Skip to main content Skip to office menu Skip to footer
Capital IconMinnesota Legislature
Office of the Revisor of Statutes

Office of the Revisor of Statutes

4725.0150 INCORPORATIONS BY REFERENCE AND ABBREVIATIONS.

This part indicates documents, specifications, and standards that are incorporated by reference in this chapter. This material is not subject to frequent change and is available from the source listed, for loan or inspection from the Minnesota Department of Health, or through the Minitex interlibrary loan system. To borrow or inspect a reference, email the Minnesota Department of Health Well Management section at health.wells@state.mn.us, or go to Search Minnesota Department of Health Library and Beyond (www.minnesotadepartmentofhealthlibrary.on.worldcat.org/discovery). The abbreviations listed in parenthesis after the source name are used in this chapter.

A.

American Association of State Highway and Transportation Officials (AASHTO), 341 National Press Building, Washington, D.C. 20004.

(1)

AASHTO Standard H20-44, "Standard Specifications for Highway Bridges," 17th Edition, 2002, part 3.7.2.

(2)

AASHTO Standard M306-04, "Standard Specification for Drainage, Sewer, Utility, and Related Castings."

B.

American Petroleum Institute (API), 1220 L Street Northwest, Washington, DC 20005-4070.

(1)

Specification 13A-04, "API Specification for Drilling Fluid Materials," 16th Edition.

(2)

API Standard 5L-04, "Specification for Line Pipe."

C.

American National Standards Institute (ANSI), 25 West 43rd Street, New York, New York 10036. ANSI Schedule 5 and Schedule 40, "Dimensions of Welded and Stainless Steel Pipe" as contained in ASA Standard B36.19 - 1965, "Welded and Seamless Wrought Steel Pipe."

D.

American Society of Mechanical Engineers, ASME International, Three Park Avenue, New York, NY 10016-5990, USA, ASME B36.10M-2000, "Welded and Seamless Wrought Steel Pipe."

E.

ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.

(1)

ASTM A53/A53M-04a, "Standard Specifications for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated Welded and Seamless."

(2)

ASTM A589-96 (2001), Types I, II, and III, "Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe."

(3)

ASTM A312/A312M-04b, "Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes."

(4)

ASTM C150-04a, "Standard Specification for Portland Cement."

(5)

ASTM C494/C494M-04, "Standard Specification for Chemical Admixtures for Concrete."

(6)

ASTM C595, "Standard Specification for Blended Hydraulic Cements."

(7)

ASTM D2466-02, "Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40."

(8)

ASTM D2487-00, "Standard Classification of Soils for Engineering Purposes (Unified Soil Classification System)."

(9)

ASTM D2683-14, "Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing."

(10)

ASTM D3035-15, "Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter."

(11)

ASTM F480-02, "Standard Specification for Thermoplastic Water Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40, and SCH 80."

(12)

ASTM F714-13, "Standard Specification for Polyethylene (PE) Pipe (DR-PR) Based on Outside Diameter."

(13)

ASTM F876-20, "Standard Specification for Crosslinked Polyethylene (PEX) Tubing."

(14)

ASTM F877-20, "Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems."

(15)

ASTM F1055-16, "Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing."

(16)

ASTM F1807-19b, "Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing."

(17)

ASTM F1960-19a, "Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing."

(18)

ASTM F2080-19, "Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe."

(19)

ASTM F2620-19, "Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings."

F.

American Water Works Association, 6666 West Quincy Avenue, Denver, CO 80235, ANSI/AWWA C219-01, "Bolted, Sleeve-Type Couplings for Plain-End Pipe."

G.

National Fire Protection Association, 1 Batterymarch Park, P.O. Box 9101, Quincy, MA 02269-9101, NFPA 30, "Flammable and Combustible Liquids Code, 2015 Edition."

H.

NSF International, 789 Dixboro Road, P.O. Box 130140, Ann Arbor, Michigan 48113.

(1)

ANSI/NSF 14-2003, "Plastics Piping System Components and Related Materials."

(2)

ANSI/NSF 60-2018, "Drinking Water Treatment Chemicals - Health Effects."

(3)

ANSI/NSF 61-2003e, "Drinking Water System Components - Health Effects."

(4)

NSF White BookTM - Nonfood Compounds Listing Directory.

I.

Sims, P.K. and Morey, G.B., "Geology of Minnesota: A Centennial Volume," pages 459-473, "Paleozoic Lithostratigraphy of Southeastern Minnesota" by George Austin, 1972.

J.

United States Department of Agriculture, Agricultural Handbook Number 18, Soil Survey Manual pages 136 to 140, October 1993.

History:

17 SR 2773; 33 SR 211; 45 SR 986; 48 SR 447

Published Electronically:

January 30, 2024

Official Publication of the State of Minnesota
Revisor of Statutes