Minnesota Office of the Revisor of Statutes


Revisor of Statutes Menu


2006 Minnesota Statutes

This is a historical version of this statute chapter. Also view the most recent published version.

    Subdivision 1. Measurement of tank capacity. (a) By September 1, 1996, all aboveground
tanks of 2,000 gallons or more used for storage and subsequent resale of petroleum products
must be equipped with:
(1) a gauge in working order that shows the current level of product in the tank; or
(2) an audible or visual alarm which alerts the person delivering fuel into the tank that the
tank is within 100 gallons of capacity.
(b) In lieu of the equipment specified in paragraph (a), the owner or operator of a tank
may use a manual method of measurement which accurately determines the amount of product
in the tank and the amount of capacity available to be used. This information must be readily
available to anyone delivering fuel into the tank prior to delivery. Documentation that a tank
has the available capacity for the amount of product to be delivered must be transmitted to the
person making the delivery.
    Subd. 2. Contents labeled. (a) By December 1, 1995, all aboveground tanks governed by
this section must be numbered and labeled as to the tank contents, total capacity, and capacity
in volume increments of 500 gallons or less.
(b) Piping connected to the tank must be labeled with the product carried at the point of
delivery and at the tank inlet. Manifolded delivery points must have all valves labeled as to
product distribution.
    Subd. 3. Site diagram. (a) All tanks at a facility shall be shown on a site diagram which is
permanently mounted in an area accessible to delivery personnel. The diagram shall show the
number, capacity, and contents of tanks and the location of piping, valves, storm sewers, and
other information necessary for emergency response, including the facility owner's or operator's
telephone number.
(b) Prior to delivering product into an underground or aboveground tank, delivery personnel
(1) consult the site diagram, where applicable, for proper delivery points, tank and piping
locations, and valve settings;
(2) visually inspect the tank, piping, and valve settings to determine that the product being
delivered will flow only into the appropriate tank; and
(3) determine, using equipment and information available at the site, that the available
capacity of the tank is sufficient to hold the amount being delivered.
Delivery personnel must remain in attendance during delivery.
    Subd. 4. Capacity of tank. A tank may not be filled from a transport vehicle compartment
containing more than the available capacity of the tank, unless the hose of the transport vehicle is
equipped with a manually operated shut-off nozzle.
    Subd. 5. Exemption. Aboveground and underground tanks located at refineries, pipeline
terminals, and river terminals are exempt from this section.
History: 1995 c 240 art 1 s 13

700 State Office Building, 100 Rev. Dr. Martin Luther King Jr. Blvd., St. Paul, MN 55155 ♦ Phone: (651) 296-2868 ♦ TTY: 1-800-627-3529 ♦ Fax: (651) 296-0569