|206.01||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.02||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.025||[Repealed, 1984 c 447 s 32]|
|206.026||[Repealed, 1984 c 447 s 32]|
|206.03||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.04||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.05||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.06||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.065||[Repealed, 1997 c 147 s 79]|
|206.07||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.075||[Repealed, 1984 c 447 s 32]|
|206.08||Subdivisions renumbered, repealed, or no longer in effect|
|206.09||MS 1983 Supp [Repealed, 1984 c 447 s 32]|
|206.095||[Repealed, 1984 c 447 s 32]|
|206.10||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.11||MS 1983 Supp [Repealed, 1984 c 447 s 32]|
|206.12||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.13||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.14||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.15||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.16||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.17||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.18||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.185||[Repealed, 1984 c 447 s 32]|
|206.19||Subdivisions renumbered, repealed, or no longer in effect|
|206.195||[Repealed, 1984 c 447 s 32]|
|206.20||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.21||Subdivisions renumbered, repealed, or no longer in effect|
|206.211||[Repealed, 1984 c 447 s 32]|
|206.212||[Repealed, 1967 c 437 s 10]|
|206.22||[Repealed, 1959 c 675 art 13 s 1]|
|206.23||MS 1982 [Repealed, 1984 c 447 s 32]|
|206.54||[Repealed, 1959 c 675 art 13 s 1]|
|206.55||MINNESOTA ELECTION LAW APPLIES.|
|206.57||EXAMINATION OF NEW VOTING SYSTEMS.|
|206.58||AUTHORIZATION FOR USE.|
|206.59||PAYMENT FOR VOTING SYSTEMS.|
|206.60||[Repealed, 1997 c 147 s 79]|
|206.63||[Repealed, 1997 c 147 s 79]|
|206.64||ACCESSIBILITY; INSTRUCTIONS; ASSISTANCE TO VOTERS.|
|206.68||[Repealed, 1997 c 147 s 79]|
|206.685||[Repealed, 1997 c 147 s 79]|
|206.69||[Repealed, 1997 c 147 s 79]|
|206.70||[Repealed, 1997 c 147 s 79]|
|206.71||[Repealed, 1997 c 147 s 79]|
|206.72||[Repealed, 1997 c 147 s 79]|
|206.73||[Repealed, 1997 c 147 s 79]|
|206.74||[Repealed, 1997 c 147 s 79]|
|206.75||[Repealed, 1997 c 147 s 79]|
|206.76||[Repealed, 1997 c 147 s 79]|
|206.77||[Repealed, 1997 c 147 s 79]|
|206.80||ELECTRONIC VOTING SYSTEMS.|
|206.805||STATE VOTING SYSTEMS CONTRACTS.|
|206.81||ELECTRONIC VOTING SYSTEMS; EXPERIMENTAL USE.|
|206.82||PREPARATION OF ELECTRONIC VOTING SYSTEM PROGRAMS AND PLANS.|
|206.83||TESTING OF VOTING SYSTEMS.|
|206.84||METHODS OF USING ELECTRONIC VOTING SYSTEMS.|
|206.845||BALLOT RECORDING AND COUNTING SECURITY.|
|206.85||OFFICIALS IN CHARGE OF COUNTING.|
|206.86||COUNTING ELECTRONIC VOTING SYSTEM RESULTS.|
|206.87||CANVASSING BOARD DUTIES.|
|206.88||PARTIAL RECOUNTS ON ELECTRONIC VOTING SYSTEMS.|
|206.89||POSTELECTION REVIEW OF VOTING SYSTEMS.|
|206.895||SECRETARY OF STATE MONITOR.|
|206.90||OPTICAL SCAN VOTING SYSTEMS.|
|206.91||VOTING MACHINES OPTIONS WORKING GROUP.|
"Assistive voting technology" means touch-activated screen, buttons, keypad, sip-and-puff input device, keyboard, earphones, or any other device used with an electronic ballot marker that assists voters to use an audio or electronic ballot display in order to cast votes.
"Audio ballot reader" means an audio representation of a ballot that can be used with other assistive voting technology to permit a voter to mark votes on a nonelectronic ballot.
"Automatic tabulating equipment" includes machines, resident firmware, and programmable memory units necessary to automatically examine and count votes designated on a ballot.
"Ballot" includes paper ballots, ballot cards, and the paper ballot marked by an electronic marking device.
"Ballot card" means a ballot which is marked so that votes may be counted by automatic tabulating equipment.
"Counting center" means a place selected by the governing body of a municipality where a central count electronic voting system is used for the automatic processing and counting of ballots.
"Electronic ballot display" means a graphic representation of a ballot on a computer monitor or screen on which a voter may make vote choices for candidates and questions for the purpose of marking a nonelectronic ballot.
"Electronic ballot marker" means equipment that is part of an electronic voting system that uses an electronic ballot display or audio ballot reader to mark a nonelectronic ballot with votes selected by a voter.
"Electronic voting system" means a system in which the voter records votes by means of marking a ballot, so that votes may be counted by automatic tabulating equipment in the polling place where the ballot is cast or at a counting center.
An electronic voting system includes automatic tabulating equipment; nonelectronic ballot markers; electronic ballot markers, including electronic ballot display, audio ballot reader, and devices by which the voter will register the voter's voting intent; software used to program automatic tabulators and layout ballots; computer programs used to accumulate precinct results; ballots; secrecy folders; system documentation; and system testing results.
"Manual marking device" means any approved device for directly marking a ballot by hand with ink, pencil, or other substance which will enable the ballot to be tabulated by means of automatic tabulating equipment.
"Question" means a statement of any constitutional amendment, local ordinance, charter amendment, or other proposition being submitted to the voters at an election.
"User list" means a list of the chief election officials of each county and municipality responsible for preparation of a program to be used with an electronic voting system or for administration of a counting center.
"Municipality" means city, town, or school district.
A vendor of an electronic voting system may apply to the secretary of state to examine the system and to report as to its compliance with the requirements of law and as to its accuracy, durability, efficiency, and capacity to register the will of voters. The secretary of state or a designee shall examine the system submitted and file a report on it in the Office of the Secretary of State. Examination is not required of every individual machine or counting device, but only of each type of electronic voting system before its adoption, use, or purchase and before its continued use after significant changes have been made in an approved system. The examination must include the ballot programming; electronic ballot marking, including all assistive technologies intended to be used with the system; vote counting; and vote accumulation functions of each voting system.
If the report of the secretary of state or the secretary's designee concludes that the kind of system examined complies with the requirements of sections 206.55 to 206.90 and can be used safely, the system shall be deemed approved by the secretary of state, and may be adopted and purchased for use at elections in this state. A voting system not approved by the secretary of state may not be used at an election in this state. The secretary of state may adopt permanent rules consistent with sections 206.55 to 206.90 relating to the examination and use of electronic voting systems.
The secretary of state may assess a fee to accompany the application to cover the actual and necessary costs for the examinations and licenses provided for in this section. The fee must be deposited in the state treasury. The expenses of administering this section must be paid from appropriations to the secretary of state.
Vendors of electronic voting systems shall certify to the secretary of state that they will not offer for sale a system which is not certified for use in Minnesota elections. The vendor shall furnish a bond in the amount of $5,000 along with the certification to the secretary of state conditioned on offering the equipment for sale in accordance with Minnesota election laws and any conditions of the approval of the equipment granted as provided in this section.
In federal and state elections held after December 31, 2005; in county, city, and school district elections held after December 31, 2007; and, except as provided in subdivision 5a, in township elections held after December 31, 2009, the voting method used in each polling place must include a voting system that is accessible for individuals with disabilities, including nonvisual accessibility for the blind and visually impaired in a manner that provides the same opportunity for access and participation, including privacy and independence, as for other voters.
(a) A town conducting an election not held in conjunction with any federal, state, county, or school district election is exempt from the requirements of subdivision 5 if the town has fewer than 500 registered voters, as determined by the secretary of state by June 1 of each year.
(b) A town that would otherwise satisfy the requirements of this subdivision is still required to comply with subdivision 5 at its next general town election if the voters at the preceding year's annual town meeting instruct the town to conduct elections in compliance with subdivision 5.
(c) If the secretary of state, after consultation with the Minnesota Association of Townships, county auditors, or other interested parties, determines that a town's share of the cost of compliance with subdivision 5 will not exceed $150 for an election, the town may not use the exemption under paragraph (a) and shall conduct elections under subdivision 5. In determining the town's cost of compliance, the secretary shall include any expense associated with programming, ballot preparation and printing, and the equipment costs directly related to compliance with subdivision 5.
(a) Beginning in 2009 and at least once every other year until 2016, the secretary of state shall consult with interested parties, including, but not limited to, members of the legislature, town officers, county election officials, the National Federation of the Blind, the Minnesota State Council on Disability, and the Disability Law Center regarding:
(1) options for full compliance with subdivision 5; and
(2) ongoing costs of compliance with subdivision 5 and methods of reducing those costs.
(b) Beginning January 15, 2010, and until January 15, 2017, the secretary of state shall report to the chairs and ranking minority members of the legislative committees and divisions with jurisdiction over elections policy and finance regarding the findings, discussions, and developments under paragraph (a).
In addition to the requirements in subdivision 1, a voting system must be certified by an independent testing authority approved by the secretary of state and conform to current standards for voting equipment issued by the Federal Election Commission or its successor, the Election Assistance Commission.
If the federal Election Assistance Commission has not established by January 1, 2006, standards for an electronic ballot marker or other voting system component that is required to enable a voting system to meet the requirements of subdivision 5, the secretary of state may certify the voting system on an experimental basis pending the completion of federal standards, notwithstanding subdivision 6. Within two years after the Election Assistance Commission issues standards for a voting system component used in a voting system authorized under this subdivision, the secretary of state must review or reexamine the voting system to determine whether the system conforms to federal standards.
1984 c 447 s 3; 1984 c 640 s 32; 1986 c 362 s 7; 1986 c 444; 1989 c 291 art 1 s 25; 1995 c 233 art 2 s 56; 1997 c 147 s 53; 2004 c 293 art 1 s 32,33; 2005 c 156 art 6 s 56; 2005 c 162 s 12-14; 1Sp2007 c 1 s 1; 2008 c 336 s 5-7
The governing body of a municipality, at a regular meeting or at a special meeting called for the purpose, may provide for the use of an electronic voting system in one or more precincts and at all elections in the precincts, subject to approval by the county auditor. The governing body shall disseminate information to the public about the use of a new voting system at least 60 days prior to the election and shall provide for instruction of voters with a demonstration voting system in a public place for the six weeks immediately prior to the first election at which the new voting system will be used.
No system may be adopted or used unless it has been approved by the secretary of state pursuant to section 206.57.
The governing body of a municipality may provide for the experimental use of an electronic voting system in one or more precincts without formal adoption of the system. Use of the system at an election is as valid for all purposes as if the system had been permanently adopted.
If the governing body of a municipality decides to use an electronic voting system, it shall, at a regular or special meeting held not less than 30 days before the election, prescribe suitable rules and instructions consistent with sections 206.55 to 206.90 for using the system and shall submit the rules and instructions to the secretary of state for approval. When approved, a printed copy of the rules and instructions must be posted prominently in the polling place and must remain open to inspection by the voters throughout election day.
The governing body of a county may provide for the use of an electronic voting system in one or more precincts of the county at all elections. The governing body of the municipality shall give approval before an electronic voting system may be adopted or used in the municipality under the authority of this section. No system may be adopted or used unless it has been approved by the secretary of state pursuant to section 206.57.
If a municipality adopts the use of an electronic voting system, the municipal clerk shall certify to the secretary of state within 30 days from the date of adoption that an electronic voting system will be used in the municipality and the date when use will commence.
Payment for an electronic voting system may be provided for in the manner deemed in the best interests of the political division adopting and purchasing it. A municipality or county may make payment by appropriating money from the general fund, by levying a tax in the same manner as other taxes are levied, or by issuing and selling bonds or other certificates of indebtedness, which must be a charge upon the municipality or county adopting and purchasing the electronic voting system. Bonds or other certificates of indebtedness may be issued by a majority vote of the governing body of the municipality or county adopting and purchasing an electronic voting system, notwithstanding any contrary provision contained in any home rule charter or law of this state.
The bonds or certificates of indebtedness issued may bear interest at a rate not exceeding the rate provided in section 475.55 and may be made payable at a time not exceeding 20 years from the date of issue, as determined by the resolution or ordinance authorizing the issue. The bonds or certificates of indebtedness may be issued exclusive of and in addition to any limit of indebtedness fixed by the charter of a municipality, or by laws governing a municipality or county, but the bonds or certificates of indebtedness may not be issued or sold at less than par and accrued interest on them.
The official charged with providing paper ballots when they are used shall provide all ballot cards, sample ballots, precinct summary statements, and other necessary supplies needed for electronic voting systems, except as otherwise provided by this section.
At general elections and primaries the county auditor of each county in which an electronic voting system is used shall provide all ballot cards and other necessary printed forms and supplies needed for the electronic voting system, including all forms needed for voting on candidates and questions, the ballots for which are required by the election laws to be provided by the state when paper ballots are used.
Candidates' names may be set in as large type as the length of the majority of names on the ballot permits. The remaining candidates' names may be set in smaller sizes of type as the length of each name requires, in order to fit the available space on the ballot card.
On the "State Partisan Primary Ballot" prepared for primary elections, and on the white ballot prepared for the general election, the order of the names of nominees or names of candidates for election shall be the same as required for paper ballots. More than one column or row may be used for the same office or party. Electronic ballot display and audio ballot readers must conform to the candidate order on the optical scan ballot used in the precinct.
The provisions of the election laws requiring the alternation of names of candidates must be observed as far as practicable by changing the order of the names on an electronic voting system in the various precincts so that each name appears on the machines or marking devices used in a municipality substantially an equal number of times in the first, last, and in each intermediate place in the list or group in which they belong. However, the arrangement of candidates' names must be the same on all voting systems used in the same precinct. If the number of names to be alternated exceeds the number of precincts, the election official responsible for providing the ballots, in accordance with subdivision 1, shall determine by lot the alternation of names.
If an electronic ballot marker is used with a paper ballot that is not an optical scan ballot card, the manner of alternation of candidate names on the paper ballot must be as prescribed for optical scan ballots in this subdivision.
The officials who prepare ballot cards shall provide each polling place with at least two sample ballots which are facsimiles of the card to be voted on in that precinct. The sample ballots may be either in full or reduced size. The sample ballots must be posted prominently in the polling place and must remain open to inspection by the voters throughout election day.
Each electronic voting system booth must be placed and protected so that it is accessible to only one voter at a time and is in full view of all the election judges and challengers at the polling place. The election judges shall admit one individual at a time to each booth after determining that the individual is eligible to vote. Voting by electronic voting system must be secret, except for voters who request assistance. A voter may remain inside the voting booth for the time reasonably required for the voter to complete the ballot. A voter who refuses to leave the voting booth after a reasonable amount of time, but not less than three minutes, must be removed by the election judges.
An individual who intentionally injures or attempts to injure or render ineffectual any component of an electronic voting system, or who violates any of the provisions of sections 206.55 to 206.90, is guilty of a felony.
An individual who violates any rules adopted by the secretary of state or by the governing body of a municipality where an electronic voting system is used, or who violates any of the provisions of sections 206.55 to 206.90, is guilty of a gross misdemeanor.
A vendor of electronic voting systems or related election services shall furnish the secretary of state with a sufficient bond conditioned on the performance of those machines, systems, or services in accordance with the Minnesota Election Law and any contract or agreement made with an election jurisdiction in Minnesota. The vendor bond required under section 206.57, subdivision 4, may serve as the performance bond required under this subdivision. The secretary of state shall send notice of the receipt or forfeiture of a bond under this subdivision to each official on the user list.
(a) An electronic voting system may not be employed unless it:
(1) permits every voter to vote in secret;
(2) permits every voter to vote for all candidates and questions for whom or upon which the voter is legally entitled to vote;
(3) provides for write-in voting when authorized;
(4) automatically rejects, except as provided in section 206.84 with respect to write-in votes, all votes for an office or question when the number of votes cast on it exceeds the number which the voter is entitled to cast;
(5) permits a voter at a primary election to select secretly the party for which the voter wishes to vote;
(6) automatically rejects all votes cast in a primary election by a voter when the voter votes for candidates of more than one party; and
(7) provides every voter an opportunity to verify votes recorded on the permanent paper ballot, either visually or using assistive voting technology, and to change votes or correct any error before the voter's ballot is cast and counted, produces an individual, discrete, permanent, paper ballot cast by the voter, and preserves the paper ballot as an official record available for use in any recount.
(b) An electronic voting system purchased on or after June 4, 2005, may not be employed unless it:
(1) accepts and tabulates, in the polling place or at a counting center, a marked optical scan ballot; or
(2) creates a marked optical scan ballot that can be tabulated in the polling place or at a counting center by automatic tabulating equipment certified for use in this state.
(a) The secretary of state, with the assistance of the commissioner of administration, shall establish one or more state voting systems contracts. The contracts should, if practical, include provisions for maintenance of the equipment purchased. The voting systems contracts must address precinct-based optical scan voting equipment, and ballot marking equipment for persons with disabilities and other voters. The contracts must give the state a perpetual license to use and modify the software. The contracts must include provisions to escrow the software source code, as provided in subdivision 2. Bids for voting systems and related election services must be solicited from each vendor selling or leasing voting systems that have been certified for use by the secretary of state. The contracts must be renewed from time to time.
(b) The secretary of state shall appoint an advisory committee, including representatives of the state chief information officer, county auditors, municipal clerks who have had operational experience with the use of electronic voting systems, and members of the disabilities community to advise the secretary of state in reviewing and evaluating the merits of proposals submitted from voting equipment vendors for the state contracts.
(c) Counties and municipalities may purchase or lease voting systems and obtain related election services from the state contracts. All counties and municipalities are members of the cooperative purchasing venture of the Department of Administration for the purpose of this section. For the purpose of township elections, counties must aggregate orders under contracts negotiated under this section for products and services and may apportion the costs of those products and services proportionally among the townships receiving the products and services. The county is not liable for the timely or accurate delivery of those products or services.
The contracts must require the voting system vendor to provide a copy of the source code for the voting system to an independent third-party evaluator selected by the vendor, the secretary of state, and the chairs of the major political parties. The evaluator must examine the source code and certify to the secretary of state that the voting system will record and count votes as represented by the vendor. Source code that is trade secret information must be treated as nonpublic information, in accordance with section 13.37. Each major political party may designate an agent to examine the source code to verify that the voting system will record and count votes as represented by the vendor; the agent must not disclose the source code to anyone else.
(a) The secretary of state may certify an electronic voting system for experimental use at an election prior to its approval for general use.
(b) Experimental use must be observed by the secretary of state or the secretary's designee and the results observed must be considered at any subsequent proceedings for certification for general use.
A program or programs for use in an election conducted by means of an electronic voting system or using an electronic ballot marker shall be prepared at the direction of the county auditor or municipal clerk who is responsible for the conduct of the election and shall be independently verified by a competent person designated by that official. The term "competent person" as used in this section means a person who can demonstrate knowledge as a computer programmer and who is other than and wholly independent of any person operating or employed by the counting center or the corporation or other preparer of the program. A test deck prepared by a competent person shall be used for independent verification of the program; it shall test the maximum digits used in totaling the returns and shall be usable by insertion during the tabulation process as well as prior to tabulation. A test deck must also be prepared using the electronic ballot marker program and must also be used to verify that all valid votes counted by the vote tabulator may be selected using the electronic ballot marker. The secretary of state shall adopt rules further specifying test procedures.
The municipal clerk in a municipality where an electronic voting system is used and the county auditor of a county in which an electronic voting system is used in more than one municipality and the county auditor of a county in which a counting center serving more than one municipality is located shall prepare a plan which indicates acquisition of sufficient facilities, computer time, and professional services and which describes the proposed manner of complying with section 206.80. The plan must be signed, notarized, and submitted to the secretary of state more than 60 days before the first election at which the municipality uses an electronic voting system. Prior to July 1 of each subsequent general election year, the clerk or auditor shall submit to the secretary of state notification of any changes to the plan on file with the secretary of state. The secretary of state shall review each plan for its sufficiency and may request technical assistance from the Office of Enterprise Technology or other agency which may be operating as the central computer authority. The secretary of state shall notify each reporting authority of the sufficiency or insufficiency of its plan within 20 days of receipt of the plan. The attorney general, upon request of the secretary of state, may seek a district court order requiring an election official to fulfill duties imposed by this subdivision or by rules promulgated pursuant to this section.
Before a contract is awarded to any vendor for preparation of a program for use with an electronic voting system, the vendor shall furnish the secretary of state with a sufficient bond conditioned on preparing the program in conformity with Minnesota Election Law and the instructions delivered to the vendor by the county auditor or municipal clerk who is responsible for the conduct of the election. The secretary of state shall send notice of the receipt or forfeiture of any such bond to each official on the user list. On or before March 15 of every even-numbered year the county auditor shall send to the secretary of state the current user list for the county.
Within 14 days before election day, the official in charge of elections shall have the voting system tested to ascertain that the system will correctly mark ballots using all methods supported by the system, including through assistive technology, and count the votes cast for all candidates and on all questions. Public notice of the time and place of the test must be given at least two days in advance by publication once in official newspapers. The test must be observed by at least two election judges, who are not of the same major political party, and must be open to representatives of the political parties, candidates, the press, and the public. The test must be conducted by (1) processing a preaudited group of ballots punched or marked to record a predetermined number of valid votes for each candidate and on each question, and must include for each office one or more ballot cards which have votes in excess of the number allowed by law in order to test the ability of the voting system tabulator and electronic ballot marker to reject those votes; and (2) processing an additional test deck of ballots marked using the electronic ballot marker for the precinct, including ballots marked using the electronic ballot display, audio ballot reader, and any assistive voting technology used with the electronic ballot marker. If any error is detected, the cause must be ascertained and corrected and an errorless count must be made before the voting system may be used in the election. After the completion of the test, the programs used and ballot cards must be sealed, retained, and disposed of as provided for paper ballots.
The officials in charge of elections shall determine procedures to instruct election judges and voters in the use of electronic voting system manual marking devices and the electronic ballot marker, including assistive voting technology.
The ballot information must be in the same order provided for paper ballots, except that the information may be in vertical or horizontal rows, or on a number of separate pages. The secretary of state shall provide by rule for standard ballot formats for electronic voting systems. Electronic ballot displays and audio ballot readers shall be in the order provided for on the optical scan ballot. Electronic ballot displays may employ zooms or other devices as assistive voting technology. Audio ballot readers may employ rewinds or audio cues as assistive voting technology.
Ballot cards may contain special printed marks as required for proper positioning and reading of the ballots by electronic vote counting equipment. Ballot cards must contain an identification of the precinct for which they have been prepared which can be read visually and which can be tabulated by the automatic tabulating equipment.
The official in charge of elections in each municipality where an electronic voting system is used shall have the voting systems put in order, set, adjusted, and made ready for voting when delivered to the election precincts. The official shall also provide each precinct with a container for transporting ballot cards to the counting location after the polls close. The container shall be of sturdy material to protect the ballots from all reasonably foreseeable hazards including auto collisions. The election judges shall meet at the polling place at least one hour before the time for opening the polls. Before the polls open the election judges shall compare the ballot cards used with the sample ballots, electronic ballot displays, and audio ballot reader furnished to see that the names, numbers, and letters on both agree and shall certify to that fact on forms provided for the purpose. The certification must be filed with the election returns.
A voter who spoils a ballot card or makes an error may return it to the election judges and obtain another. Except as otherwise provided in sections 206.55 to 206.90, the election judges shall conduct the election in the manner prescribed for precincts using paper ballots in chapters 204C and 204D.
The county auditor and municipal clerk must secure ballot recording and tabulating systems physically and electronically against unauthorized access. Except for wired connections within the polling place, ballot recording and tabulating systems must not be connected to or operated on, directly or indirectly, any electronic network, including a local area network, a wide-area network, the Internet, or the World Wide Web. Wireless communications may not be used in any way in a vote recording or vote tabulating system. Wireless, device-to-device capability is not permitted. No connection by modem is permitted.
Transfer of information from the ballot recording or tabulating system to another system for network distribution or broadcast must be made by disk, tape, or other physical means of communication, other than direct or indirect electronic connection of the vote recording or vote tabulating system.
After the close of the polls, the head election judge must create a printed record of the results of the election for that precinct. After the record has been printed, the head election judge in a precinct that employs automatic tabulating equipment may transmit the accumulated tally for each device to a central reporting location using a telephone, modem, Internet, or other electronic connection. During the canvassing period, the results transmitted electronically must be considered unofficial until the canvassing board has performed a complete reconciliation of the results.
The official in charge of elections in a municipality where an electronic voting system is used at a counting center must:
(a) be present or personally represented throughout the counting center proceedings;
(b) be responsible for acquiring sufficient facilities and personnel to ensure timely and lawful processing of votes;
(c) be responsible for the proper training of all personnel participating in counting center proceedings and deputize all personnel who are not otherwise election judges;
(d) maintain actual control over all proceedings and be responsible for the lawful execution of all proceedings in the counting center whether or not by experts;
(e) be responsible for assuring the lawful retention and storage of ballots and read-outs; and
(f) arrange for observation by the public and by candidates' representatives of counting center procedures by publishing the exact location of the counting center in a legal newspaper at least once during the week preceding the week of election and in the newspaper of widest circulation once on the day preceding the election, or once the week preceding the election if the newspaper is a weekly.
The official may make arrangements with news reporters which permit prompt reporting of election results but which do not interfere with the timely and lawful completion of counting procedures.
If a counting center serves more than one municipality, the county auditor of the county where the center is located is in sole charge of overall administration of the center and must:
(a) establish procedures to implement the timely and lawful completion of the counting center proceedings;
(b) coordinate training of all counting center personnel and require additional training as needed;
(c) ask the county attorney, at least 30 days prior to an election, whether circumstances require that the municipalities sharing the use of a counting center resolve their respective duties and financial responsibilities by execution of a joint powers agreement pursuant to section 471.59;
(d) coordinate, and if necessary, exercise the duties imposed by this section on the official in charge of elections in a municipality where an electronic voting system is used; and
(e) limit the number of ballots to be counted at a single counting center to no more than 100,000.
In precincts where an electronic voting system is used, as soon as the polls are closed the election judges shall secure the voting systems against further voting. They shall then open the ballot box and count the number of ballot cards or envelopes containing ballot cards that have been cast to determine that the number of ballot cards does not exceed the number of voters shown on the election register or registration file. If there is an excess, the judges shall seal the ballots in a ballot container and transport the container to the county auditor or municipal clerk who shall process the ballots in the same manner as paper ballots are processed in section 204C.20, subdivision 2, then enter the ballots into the ballot counter. The total number of voters must be entered on the forms provided. The judges shall next count the write-in votes and enter the number of those votes on forms provided for the purpose.
The judges shall place all voted ballot cards, defective ballots, and damaged ballots in the container provided for transporting them to the counting center. The container must be sealed and delivered immediately to the counting center by two judges who are not of the same major political party. The judges shall also deliver to the counting center in a suitable container the unused ballot cards, the spoiled ballot envelope, and the ballot envelopes issued to the voters and deposited during the day in the ballot box.
Proceedings at the counting center are open to the public. They are under the direction of the official in charge of elections in each municipality where an electronic voting system is used and must be under the observation of at least two election judges who are not of the same major political party. Only persons employed and authorized for the purpose may touch any ballot card, ballot container, or statement of absentee ballot results.
When the ballot cards arrive at a counting center where votes are counted by a multiple use computer, they must be given to the counting center election judges. For purposes of this subdivision a multiple use computer is automatic tabulating equipment which can perform functions other than counting votes. If the election judges at the precinct have determined that any ballot cards are not defective by reason of improper write-in votes, those ballot cards may be counted by the automatic tabulating equipment before inspection by the counting center election judges. The results of this preliminary tabulation may be made available to the public if the tabulation is clearly identified as unofficial.
After any preliminary tabulation has been made, the ballot cards must be returned to the counting center election judges who shall examine them for physical defects and prepare replacements, if necessary, as provided in subdivision 5.
If a ballot card is damaged or defective so that it cannot be counted properly by the automatic tabulating equipment, a true duplicate copy must be made of the damaged ballot card in the presence of two judges not of the same major political party and must be substituted for the damaged ballot card. Likewise, a duplicate ballot card must be made of a defective ballot card which may not include the votes for the offices for which it is defective. Duplicate ballot cards must be clearly labeled "duplicate," indicate the precinct in which the corresponding damaged or defective ballot was cast, bear a serial number which must be recorded on the damaged or defective ballot card, and be counted in lieu of the damaged or defective ballot card. If a ballot card is damaged or defective so that it cannot be counted properly by the automatic tabulating equipment, the ballot card must be tallied at the counting center by two judges not of the same major political party and the totals for all these ballot cards must be added to the totals for the respective precincts.
A final tabulation of ballots must be obtained from the automatic tabulating equipment after all damaged or defective cards have been replaced. The final tabulation, together with the returns of write-in and absentee votes and the precinct summary statements prepared in accordance with section 204C.24, constitute the official return of each precinct. Upon completion of the count the returns are open to the public. The automatic tabulating equipment must be programmed to provide a complete recapitulation of all ballots processed. It may be programmed to provide information in addition to that required in the official return of each precinct, if the officials in charge of elections deem that advisable in order to provide election statistics to evaluate the performance of the electronic voting system or other aspects of the election.
In a municipality where an electronic voting system is used the canvassing board shall be constituted and shall perform the same duties as provided in sections 204C.32, 204C.33, and 204C.39 on the canvassing of paper ballots.
The secretary of state may conduct a recount to verify the accuracy of vote counting and recording in one or more precincts in which an electronic voting system was used in the election. The results of the recount must be reported to the appropriate canvassing board. Time for notice of nomination, election, or contest for an office recounted pursuant to this section must begin upon certification of the results of the recount by the canvassing board.
For purposes of this section "postelection review official" means the county auditor, unless the county auditor designates the municipal clerk as the "postelection review official" within 24 hours after the canvass of the state general election.
At the canvass of the state primary, the county canvassing board in each county must set the date, time, and place for the postelection review of the state general election to be held under this section.
At the canvass of the state general election, the county canvassing boards must select the precincts to be reviewed by lot. The county canvassing board of a county with fewer than 50,000 registered voters must conduct a postelection review of a total of at least two precincts. The county canvassing board of a county with between 50,000 and 100,000 registered voters must conduct a review of a total of at least three precincts. The county canvassing board of a county with over 100,000 registered voters must conduct a review of a total of at least four precincts, or three percent of the total number of precincts in the county, whichever is greater. At least one precinct selected in each county must have had more than 150 votes cast at the general election.
The county auditor must notify the secretary of state of the precincts that have been chosen for review and the time and place the postelection review for that county will be conducted, as soon as the decisions are made. If the selection of precincts has not resulted in the selection of at least four precincts in each congressional district, the secretary of state may require counties to select by lot additional precincts to meet the congressional district requirement. The secretary of state must post this information on the office Web site.
The county canvassing board shall appoint the postelection review official as defined in subdivision 1. The postelection review must be conducted of the votes cast for president or governor; United States senator; and United States representative. The postelection review official may conduct postelection review of the votes cast for additional offices.
The postelection review must be conducted in public at the location where the voted ballots have been securely stored after the state general election or at another location chosen by the county canvassing board. The postelection review official for each precinct selected must conduct the postelection review and may be assisted by election judges designated by the postelection review official for this purpose. The party balance requirement of section 204B.19 applies to election judges designated for the review. The postelection review must consist of a manual count of the ballots used in the precincts selected and must be performed in the manner provided by section 204C.21. The postelection review must be conducted in the manner provided for recounts under section 204C.361 to the extent practicable. The review must be completed no later than two days before the meeting of the state canvassing board to certify the results of the state general election.
A comparison of the results compiled by the voting system with the postelection review described in this section must show that the results of the electronic voting system differed by no more than one-half of one percent from the manual count of the offices reviewed. Valid votes that have been marked by the voter outside the vote targets or using a manual marking device that cannot be read by the voting system must not be included in making the determination whether the voting system has met the standard of acceptable performance for any precinct.
(a) If the postelection review in one of the reviewed precincts reveals a difference greater than one-half of one percent, or greater than two votes in a precinct where 400 or fewer voters cast ballots, the postelection review official must, within two days, conduct an additional review of the races indicated in subdivision 3 in at least three precincts in the same jurisdiction where the discrepancy was discovered. If all precincts in that jurisdiction have been reviewed, the county auditor must immediately publicly select by lot at least three additional precincts for review. The postelection review official must complete the additional review within two days after the precincts are selected and report the results immediately to the county auditor. If the second review in any of the reviewed precincts also indicates a difference in the vote totals compiled by the voting system that is greater than one-half of one percent from the result indicated by the postelection review, or greater than two votes in a precinct where 400 or fewer voters cast ballots, the county auditor must conduct a review of the ballots from all the remaining precincts in the county for the races indicated in subdivision 3. This review must be completed and the results must be reported to the secretary of state within one week after the second review was completed.
(b) If the results from the countywide reviews from one or more counties comprising in the aggregate more than ten percent of the total number of persons voting in the election clearly indicate that an error in vote counting has occurred, the secretary of state must notify the postelection review official of each county in the district that they must conduct manual recounts of all the ballots in the district for the affected office using the procedure outlined in section 204C.35. The recount must be completed and the results reported to the appropriate canvassing board within two weeks after the postelection review official received notice from the secretary of state.
Upon completion of the postelection review, the postelection review official must immediately report the results to the county auditor. The county auditor must then immediately submit the results of the postelection review electronically or in writing to the secretary of state not later than two days before the State Canvassing Board meets to canvass the state general election. The secretary of state shall report the results of the postelection review at the meeting of the State Canvassing Board to canvass the state general election.
If the postelection review under this section results in a change in the number of votes counted for any candidate, the revised vote totals must be incorporated in the official result from those precincts.
If a voting system is found to have failed to record votes accurately and in the manner provided by the Minnesota Election Law, the voting system must not be used at another election until it has been examined and recertified by the secretary of state. If the voting system failure is attributable to either its design or to actions of the vendor, the vendor must forfeit the vendor bond required by section 206.57 and the performance bond required by section 206.66.
The costs of the postelection review required by this section must be allocated as follows:
(1) the governing body responsible for each precinct selected for review must pay the costs incurred for the review conducted under subdivision 2 or 5, paragraph (a);
(2) the vendor of the voting system must pay any costs incurred by the secretary of state to examine and recertify the voting system; and
(3) the secretary of state must reimburse local units of government for the costs of any recount required under subdivision 5, paragraph (b).
The appropriate canvass is not completed and the time for notice of a contest of election does not begin to run until all reviews under this section have been completed.
The secretary of state must monitor and evaluate election procedures in precincts subject to the audit provided for in section 206.89 in at least four precincts in each congressional district. The precincts must be chosen by lot by the State Canvassing Board at its meeting to canvass the state general election.
For the purposes of this section, "optical scan voting system" means an electronic voting system approved for use under sections 206.80 to 206.81 in which the voter records votes by marking with a pencil or other device, including an electronic ballot marker, a ballot on which the names of candidates, office titles, party designation in a partisan primary or election, and a statement of any question accompanied by the words "Yes" and "No" are printed.
To the extent possible, procedures for using an optical scan voting system must be the same as those used for other electronic voting systems, unless this section provides otherwise.
At a state or county election where an optical scan voting system will be in use, the county auditor may provide ballot cards meeting the requirements of this section in lieu of paper ballots otherwise required to be prepared by the county auditor. In an election jurisdiction where an optical scan voting system has been adopted, the election official may provide paper ballots prepared in the same format used for the voting system.
An optical scan voting system may be used for absentee voting. The county auditor may supply an appropriate marking instrument to the voter along with the ballot.
In instructing judges and voters under section 206.84, subdivision 1, officials in charge of election precincts using optical scan voting systems shall include instruction on the proper mark for recording votes on ballot cards marked with a pencil or other writing instrument and the insertion by the voter of the ballot card into automatic tabulating equipment that examines and counts votes as the ballot card is deposited into the ballot box.
Officials shall include instruction on the insertion by the voter of the ballot card into an electronic ballot marker that can examine votes before the ballot card is deposited into the ballot box.
In precincts using optical scan voting systems, a single ballot card on which all ballot information is included must be printed in black ink on white colored material except that marks not to be read by the automatic tabulating equipment may be printed in another color ink.
On the front of the ballot must be printed the words "Official Ballot" and the date of the election and lines for the initials of at least two election judges.
When optical scan ballots are used, the offices to be elected must appear in the following order: federal offices; state legislative offices; constitutional offices; proposed constitutional amendments; county offices and questions; municipal offices and questions; school district offices and questions; special district offices and questions; and judicial offices.
On optical scan ballots, the names of candidates and the words "yes" and "no" for ballot questions must be printed as close to their corresponding vote targets as possible.
The line on an optical scan ballot for write-in votes must contain the words "write-in, if any."
If a primary ballot contains both a partisan ballot and a nonpartisan ballot, the instructions to voters must include a statement that reads substantially as follows: "THIS BALLOT CARD CONTAINS A PARTISAN BALLOT AND A NONPARTISAN BALLOT. ON THE PARTISAN BALLOT YOU ARE PERMITTED TO VOTE FOR CANDIDATES OF ONE POLITICAL PARTY ONLY." If a primary ballot contains political party columns on both sides of the ballot, the instructions to voters must include a statement that reads substantially as follows: "ADDITIONAL POLITICAL PARTIES ARE PRINTED ON THE OTHER SIDE OF THIS BALLOT. VOTE FOR ONE POLITICAL PARTY ONLY." At the bottom of each political party column on the primary ballot, the ballot must contain a statement that reads substantially as follows: "CONTINUE VOTING ON THE NONPARTISAN BALLOT." The instructions in section 204D.08, subdivision 4, do not apply to optical scan partisan primary ballots. Electronic ballot displays and audio ballot readers must follow the order of offices and questions on the optical scan or paper ballot used in the same precinct, or the sample ballot posted for that precinct.
In precincts where an optical scan voting system is used, the number of voting booths must be sufficient to provide for the number of voters expected. Information needed to enable voters to mark ballot cards quickly and correctly must be posted in each voting booth.
The official in charge of elections in each municipality where an optical scan voting system is used shall have the electronic ballot marker that examines and marks votes on ballot cards and the automatic tabulating equipment that examines and counts votes as ballot cards are deposited into ballot boxes put in order, set, adjusted, and made ready for voting when delivered to the election precincts. Whenever a ballot card created by an electronic ballot marker certified by the secretary of state is rejected by an optical scan voting system, two election judges who are members of different major political parties shall transcribe the votes on the ballot rejected by the optical scan voting system pursuant to the procedures set forth in section 206.86, subdivision 5.
Automatic tabulating equipment and electronic ballot markers must be capable of examining a ballot card for defects and returning it to the voter before it is counted and deposited into the ballot box and must be programmed to return as a spoiled ballot a ballot card with votes for an office or question which exceed the number which the voter is entitled to cast and at a primary a ballot card with votes for candidates of more than one party.
In precincts using optical scan voting systems, the judges shall count the write-in votes and enter the number of those votes on forms provided for the purpose. When the write-in votes are recorded on a medium that cannot be examined for write-in votes by the automatic tabulating equipment or the automatic tabulating equipment does not reject, with respect to write-in votes, all votes for an office or question when the number of votes cast on it exceeds the number which the voter is entitled to count, all ballot envelopes or other medium on which write-in votes have been recorded must be serially numbered, starting with the number one and the same number must be placed on the ballot card of the voter. The judges shall compare the write-in votes with the votes cast on the ballot card. If the total number of votes for any office exceeds the number allowed by law, a notation to that effect must be entered on the back of the ballot card and the card must be returned to the counting center in an envelope marked "defective ballots"; however, valid votes on ballot cards containing invalid votes must be counted as provided in section 206.86, subdivision 5.
When the write-in votes are recorded on ballot cards that can be examined for write-in votes by the automatic tabulating equipment and the automatic tabulating equipment rejects all votes for an office or question when the number of votes cast on it exceeds the number which the voter is entitled to cast, the judges shall examine the ballot cards with write-in votes and count the valid write-in votes.
1986 c 381 s 1; 1987 c 175 s 15; 1989 c 291 art 1 s 28; 1993 c 223 s 22; 1994 c 646 s 22; 1997 c 147 s 70,71; 1998 c 254 art 1 s 64; 2000 c 467 s 31; 2004 c 293 art 2 s 42; 2005 c 162 s 29-33; 2006 c 242 s 36
(a) A working group is hereby established to investigate and recommend to the legislature requirements for additional options for voting equipment that complies with the requirements of section 301 of the Help America Vote Act, Public Law 107-252, to provide private and independent voting for individuals with disabilities.
The working group must be cochaired by representatives of the Minnesota Disability Law Center and Citizens for Election Integrity - Minnesota.
(b) The working group must convene its first meeting by June 30, 2006, and must report to the legislature by February 15, 2007.
(c) The working group must include, but is not limited to:
(1) the disability community;
(2) the secretary of state;
(3) county and local election officials;
(4) major and minor political parties;
(5)(i) one member of the senate majority caucus and one member of the senate minority caucus appointed by the Subcommittee on Committees of the Committee on Rules and Administration; and
(ii) one member of the house of representatives majority caucus and one member of the house of representatives minority caucus appointed by the speaker;
(6) nonpartisan organizations;
(7) at least one individual with computer security expertise and knowledge of elections; and
(8) members of the public, other than vendors of election equipment, selected by consensus of the other members, including representatives of language and other minorities.
(d) Members of the working group will be selected by:
(1) a representative of the Office of the Secretary of State;
(2) a representative of the county election officials;
(3) the cochairs; and
(4) two legislators representing each party.
Official Publication of the State of Minnesota
Revisor of Statutes