IRC Section R314.5.11 is amended to read as follows:
R314.5.11 Sill plate and headers. Foam plastic shall be permitted to be spray-applied to a sill plate and header (rim joist) without thermal barrier subject to all of the following:
1. The maximum thickness of the foam plastic shall not exceed 5-1/2 inches (139.5 mm).
2. The foam plastic shall have a flame spread index of 25 or less and an accompanying smoke developed index of 450 or less when tested in accordance with ASTM E 84.
February 23, 2009
Copyright © 2009 by the Office of the Revisor of Statutes, State of Minnesota. All rights reserved.
700 State Office Building, 100 Rev. Dr. Martin Luther King Jr. Blvd., St. Paul, MN 55155 ♦ Phone: (651) 296-2868 ♦ TTY: 1-800-627-3529 ♦ Fax: (651) 296-0569