Minnesota Administrative Rules

8250.1810 FORMAT OF BALLOTS FOR OPTICAL SCAN SYSTEMS.

Subpart 1.

Ballot form.

The optical scan ballot shall be prepared in a sufficient number to enable the clerks to comply with Minnesota Statutes, section 204B.29. The ballot shall be prepared and printed as soon as practicable, but in no event less than 46 days before an election unless otherwise specified in statute. Ballots for distribution in the polling place must be shrink-wrapped in quantities of 25, 50, or 100.

The ballot shall be printed with black ink on white paper. The ballot shall be printed so as to be easily legible, with suitable lines for divisions between candidates, offices, instructions, and other matter proper to be printed on the ballot.

Each ballot must have printed on it both the name of the precinct and an electronically readable precinct identifier or ballot style indicator. A ballot style used in more than one precinct may have the names of all precincts in which it is used printed on the ballot. If multiple ballots styles are to be used in the same precinct for precincts split by school districts, each ballot style must include the precinct name and applicable school district number. Only the electronically readable precinct identifier or ballot style indicator is required on a presidential only or federal only absentee ballot.

Subp. 2.

Primary ballot form.

Items A to F apply to primary ballots.

A.

On the partisan primary ballot, the names of the political parties that head the political party columns must be printed in uppercase in as large as practicable but no smaller than 14-point bold face type and must be shaded with a screen of 30 percent. When a party does not have candidates within a given precinct, the party headings are to remain on top of each column, regardless of whether the party has a contest on the given ballot.

B.

If a partisan primary ballot also includes a nonpartisan primary section, the heading of the nonpartisan section of the ballot must be printed white on black.

C.

Pursuant to Minnesota Statutes, section 206.90, subdivision 6, the instructions in Minnesota Statutes, section 204D.08, do not apply to optical scan partisan primary ballots.

D.

If a partisan primary ballot also includes a nonpartisan primary section on the same side of the ballot, a bold line must divide the partisan section of the ballot from the nonpartisan section of the ballot.

E.

If a partisan primary ballot has political party columns on both sides of the ballot, the instruction in subpart 13 for two-sided ballots must not be used on the ballot.

F.

If a partisan primary ballot contains both a partisan ballot and a nonpartisan ballot, the instructions to voters must include a statement that reads substantially as follows: "THIS BALLOT CARD CONTAINS A PARTISAN BALLOT AND A NONPARTISAN BALLOT. ON THE PARTISAN BALLOT YOU ARE PERMITTED TO VOTE FOR CANDIDATES OF ONE POLITICAL PARTY ONLY." If a primary ballot contains political party columns on both sides of the ballot, the instructions to voters must include a statement that reads substantially as follows: "ADDITIONAL POLITICAL PARTIES ARE PRINTED ON THE OTHER SIDE OF THIS BALLOT. VOTE FOR ONE POLITICAL PARTY ONLY." At the bottom of each political party column on the primary ballot, the ballot must contain a statement that reads substantially as follows: "CONTINUE VOTING ON THE NONPARTISAN BALLOT." These statements must be printed in uppercase in as large as practicable but no smaller than 10-point type.

Subp. 3.

Ballot heading.

At the top of a ballot containing both partisan and nonpartisan offices, the applicable words "STATE GENERAL ELECTION BALLOT" or "STATE PARTISAN PRIMARY BALLOT" and "STATE AND COUNTY NONPARTISAN PRIMARY BALLOT" shall be printed. At the top of a primary ballot containing only partisan offices, the words "STATE PRIMARY BALLOT" shall be printed. At the top of a ballot containing only nonpartisan offices, the words "GENERAL ELECTION BALLOT" or "PRIMARY ELECTION BALLOT" shall be printed, except for first-class cities which may use an optional heading. At the top of a ballot containing questions only, the words "SPECIAL ELECTION BALLOT" shall be printed.

When a county, municipal, school district, or hospital district election is held other than in conjunction with a federal or state office, the applicable words "COUNTY ELECTION BALLOT," "CITY ELECTION BALLOT," "TOWN ELECTION BALLOT," "SCHOOL DISTRICT BALLOT," or "HOSPITAL DISTRICT BALLOT" shall be printed.

The name of the jurisdiction preparing the ballot may be added within the heading in no smaller than 8-point type. The date of the election must be printed within the heading in no smaller than 8-point type.

The ballot heading must be printed in uppercase in as large as practicable but no smaller than 18-point type.

On the front of the ballot the words "OFFICIAL BALLOT" must be printed in uppercase in as large as practicable but no smaller than 10-point bold type and the word "Judge" in upper and lowercase in as large as practicable but no smaller than 10-point type with lines for initials of at least two election judges.

Subp. 4.

Instructions to voters.

Under the heading at the top of each side of the ballot, the words "INSTRUCTIONS TO VOTERS:" must be printed in uppercase bold in as large as practicable but no smaller than 12-point bold type. The words "To vote, completely fill in the oval(s) next to your choice(s) like this: (R)." or a similar wording or mark if a different target shape is used by the electronic voting equipment must follow and be printed in upper and lowercase in as large as practicable but no smaller than 8-point bold face type.

Immediately under each office title and district identified, one of the following instructions must be printed in uppercase and bold face in as large as practicable but no smaller than 8-point type:

VOTE FOR ONE TEAM

VOTE FOR ONE

VOTE FOR UP TO ....... followed by the number of candidates to be elected.

Subp. 5.

Order and form of office types.

When more than one of the following types of offices is on the ballot, the offices must appear on the ballot in the following order and must be identified as follows in uppercase in as large as practicable but no smaller than 14-point bold face type:

FEDERAL OFFICES

STATE OFFICES

CONSTITUTIONAL AMENDMENTS

COUNTY OFFICES

COUNTY QUESTIONS

CITY OFFICES

CITY QUESTIONS

TOWN OFFICES

TOWN QUESTIONS

SCHOOL DISTRICT OFFICES

SCHOOL DISTRICT QUESTIONS

SPECIAL DISTRICT OFFICES

SPECIAL DISTRICT QUESTIONS

JUDICIAL OFFICES

The name or the number of the appropriate municipality, school district, or special district may be added directly under the office types listed in this subpart.

Subp. 6.

Order and form of offices.

The offices must appear on the ballot in the following order and must be identified as follows in uppercase letters and printed in uppercase in as large as practicable but no smaller than 10-point bold face type. The office titles must either be shaded with a screen of ten percent or less, or printed white on black:

"PRESIDENT AND VICE-PRESIDENT"

"UNITED STATES SENATOR"

"UNITED STATES REPRESENTATIVE"

"STATE SENATOR"

"STATE REPRESENTATIVE"

"GOVERNOR AND LIEUTENANT GOVERNOR"

"SECRETARY OF STATE"

"STATE AUDITOR"

"ATTORNEY GENERAL"

"COUNTY COMMISSIONER"

"COUNTY AUDITOR"

"COUNTY TREASURER"

"COUNTY AUDITOR-TREASURER"

"COUNTY RECORDER"

"COUNTY SHERIFF"

"COUNTY ATTORNEY"

"COUNTY SURVEYOR"

"COUNTY CORONER"

"COUNTY PARK COMMISSIONER"

"SOIL AND WATER CONSERVATION DISTRICT SUPERVISOR" or "CONSERVATION DISTRICT SUPERVISOR" where allowed by statute

"COUNTY QUESTIONS"

"MAYOR"

"COUNCIL MEMBER"

"CITY CLERK"

"CITY TREASURER"

"CITY QUESTIONS"

"TOWN SUPERVISOR"

"TOWN CLERK"

"TOWN TREASURER"

"TOWN QUESTIONS"

"SCHOOL BOARD MEMBER"

"SCHOOL DISTRICT QUESTIONS"

"HOSPITAL DISTRICT BOARD MEMBER"

"HOSPITAL DISTRICT QUESTIONS"

Judicial offices must follow special district offices and appear in the following order:

CHIEF JUSTICE - SUPREME COURT

ASSOCIATE JUSTICE - SUPREME COURT

JUDGE - COURT OF APPEALS

JUDGE - DISTRICT COURT

"United States" may be abbreviated as "U.S." Directly underneath the titles of the offices of United States representative and state senator and representative must be printed in uppercase letters and numbers the district (for example: "DISTRICT 6") that the person elected will represent. A single vote must be cast for president and vice-president and for governor and lieutenant governor.

If on the same ballot with other offices of the same type, offices elected at large must include "AT LARGE" following the office identification and must be listed before other offices of the same type elected by district.

Where nonjudicial offices are designated by number, those offices must be listed in numerical order and must be printed in uppercase letters or numbers directly under the title of the office. Where judicial offices are designated by number, the seats must be listed in numerical order, except that for judicial offices for a specific court for which there is only one candidate filed must appear after all other judicial offices for that same court.

If an office is not to be filled at a general election, the office must not appear on the ballot. If two of the offices have been combined into one office, the combined office must take the place of the first office listed in this subpart.

Any county offices not listed must follow the office of soil and water conservation district supervisor on the ballot and must be listed in the order determined by the county auditor.

Subp. 7.

Order and form of candidate names.

The name of each candidate as filed on the affidavit of candidacy shall be printed at right angles to the length of the ballot. On state primary ballots for nomination to a partisan or nonpartisan office, and on state general election ballots and judicial nonpartisan general election ballots, the names of each candidate shall be rotated with the names of the other candidates pursuant to part 8220.0825. If the number of candidates for an office is equal to or less than the number to be elected, no rotation of candidate names is required and the official preparing the ballot shall determine the position of the candidates by lot. The candidate names must be printed in uppercase in as large as practicable but no smaller than 10-point type. The name of the candidate must be aligned as close to the vote target as possible. Below the name of each candidate for a partisan office must appear in the designation in not more than three words of the party or principle the candidate represents. Words used in the name of a major political party as defined in Minnesota Statutes, section 200.02, subdivision 7, may not be used to identify the party of a candidate of any other party. This prohibition does not apply to the word "independent," if it is used in the name of a major political party. The word "nonpartisan" may not be used in the designation of any candidate for a partisan office. The party or principle designation, if applicable, must be printed under the candidate name in upper and lower case letters in as large as practicable but no smaller than 8-point type.

Subp. 8.

Order and form of write-in candidate lines.

On general election ballots, below the name of the last candidate for each office shall be placed as many blank lines as there are offices of that kind to be filled, and on the blank lines the voter may write the name of persons not printed on the ballot for whom the voter desires to vote. When no person has filed for an office to be filled, the title and identification of the office shall be printed on the ballot with as many blank lines below as there are offices to be filled. Above or below each write-in line the words "write-in, if any" must appear in lowercase in as large as practicable but no smaller than 6-point type and must be aligned next to the vote target.

Subp. 9.

Order of candidates for partisan office in general election.

At the same time that the secretary of state certifies the names of nominees under Minnesota Statutes, section 204C.32, subdivision 2, the secretary of state shall certify to the county auditors the order in which the names of the candidates representing the political parties as defined in Minnesota Statutes, section 200.02, subdivision 7, must appear for every partisan office on the ballot. Candidates nominated by petition must appear on the ballot beneath the names of the candidates of the political parties as defined in Minnesota Statutes, section 200.02, subdivision 7, and in the order determined by lot by the secretary of state. The secretary of state shall draw lots once by political party or principle. To draw the lot, a candidate who has used the word "independent" to designate the candidate's party or principle must be identified by the word "independent" followed by the candidate's surname. If more than one candidate is nominated by petition for the same office within the same political party or principle, the secretary of state shall draw a supplementary lot within that party or principle by candidate surname to determine the order of those candidates. The order of political parties or principles determined by the drawing of lots applies to all partisan offices on the ballot.

Subp. 10.

Order and form of ballot questions.

Ballot questions must be printed after offices of the same jurisdiction. Directly after the office type required in subpart 2, the words "To vote for a question, fill in the oval next to the word 'YES' on that question. To vote against a question, fill in the oval next to the word 'NO' on that question." or "To vote for a question, complete the arrow next to the word 'YES' on that question. To vote against a question, complete the arrow next to the word 'NO' on that question." must be printed in upper and lower case and no smaller than 8-point type. When more than one question is on the ballot for a given jurisdiction, each ballot question must be designated by a number and must be preceded by the words "COUNTY QUESTION," "CITY QUESTION," "TOWN QUESTION," "SCHOOL DISTRICT QUESTION," "HOSPITAL DISTRICT QUESTION," and the number assigned to the question in uppercase letters in as large as practicable but no smaller than 10-point bold face type. The name and/or number of the jurisdiction that the question will represent may be printed directly under the heading of the question. The question heading and numbers (where applicable) must be shaded with a screen of ten percent or less or printed white on black. A clerk, county auditor, or appropriate governing body shall provide a title for each question printed on the ballot. The title must not contain more than ten words and must not be used on the ballot until it has been approved by the jurisdiction's legal counsel. The title must be printed in uppercase and bold face in as large as practicable but no smaller than 10-point type and must be printed in the same section as the body of the question to which it refers. The body of the question must be printed in upper and lowercase letters in as large as practicable but no smaller than 8-point type. The words "YES" and "NO" must be aligned as close as possible to the vote targets and must be printed in uppercase and bold face in as large as practicable but no smaller than 10-point type.

Subp. 11.

Instructions, order and form of constitutional amendments.

For a ballot containing a constitutional amendment, the following statement shall be printed beneath the heading "CONSTITUTIONAL AMENDMENT" in upper and lowercase and no smaller than 8-point type: "Failure to vote on a constitutional amendment will have the same effect as voting no on the amendment." A bold dividing line running the width of the ballot column shall be immediately below the statement. The words "To vote for a proposed constitutional amendment, fill in the oval next to the word 'YES' on that question. To vote against a proposed constitutional amendment, fill in the oval next to the word 'NO' on that question." or "To vote for a proposed constitutional amendment, complete the arrow next to the word 'YES' on that question. To vote against a proposed constitutional amendment, complete the arrow next to the word 'NO' on that question." must follow and be printed in upper and lower case and no smaller than 8-point type. If more than one constitutional amendment is on the ballot, each constitutional amendment must be designated by a number and must be preceded by the word "AMENDMENT" and the number assigned to the amendment and the title required by Minnesota Statutes, section 204D.15, subdivision 1, must be printed in uppercase letters in as large as practicable but no smaller than 10-point bold face type and must be shaded with a screen of ten percent. The body of the question must be printed upper and lowercase letters in as large as practicable but no smaller than 8-point type. The words "YES" and "NO" must be aligned as close as possible to the vote targets and must be printed in uppercase and bold face in as large as practicable but no smaller than 10-point type.

Subp. 12.

Vote targets.

The target used to indicate to the voters where to mark their votes may be either a horizontal oval next to the candidate name or similar target if used by certified equipment. The target may be highlighted or outlined in a color that does not affect the ability of the ballot counter to read the ballot.

Subp. 13.

Two-sided ballots.

On two-sided ballots, the words "VOTE FRONT AND BACK OF BALLOT" must be printed in uppercase 10-point bold type at the bottom of both sides of the ballot.

Subp. 14.

Form of federal ballot.

The names of all candidates for the offices of president and vice-president of the United States and senator and representative in Congress shall be placed on a ballot printed on white paper which shall be known as the "federal ballot." This ballot must be prepared and furnished in accordance with the federal Uniformed and Overseas Citizens Absentee Voting Act, United States Code, title 42, section 1973ff. The federal ballot shall be the only ballot sent to citizens of the United States who are eligible to vote by absentee ballot only for federal candidates in Minnesota. The federal ballot shall conform in all other respects to the State Primary or State General election ballot.

Subp. 15.

Form of presidential ballot.

The names of all candidates for the offices of president and vice-president of the United States shall be placed on a ballot printed on white paper which shall be known as the "presidential ballot." This ballot must be prepared and furnished in accordance with the federal Uniformed and Overseas Citizens Absentee Voting Act, United States Code, title 42, section 1973ff. The presidential ballot shall be the only ballot provided to citizens of the United States who are eligible to vote by absentee ballot only for presidential candidates in Minnesota. The presidential ballot shall conform in all other respects to the State General election ballot.

Subp. 16.

Order and form of special election ballot.

The names of candidates to fill vacancies at a special election for county and municipal offices must be listed under the heading "Special election for (name of office)," followed by "To fill vacancy in term expiring (date)" with the name of the office, the date of expiration of the term, and any other information necessary to distinguish the office. For state offices, immediately following the title of the office shall be printed "To fill vacancy in term expiring (date)." Vacant offices being filled by special election must be listed with other offices of that type but after any offices for which a candidate will be elected for a full term, except as required by Minnesota Statutes, section 204D.25, subdivision 1.

Subp. 17.

Extraneous marks.

No election official may place marks on the ballot other than those provided in Minnesota Statutes, section 204C.09, subdivision 1, or 206.86, subdivision 5.

Subp. 18.

Example ballot.

The secretary of state shall supply each auditor with a copy of an example ballot by May 1 of each year. The example ballot must illustrate the format required for the ballots used in the primary and general elections that year. The county auditor shall distribute copies of the example ballot to municipal and school district clerks in municipalities and school districts holding elections that year. The official ballots must conform in all respects to the example ballot.

Statutory Authority:

MS s 206.84

History:

34 SR 1561; 38 SR 1368

Published Electronically:

May 1, 2014