Minnesota Administrative Rules

7049.0310 NATIONAL CATEGORICAL PRETREATMENT STANDARDS ADOPTED.

Subpart 1.

Adoption.

The pretreatment standards for existing sources, pretreatment standards for new sources, and all supporting provisions relevant to these standards contained in the following federal point source category regulations and all future amendments are adopted by reference and incorporated in this part:

	Point Source Category	CFR Cite
A.	Grain milling	40 CFR 406
B.	Concentrated animal feeding operations	40 CFR 412
C.	Electroplating	40 CFR 413
D.	Organic chemicals, plastics, and synthetic fibers	40 CFR 414
E.	Inorganic chemicals manufacturing	40 CFR 415
F.	Soap and detergent manufacturing	40 CFR 417
G.	Fertilizer manufacturing	40 CFR 418
H.	Petroleum refining	40 CFR 419
I.	Iron and steel manufacturing	40 CFR 420
J.	Nonferrous metal manufacturing	40 CFR 421
K.	Steam electric power generating	40 CFR 423
L.	Ferroalloy manufacturing	40 CFR 424
M.	Leather tanning and finishing	40 CFR 425
N.	Glass manufacturing	40 CFR 426
O.	Asbestos manufacturing	40 CFR 427
P.	Rubber manufacturing	40 CFR 428
Q.	Timber products processing	40 CFR 429
R.	Pulp, paper, and paperboard	40 CFR 430
S.	Builder's paper and board mills	40 CFR 431
T.	Metal finishing	40 CFR 433
U.	Centralized waste treatment	40 CFR 437
V.	Pharmaceutical manufacturing	40 CFR 439
W.	Transportation equipment cleaning	40 CFR 442
X.	Incinerators	40 CFR 444
Y.	Landfills	40 CFR 445
Z.	Paint formulating	40 CFR 446
AA.	Ink formulating	40 CFR 447
BB.	Pesticide chemicals	40 CFR 455
CC.	Battery manufacturing	40 CFR 461
DD.	Metal molding and casting	40 CFR 464
EE.	Coil coating	40 CFR 465
FF.	Porcelain enameling	40 CFR 466
GG.	Aluminum forming	40 CFR 467
HH.	Copper forming	40 CFR 468
II.	Electrical and electronic components	40 CFR 469
JJ.	Nonferrous metal forming and metal powders	40 CFR 471

Subp. 2.

Future pretreatment standards.

Future applicable pretreatment standards for existing sources, pretreatment standards for new sources, and all supporting provisions relevant to these standards in Code of Federal Regulations, title 40, chapter I, subchapter N, are adopted by reference.

Subp. 3.

Category determination.

The applicable category and subcategory for an industrial user may be determined by the control authority at any time. However, a formal category determination request, as provided by Code of Federal Regulations, title 40, part 403.6, which is incorporated by reference, must be submitted to the agency within the deadlines provided.

Statutory Authority:

MS s 115.03

History:

33 SR 696

Published Electronically:

November 6, 2008