The commissioner has the powers reasonable and necessary to effectively exercise the authority granted by this chapter.
The commissioner shall:
(1) regulate the drilling, construction, modification, repair, and sealing of wells and borings;
(2) examine and license well contractors; persons constructing, repairing, and sealing bored geothermal heat exchangers; persons modifying or repairing well casings, well screens, or well diameters; persons constructing, repairing, and sealing drive point wells or dug wells; persons constructing, repairing, and sealing dewatering wells; persons sealing wells; persons installing well pumps or pumping equipment; and persons excavating or drilling holes for the installation of elevator borings or hydraulic cylinders;
(3) register and examine monitoring well contractors;
(4) license explorers engaged in exploratory boring and examine individuals who supervise or oversee exploratory boring;
(5) after consultation with the commissioner of natural resources and the Pollution Control Agency, establish standards for the design, location, construction, repair, and sealing of wells and borings within the state; and
(6) issue permits for wells, groundwater thermal devices, bored geothermal heat exchangers, and elevator borings.
The commissioner shall establish procedures for application, approval, and issuance of permits by rule.
The commissioner may inspect, collect water samples, and have access, at all reasonable times, to a well or boring site, including wells or borings drilled, sealed, or repaired.
The commissioner shall adopt rules including:
(1) issuance of licenses for:
(i) qualified well contractors, persons modifying or repairing well casings, well screens, or well diameters;
(ii) persons constructing, repairing, and sealing drive point wells or dug wells;
(iii) persons constructing, repairing, and sealing dewatering wells;
(iv) persons sealing wells;
(v) persons installing well pumps or pumping equipment;
(vi) persons constructing, repairing, and sealing bored geothermal heat exchangers; and
(vii) persons constructing, repairing, and sealing elevator borings;
(2) issuance of registration for monitoring well contractors;
(3) establishment of conditions for examination and review of applications for license and registration;
(4) establishment of conditions for revocation and suspension of license and registration;
(5) establishment of minimum standards for design, location, construction, repair, and sealing of wells and borings to implement the purpose and intent of this chapter;
(6) establishment of a system for reporting on wells and borings drilled and sealed;
(7) establishment of standards for the construction, maintenance, sealing, and water quality monitoring of wells in areas of known or suspected contamination;
(8) establishment of wellhead protection measures for wells serving public water supplies;
(9) establishment of procedures to coordinate collection of well and boring data with other state and local governmental agencies;
(10) establishment of criteria and procedures for submission of well and boring logs, formation samples or well or boring cuttings, water samples, or other special information required for and water resource mapping; and
(11) establishment of minimum standards for design, location, construction, maintenance, repair, sealing, safety, and resource conservation related to borings, including exploratory borings as defined in section 103I.005, subdivision 9.
The commissioner shall charge a nonrefundable application fee of $235 to cover the administrative cost of processing a request for a variance or modification of rules adopted by the commissioner under this chapter.
1989 c 326 art 3 s 3; 1990 c 597 s 21-23; 1991 c 355 s 9-12; 1994 c 557 s 19; 1996 c 305 art 2 s 21; 1997 c 203 art 2 s 4; 1999 c 153 s 4,5; 1Sp2001 c 9 art 1 s 3; 2002 c 379 art 1 s 113; 2005 c 106 s 16,17; 1Sp2005 c 4 art 6 s 2; 2007 c 147 art 16 s 2; 1Sp2011 c 9 art 2 s 5; 2013 c 108 art 12 s 108
Copyright © 2015 by the Revisor of Statutes, State of Minnesota. All rights reserved.