall prescribe rules for the inspection of the hulls, machinery, boilers, steam connections, firefighting apparatus, lifesaving appliances, and lifesaving equipment of all power boats navigating the inland waters of the state, which shall conform to the requirements and specifications of the United States Coast Guard in similar cases as provided in Code of Federal Regulations, titles 33 and 46, and COMDTINST M16672.2D, as applicable to inland waters; these rules shall have the force of law.

(b) For purposes of this subdivision, the term "COMDTINST M16672.2D" means United States Department of Homeland Security, United States Coast Guard, Navigation Rules: International-Inland, as forwarded by Commandant Instruction M16672.2D, dated March 25, 1999, with any corrections or revisions.

Subd. 6.Drugs, alcohol.

No master shall be under the influence of illegal drugs or alcohol when on duty.

History:

2007 c 140 art 9 s 26; 2009 c 78 art 5 s 26; 2010 c 287 s 1; 2010 c 347 art 3 s 53,76; 2010 c 385 s 6

BOILER INSPECTIONS; LICENSURE

326B.95 DEFINITIONS.

Subdivision 1.Scope.

The definitions in this section apply to sections 326B.95 to 326B.998.

Subd. 2.Authorized inspector.

"Authorized inspector" means a national board-commissioned inspector who has been examined and found qualified to inspect the construction and repair of boilers and pressure vessels, and who holds a current certificate of competency.

Subd. 3.Certificate of competency.

"Certificate of competency" means a certificate issued by the department to allow national board-commissioned inspectors to perform boiler and pressure vessel inspections within the state.

Subd. 4.Certificate of inspection.

"Certificate of inspection" means a sticker attached to the boiler or pressure vessel which documents the month and year of the inspection and the employer of the inspector performing the inspection.

Subd. 5.Certificate of registration.

"Certificate of registration" means a document that has been made available on the department's website that lists all registered boilers and pressure vessels at a location, including the last inspection date, the certificate expiration date, and the maximum allowable working pressure for each boiler or pressure vessel.

Subd. 6.High-pressure boiler.

"High-pressure boiler" means a boiler operating at a steam or other vapor pressure in excess of 15 psig, or a water or other liquid boiler in which the pressure exceeds 160 psig or the temperature exceeds 250 degrees Fahrenheit.

Subd. 7.Inspection due date.

"Inspection due date" means the last possible date that the inspection can be completed within the time limits in this chapter.

Subd. 8.Insurance company boiler inspector.

"Insurance company boiler inspector" means a national board-commissioned inspector who holds a current certificate of competency.

Subd. 9.Low-pressure boiler.

"Low-pressure boiler" means a boiler operating at a steam or other vapor pressure of 15 psig or less, or a water or other liquid boiler in which the pressure does not exceed 160 psig and the temperature does not exceed 250 degrees Fahrenheit.

Subd. 10.National board.

"National board" means the National Board of Boiler and Pressure Vessel Inspectors, which is an organization comprised of chief inspectors for the states, cities, and territories of the United States and provinces and territories of Canada.

Subd. 11.National board-commissioned inspector.

"National board-commissioned inspector" means an individual who has been examined and found qualified to inspect in-service boilers and pressure vessels by the national board, and who holds a current commission issued by the national board.

Subd. 12.National Board Inspection Code; NBIC.

"National Board Inspection Code" or "NBIC" means a three-part technical document that is written and published by the national board detailing the installation, inspection, and repair of boilers and pressure vessels.

Subd. 13.Operation.

"Operation" means the on-site act of manipulating, monitoring, and testing of boilers and their appurtenances by a properly licensed engineer or an apprentice under the direct supervision of the properly licensed engineer.

Subd. 14.Psig.

"Psig" means pounds per square inch gauge.

Subd. 15.Remote monitoring.

"Remote monitoring" means the act of viewing or overseeing the boiler or boiler plant operating parameters and conditions from a remote location.

Subd. 16.Repair.

"Repair" means the work necessary to restore a boiler or pressure vessel to a safe and satisfactory operating condition, as defined in National Board Inspection Code, part 3, section 9.

Subd. 17.State boiler inspector.

"State boiler inspector" means a national board-commissioned boiler inspector who holds a current certificate of competency and a current chief grade A boiler operator's license.

History:

2010 c 287 s 2; 2015 c 21 art 1 s 109

326B.952 [Repealed, 2010 c 287 s 19]

326B.953 INSPECTION PERSONNEL.

Subdivision 1.Inspectors.

The department may employ such inspectors and other persons as are necessary to efficiently perform the duties and exercise the powers imposed upon the department.

Subd. 2.Chief boiler inspector.

The commissioner shall appoint a chief boiler inspector who, under the direction and supervision of the commissioner, shall administer this chapter and the rules adopted under this chapter. The chief boiler inspector must:

(1) be licensed as a chief Grade A engineer; and

(2) possess a current commission issued by the National Board of Boiler and Pressure Vessel Inspectors.

The chief boiler inspector shall be the state of Minnesota representative on the National Board of Boiler and Pressure Vessel Inspectors, shall be the final interpretative authority of the rules adopted under this chapter, and shall perform other duties in administering this chapter and the rules adopted under this chapter as assigned by the commissioner. Any person aggrieved by a ruling of the chief boiler inspector may appeal the ruling in accordance with chapter 14.

History:

2007 c 140 art 9 s 25

326B.954 BOILER INSPECTOR LICENSE.

Each boiler inspector employed by the department shall be licensed in this state as a chief grade A engineer, and must hold a national board commission as a boiler inspector within 12 months of being employed as a boiler inspector by the department. An inspector shall not be interested in the manufacture or sale of boilers or steam machinery or in any article required or used in the construction of engines, boilers, or pressure vessels, or their appurtenances.

History:

(5475) RL s 2169; 1957 c 503 s 4; 1974 c 161 s 11; 1982 c 379 s 3; 2007 c 140 art 9 s 2,27; art 13 s 4; 2010 c 287 s 3

326B.956 HISTORICAL BOILERS.

Subdivision 1.Definition.

For the purpose of sections 326B.95 to 326B.998, the term "historical boiler" means a boiler that is used only for display and demonstration purposes. The terms "historical boiler," "show boiler," "steam farm traction engine," and "hobby boiler" are synonymous. In recognition of the historical significance of show boilers in maintaining a working reminder of Minnesota's agricultural, transportation, and lumber industries, show boilers and engines are considered to be historical artifacts.

Subd. 2.Inspection.

(a) Historical boilers shall be inspected every two years. All historical boilers shall be inspected by ultrasonic examination and hydrostatic testing, alternating the type of inspection every two years. Any historical boiler not previously inspected in Minnesota shall be subject to both ultrasonic examination and hydrostatic testing prior to operation unless the historical boiler has a current operating certificate under paragraph (d).

(b) Except as provided in paragraph (d), historical boilers must display a certificate of inspection issued by the department before use.

(c) Standards for inspection of historical boilers shall be those established by the National Board Inspection Code ANSI/NB23 and by the rules adopted by the department and as follows:

(1) the boiler may be subjected to other methods of nondestructive examination, at the owner's expense, as deemed necessary by the boiler inspector to determine soundness and safety of the boiler;

(2) if a historical boiler has any longitudinal cracks in riveted longitudinal seams, the vessel shall be sealed and not approved for use in Minnesota. If the historical boiler is jacketed, the jacket must be removed prior to inspection; and

(3) repairs and alterations made to historical boilers must be made pursuant to the National Board Inspection Code ANSI/NB34.

(d) If a historical boiler has not been inspected in Minnesota and has a current operating certificate issued by another state or Canadian province, then that historical boiler can be operated in Minnesota without inspection in Minnesota as long as:

(1) the chief boiler inspector has determined that the requirements for certification in the other state or Canadian province are equal to or greater than the requirements for certification in Minnesota;

(2) the historical boiler displays the certificate from the other state or Canadian province; and

(3) the historical boiler is not operated in Minnesota for more than two years without inspection in Minnesota.

Subd. 3.Inspection fees.

The fee for inspecting historical boilers shall be the hourly rate pursuant to section 326B.986, subdivision 4.

Subd. 4.Licenses.

When a historical boiler is in operation at any location that is open to the public, an individual licensed under this subdivision or exempt from licensure under this subdivision must be in attendance at the boiler at all times. A license to operate historical boilers shall be issued to an applicant who:

(1) is 16 years of age or older;

(2) has provided to the commissioner an affidavit attesting to the applicant's competence in operating historical boilers and attesting that the applicant has demonstrated the ability to perform each task on a list, developed and approved by the chief boiler inspector, of tasks associated with the operation of historical boilers. The affidavit shall be signed by a licensed historical boiler engineer or an engineer licensed as second class grade A or higher;

(3) has at least 50 hours of operating experience on the devices, eight hours of which must be operating the boiler under load, and up to 16 hours of which may be satisfied by attendance at a school of instruction in operating the devices;

(4) passes a written test for competence in operating the devices; and

(5) pays the required fee.

A license is valid for the lifetime of the licensee unless revoked for cause. A onetime fee pursuant to section 326B.986, subdivision 5, shall be charged for the license.

Subd. 5.Exemptions.

(a) Any licensed steam engineer may operate historical boilers, subject to the equipment and horsepower limitations set forth in section 326B.978, without obtaining a license under subdivision 4.

(b) Any individual who holds a current historical boiler operator license issued by another state or Canadian province may operate historical boilers in Minnesota if the chief boiler inspector has determined that the requirements under which the individual obtained licensure in the other state or Canadian province are equal to or greater than the requirements for an applicant making application in Minnesota for a historical boiler license.

Subd. 6.

[Repealed by amendment, 2010 c 287 s 4]

History:

1980 c 601 s 1; 1981 c 38 s 1; 1983 c 301 s 156; 1986 c 444; 1987 c 70 s 2,3; 1988 c 719 art 19 s 2-4; 1991 c 331 s 1; 1994 c 402 s 1; 1996 c 305 art 3 s 25,26; 1997 c 38 s 1-3; 1Sp2005 c 1 art 4 s 43,44; 2007 c 140 art 9 s 3,27; art 13 s 4; 2008 c 309 s 1; 2010 c 287 s 4; 2015 c 21 art 1 s 109

326B.958 INSPECTION AND REGISTRATION.

Subdivision 1.Inspection.

(a) Every owner, lessee, or other person having charge of boilers or pressure vessels subject to inspection under sections 326B.956 to 326B.998 shall cause them to be inspected by the department unless specifically excepted by section 326B.988 or 326B.99. Inspectors shall subject all boilers to a thorough internal and external examination according to the standards in sections 326B.964 and 326B.966.

(b) Anyone who installs a boiler must ensure that the boiler is inspected by the department after installation is complete and before the boiler is placed in operation. Inspection fees pursuant to section 326B.986 associated with this initial inspection are the responsibility of the installer.

(c) The owner of a boiler must ensure that the boiler is inspected at least annually after the initial inspection, except as provided in sections 326B.956 and 326B.96.

(d) The owner of a pressure vessel not specifically excepted by section 326B.988 must ensure that the pressure vessel is inspected at least every two years.

(e) The fees under section 326B.986 for inspections conducted by the department under paragraphs (c) and (d) shall be the responsibility of the owner of the boiler or pressure vessel.

Subd. 1a.Certificate of inspection.

After inspecting the boiler or pressure vessel, the boiler inspector shall document the condition of the boiler or pressure vessel. If the boiler or pressure vessel meets the inspection requirements in sections 326B.964 and 326B.966, the inspector shall attach a label or sticker to the boiler or pressure vessel indicating the month and year inspected and the name of the inspection agency. This label is the inspection certificate and shall indicate that the inspected boiler or pressure vessel is found to be safe and suitable for use. The boiler inspector shall directly attach a tag to a newly installed boiler that displays a unique identification number.

Subd. 1b.Defects in boilers or pressure vessels.

If, upon inspecting a boiler or pressure vessel, the boiler inspector determines that the boiler or pressure vessel does not meet the requirements in sections 326B.964 and 326B.966, the inspector shall notify the owner or operator in writing of any defect in the boiler or pressure vessel. The boiler or pressure vessel shall not be operated if the inspector determines that the boiler or pressure vessel is unsafe. The boiler or pressure vessel shall not be operated until these unsafe defects have been corrected and verified by the inspector. If the boiler inspector finds that a boiler is being operated by an unlicensed or improperly licensed person, operation of the boiler shall cease until all operators are properly licensed according to section 326B.978. If circumstances warrant continued operation, the boiler inspector may, at the discretion of the boiler inspector, give approval for continuing operation of the boiler for a specific period of time, not to exceed 30 days.

Subd. 2.Registration.

Every owner, lessee, or other person having charge of a boiler or pressure vessel subject to inspection under sections 326B.95 to 326B.998, except historical boilers under section 326B.956, shall register the boiler or pressure vessel with the department at the time of the initial inspection described in subdivision 1. The registration shall be renewed annually for each boiler or pressure vessel on record with the department.

Subd. 3.Certificate of registration.

The department shall issue an electronic certificate of registration that lists the registered boilers and pressure vessels at the location, expiration date of the certificate of registration, last inspection date of each registered boiler and pressure vessel, and maximum allowable working pressure for each registered boiler and pressure vessel. This certificate shall be available to be printed by the owner, lessee, or other person having charge of the registered boiler or pressure vessel.

History:

(5478) RL s 2172; 1957 c 503 s 6; 1982 c 379 s 5; 1987 c 70 s 4; 1989 c 71 s 1; 1Sp2005 c 1 art 4 s 45; 2007 c 140 art 9 s 4,27; art 13 s 4; 2010 c 287 s 5; 2015 c 21 art 1 s 109

326B.96 INSPECTION.

Subdivision 1.

[Repealed, 2010 c 287 s 19]

Subd. 2.Qualifying boiler.

(a) "Qualifying boiler" means a boiler of 200,000 pounds per hour or more capacity which has an internal continuous water treatment program approved by the department and which the commissioner has determined to be in compliance with paragraph (c).

(b) A qualifying boiler must be inspected at least once every 24 months internally and externally while not under pressure and at least once every 18 months externally while under pressure. If the inspector considers it necessary to conduct a hydrostatic test to determine the safety of a boiler, the test must be conducted under the direction of the owner, contractor, or user of the equipment under the supervision of an inspector.

(c) The owner of a qualifying boiler must keep accurate records showing the date and actual time the boiler is out of service, the reason or reasons therefor, and the chemical physical laboratory analysis of samples of the boiler water taken at regular intervals of not more than 48 hours of operation which adequately show the condition of the water, and any elements or characteristics of the water capable of producing corrosion or other deterioration of the boiler or its parts.

(d) If an inspector determines there are substantial deficiencies in equipment or in boiler water treatment operating procedures, inspections of a qualifying boiler may be required once every 12 months until the commissioner finds that the substantial deficiencies have been corrected.

History:

(5481) RL s 2175; 1957 c 503 s 8; 1982 c 379 s 7; 1989 c 71 s 2; 2007 c 140 art 9 s 5,27; art 13 s 4

326B.961 TRIENNIAL AUDITS AND TEAM LEADER CERTIFICATIONS.

Subdivision 1.Triennial audits; assignment; qualifications.

The chief boiler inspector shall assign a qualified ASME designee or team leader to perform triennial audits on ASME Code and national board stamp holders at the request of the stamp holder. The department shall maintain qualifications for ASME designees and national board team leaders in accordance with ASME and national board requirements.

Subd. 2.Fees.

The department's fee for performing ASME and national board triennial audits shall be the hourly rate pursuant to section 326B.986, subdivision 4.

History:

2010 c 183 s 20; 2010 c 287 s 6

326B.962 [Repealed, 2010 c 287 s 19]

326B.964 STANDARDS OF INSPECTION.

The engineering standards of boilers and pressure vessels for use in this state shall be those established by Minnesota Rules, chapter 5225, and by the current edition of and addenda to the ASME Code, the National Board Inspection Code, and the National Fire Protection Association's standard NFPA 85 (Boiler and Combustion Systems Hazards Code), as they apply to the construction, operation and care of, in-service inspection and testing, and controls and safety devices.

History:

1957 c 503 s 10; Ex1967 c 1 s 6; 1969 c 1149 s 1; 1973 c 238 s 1; 1982 c 379 s 9; 2007 c 140 art 9 s 7,27; art 13 s 4; 2010 c 287 s 7

326B.966 INSPECTION PROCEDURES AND STANDARDS OF REPAIRS.

The inspection procedures and requirements for the repair of boilers and pressure vessels for use in this state shall be those established by the most current edition of and addenda to the National Board Inspection Code and the rules adopted by the department.

History:

1982 c 379 s 10; 1988 c 719 art 19 s 5; 2007 c 140 art 9 s 8,27; art 13 s 4; 2010 c 287 s 8

326B.968 [Repealed, 2010 c 287 s 19]

326B.97 INSPECTION OF BOILERS AND PRESSURE VESSELS.

The owner, lessee, or other person having control of a boiler or pressure vessel shall allow inspectors full access to the boiler or pressure vessel. Every engineer operating a boiler shall assist the inspector during the examination and indicate to the inspector any known defects in the boilers, pressure vessels, steam engines, and turbines.

History:

(5486) RL s 2180; 1919 c 240 s 3; 1939 c 399; 1947 c 563 s 1; 1957 c 503 s 12; 1957 c 876 s 1; 1982 c 379 s 12; 1986 c 444; 2007 c 140 art 9 s 27; art 13 s 4; 2010 c 287 s 9

326B.972 LICENSE REQUIREMENT.

(a) To operate a boiler, steam engine, or steam turbine an individual must have received a license for the grade covering that boiler, steam engine, or steam turbine. Except for licenses described in section 326B.956 and except for provisional licenses described in paragraphs (d) to (g):

(1) all initial licenses shall be for two years;

(2) the commissioner shall in a manner determined by the commissioner, without the need for any rulemaking under chapter 14, phase in the renewal of licenses from one year to two years; and

(3) by June 30, 2011, all licenses shall be two-year licenses.

(b) For purposes of sections 326B.95 to 326B.998, "operation" means the act of manipulating and monitoring boilers or appurtenances for their intended purpose and to ensure safety, except that operation does not include remote monitoring of an automatic boiler. When a boiler is monitored from a remote location, the only function that may be performed remotely upon the boiler is an emergency shutdown in alarm situations.

(c) No individual under the influence of illegal drugs or alcohol may operate a boiler, steam engine, or steam turbine or monitor an automatic boiler.

(d) The commissioner may issue a provisional license to allow an employee of a high pressure boiler plant to operate boilers greater than 500 horsepower at only that boiler plant if:

(1) the boiler plant has a designated chief engineer in accordance with Minnesota Rules, part 5225.0410;

(2) the boiler plant employee holds a valid license as a second-class engineer, Grade A or B;

(3) the chief engineer in charge of the boiler plant submits an application to the commissioner on a form prescribed by the commissioner;

(4) the chief engineer in charge of the boiler plant and an authorized representative of the owner of the boiler plant both sign the application for the provisional license;

(5) the owner of the boiler plant has a documented training program with examination for boilers and equipment at the boiler plant to train and test the boiler plant employee; and

(6) if the application were to be granted, the total number of provisional licenses for employees of the boiler plant would not exceed the total number of properly licensed first-class engineers and chief engineers responsible for the safe operation of the boilers at the boiler plant.

(e) A public utility, cooperative electric association, generation and transmission cooperative electric association, municipal power agency, or municipal electric utility that employs licensed boiler operators who are subject to an existing labor contract may use a provisional licensee as an operator only if using the provisional licensee does not violate the labor contract.

(f) A provisional license is valid for 36 months from the date of issue, unless revoked before the expiration date. A provisional license may not be renewed.

(g) The commissioner may issue no more than two provisional licenses to any individual within a four-year period.

History:

1982 c 379 s 13; 2007 c 140 art 9 s 10,27; art 13 s 4; 2008 c 309 s 2; 2009 c 78 art 5 s 27; 2010 c 287 s 10; 2015 c 21 art 1 s 109

326B.974 SCHOOL ENGINEER.

Subdivision 1.License required.

Any custodial engineer employed by a school whose duties include the operation of a boiler shall be licensed pursuant to section 326B.978, to operate the particular class of boiler used in the school.

Subd. 2.School district training.

A school district shall allow to occur annually at least eight hours of training related to boiler operation to a licensee described in subdivision 1. The training must be administered by a licensed first or chief class engineer during the licensee's normal working hours. Two hours of the required training shall occur in the boiler room and must include demonstration of tasks associated with operating boilers. The tasks associated with operating boilers acceptable for the training must be from the list of approved tasks supplied by the chief boiler inspector. The administrator of the training shall receive training credit for time spent administering training pursuant to this subdivision.

History:

1982 c 379 s 14; 2007 c 140 art 9 s 27; art 13 s 4; 2010 c 183 s 21

326B.976 [Repealed, 2010 c 347 art 3 s 75]

326B.978 EXAMINATIONS; CLASSIFICATIONS; QUALIFICATIONS.

Subdivision 1.Engineers, classes.

Engineers shall be divided into four classes:

(1) Chief engineers; Grade A, Grade B, and Grade C.

(2) First class engineers; Grade A, Grade B, and Grade C.

(3) Second class engineers; Grade A, Grade B, and Grade C.

(4) Special engineers.

Subd. 2.Applications.

Any individual who desires an engineer's license shall submit an application on a written or electronic form prescribed by the commissioner with all fees required by section 326B.092.

Subd. 3.Examinations.

Each applicant for a license must pass an examination developed and administered by the commissioner. The examinations shall be of sufficient scope to establish the competency of the applicant to operate a boiler of the applicable license class and grade.

Subd. 4.

[Repealed, 2013 c 85 art 2 s 44]

Subd. 5.High- and low-pressure boilers.

For the purposes of this section and section 326B.97, high-pressure boilers shall mean boilers operating at a steam or other vapor pressure in excess of 15 psig, or a water or other liquid boiler in which the pressure exceeds 160 psig or a temperature of 250 degrees Fahrenheit.

Low-pressure boilers shall mean boilers operating at a steam or other vapor pressure of 15 psig or less, or a water or other liquid boiler in which the pressure does not exceed 160 psig or a temperature of 250 degrees Fahrenheit.

Subd. 6.Chief engineer, Grade A.

An individual seeking licensure as a chief engineer, Grade A, shall be at least 18 years of age and have experience which verifies that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of boilers, steam engines, and turbines and their appurtenances; and, before receiving a license, the applicant shall take and subscribe an oath attesting to at least five years actual experience in operating the boilers except as provided in subdivision 18, including at least two years' experience in operating the engines or turbines except as provided in subdivision 18.

Subd. 7.Chief engineer, Grade B.

An individual seeking licensure as a chief engineer, Grade B, shall be at least 18 years of age and have habits and experience which justify the belief that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of boilers and their appurtenances; and, before receiving a license, the applicant shall take and subscribe an oath attesting to at least five years' actual experience in operating those boilers except as provided in subdivision 18.

Subd. 8.Chief engineer, Grade C.

An individual seeking licensure as a chief engineer, Grade C, shall be at least 18 years of age and have habits and experience which justify the belief that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of low-pressure boilers and their appurtenances, and before receiving a license, the applicant shall take and subscribe an oath attesting to at least five years of actual experience in operating the boilers except as provided in subdivision 18.

Subd. 9.First-class engineer, Grade A.

An individual seeking licensure as a first-class engineer, Grade A, shall be at least 18 years of age and have experience which verifies that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of boilers, engines, and turbines and their appurtenances of not more than 500 horsepower or to operate as a shift engineer in a plant of unlimited horsepower. Before receiving a license, the applicant shall take and subscribe an oath attesting to at least three years actual experience in operating the boilers, including at least two years' experience in operating such engines or turbines except as provided in subdivision 18.

Subd. 10.First-class engineer, Grade B.

An individual seeking licensure as a first-class engineer, Grade B, shall be at least 18 years of age and have habits and experience which justify the belief that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of boilers of not more than 500 horsepower or to operate as a shift engineer in a plant of unlimited horsepower. Before receiving a license the applicant shall take and subscribe an oath attesting to at least three years' actual experience in operating the boilers except as provided in subdivision 18.

Subd. 11.First-class engineer, Grade C.

An individual seeking licensure as a first-class engineer, Grade C, shall be at least 18 years of age and have habits and experience which justify the belief that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of low-pressure boilers and their appurtenances of not more than 500 horsepower or to operate as a shift engineer in a low-pressure plant of unlimited horsepower. Before receiving a license, the applicant shall take and subscribe an oath attesting to at least three years' actual experience in operating the boilers except as provided in subdivision 18.

Subd. 12.Second-class engineer, Grade A.

An individual seeking licensure as a second-class engineer, Grade A, shall be at least 18 years of age and have experience which verifies that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of boilers, engines, and turbines and their appurtenances of not more than 100 horsepower or to operate as a shift engineer in a plant of not more than 500 horsepower, or to assist the shift engineer, under direct supervision, in a plant of unlimited horsepower. Before receiving a license the applicant shall take and subscribe an oath attesting to at least one year of actual experience in operating the boilers, including at least one year of experience in operating the engines or turbines except as provided in subdivision 18.

Subd. 13.Second-class engineer, Grade B.

An individual seeking licensure as a second-class engineer, Grade B, shall be at least 18 years of age and have habits and experience which justify the belief that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of boilers of not more than 100 horsepower or to operate as a shift engineer in a plant of not more than 500 horsepower or to assist the shift engineer, under direct supervision, in a plant of unlimited horsepower. Before receiving a license the applicant shall take and subscribe an oath attesting to at least one year of actual experience in operating the boilers except as provided in subdivision 16 or 18.

Subd. 14.Second-class engineer, Grade C.

An individual seeking licensure as a second-class engineer, Grade C, shall be at least 18 years of age and have habits and experience which justify the belief that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of low-pressure boilers and their appurtenances of not more than 100 horsepower or to operate as a shift engineer in a low-pressure plant of not more than 500 horsepower, or to assist the shift engineer, under direct supervision, in a low-pressure plant of unlimited horsepower. Before receiving a license, the applicant shall take and subscribe an oath attesting to at least one year of actual experience in operating the boilers except as provided in subdivision 18.

Subd. 15.Special engineer.

(a) An individual seeking licensure as a special engineer shall be at least 18 years of age and have habits and experience which justify the belief that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of boilers and their appurtenances of not more than 50 horsepower or to operate as a shift engineer in a plant of not more than 100 horsepower, or to serve as an apprentice in any plant under the direct supervision of the properly licensed engineer.

(b) An individual seeking licensure as a special engineer who is at least 16 years of age but less than 18 years of age must be enrolled in a course approved by the commissioner, and have habits and experience that justify the belief that the individual is competent to take charge of and be responsible for the safe operation and maintenance of all classes of boilers and their appurtenances of not more than 50 horsepower or to operate as a shift engineer in a plant of not more than 100 horsepower, or to serve as an apprentice in any plant under the direct supervision of the properly licensed engineer.

Subd. 16.Current boiler operators.

Any individual operating a boiler other than a steam boiler on or before April 15, 1982, shall be qualified for application for the applicable class license upon presentation of an affidavit furnished by an inspector and sworn to by the individual's employer or a chief engineer. Except as provided in subdivision 18, the applicant must have at least the number of years of actual experience specified for the class of license requested and pass the appropriate examination.

Subd. 17.Rating horsepower.

For the purpose of rating boiler horsepower for engineer license classifications only: ten square feet of heating surface shall be considered equivalent to one boiler horsepower for conventional boilers and five square feet of heating surface equivalent to one boiler horsepower for steam coil type generators.

Subd. 18.Educational offset.

Notwithstanding the experience requirements in subdivisions 6 to 16, the commissioner may by rule establish educational equivalencies that an applicant may meet instead of a portion of the specified operating experience.

Subd. 19.Applicability.

This section shall not apply to traction or hobby boiler engineer's licenses or provisional licenses.

History:

(5487) RL s 2181; 1919 c 113 s 1; 1919 c 240 s 4; 1947 c 563 s 2; 1957 c 503 s 13; 1957 c 876 s 2; 1965 c 49 s 1; 1973 c 725 s 28-35; 1974 c 406 s 41; 1982 c 379 s 15; 1986 c 444; 1988 c 719 art 19 s 6-8; 1Sp2005 c 1 art 4 s 47,48; 2007 c 140 art 9 s 12,27; art 13 s 4; 2008 c 309 s 3; 2010 c 347 art 3 s 54,55,76; 2010 c 385 s 6

326B.98 VERIFICATION OF CERTIFICATE.

In making an inspection of boilers and pressure vessels, inspectors may act jointly or separately. In all cases inspectors shall verify the certificate of registration to ensure that all registered boilers and pressure vessels other than historical boilers are inspected. Any boilers and pressure vessels that are no longer in service shall be removed from the certificate of registration according to rules adopted by the department.

History:

(5489) RL s 2183; 1957 c 503 s 15; 1982 c 379 s 17; 2007 c 140 art 9 s 27; art 13 s 4; 2010 c 287 s 11

326B.982 [Repealed, 2010 c 287 s 19]

326B.986 FEES FOR INSPECTION.

Subdivision 1.Fee amount; vessels operated on inland waters.

The fees for the inspection of the hull, boiler, machinery, and equipment of vessels operated on inland waters and that carry passengers for hire are as follows:

(1) annual operating permit and safety inspections shall be $200; and

(2) other inspections, including dry-dock inspections, boat stability tests, and plan reviews, are billed at the hourly rate set in subdivision 4.

Subd. 2.

[Repealed, 2010 c 347 art 3 s 75]

Subd. 3.Boiler and pressure vessel inspection fees.

The fees for the annual inspection of boilers and biennial inspection of pressure vessels are as follows:

(1) boiler inaccessible for internal inspection, $55;

(2) boiler accessible for internal inspection, $55;

(3) boiler internal inspection over 2,000 square feet heating surface shall be billed at the hourly rate set in subdivision 4;

(4) boiler accessible for internal inspection requiring one-half day or more of inspection time shall be billed at the hourly rate set in subdivision 4;

(5) pressure vessel for internal inspection via manhole, $35; and

(6) pressure vessel inaccessible for internal inspection, $35.

Subd. 4.Hourly rate.

The hourly rate for an inspection not set elsewhere in sections 326B.954 to 326B.998 is $80 per hour. Inspection time includes all time related to the inspection. Travel time, billed at the hourly rate, and travel expenses shall be billed for shop inspections, triennial audits, boat stability tests, hydrostatic tests of a boiler or pressure vessel, or any other inspection or consultation requiring a special trip.

Subd. 5.Boiler engineer license fees.

(a) For purposes of calculating license fees and renewal license fees required under section 326B.092:

(1) the boiler special engineer license is an entry level license;

(2) the following licenses are journeyworker licenses: first class engineer, Grade A; first class engineer, Grade B; first class engineer, Grade C; second class engineer, Grade A; second class engineer, Grade B; second class engineer, Grade C; and provisional license; and

(3) the following licenses are master licenses: boiler chief engineer, Grade A; boiler chief engineer, Grade B; boiler chief engineer, Grade C; boiler inspector certificate of competency; and traction or hobby boiler engineer.

(b) Notwithstanding section 326B.092, subdivision 7, paragraph (a), the license duration for steam traction and hobby engineer licenses are one year only for the purpose of calculating license fees under section 326B.092, subdivision 7, paragraph (b).

Subd. 6.National board inspectors.

The fee for an examination of an applicant for a National Board of Boiler and Pressure Vessels Inspectors commission is $100.

Subd. 7.Nuclear endorsement.

The fee for each examination of an applicant for a National Board of Boiler and Pressure Vessels commissioned inspectors nuclear endorsement is $100.

Subd. 8.Certificate of competency.

(a) The fee for issuance of the original certificate of competency is $85 for inspectors who did not pay the national board examination fee specified in subdivision 6, or $35 for inspectors who paid that examination fee. Each applicant for a certificate of competency must complete an interview with the chief boiler inspector before issuance of the certificate of competency.

(b) All initial certificates of competency shall be effective for more than one calendar year and shall expire on December 31 of the year after the year in which the application is made.

(c) All renewed certificates of competency shall be valid for two calendar years. The fee for renewal of the state of Minnesota certificate of competency is $70, and is due the day after the certificate expires.

Subd. 9.Boiler and pressure vessel registration fee.

The annual registration fee for boilers and pressure vessels in use and required to be inspected per section 326B.958 shall be $10 per boiler and pressure vessel.

Subd. 10.Late fee.

The commissioner shall assess a late fee of $100 for each invoice issued under subdivision 1, 3, or 4 that is not paid in full by the due date stated on the invoice.

History:

1957 c 503 s 17; 1959 c 586 s 1; 1969 c 1148 s 30-32; 1974 c 427 s 1,2; 1978 c 485 s 1-4; 1982 c 379 s 19; 1983 c 301 s 157; 1Sp1985 c 13 s 296; 1987 c 70 s 5; 1989 c 335 art 4 s 106; 1996 c 305 art 3 s 27; 1Sp2005 c 1 art 4 s 49; 2007 c 140 art 9 s 15,27; art 13 s 4; 2008 c 309 s 4; 2009 c 78 art 5 s 28-30; 2010 c 287 s 12-14; 2010 c 347 art 3 s 56,76; 2010 c 385 s 6; 2011 c 76 art 1 s 52; 1Sp2015 c 1 art 5 s 3,4; 2017 c 68 art 1 s 26; 1Sp2017 c 7 s 8; 2019 c 50 art 1 s 104

326B.988 EXCEPTIONS.

(a) The provisions of sections 326B.95 to 326B.998 shall not apply to:

(1) boilers and pressure vessels in buildings occupied solely for residence purposes with accommodations for not more than five families;

(2) railroad locomotives operated by railroad companies for transportation purposes;

(3) air tanks installed on the right-of-way of railroads and used directly in the operation of trains;

(4) boilers and pressure vessels under the direct jurisdiction of the United States;

(5) unfired pressure vessels having an internal or external working pressure not exceeding 15 psig with no limit on size;

(6) pressure vessels used for storage of compressed air not exceeding five cubic feet in volume and equipped with an ASME code stamped safety valve set at a maximum of 100 psig;

(7) pressure vessels having an inside diameter not exceeding six inches;

(8) every vessel that contains water under pressure, including those containing air that serves only as a cushion, whose design pressure does not exceed 300 psig and whose design temperature does not exceed 210 degrees Fahrenheit;

(9) boiler or pressure vessels located on farms used solely for agricultural or horticultural purposes; for purposes of this section, boilers used for mint oil extraction are considered used for agricultural or horticultural purposes, provided that the owner or lessee complies with the inspection requirements contained in section 326B.958;

(10) tanks or cylinders used for storage or transfer of liquefied petroleum gases;

(11) unfired pressure vessels in petroleum refineries;

(12) an air tank or pressure vessel which is an integral part of a passenger motor bus, truck, or trailer;

(13) hot water heating and other hot liquid boilers not exceeding a heat input of 750,000 BTU per hour;

(14) hot water supply boilers (water heaters) not exceeding a heat input of 500,000 BTU per hour, a water temperature of 210 degrees Fahrenheit, a nominal water capacity of 120 gallons, or a pressure of 160 psig;

(15) a laundry and dry cleaning press not exceeding five cubic feet of steam volume;

(16) pressure vessels operated full of water or other liquid not materially more hazardous than water, if the vessel's contents' temperature does not exceed 210 degrees Fahrenheit or a pressure of 200 psig;

(17) steam-powered turbines at papermaking facilities which are powered by steam generated by steam facilities at a remote location;

(18) manually fired boilers for model locomotive, boat, tractor, stationary engine, or antique motor vehicles constructed or maintained only as a hobby for exhibition, educational or historical purposes and not for commercial use, if the boilers have an inside diameter of 12 inches or less, or a grate area of two square feet or less, and are equipped with an ASME stamped safety valve of adequate size, a water level indicator, and a pressure gauge;

(19) any pressure vessel used as an integral part of an electrical circuit breaker;

(20) pressure vessels used for the storage of refrigerant if they are built to ASME code specifications, registered with the national board, and equipped with an ASME code-stamped pressure-relieving device set no higher than the maximum allowable working pressure of the vessel. This does not include pressure vessels used in ammonia refrigeration systems;

(21) pressure vessels used for the storage of oxygen, nitrogen, helium, carbon dioxide, argon, nitrous oxide, or other medical gas, provided the vessel is constructed to ASME or Minnesota Department of Transportation specifications and equipped with an ASME code-stamped pressure-relieving device. The owner of the vessels shall perform annual visual inspections and planned maintenance on these vessels to ensure vessel integrity;

(22) pressure vessels used for the storage of compressed air for self-contained breathing apparatuses;

(23) hot water heating or other hot liquid boilers vented directly to the atmosphere; and

(24) pressure vessels used for the storage of compressed air not exceeding 1.5 cubic feet (11.22 gallons) in volume with a maximum allowable working pressure of 600 psi or less.

(b) An engineer's license is not required for hot water supply boilers.

(c) An engineer's license and annual inspection by the department is not required for boilers, steam cookers, steam kettles, steam sterilizers or other steam generators not exceeding 100,000 BTU per hour input, 25 kilowatt, and a pressure of 15 psig.

(d) Electric boilers not exceeding a maximum working pressure of 50 psig, maximum of 30 kilowatt input or three horsepower rating shall be inspected as pressure vessels and shall not require an engineer license to operate.

History:

(5492) RL s 2186; 1919 c 240 s 7; 1955 c 817 s 1; 1957 c 503 s 1; 1Sp1981 c 4 art 1 s 92; 1982 c 379 s 20; 1987 c 70 s 6; 1987 c 382 s 1; 1991 c 331 s 2; 1992 c 436 s 1; 2007 c 140 art 9 s 16,27; art 13 s 4; 2009 c 2 s 1; 2010 c 287 s 15; 2014 c 305 s 27; 2015 c 21 art 1 s 109; 2016 c 189 art 7 s 38; 2018 c 182 art 1 s 91

326B.99 REPORT OF INSURER; EXEMPTION FROM INSPECTION.

Subdivision 1.Inspection required.

Any insurance company insuring boilers and pressure vessels in this state shall inspect each insured boiler or pressure vessel. Within 21 days after the inspection, the insurance company shall file an inspection report with the commissioner. The inspection report shall be on the applicable national board form. The inspection report must indicate who is the properly licensed engineer in charge of the boiler or pressure vessel, including the engineer's license grade, class, and telephone number. Such report shall be made annually for boilers and biennially for pressure vessels and must be submitted in the format required by the department.

Subd. 2.Exemption.

Every boiler or pressure vessel as to which any insurance company authorized to do business in this state has issued a policy of insurance, after the inspection thereof, is exempt from inspection by the department made under sections 326B.95 to 326B.998, except the initial inspection by the department under section 326B.958, subdivision 1, paragraph (b), as long as:

(1) the boiler or pressure vessel continues to be insured;

(2) the boiler or pressure vessel continues to be inspected in accordance with the inspection schedule in sections 326B.958 and 326B.96; and

(3) the person owning or operating the boiler or pressure vessel has an unexpired certificate of registration.

Subd. 3.Notice of insurance coverage.

The insurer shall notify the commissioner in writing of its policy to insure and inspect boilers and pressure vessels at a location within 30 days of the date coverage is provided.

Subd. 4.Notice of discontinued coverage.

The insurer shall notify the commissioner in writing, within 30 days of the effective date, of the discontinuation of insurance coverage of the boilers and pressure vessels at a location. This notice shall show the effective date when the discontinued policy takes effect.

Subd. 5.Penalties.

The commissioner shall assess upon the insurer a $50 penalty, per applicable boiler and pressure vessel, for failing to submit an inspection report or notify the commissioner of insurance coverage or discontinuation of insurance coverage as set forth in this section. The commissioner shall assess upon the insurer a penalty of $100, per applicable boiler and pressure vessel, for failing to conduct the required in-service inspection within 60 days after the inspection was due, or within 60 days of the date of coverage for boilers or pressure vessels that are overdue for inspection. The penalties in this subdivision may only be assessed for notice, reports, and inspections required during the period that the insurance coverage was in effect.

History:

(5493) 1919 c 240 s 8; 1957 c 503 s 18; 1959 c 148 s 1; 1969 c 1148 s 33; 1974 c 427 s 3; 1978 c 485 s 5; 1Sp1981 c 4 art 1 s 93; 1982 c 379 s 21,22; 1983 c 301 s 158; 1997 c 7 art 1 s 88; 1Sp2005 c 1 art 4 s 50; 2007 c 140 art 9 s 17-20,27; art 13 s 4; 2008 c 277 art 1 s 27; 2010 c 287 s 16; 2015 c 21 art 1 s 109; 2015 c 54 art 1 s 23

326B.992 VIOLATIONS BY INSPECTORS.

Every inspector who willfully certifies falsely regarding any boiler or its attachments, or pressure vessel, or the hull and equipments of any steam vessel, or who grants a license to any individual to act as engineer or master contrary to any provision of sections 326B.954 to 326B.998, is guilty of a misdemeanor. In addition to this punishment the inspector shall be removed from office forthwith.

History:

1957 c 503 s 20; 1979 c 102 s 13; 1Sp1981 c 4 art 1 s 94; 1982 c 379 s 23; 2007 c 140 art 9 s 21,27; art 13 s 4; 2008 c 277 art 1 s 28; 2011 c 76 art 1 s 53

326B.994 VIOLATIONS IN CONSTRUCTION; REPAIR; SALE.

Subdivision 1.Construction violation.

No person shall construct a boiler, boiler piping, or pressure vessel so as not to meet the minimum construction requirements of the ASME boiler and pressure vessel code, and the rules of the department.

Subd. 2.Repair violation.

A person who repairs a boiler or pressure vessel by welding or riveting must meet the minimum requirements established by the current edition of the National Board of Boiler and Pressure Vessel Inspectors inspection code and the rules of the department.

Subd. 3.Sale violation.

No manufacturer, dealer, or other person shall sell or offer for sale a boiler or pressure vessel that does not meet the minimum construction requirements of the ASME boiler and pressure vessel code and the rules of the department.

History:

1957 c 503 s 21; 1982 c 379 s 24; 2007 c 140 art 9 s 22,27; art 13 s 4; 2008 c 337 s 3; 2010 c 287 s 17

326B.996 [Repealed, 2010 c 287 s 19]

326B.998 PENALTY FOR OPERATORS.

(a) No person shall operate or cause to be operated a boiler or pressure vessel at a higher pressure than is indicated on the data plate attached to the boiler or pressure vessel.

(b) No master or other person having charge of the machinery of a boat used for the conveyance of passengers in the waters of this state, or engineer or other person having charge of a boiler, steam engine, or other apparatus for generating or employing steam, shall create or allow to be created any condition whereby human life is endangered. Every owner and lessee of a boat, boiler, steam engine, or other apparatus for generating or supplying steam who has knowledge of a condition whereby human life is endangered, or of circumstances which would cause such a condition, shall take prompt action to correct the condition or circumstances and eliminate the danger to human life.

(c) Any person who violates paragraph (a) or (b) is guilty of a gross misdemeanor.

History:

(10265) RL s 5003; 1982 c 379 s 26; 2007 c 140 art 9 s 27; art 13 s 4; 2010 c 287 s 18