Skip to main content Skip to office menu Skip to footer
Minnesota Legislature

Office of the Revisor of Statutes

515A.2-110 CONDOMINIUM PLATS.
(a) Condominium plats are a part of the declaration. The condominium plat shall contain
a certification by a registered professional land surveyor or registered professional architect,
as to the parts of the plat prepared by each, that the condominium plat accurately depicts all
information required by this section. The portions of the condominium plat depicting the
dimensions of the portions of the condominium described in paragraphs (b)(3), (8), (9), (10), and
(11), may be prepared by either a land surveyor or an architect. The other portions of the plat
must be prepared only by a land surveyor. All measurements must be undertaken in accordance
with good professional practice. The certification must indicate that the work was undertaken
by or under the supervision of the certifying architect or land surveyor. Certification by the
architect or land surveyor does not constitute a guaranty or warranty of the nature, suitability, or
quality of construction of the condominium.
(b) Each condominium plat shall show:
(1) the number of the condominium and the boundaries and dimensions of the land included
in the condominium;
(2) the dimensions and location of all existing structural improvements and roadways;
(3) the intended location and dimensions of any contemplated common element
improvements to be constructed within the condominium labeled either "MUST BE BUILT" or
"NEED NOT BE BUILT";
(4) the location and dimensions of any additional real estate, labeled as such;
(5) the extent of any encroachments by or upon any portion of the condominium;
(6) the location and dimensions of all recorded easements within the condominium serving
or burdening any portion of the condominium;
(7) the distance between noncontiguous parcels of real estate;
(8) the location and dimensions of limited common elements, including porches, balconies
and patios, other than limited common elements described in section 515A.2-102(2) and (4);
(9) the location and dimensions of the vertical boundaries of each unit and that unit's
identifying number;
(10) the location and dimensions of the horizontal unit boundaries with reference to
established or assumed datum and that unit's identifying number;
(11) any units which may be converted by the declarant to create additional units or common
elements (section 515A.2-115) identified separately.
(c) When adding additional real estate (section 515A.2-111), the declarant shall record
supplemental condominium plats for that real estate conforming to the requirements of subsection
(b). If less than all additional real estate is being added, the supplemental condominium plats shall
also show the location and dimensions of the remaining portion.
(d) If a declarant subdivides or converts any unit into two or more units, common elements
or limited common elements (section 515A.2-115), the declarant shall record an amendment to
the condominium plat showing the location and dimensions of any new units, common elements
and limited common elements thus created.
History: 1980 c 582 art 2 s 515.2-110; 1986 c 342 s 7; 1986 c 444; 1987 c 387 s 5