Skip to main content Skip to office menu Skip to footer
Capital IconMinnesota Legislature

Office of the Revisor of Statutes

4725.1833 VERTICAL HEAT EXCHANGER CONSTRUCTION PERMITS.

This part applies to the construction of vertical heat exchangers.

A.

A vertical heat exchanger must not be constructed, or have piping installed or removed below the frost line, until a permit has been issued by the commissioner to the well contractor or limited well/boring contractor licensed to construct vertical heat exchangers.

B.

The well contractor or vertical heat exchanger contractor must submit to the commissioner a vertical heat exchanger permit application on a form provided by the commissioner. The application must be legible and signed by the well contractor or vertical heat exchanger contractor and the property owner or property owner's agent.

C.

A permit application must be completed for each vertical heat exchanger and must include:

(1)

the name and license number of the well contractor or vertical heat exchanger contractor;

(2)

the name and address of the owner of the property on which the vertical heat exchanger will be installed;

(3)

the township number, range number, section and one quartile, and the property street address if assigned, of the proposed vertical heat exchanger;

(4)

a plan diagram showing the location of the vertical heat exchanger borings, property lines, and structures on the property;

(5)

the geological materials expected to be encountered by the borings;

(6)

the number, diameter, and depth of all bore holes drilled to install the vertical heat exchanger piping;

(7)

the grout materials and grouting method;

(8)

the type of heat transfer fluid to be used; and

(9)

the system operating pressure.

D.

The vertical heat exchanger must be constructed within 18 months of the date the permit is issued.

History:

17 SR 2773; 18 SR 1222; 25 SR 1207; 33 SR 211

Published Electronically:

September 2, 2008

Official Publication of the State of Minnesota
Revisor of Statutes