(a) A manufacturer shall operate four distribution facilities, which may include the manufacturer's single location for cultivation, harvesting, manufacturing, packaging, and processing but is not required to include that location. A manufacturer is required to begin distribution of medical cannabis from at least one distribution facility by July 1, 2015. All distribution facilities must be operational and begin distribution of medical cannabis by July 1, 2016. The distribution facilities shall be located based on geographical need throughout the state to improve patient access. A manufacturer shall disclose the proposed locations for the distribution facilities to the commissioner during the registration process. A manufacturer shall operate only one location where all cultivation, harvesting, manufacturing, packaging, and processing shall be conducted. Any additional distribution facilities may dispense medical cannabis and medical cannabis products but may not contain any medical cannabis in a form other than those forms allowed under section 152.22, subdivision 6, and the manufacturer shall not conduct any cultivation, harvesting, manufacturing, packaging, or processing at an additional distribution facility site. Any distribution facility operated by the manufacturer is subject to all of the requirements applying to the manufacturer under sections 152.22 to 152.37, including, but not limited to, security and distribution requirements.
(b) A medical cannabis manufacturer shall contract with a laboratory approved by the commissioner, subject to any additional requirements set by the commissioner, for purposes of testing medical cannabis manufactured by the medical cannabis manufacturer as to content, contamination, and consistency to verify the medical cannabis meets the requirements of section 152.22, subdivision 6. The cost of laboratory testing shall be paid by the manufacturer.
(c) The operating documents of a manufacturer must include:
(1) procedures for the oversight of the manufacturer and procedures to ensure accurate record keeping; and
(2) procedures for the implementation of appropriate security measures to deter and prevent the theft of medical cannabis and unauthorized entrance into areas containing medical cannabis.
(d) A manufacturer shall implement security requirements, including requirements for protection of each location by a fully operational security alarm system, facility access controls, perimeter intrusion detection systems, and a personnel identification system.
(e) A manufacturer shall not share office space with, refer patients to a health care practitioner, or have any financial relationship with a health care practitioner.
(f) A manufacturer shall not permit any person to consume medical cannabis on the property of the manufacturer.
(g) A manufacturer is subject to reasonable inspection by the commissioner.
(i) A medical cannabis manufacturer may not employ any person who is under 21 years of age or who has been convicted of a disqualifying felony offense. An employee of a medical cannabis manufacturer must submit a completed criminal history records check consent form, a full set of classifiable fingerprints, and the required fees for submission to the Bureau of Criminal Apprehension before an employee may begin working with the manufacturer. The bureau must conduct a Minnesota criminal history records check and the superintendent is authorized to exchange the fingerprints with the Federal Bureau of Investigation to obtain the applicant's national criminal history record information. The bureau shall return the results of the Minnesota and federal criminal history records checks to the commissioner.
(j) A manufacturer may not operate in any location, whether for distribution or cultivation, harvesting, manufacturing, packaging, or processing, within 1,000 feet of a public or private school existing before the date of the manufacturer's registration with the commissioner.
(k) A manufacturer shall comply with reasonable restrictions set by the commissioner relating to signage, marketing, display, and advertising of medical cannabis.
(a) A manufacturer of medical cannabis shall provide a reliable and ongoing supply of all medical cannabis needed for the registry program.
(b) All cultivation, harvesting, manufacturing, packaging, and processing of medical cannabis must take place in an enclosed, locked facility at a physical address provided to the commissioner during the registration process.
(c) A manufacturer must process and prepare any medical cannabis plant material into a form allowable under section 152.22, subdivision 6, prior to distribution of any medical cannabis.
(a) A manufacturer shall require that employees licensed as pharmacists pursuant to chapter 151 be the only employees to distribute the medical cannabis to a patient.
(b) A manufacturer may dispense medical cannabis products, whether or not the products have been manufactured by the manufacturer, but is not required to dispense medical cannabis products.
(c) Prior to distribution of any medical cannabis, the manufacturer shall:
(1) verify that the manufacturer has received the registry verification from the commissioner for that individual patient;
(2) verify that the person requesting the distribution of medical cannabis is the patient, the patient's registered designated caregiver, or the patient's parent or legal guardian listed in the registry verification using the procedures described in section 152.11, subdivision 2d;
(3) assign a tracking number to any medical cannabis distributed from the manufacturer;
(4) ensure that any employee of the manufacturer licensed as a pharmacist pursuant to chapter 151 has consulted with the patient to determine the proper dosage for the individual patient after reviewing the ranges of chemical compositions of the medical cannabis and the ranges of proper dosages reported by the commissioner;
(5) properly package medical cannabis in compliance with the United States Poison Prevention Packing Act regarding child-resistant packaging and exemptions for packaging for elderly patients, and label distributed medical cannabis with a list of all active ingredients and individually identifying information, including:
(i) the patient's name and date of birth;
(ii) the name and date of birth of the patient's registered designated caregiver or, if listed on the registry verification, the name of the patient's parent or legal guardian, if applicable;
(iii) the patient's registry identification number;
(iv) the chemical composition of the medical cannabis; and
(v) the dosage; and
(6) ensure that the medical cannabis distributed contains a maximum of a 30-day supply of the dosage determined for that patient.
(d) A manufacturer shall require any employee of the manufacturer who is transporting medical cannabis or medical cannabis products to a distribution facility to carry identification showing that the person is an employee of the manufacturer.
Each manufacturer shall report to the commissioner on a monthly basis the following information on each individual patient for the month prior to the report:
(1) the amount and dosages of medical cannabis distributed;
(2) the chemical composition of the medical cannabis; and
(3) the tracking number assigned to any medical cannabis distributed.