2008 Minnesota Statutes

299G.14 GLAZING MATERIAL; LABELING REQUIRED.

Subdivision 1.Permanent labeling; identification; standard.

Each lite of safety glazing material manufactured, distributed, imported, or sold for use in hazardous locations, or installed in such a location within this state shall be permanently labeled by such means as etching, sandblasting, firing of ceramic material, hot-die stamping, transparent pressure sensitive labels, or by other suitable means. The label shall identify the seller, manufacturer, fabricator, or installer, the nominal thickness and the type of safety glazing material, and the fact that said material meets the test requirements of the American National Standards Institute Standard Z-97.1-1972.

The label must be legible and visible after installation.

Subd. 2.Limited use.

Such safety glazing labeling shall not be used on other than safety glazing materials.

History:

1974 c 53 s 2