language to be deleted (2) new language
relating to labor and industry; extending an independent contractor pilot program; making federal conformity changes to the apprenticeship program; modifying municipal building code enforcement; providing an exception to high pressure boiler requirements; requiring a workgroup to study plumbing at certain resorts; appropriating money for a high pressure boiler study;
amending Minnesota Statutes 2012, sections 178.02; 178.03; 178.041, subdivision 2; 178.07; 178.09; 178.10; 181.723, subdivisions 4, 4a, 5, 7, 8a; 326B.106, subdivision 2, by adding subdivisions; 326B.988; proposing coding for new law in Minnesota Statutes, chapters 178; 326B; repealing Minnesota Statutes 2012, sections 178.03, subdivision 2; 178.05; 178.06; 178.08; Minnesota Rules, parts 5200.0300; 5200.0310; 5200.0320, subparts 1, 2, 3, 4, 5, 7, 9, 10, 11, 12, 13, 14, 15; 5200.0340; 5200.0360; 5200.0390.
BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF MINNESOTA:
The commissioner of labor and industry, hereinafter called the commissioner, shall appoint an Apprenticeship Board, hereinafter referred to as the board, composed of three representatives each from employer and employee organizations, and two representatives of the general public. The director of education responsible for career and technical education or designee shall be an ex officio member of the board and shall serve in an advisory capacity only.
The board shall not expire. The terms, compensation, and removal of appointed members shall be as provided in section 15.059.
The board shall meet at the call of the commissioner. It shall propose occupational classifications for apprenticeship programs; propose minimum standards for apprenticeship programs and agreements; and advise on the establishment of such policies, procedures, and rules as the board deems necessary in implementing the intent of this chapter.
There is established a Division of Labor Standards and Apprenticeship in the Department of Labor and Industry. This division shall be administered by a director, and be under the supervision of the commissioner of labor and industry, hereinafter referred to as the commissioner.
The commissioner shall appoint a director of the Division of Labor Standards and Apprenticeship, hereinafter referred to as the director, and may appoint and employ such clerical, technical, and professional help as is necessary to accomplish the purposes of this chapter. The director and division staff shall be appointed and shall serve in the classified service pursuant to civil service law and rules.
The director, under the supervision of the commissioner, and with the advice and consultation of the Apprenticeship Board, is authorized: to administer the provisions of this chapter; to promote apprenticeship and other forms of on-the-job learning; to establish, in cooperation and consultation with the Apprenticeship Board and with the apprenticeship committees, conditions, training, and learning standards for the approval of apprenticeship programs and agreements, which conditions and standards shall in no case be lower than those (1) prescribed by this chapter, and (2) established under Code of Federal Regulations, title 29, part 29; to promote equal employment opportunity in apprenticeship and other on-the-job learning and to establish a Minnesota plan for equal employment opportunity in apprenticeship which shall be consistent with standards established under Code of Federal Regulations, title 29, part 30, as amended; to issue certificates of registration to sponsors of approved apprenticeship programs; to act as secretary of the Apprenticeship Board; to approve, if of the opinion that approval is for the best interest of the apprentice, any apprenticeship agreement which meets the standards established hereunder; to terminate any apprenticeship agreement in accordance with the provisions of such agreement; to keep a record of apprenticeship agreements and their disposition; to issue certificates of completion of apprenticeship; and to perform such other duties as the commissioner deems necessary to carry out the intent of this chapter; provided, that the administration and supervision of supplementary instruction in related subjects for apprentices; coordination of instruction on a concurrent basis with job experiences, and the selection and training of teachers and coordinators for such instruction shall be the function of state and local boards responsible for vocational education. The director shall have the authority to make wage determinations applicable to the graduated schedule of wages and journeyworker wage rate for apprenticeship agreements, giving consideration to the existing wage rates prevailing throughout the state, except that no wage determination by the director shall alter an existing wage provision for apprentices or journeyworkers that is contained in a bargaining agreement in effect between an employer and an organization of employees, nor shall the director make any determination for the beginning rate for an apprentice that is below the wage minimum established by federal or state law.
The director, if requested by a sponsoring entity, shall grant reciprocity approval to apprenticeship programs of employers and unions who jointly form a sponsoring entity on a multistate basis in other than the building construction industry if such programs are in conformity with this chapter and have been registered in compliance with Code of Federal Regulations, title 29, part 29, by a state apprenticeship council recognized by or registered with the United States Department of Labor, Office of Apprenticeship, when such approval is necessary for federal purposes under Code of Federal Regulations, title 29, section 29.13(a) or 29.13(b)(7).
Rules, modifications, amendments, and repeals thereof which may be issued by the commissioner under this section shall be adopted in accordance with chapter 14 and shall have the force and effect of law.
Every apprenticeship agreement entered into under this chapter shall contain:
(1) the names of the contracting parties;
(2) the date of birth, and information as to the race and sex of the apprentice;
(3) a statement of the trade, craft, occupation, or business which the apprentice is to be taught, and the time at which the apprenticeship will begin and end;
(4) a statement showing the number of hours to be spent by the apprentice in work and the number of hours to be spent in concurrent, supplementary instruction in related subjects, which instruction shall be not less than 144 hours during each year of the apprenticeship term. The maximum number of hours of work per week not including time spent in related and supplemental instruction for any apprentice shall not exceed either the number prescribed by law or the customary regular number of hours per week for the employees of the company by which the apprentice is employed. An apprentice may be allowed to work overtime provided that the overtime work does not conflict with supplementary instruction course attendance. All time in excess of the number of hours of work per week as specified in the apprenticeship agreement shall be considered overtime. For overtime, the apprentice's rate of pay shall be increased by the same percentage as the journeyworker's rate of pay for overtime is increased in the same industry or establishment;
(5) a statement setting forth a schedule of the processes in the trade, occupation, or industry divisions in which the apprentice is to be taught and the approximate time to be spent at each process;
(6) a statement of the graduated scale of wages to be paid the apprentice and whether the required school time shall be compensated;
(7) a statement providing for a period of probation of not more than 500 hours of employment and instruction extending over not more than four months, during which time the apprenticeship agreement shall be terminated by the director upon written request of either party, and providing that after such probationary period the apprenticeship agreement may be terminated by the director by mutual agreement of all parties thereto, or terminated by the director for good and sufficient reason;
(8) a provision that controversies or differences concerning the terms of the apprenticeship agreement which cannot be resolved by the parties thereto, or which are not covered by a collective bargaining agreement, may be submitted to the director for determination as provided for in section 178.09;
(9) a provision that an employer who is unable to fulfill an obligation under the apprenticeship agreement may, with the approval of the director, transfer such contract to any other employer, provided that the apprentice consents and that such other employer agrees to assume the obligations of the apprenticeship agreement; and
(10) such additional terms and conditions as may be prescribed or approved by the director not inconsistent with the provisions of this chapter.
Upon the complaint of any interested person or upon the director's own initiative the director may investigate to determine if there has been a violation of the terms of an apprenticeship agreement made under this chapter. The director may conduct such proceedings as are necessary for that investigation and determination. All such proceedings shall be on a fair and impartial basis and shall be conducted according to rules promulgated under section 178.041.
The determination of the director shall be filed with the commissioner and written notice shall be served on all parties affected by it. Any person aggrieved by any determination or action of the director may appeal to the commissioner. If no appeal is filed with the commissioner within ten days of the date of service, the director's determination shall become the order of the commissioner. If an appeal is filed, the commissioner shall appoint and convene a hearing board to be composed of three members of the Apprenticeship Board appointed under section 178.02, one member being a representative of an employer organization, one representative being a member of an employee organization, and one member representing the general public. The board shall hold a hearing on the appeal after due notice to the interested parties and shall submit to the commissioner findings of fact and a recommended decision accompanied by a memorandum of the reasons for it. Within 30 days after submission, the commissioner may adopt the recommended decision of the board, or disregard the recommended decision of the board and prepare a decision based on the findings of fact and accompanied by a memorandum of reasons for that decision. Written notice of the commissioner's determination and order shall be served on all parties affected by it. Any person aggrieved or affected by any determination or order of the commissioner may appeal from it to the district court having jurisdiction at any time within 30 days after the date of the order by service of a written notice of appeal on the commissioner. Upon service of the notice of appeal, the commissioner shall file with the court administrator of the district court to which the appeal is taken a certified copy of the order appealed from, together with findings of fact on which it is based. The person serving a notice of appeal shall, within five days after its service, file it, with proof of service, with the court administrator of the court to which the appeal is taken. The district court shall then have jurisdiction over the appeal and it shall be entered in the records of the district court and tried de novo according to the applicable rules. Any person aggrieved or affected by any determination, order, or decision of the district court may appeal as in other civil cases.
(a) An individual is an independent contractor and not an employee of the person for whom the individual is performing services in the course of the person's trade, business, profession, or occupation only if the individual is registered with the Department of Labor and Industry, if required under subdivision 4a, and the individual:
(1) maintains a separate business with the individual's own office, equipment, materials, and other facilities;
(2)(i) holds or has applied for a federal employer identification number or (ii) has filed business or self-employment income tax returns with the federal Internal Revenue Service if the individual has performed services in the previous year;
(3) is operating under contract to perform the specific services for the person for specific amounts of money and under which the individual controls the means of performing the services;
(4) is incurring the main expenses related to the services that the individual is performing for the person under the contract;
(5) is responsible for the satisfactory completion of the services that the individual has contracted to perform for the person and is liable for a failure to complete the services;
(6) receives compensation from the person for the services performed under the contract on a commission or per-job or competitive bid basis and not on any other basis;
(7) may realize a profit or suffer a loss under the contract to perform services for the person;
(8) has continuing or recurring business liabilities or obligations; and
(9) the success or failure of the individual's business depends on the relationship of business receipts to expenditures.
(b) If an individual is an owner or partial owner of a business entity, the individual is an employee of the person for whom the individual is performing services in the course of the person's trade, business, profession, or occupation, and is not an employee of the business entity in which the individual has an ownership interest, unless:
(1) the business entity meets the nine factors in paragraph (a);
(2) invoices are submitted in the name of the business entity;
(3) the business entity is registered with the secretary of state, if required; and
(4) the business entity is registered with the Department of Labor and Industry, if required under subdivision 4a.
(a) The commissioner shall implement a pilot project, effective July 1, 2012, for the registration of Persons who perform public or private sector commercial or residential building construction or improvement services as described in subdivision 2. The purpose of the pilot project is to evaluate whether the information obtained through registration assists the Department of Labor and Industry, the Department of Employment and Economic Development, and the Department of Revenue to enforce laws related to misclassification of employees. The commissioner shall issue a report to the legislature no later than January 1, 2014, on recommendations for amendments to the registration program, including reasonable registration fees to be used to aid in enforcing misclassification laws. The commissioner must not charge a fee for registration under the pilot project, but may take the enforcement action specified in subdivision 8a. The pilot project shall expire on June 30, 2014, unless extended by the legislature.
(b) Except as provided in paragraph (c), any person who performs construction services in the state on or after September 15, 2012, must register with the commissioner as provided in subdivision 5 before performing construction services for another person. The requirements for registration under this subdivision are not a substitute for, and do not relieve a person from complying with, any other law requiring that the person be licensed, registered, or certified.
(c) The registration requirements in this subdivision do not apply to:
(1) a person who, at the time the person is performing the construction services, holds a current license, certificate, or registration under chapter 299M or 326B;
(2) a person who holds a current independent contractor exemption certificate issued under this section that is in effect on September 15, 2012, except that the person must register under this section no later than the date the exemption certificate expires, is revoked, or is canceled;
(4) an employee of the person performing the construction services, if the person was in compliance with laws related to employment of the individual at the time the construction services were performed;
(5) an architect or professional engineer engaging in professional practice as defined in section 326.02, subdivisions 2 and 3;
(6) a school district or technical college governed under chapter 136F;
(7) a person providing construction services on a volunteer basis, including but not limited to Habitat for Humanity and Builders Outreach Foundation, and their individual volunteers when engaged in activities on their behalf; or
(8) a person exempt from licensing under section 326B.805, subdivision 6, clause (5).
(a) Persons required to register under subdivision 4a must submit electronically, in the manner prescribed by the commissioner, a complete application according to paragraphs (b) to (d).
(b) A complete application must include all of the following information about any individual who is registering as an individual or a sole proprietor, or who owns 25 percent or more of a business entity being registered:
(1) the individual's full legal name and title at the applicant's business;
(2) the individual's business address and telephone number;
(3) the percentage of the applicant's business owned by the individual; and
(4) the individual's Social Security number.
(c) A complete application must also include the following information:
(1) the applicant's legal name; assumed name filed with the secretary of state, if any; designated business address; physical address; telephone number; and e-mail address;
(2) the applicant's Minnesota tax identification number, if one is required or has been issued;
(3) the applicant's federal employer identification number, if one is required or has been issued;
(4) evidence of the active status of the applicant's business filings with the secretary of state, if one is required or has been issued;
(5) whether the applicant has any employees at the time the application is filed;
(6) the names of all other persons with an ownership interest in the business entity who are not identified in paragraph (b), and the percentage of the interest owned by each person, except that the names of shareholders with less than ten percent ownership in a publicly traded corporation need not be provided;
(7) information documenting compliance with workers' compensation and unemployment insurance laws;
(8) a certification that the person signing the application has: reviewed it; determined that the information provided is true and accurate; and determined that the person signing is authorized to sign and file the application as an agent of the applicant. The name of the person signing, entered on an electronic application, shall constitute a valid signature of the agent on behalf of the applicant; and
(9) a signed authorization for the Department of Labor and Industry to verify the information provided on or with the application.
(d) A registered person must notify the commissioner within 15 days after there is a change in any of the information on the application as approved. This notification must be provided electronically in the manner prescribed by the commissioner. However, if the business entity structure, legal form of the business entity, or business ownership has changed, the person must submit a new registration application and registration fee, if any, for the new business entity.
(b) An individual shall not hold himself or herself out as an independent contractor unless the individual meets the requirements of subdivision 4.
(c) A person who provides construction services in the course of the person's trade, business, occupation, or profession shall not:
(1) require an individual through coercion, misrepresentation, or fraudulent means to adopt independent contractor status or form a business entity;
(2) knowingly misrepresent or misclassify an individual as an independent contractor;
(3) contract with or perform construction services for another person without first being registered if required by subdivision 4a;
(4) contract with or pay another person to perform construction services if the other person is not registered if required by subdivision 4a. All payments to an unregistered person for construction services on a single project site shall be considered a single violation. It is not a violation of this clause:
(i) for a person to contract with or pay an unregistered person if the unregistered person was registered at the time the contract for construction services was entered into; or
(ii) for a homeowner or business to contract with or pay an unregistered person if the homeowner or business is not in the trade, business, profession, or occupation of performing building construction or improvement services; or
(5) be penalized for violations of this subdivision that are committed by another person. This clause applies only to violations of this paragraph.
Notwithstanding the maximum penalty amount in section 326B.082, subdivisions 7 and 12, the maximum penalty for failure to register is $2,000, but the commissioner shall forgive the penalty if the person registers within 30 days of the date of the penalty order.
the commissioner shall administer and enforce the State Building Code as a municipality with respect to public buildings and statelicensed facilities in the state. The commissioner shall establish appropriate permit, plan review, inspection fees, and surcharges for public buildings and statelicensed facilities.
Municipalities other than the state having an agreement with the commissioner for code administration and enforcement service for public buildings and state licensed facilities shall charge their customary fees, including surcharge, to be paid directly to the jurisdiction by the applicant seeking authorization to construct a public building or a state licensed facility. The commissioner shall sign an agreement with a municipality other than the state for plan review, code administration, and code enforcement service for public buildings and state licensed facilities in the jurisdiction if the building officials of the municipality meet the requirements of section 326B.133 and wish to provide those services and if the commissioner determines that the municipality has enough adequately trained and qualified building inspectors to provide those services for the construction project.
The commissioner may direct the state building official to assist a community that has been affected by a natural disaster with building evaluation and other activities related to building codes.
Administration and enforcement in a municipality under this section must apply any optional provisions of the State Building Code adopted by the municipality. A municipality adopting any optional code provision shall notify the state building official within 30 days of its adoption.
The commissioner shall administer and enforce the provisions of the code relating to elevators statewide, except as provided for under section 326B.184, subdivision 4.
(1) boilers and pressure vessels in buildings occupied solely for residence purposes with accommodations for not more than five families;
(2) railroad locomotives operated by railroad companies for transportation purposes;
(3) air tanks installed on the right-of-way of railroads and used directly in the operation of trains;
(4) boilers and pressure vessels under the direct jurisdiction of the United States;
(5) unfired pressure vessels having an internal or external working pressure not exceeding 15 psig with no limit on size;
(6) pressure vessels used for storage of compressed air not exceeding five cubic feet in volume and equipped with an ASME code stamped safety valve set at a maximum of 100 psig;
(7) pressure vessels having an inside diameter not exceeding six inches;
(8) every vessel that contains water under pressure, including those containing air that serves only as a cushion, whose design pressure does not exceed 300 psig and whose design temperature does not exceed 210 degrees Fahrenheit;
(9) boiler or pressure vessels located on farms used solely for agricultural or horticultural purposes; for purposes of this section, boilers used for mint oil extraction are considered used for agricultural or horticultural purposes, provided that the owner or lessee complies with the inspection requirements contained in section 326B.958;
(10) tanks or cylinders used for storage or transfer of liquefied petroleum gases;
(11) unfired pressure vessels in petroleum refineries;
(12) an air tank or pressure vessel which is an integral part of a passenger motor bus, truck, or trailer;
(13) hot water heating and other hot liquid boilers not exceeding a heat input of 750,000 BTU per hour;
(14) hot water supply boilers (water heaters) not exceeding a heat input of 500,000 BTU per hour, a water temperature of 210 degrees Fahrenheit, a nominal water capacity of 120 gallons, or a pressure of 160 psig;
(15) a laundry and dry cleaning press not exceeding five cubic feet of steam volume;
(16) pressure vessels operated full of water or other liquid not materially more hazardous than water, if the vessel's contents' temperature does not exceed 210 degrees Fahrenheit or a pressure of 200 psig;
(17) steam-powered turbines at papermaking facilities which are powered by steam generated by steam facilities at a remote location;
(18) manually fired boilers for model locomotive, boat, tractor, stationary engine, or antique motor vehicles constructed or maintained only as a hobby for exhibition, educational or historical purposes and not for commercial use, if the boilers have an inside diameter of 12 inches or less, or a grate area of two square feet or less, and are equipped with an ASME stamped safety valve of adequate size, a water level indicator, and a pressure gauge;
(19) any pressure vessel used as an integral part of an electrical circuit breaker;
(20) pressure vessels used for the storage of refrigerant if they are built to ASME code specifications, registered with the national board, and equipped with an ASME code-stamped pressure-relieving device set no higher than the maximum allowable working pressure of the vessel. This does not include pressure vessels used in ammonia refrigeration systems;
(21) pressure vessels used for the storage of oxygen, nitrogen, helium, carbon dioxide, argon, nitrous oxide, or other medical gas, provided the vessel is constructed to ASME or Minnesota Department of Transportation specifications and equipped with an ASME code-stamped pressure-relieving device. The owner of the vessels shall perform annual visual inspections and planned maintenance on these vessels to ensure vessel integrity;
(22) pressure vessels used for the storage of compressed air for self-contained breathing apparatuses;
(23) hot water heating or other hot liquid boilers vented directly to the atmosphere; and
(24) pressure vessels used for the storage of compressed air not exceeding 1.5 cubic feet (11.22 gallons) in volume with a maximum allowable working pressure of 600 psi or less.
(b) An engineer's license is not required for hot water supply boilers.
(c) An engineer's license and annual inspection by the department is not required for boilers, steam cookers, steam kettles, steam sterilizers or other steam generators not exceeding 100,000 BTU per hour input, 25 kilowatt, and a pressure of 15 psig.
(d) Electric boilers not exceeding a maximum working pressure of 50 psig, maximum of 30 kilowatt input or three horsepower rating shall be inspected as pressure vessels and shall not require an engineer license to operate.
Presented to the governor May 17, 2014
Signed by the governor May 21, 2014, 10:28 a.m.
Official Publication of the State of Minnesota
Revisor of Statutes