SF 901

1st Engrossment - 88th Legislature (2013 - 2014) Posted on 05/07/2013 04:11pm

A bill for an act
relating to energy; promoting renewable energy; regulating the distributed
generation of electric energy; establishing a requirement for utilities to generate
solar energy; providing various incentives for the production of solar energy;
requiring several studies related to electric energy; regulating utility cost recovery
for certain transmission, emission reduction, and gas infrastructure investments;
providing state energy policies; regulating various energy conservation
investment programs; amending Minnesota Statutes 2012, sections 16C.144,
subdivision 2; 216B.02, subdivision 4; 216B.16, subdivision 7b; 216B.1635;
216B.164, subdivisions 3, 4, 6, by adding subdivisions; 216B.1692, subdivisions
1, 8, by adding a subdivision; 216B.1695, subdivision 5, by adding a subdivision;
216B.2401; 216B.241, subdivisions 1, 1e, by adding a subdivision; 216B.2422,
subdivision 4; 216C.05; 216C.435, subdivision 8, by adding a subdivision;
216C.436, subdivisions 2, 7, 8; 429.101, subdivision 2; Laws 2005, chapter
97, article 10, section 3; proposing coding for new law in Minnesota Statutes,
chapters 3; 216B; 216C; repealing Minnesota Statutes 2012, section 216B.1637.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF MINNESOTA:

ARTICLE 1

STATE ENERGY POLICY

Section 1.

new text begin [3.8852] PLANNING STRATEGY FOR SUSTAINABLE ENERGY
FUTURE.
new text end

new text begin (a) The Legislative Energy Commission, in consultation with the Division of Energy
Resources and the Environmental Quality Board shall develop a framework for the state of
Minnesota to transition to a renewable energy economy that ends Minnesota's contribution
to greenhouse gases from burning fossil fuels over the next few decades. The energy
commission framework and strategy must aim to make Minnesota the first state in the
nation to use only renewable energy. The framework must be consistent with the goal of
reducing carbon dioxide emissions by 80 percent by the year 2050 in section 216H.02.
new text end

new text begin (b) In developing a framework for this transition, the Legislative Energy
Commission shall consult with stakeholders, including but not limited to cooperative,
municipal, and investor-owned utilities, stakeholders in transportation, agriculture,
forestry, waste management, renewable energy and renewable fuels, energy efficiency
and conservation, natural resources and environmental advocates, labor, and industry;
technical and scientific experts, and other Minnesotans to examine the challenges and
opportunities involved, and develop a strategy and timeline to protect the environment
and create jobs. The timeline shall establish goals and strategies that prepare for the steps
beyond the renewable energy standards already established. The Environmental Quality
Board shall provide guidance to economic sectors including transportation, agriculture,
forestry, water and waste management, and the overall economy. The Division of Energy
Resources shall provide technical support.
new text end

new text begin (c) The Legislative Energy Commission and its stakeholders must consider the
following in creating the framework:
new text end

new text begin (1) the early impacts of climate change that are beginning to illustrate the significant
impacts that the growing concentration of greenhouse gases will have on Minnesotans'
lives, economy, and the environment. The almost three-fold increase in homeowner
insurance premiums in a decade due to more severe weather events, along with record
flooding in northeastern and southeastern Minnesota, severe drought, extreme heat events,
and descriptions of Hurricane Sandy as "the new norm" provide hints of the trends that
will affect future generations. The commission and stakeholders must consider the
economic and environmental costs of continued global reliance on fossil fuels;
new text end

new text begin (2) while all states and countries will need to move to a sustainable energy system
to prevent a climate catastrophe, by planning and developing a thoughtful cost-effective
strategy to make this transition efficiently, Minnesota can provide leadership. By leading
the way, Minnesota will create jobs and industry in the state while states that follow will
be turning to Minnesota industries for the products and services to help them make a
similar transition;
new text end

new text begin (3) the Minnesota economy currently loses about $13 billion per year to other states
and nations to import fossil fuels. Energy efficiency and renewable energy expenditures
reduce that huge drain on the economy and recycle those dollars in Minnesota jobs and
businesses; and
new text end

new text begin (4) the challenge of moving to a completely sustainable energy economy will be
great and will take many years. To fully integrate solar, wind, and other renewable energy
sources, Minnesota will need to develop new technologies, whether hydrogen, battery, or
other means of energy storage in order to ensure our renewable energy sources reliably
meet electricity demand. The Division of Energy Resources, the Environmental Quality
Board, and other stakeholders shall monitor new storage and renewable generation
technologies, as well as energy efficiency and conservation options. The state strategy
and timeline shall be modified as needed to take advantage of each new development to
move the state forward in ending fossil fuel use in power generation, heating and cooling,
industry, and transportation.
new text end

new text begin (d) The Legislative Energy Commission shall report to relevant legislative
committees by January 15, 2014 and annually thereafter, on progress towards these goals.
new text end

ARTICLE 2

DISTRIBUTED GENERATION; SOLAR STANDARD

Section 1.

Minnesota Statutes 2012, section 216B.02, subdivision 4, is amended to read:

Subd. 4.

Public utility.

"Public utility" means persons, corporations, or other legal
entities, their lessees, trustees, and receivers, now or hereafter operating, maintaining,
or controlling in this state equipment or facilities for furnishing at retail natural,
manufactured, or mixed gas or electric service to or for the public or engaged in the
production and retail sale thereof but does not include (1) a municipality or a cooperative
electric association, organized under the provisions of chapter 308A, producing or
furnishing natural, manufactured, or mixed gas or electric service; (2) a retail seller of
compressed natural gas used as a vehicular fuel which purchases the gas from a public
utility; or (3) a retail seller of electricity used to recharge a battery that powers an electric
vehicle, as defined in section 169.011, subdivision 26a, and that is not otherwise a public
utility under this chapter. Except as otherwise provided, the provisions of this chapter
shall not be applicable to any sale of natural, manufactured, or mixed gas or electricity
by a public utility to another public utility for resale. In addition, the provisions of this
chapter shall not apply to a public utility whose total natural gas business consists of
supplying natural, manufactured, or mixed gas to not more than 650 customers within a
city pursuant to a franchise granted by the city, provided a resolution of the city council
requesting exemption from regulation is filed with the commission. The city council
may rescind the resolution requesting exemption at any time, and, upon the filing of the
rescinding resolution with the commission, the provisions of this chapter shall apply to the
public utility. No person shall be deemed to be a public utility if it furnishes its services
only to tenants or cooperative or condominium owners in buildings owned, leased, or
operated by such person. No person shall be deemed to be a public utility if it furnishes
service to occupants of a manufactured home or trailer park owned, leased, or operated by
such person. No person shall be deemed to be a public utility if it produces or furnishes
service to less than 25 persons. new text begin No person shall be deemed to be a public utility solely as a
result of the person furnishing consumers with electricity or heat generated from solar
generating equipment located on the consumer's property, provided the equipment is
owned or operated by an entity other than the consumer.
new text end

Sec. 2.

Minnesota Statutes 2012, section 216B.164, is amended by adding a
subdivision to read:

new text begin Subd. 2a. new text end

new text begin Definitions. new text end

new text begin (a) For the purposes of this section, the following terms
have the meanings given them:
new text end

new text begin (b) "Aggregated meter" means a meter located on the premises of a customer's
owned or leased property that is contiguous with property containing the customer's
designated meter.
new text end

new text begin (c) "Capacity" means the number of megawatts AC (alternative current) at the point
of interconnection between a distributed generation facility and a utility's electric system.
new text end

new text begin (d) "Cogeneration" means a combined process whereby electrical and useful thermal
energy are produced simultaneously.
new text end

new text begin (e) "Contiguous property" means property owned or leased by the customer sharing
a common border, without regard to interruptions in contiguity caused by easements,
public thoroughfares, transportation rights-of-way, or utility rights-of-way.
new text end

new text begin (f) "Customer" means the person who is named on the utility electric bill for the
premises.
new text end

new text begin (g) "Designated meter" means a meter that is physically attached to the customer's
facility that the customer-generator designates as the first meter to which net metered
credits are to be applied as the primary meter for billing purposes when the customer is
serviced by more than one meter.
new text end

new text begin (h) "Distributed generation" means a facility that:
new text end

new text begin (1) has a capacity of ten megawatts or less;
new text end

new text begin (2) is interconnected with a utility's distribution system, over which the commission
has jurisdiction; and
new text end

new text begin (3) generates electricity from natural gas, renewable fuel, or a similarly clean fuel,
and may include waste heat, cogeneration, or fuel cell technology.
new text end

new text begin (i) "High-efficiency, distributed generation" means a distributed energy facility that
has a minimum efficiency of 40 percent, as calculated under section 272.0211.
new text end

new text begin (j) "Net metered facility" means an electric generation facility with the purpose of
offsetting energy use through the use of renewable energy or high-efficiency distributed
generation sources.
new text end

new text begin (k) "Renewable energy" has the meaning given in section 216B.2411, subdivision 2.
new text end

Sec. 3.

Minnesota Statutes 2012, section 216B.164, subdivision 3, is amended to read:

Subd. 3.

Purchases; small facilities.

(a) For a qualifying facility having less
than deleted text begin 40-kilowatt deleted text end new text begin 1,000-kilowatt new text end capacity, the customer shall be billed for the net energy
supplied by the utility according to the applicable rate schedule for sales to that class of
customer. In the case of net input into the utility system by a qualifying facility having new text begin : (i)
more than 40-kilowatt but new text end less than deleted text begin 40-kilowatt deleted text end new text begin 1,000-kilowatt new text end capacity, compensation to
the customer shall be at a per kilowatt-hour rate determined under paragraph (b) deleted text begin or (c) deleted text end new text begin ; or
(ii) less than 40-kilowatt capacity, compensation to the customer shall be at a per-kilowatt
rate determined under paragraph (c) new text end . new text begin Compensation for net input into the utility system
shall be applied as a credit to the customer's energy bill, carried forward and applied to
subsequent energy bills for a period of up to 12 months. If any credit remains after the
12-month period, the value of the remaining credit must be paid to the customer within 15
days of the next billing date. The customer may choose the month in which the 12-month
billing and credit period begins.
new text end

(b) In setting rates, the commission shall consider the fixed distribution costs to the
utility not otherwise accounted for in the basic monthly charge and shall ensure that the
costs charged to the qualifying facility are not discriminatory in relation to the costs
charged to other customers of the utility. The commission shall set the rates for net
input into the utility system based on avoided costs as defined in the Code of Federal
Regulations, title 18, section 292.101, paragraph (b)(6), the factors listed in Code of
Federal Regulations, title 18, section 292.304, and all other relevant factors.

(c) Notwithstanding any provision in this chapter to the contrary, a qualifying facility
new text begin that began generating electricity before January 1, 2015, new text end having less than 40-kilowatt
capacity may elect that the compensation for net input by the qualifying facility into the
utility system shall be at the average retail utility energy rate. "Average retail utility energy
rate" is defined as the average of the retail energy rates, exclusive of special rates based
on income, age, or energy conservation, according to the applicable rate schedule of the
utility for sales to that class of customer.

(d) If the qualifying facility new text begin or net metered facility new text end is interconnected with a
nongenerating utility which has a sole source contract with a municipal power agency
or a generation and transmission utility, the nongenerating utility may elect to treat its
purchase of any net input under this subdivision as being made on behalf of its supplier
and shall be reimbursed by its supplier for any additional costs incurred in making the
purchase. Qualifying facilities new text begin or net metered facilities new text end having less than deleted text begin 40-kilowatt
deleted text end new text begin 1,000-kilowatt new text end capacity may, at the customer's option, elect to be governed by the
provisions of subdivision 4.

Sec. 4.

Minnesota Statutes 2012, section 216B.164, subdivision 4, is amended to read:

Subd. 4.

Purchases; wheeling; costs.

(a) Except as otherwise provided in
paragraph (c), this subdivision shall apply to all qualifying facilities having deleted text begin 40-kilowatt
deleted text end new text begin 1,000-kilowatt new text end capacity or more as well as qualifying facilities as defined in subdivision 3
new text begin and net metered systems under subdivision 4a new text end which elect to be governed by its provisions.

(b) The utility to which the qualifying facility is interconnected shall purchase all
energy and capacity made available by the qualifying facility. The qualifying facility shall
be paid the utility's full avoided capacity and energy costs as negotiated by the parties, as
set by the commission, or as determined through competitive bidding approved by the
commission. The full avoided capacity and energy costs to be paid a qualifying facility
that generates electric power by means of a renewable energy source are the utility's least
cost renewable energy facility or the bid of a competing supplier of a least cost renewable
energy facility, whichever is lower, unless the commission's resource plan order, under
section 216B.2422, subdivision 2, provides that the use of a renewable resource to meet
the identified capacity need is not in the public interest.

(c) For all qualifying facilities having 30-kilowatt capacity or more, the utility
shall, at the qualifying facility's or the utility's request, provide wheeling or exchange
agreements wherever practicable to sell the qualifying facility's output to any other
Minnesota utility having generation expansion anticipated or planned for the ensuing ten
years. The commission shall establish the methods and procedures to insure that except
for reasonable wheeling charges and line losses, the qualifying facility receives the full
avoided energy and capacity costs of the utility ultimately receiving the output.

(d) The commission shall set rates for electricity generated by renewable energy.

Sec. 5.

Minnesota Statutes 2012, section 216B.164, is amended by adding a
subdivision to read:

new text begin Subd. 4a. new text end

new text begin Net metered facility. new text end

new text begin Notwithstanding any provision of this chapter to the
contrary, a customer with a net metered facility having less than 1,000-kilowatt capacity
may elect to be compensated for the customer's net input into the utility system in the form
of a kilowatt-hour credit on the customer's energy bill carried forward and applied to
subsequent energy bills. Any net input supplied by the customer into the utility system
that exceeds energy supplied to the customer by the utility during a 12-month period must
be compensated at the utility's avoided cost rate under subdivision 3, paragraph (b), or
subdivision 4, paragraph (b), as applicable. The customer may choose the month in which
the annual billing period begins.
new text end

Sec. 6.

Minnesota Statutes 2012, section 216B.164, is amended by adding a
subdivision to read:

new text begin Subd. 4b. new text end

new text begin Aggregation of meters. new text end

new text begin (a) For the purpose of measuring electricity
under subdivisions 3 and 4a, a utility must aggregate for billing purposes a customer's
designated meter with one or more aggregated meters if a customer requests that it do so.
new text end

new text begin (b) A utility must comply with a request by a customer-generator to aggregate
additional meters within 60 days. The specific meters must be identified at the time of the
request. In the event that more than one meter is identified, the customer must designate
the rank order for the aggregated meters to which the net metered credits are to be applied new text end new text begin .
At least 60 days prior to the beginning of the next annual billing period, a customer may
amend the rank order of the aggregated meters, subject to this subdivision.
new text end

new text begin (c) The aggregation of meters applies only to charges that use kilowatt-hours as the
billing determinant. All other charges applicable to each meter account shall be billed to
the customer.
new text end

new text begin (d) The utility will first apply the kilowatt-hour credit to the charges for the
designated meter and then to the charges for the aggregated meters in the rank order
specified by the customer. If the net metered facility supplies more electricity to the utility
than the energy usage recorded by the customer-generator's designated and aggregated
meters during a monthly billing period, the utility shall apply credits to the customer's next
monthly bill for the excess kilowatt-hours.
new text end

new text begin (e) With the commission's prior approval, a utility may charge the customer-generator
requesting to aggregate meters a reasonable fee to cover the administrative costs incurred in
implementing the costs of this subdivision, pursuant to a tariff approved by the commission
for a public utility or governing body for a municipal electric utility or electric cooperative.
new text end

Sec. 7.

Minnesota Statutes 2012, section 216B.164, is amended by adding a
subdivision to read:

new text begin Subd. 4c. new text end

new text begin Limiting cumulative generation prohibited. new text end

new text begin The commission and any
other governing body regulating public utilities, municipal electric utilities, or electric
cooperatives are prohibited from limiting the cumulative generation of net metered
facilities under subdivision 4a and qualifying facilities under subdivision 3 to less than five
percent of a utility or cooperative's average annual retail electricity sales over the previous
three calendar years. Prior to interconnecting a net metered facility that would result
in cumulative net metered facility generation in excess of five percent, a public utility,
municipal electric utility, or electric cooperative's obligation to offer net metering to a new
customer-generator may be limited by the commission or governing body if it determines
doing so is in the public interest. The commission may limit net metering obligations
under this subdivision only after providing notice and opportunity for public comment.
The governing body of a municipal electric utility or electric cooperative may limit net
metering obligations under this subdivision only after providing the affected municipal
electric utility or electric cooperative's customers with notice and opportunity to comment.
When determining whether limiting net metering obligations under this subdivision is in
the public interest, the commission or governing body shall consider:
new text end

new text begin (1) the environmental and other public policy benefits of net metered systems;
new text end

new text begin (2) the impact of net metered systems on the electricity costs for customers without
net metered systems;
new text end

new text begin (3) the effects of net metering on the reliability of the electric system;
new text end

new text begin (4) technical advances or technical concerns; and
new text end

new text begin (5) other statutory obligations imposed on the commission or a utility.
new text end

new text begin The commission or governing body may limit net metering obligations under clauses
(2) to (4) only if it finds implementation would cause significant rate impact, require
significant measures to address reliability, or raise significant technical issues.
new text end

Sec. 8.

Minnesota Statutes 2012, section 216B.164, subdivision 6, is amended to read:

Subd. 6.

Rules and uniform contract.

(a) The commission shall promulgate rules
to implement the provisions of this section. The commission shall also establish a uniform
statewide form of contract for use between utilities and a new text begin net metered or new text end qualifying facility
having less than deleted text begin 40-kilowatt deleted text end new text begin 1,000-kilowatt new text end capacity.

(b) The commission shall require the qualifying facility to provide the utility with
reasonable access to the premises and equipment of the qualifying facility if the particular
configuration of the qualifying facility precludes disconnection or testing of the qualifying
facility from the utility side of the interconnection with the utility remaining responsible
for its personnel.

(c) The uniform statewide form of contract shall be applied to all new and existing
interconnections established between a utility and a new text begin net metered or new text end qualifying facility
having less than 40-kilowatt capacity, except that existing contracts may remain in force
until deleted text begin written notice of election that the uniform statewide contract form applies is given by
either party to the other, with the notice being of the shortest time period permitted under
the existing contract for termination of the existing contract by either party, but not less
than ten nor longer than 30 days deleted text end new text begin terminated by mutual agreement between both parties new text end .

new text begin (d) An electric utility may not apply a standby charge to a net metered facility.
new text end

Sec. 9.

Minnesota Statutes 2012, section 216B.164, is amended by adding a
subdivision to read:

new text begin Subd. 10. new text end

new text begin Alternative tariff; compensation for resource value. new text end

new text begin (a) An electric
utility may apply for commission approval, or a cooperative electric association or
municipal electric utility may apply for approval from its governing body, for an
alternative tariff that compensates customers through a bill credit mechanism for the
value to the utility, its customers, and society for operating distributed solar photovoltaic
resources interconnected to the utility system and operated by customers primarily for
meeting their own energy needs.
new text end

new text begin (b) If approved, the alternative tariff shall apply to customers' interconnections
occurring after the date of approval. The alternative tariff is in lieu of the small facility
rate or net metering for distributed solar resources under subdivisions 3 and 4a.
new text end

new text begin (c) new text end new text begin The commission or governing body may after notice and opportunity for
public comment approve the alternative tariff provided the utility has demonstrated the
alternative tariff:
new text end

new text begin (1) appropriately applies a methodology established by the department under this
subdivision;
new text end

new text begin (2) includes a mechanism to allow recovery of the cost to serve customers operating
distributed solar systems;
new text end

new text begin (3) charges the customer for all electricity consumed by the customer at the
applicable rate schedule for sales to that class of customer;
new text end

new text begin (4) credits the customer for all electricity generated by the solar photovoltaic device
at the value-based credit rate established under this subdivision;
new text end

new text begin (5) applies the charges and credits in clauses (3) and (4) to a monthly bill that
includes a provision so that the unused portion of the credit in any month or billing period
shall be carried forward and credited against all charges. In the event that the customer
has a positive balance after the 12-month cycle ending on the last day in February, that
balance will be eliminated and the credit cycle will restart the following billing period
beginning on March 1;
new text end

new text begin (6) complies with the size limits specified in subdivision 4a;
new text end

new text begin (7) complies with the interconnection requirements under section 216B.1611; and
new text end

new text begin (8) is not subject to standby or network charges.
new text end

new text begin (d) A utility must provide to the customer the meter and any other equipment needed
to provide service under the alternative tariff.
new text end

new text begin (e) In no case shall the commission or governing body approve an alternative tariff
rate where the value-based credit rate under paragraph (c), clause (4), is lower than the
applicable retail rate schedule of the subject utility.
new text end

new text begin (f) The department must establish the distributed solar value methodology in
paragraph (c), clause (1), no later than January 31, 2014. When developing the distributed
solar value methodology, the department shall consult stakeholders with experience and
expertise in power systems, solar energy, and electric utility ratemaking regarding the
proposed methodology, underlying assumptions, and preliminary data.
new text end

new text begin (g) The distributed solar value methodology established by the department must,
at a minimum, account for the value of energy and its delivery, generation capacity,
transmission capacity, transmission and distribution line losses, and environmental value.
The department may, based on known and measurable evidence of the cost or benefit of
solar operation, incorporate other values into the methodology, including credit for locally
manufactured or assembled energy systems, systems installed at high-value locations
on the distribution grid, or other factors.
new text end

new text begin (h) The credit for distributed solar value applied to alternative tariffs approved under
this section shall represent the present value of the future revenue streams of the value
components identified in paragraph (g).
new text end

new text begin (i) The utility shall recalculate the alternative tariff on an annual cycle, and shall file
the recalculated alternative tariff with the commission or governing body for approval.
new text end

new text begin (j) Renewable energy credits for solar energy credited under this subdivision belong
to the electric utility providing the credit.
new text end

Sec. 10.

new text begin [216B.2427] SOLAR ELECTRICITY STANDARD.
new text end

new text begin Subdivision 1. new text end

new text begin Definitions. new text end

new text begin (a) For the purposes of this section, the terms defined in
this subdivision have the meanings given them.
new text end

new text begin (b) "Electric utility" has the meaning given in section 216B.1691, subdivision 1,
paragraph (b).
new text end

new text begin (c) "Total retail electric sales" has the meaning given in section 216B.1691,
subdivision 1, paragraph (c).
new text end

new text begin Subd. 2. new text end

new text begin Solar electricity standard. new text end

new text begin (a) Except as otherwise provided in paragraph
(b), each electric utility shall generate or procure solar electric generation capacity for
its retail customers in Minnesota or the retail customers of a distribution utility to which
the electric utility provides wholesale electric services. At a minimum, the following
percentages of the electric utility's total retail sales to retail customers in Minnesota must
be generated by solar energy new text end new text begin by the end of the year indicated:
new text end

new text begin (1) 2016: 0.25 percent;
new text end

new text begin (2) 2020: 1.0 percent; and
new text end

new text begin (3) 2025: 2.0 percent.
new text end

new text begin (b) A public utility must meet the requirements of this paragraph. An electric utility
subject to this paragraph must generate or procure solar electric generation capacity for
its retail customers in Minnesota or the retail customers of a distribution utility to which
the electric utility provides wholesale electric service. At a minimum, the following
percentages of the electric utility's total retail electric sales to retail customers in Minnesota
must be generated by solar energy by the end of the year indicated:
new text end

new text begin (1) 2016: 0.5 percent;
new text end

new text begin (2) 2020: 2.0 percent; and
new text end

new text begin (3) 2025: 4.0 percent.
new text end

new text begin (c) An electric utility may not use energy used to satisfy the solar energy standard
under this section to satisfy its standard obligation under section 216B.1691, nor may
energy used to satisfy the standard under section 216B.1691 be used to satisfy the standard
under this section.
new text end

new text begin Subd. 3. new text end

new text begin Use of integrated resource planning process. new text end

new text begin Except if inconsistent with
this section, the commission may modify or delay implementation of a standard obligation
in the same manner as in section 26B.1691, subdivision 2b, as a part of an integrated
resource planning proceeding under section 216B.2422, or in other proceedings before the
commission. The order to delay or modify shall not be considered advisory with respect
to any electric utility. This subdivision shall not be construed to limit the commission's
authority to modify or delay implementation of a standard obligation in other proceedings
before it.
new text end

new text begin Subd. 4. new text end

new text begin Utility plans filed with commission. new text end

new text begin Each electric utility shall report
to the commission on its plans, activities, and progress demonstrating the efforts made
towards complying with this section. The report shall be included in its filings under
section 216B.2422 or in a separate report submitted to the commission every two years,
whichever is more frequent. In its resource plan or separate report, each electric utility
shall provide a description of:
new text end

new text begin (1) the status of the utility's solar energy mix relative to the standards;
new text end

new text begin (2) efforts taken to meet the standards;
new text end

new text begin (3) any obstacles encountered or anticipated in meeting the standards;
new text end

new text begin (4) potential solutions to the identified obstacles; and
new text end

new text begin (5) an estimation of the rate impact related to measures taken by the electric utility
necessary to comply with this section. The rate impact estimate must be for wholesale
rates and, if the electric utility makes retail sales, an estimate shall also be completed
for the impact on the electric utility's retail rates. An estimation of rate impacts must
also account for acquisition of energy capacity, distribution, and transmission upgrades
avoided as a result of the standards.
new text end

new text begin Subd. 5. new text end

new text begin Renewable energy credits. new text end

new text begin In lieu of generating or procuring energy
directly to satisfy the solar electricity standard of this section, an electric utility may
use renewable energy credits that originate from a solar electricity generator to satisfy
the standard. In doing so, an electric utility must follow protocols established by the
commission under section 216B.1691, subdivision 4 for registering, tracking, and retiring
credits.
new text end

new text begin Subd. 6. new text end

new text begin Compliance; penalties. new text end

new text begin (a) The commission must regularly investigate
whether an electric utility is in compliance with its standard obligation under subdivision 2.
new text end

new text begin (b) If the commission finds noncompliance, it may order the electric utility to
construct solar energy facilities, purchase solar energy, purchase renewable energy credits
generated by solar energy, or engage in other activities to achieve compliance. If an
electric utility fails to comply with an order under this subdivision, the commission may
impose a financial penalty on the electric utility in an amount not to exceed the estimated
cost of the electric utility to achieve compliance. The penalty may not exceed the lesser of
the cost of constructing facilities or purchasing renewable energy credits necessary for the
electric utility to achieve compliance. The commission must deposit financial penalties
imposed under this subdivision in the energy and conservation account established in the
special revenue fund under section 216B.241, subdivision 2a.
new text end

new text begin (c) Nothing in this subdivision shall be construed to limit any other authority the
commission possesses to enforce this section.
new text end

ARTICLE 3

SOLAR ENERGY PRODUCTION INCENTIVE

Section 1.

new text begin [216C.411] SOLAR ACCOUNT DEPOSIT AND PRODUCTION
INCENTIVE.
new text end

new text begin Subdivision 1. new text end

new text begin Deposit. new text end

new text begin Each public utility, cooperative electric association, and
municipal utility shall create an account to pay incentives for electricity generated by
solar photovoltaic devices as specified in this section. A utility or association shall each
year deposit one percent of the utility's or association's gross annual retail electric sales
during the preceding calendar year. Each utility and association must report annually by
August 1 to the Division of Energy Resources, Department of Commerce, on the amount
deposited in the account in the previous year and the solar photovoltaic energy incented in
the previous year.
new text end

new text begin Subd. 2. new text end

new text begin Incentive payment. new text end

new text begin (a) Incentive payments must, if sufficient funds are in
the account and only to the extent of those funds, be made under this section only to an
owner of a solar photovoltaic device who is a customer of the utility or association, who has:
new text end

new text begin (1) submitted to the utility or association on a form prescribed by it, an application
to receive the incentive; and
new text end

new text begin (2) received from the utility or association in writing a determination that the solar
photovoltaic device qualifies for the incentive.
new text end

new text begin (b) A solar photovoltaic device with a capacity in excess of two megawatts is
ineligible to receive incentive payments under this section.
new text end

new text begin (c) A utility or association that owns a solar photovoltaic device is not eligible
for an incentive.
new text end

new text begin Subd. 3. new text end

new text begin Eligibility window; payment duration. new text end

new text begin (a) Payments may be made under
this section only for electricity generated from a solar photovoltaic device that first begins
generating electricity after January 1, 2014.
new text end

new text begin (b) Payment of the incentive begins and runs consecutively from the date the solar
photovoltaic device begins generating electricity.
new text end

new text begin (c) The owner of a solar photovoltaic device may receive payments under this
section for a device for a period of 20 years. No payment may be made under this section
for electricity generated after December 31, 2049.
new text end

new text begin Subd. 4. new text end

new text begin Amount of payment. new text end

new text begin (a) An incentive payment is based on the number of
kilowatt hours of electricity generated. The per-kilowatt-hour amount of the payment is at
a level determined by the commissioner. The commissioner shall set the rate at a level
the commissioner determines necessary to incent solar photovoltaic device installation
at the lowest incentive rate consistent with maximum installation of devices considering
available account resources to pay the incentive.
new text end

new text begin (b) By January 1, 2015, and every January 1 thereafter through 2049, the
commissioner shall make a determination as to whether the incentive needs to be
adjusted. In making the determination, the new text end new text begin commissioner shall solicit comments and
recommendations from utilities, associations, ratepayers, and other interested parties.
After considering the comments and recommendations, the commissioner may adjust
the incentive rate.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective January 1, 2014.
new text end

ARTICLE 4

COMMUNITY SOLAR GENERATING FACILITY

Section 1.

new text begin [216B.1641] DEFINITIONS.
new text end

new text begin Subdivision 1. new text end

new text begin Scope. new text end

new text begin For the purposes of sections 216B.1641 to 216B.1644, the
following definitions have the meanings given.
new text end

new text begin Subd. 2. new text end

new text begin Community solar generating facility. new text end

new text begin "Community solar generating
facility" means a facility:
new text end

new text begin (1) that generates electricity by means of a solar photovoltaic device that has a
capacity of less than two megawatts;
new text end

new text begin (2) that is interconnected with a utility's distribution system under the jurisdiction
of the commission;
new text end

new text begin (3) that is located in the electric service area of the utility with which it is
interconnected;
new text end

new text begin (4) whose subscribers purchase, under long-term contract with the community solar
generating facility, the right to consume the electricity generated from a specified portion
of the facility's generating capacity;
new text end

new text begin (5) that is not owned by a utility; and
new text end

new text begin (6) that has at least two subscribers.
new text end

new text begin Subd. 3. new text end

new text begin Facility manager. new text end

new text begin "Facility manager" means an entity that manages a
community solar generating facility for the benefit of subscribers and may, in addition,
develop, construct, own, or operate the community solar generating facility. A facility
manager may not be a utility, but may be:
new text end

new text begin (1) a person whose sole purpose is to beneficially own and operate a community
solar generating facility;
new text end

new text begin (2) a Minnesota nonprofit corporation organized under chapter 317A;
new text end

new text begin (3) a Minnesota cooperative association organized under chapter 308A or 308B;
new text end

new text begin (4) a Minnesota political subdivision or local government, including, but not limited
to, a county, statutory or home rule charter city, town, school district, public or private
higher education institution, or any other local or regional governmental organization such
as a board, commission, or association; or
new text end

new text begin (5) a tribal council.
new text end

new text begin Subd. 4. new text end

new text begin Renewable energy credit. new text end

new text begin "Renewable energy credit" has the meaning
given in section 216B.1691, subdivision 1, paragraph (d).
new text end

new text begin Subd. 5. new text end

new text begin Solar photovoltaic device. new text end

new text begin "Solar photovoltaic device" has the meaning
given in section 216C.06, subdivision 16.
new text end

new text begin Subd. 6. new text end

new text begin Subscriber. new text end

new text begin "Subscriber" means a retail customer of a utility who owns
one or more subscriptions of a community solar generating facility interconnected with
that utility. A facility manager may be a subscriber.
new text end

new text begin Subd. 7. new text end

new text begin Subscription. new text end

new text begin "Subscription" means a contract between a subscriber and a
community solar generating facility that has a term of no less than 20 years and that
provides to the subscriber a portion of the generation of the community solar generating
facility and a corresponding proportion of the electricity generated by the community
solar generating facility.
new text end

new text begin Subd. 8. new text end

new text begin Utility. new text end

new text begin "Utility" means a utility subject to section 216B.164.
new text end

Sec. 2.

new text begin [216B.1642] SUBSCRIPTIONS.
new text end

new text begin Subdivision 1. new text end

new text begin Presale of subscriptions. new text end

new text begin A community solar generating facility
may not commence construction of the facility until contracts have been executed for
subscriptions, excluding the subscription of the facility manager, that represent 80 percent
of the proposed nameplate capacity of the community solar generating facility.
new text end

new text begin Subd. 2. new text end

new text begin Size. new text end

new text begin (a) A subscription must be a portion of the community solar generating
facility's nameplate capacity sized so as to produce no more than 120 percent of the annual
average amount of electricity consumed over the previous three years at the site where the
subscriber's meter is located. If the site is newly constructed, the subscription must be sized
based on 120 percent of the average annual amount of electricity consumed by a facility of
similar size and type in the utility's service area, as determined by the facility manager.
new text end

new text begin (b) A subscriber may not own one or more subscriptions whose total capacity
exceeds the maximum capacity allowed for a qualifying facility subject to section
216B.164, subdivision 3.
new text end

new text begin (c) A facility manager may not own subscriptions whose total capacity exceeds the
maximum subscription size allowed under paragraph (a) plus ten percent of the remaining
available nameplate capacity in the community solar generating facility, subject to the
limit in paragraph (b).
new text end

new text begin (d) The maximum subscription size for a subscriber consuming electricity generated
from an eligible energy technology, as defined in section 216B.1691, subdivision 1, at any
time during the term of the subscriber's subscription, is the maximum subscription size
allowed under paragraph (a) minus the nameplate capacity of the eligible energy technology
device providing electricity to the subscriber, subject to the limit in paragraph (b).
new text end

new text begin Subd. 3. new text end

new text begin Certification. new text end

new text begin Prior to the sale of a subscription, a facility manager
must provide certification to the subscriber signed by the facility manager under penalty
of perjury:
new text end

new text begin (1) identifying the rate of insolation at the community solar generating facility;
new text end

new text begin (2) certifying that the solar photovoltaic devices employed by the community solar
generating facility to generate electricity have an electrical energy degradation rate of no
more than 0.5 percent annually; and
new text end

new text begin (3) certifying that the community solar generating facility is in full compliance with
all applicable federal and state utility, securities, and tax laws.
new text end

new text begin Subd. 4. new text end

new text begin On-site subscriber. new text end

new text begin A subscriber who owns the property on which
a community solar generating facility is located has no more rights with respect to
subscription size or price than any other subscriber.
new text end

new text begin Subd. 5. new text end

new text begin Subscription prices. new text end

new text begin The price for a subscription to a community solar
generating facility is not subject to regulation by the commission and is negotiated
between the prospective subscriber and the facility manager.
new text end

new text begin Subd. 6. new text end

new text begin Subscription transfer. new text end

new text begin A subscriber that terminates the contract between
the subscriber and the community solar generating facility must transfer the subscription
to a person eligible to be a subscriber or to the facility manager at a price negotiated
by both parties.
new text end

new text begin Subd. 7. new text end

new text begin New subscribers. new text end

new text begin Within 30 days of the execution of a contract between the
community solar generating facility and a new subscriber, the facility manager shall submit
the following information to the utility serving the community solar generating facility:
new text end

new text begin (1) the new subscriber's name, address, number of meters, and utility customer
account; and
new text end

new text begin (2) the share of the community solar generating facility's nameplate capacity owned
by the new subscriber.
new text end

new text begin Subd. 8. new text end

new text begin Meter change. new text end

new text begin A subscriber that moves to a different property served by
the community solar generating facility from the property at which the subscriber resided
at the time the contract between the subscriber and the community solar generating facility
was executed, or that changes the number of meters attached to the subscriber's account,
must notify the facility manager within 30 days of the change.
new text end

new text begin Subd. 9. new text end

new text begin Disputes. new text end

new text begin The dispute resolution provisions available under section
216B.164 shall be used to resolve disputes between a facility manager and the utility
serving the community solar generating facility.
new text end

Sec. 3.

new text begin [216B.1643] DISPOSITION OF ELECTRICITY GENERATED.
new text end

new text begin Subdivision 1. new text end

new text begin Allocation. new text end

new text begin (a) The total amount of electricity available for allocation
to all subscribers of a community solar generating facility shall be determined by a
production meter installed by the utility.
new text end

new text begin (b) The total amount of electricity available to a subscriber shall be the total amount
of electricity available for allocation to all subscribers of a community solar generating
facility prorated by a subscriber's subscription size in relation to the nameplate capacity of
the community solar generating facility.
new text end

new text begin (c) A subscriber may not resell electricity governed by the subscriber's contract
with a community solar generating facility.
new text end

new text begin (d) All electricity generated by a community solar generating facility that is not
consumed by subscribers must be sold to the utility interconnected with the community
solar generating facility.
new text end

new text begin Subd. 2. new text end

new text begin Utility purchases. new text end

new text begin The utility to which the community solar generating
facility is interconnected shall purchase all electricity generated by the community solar
generating facility that is not consumed by subscribers. The price paid to the community
solar generating facility by the utility is governed by section 216B.164, or any law that
governs the price a utility must pay to purchase electricity from a solar photovoltaic device.
new text end

new text begin Subd. 3. new text end

new text begin Interconnection. new text end

new text begin The commission shall establish uniform fees for the
interconnection of a community solar generating facility with a utility.
new text end

new text begin Subd. 4. new text end

new text begin Nonutility status. new text end

new text begin Notwithstanding section 216B.02, a community solar
generating facility is not a public utility.
new text end

Sec. 4.

new text begin [216B.1644] BILLING.
new text end

new text begin Subdivision 1. new text end

new text begin Billing procedure. new text end

new text begin A subscriber to a community solar generating
facility must be:
new text end

new text begin (1) charged by the utility interconnected with the community solar generating
facility the utility's applicable rate schedule for sales to that class of customer for all
electricity consumed by the subscriber;
new text end

new text begin (2) paid by the utility the maximum rate allowable under section 216B.164, or
any other law that may govern the price a utility must pay to purchase electricity from
a solar photovoltaic device, for a portion of all electricity the utility purchases from
the community solar generating facility that is equal to the ratio of the subscriber's
subscription to the nameplate capacity of the community solar generating facility;
new text end

new text begin (3) provided by the utility with a monthly bill that contains, in addition to the
amounts in clauses (1) and (2), the net amount owed to the utility or net credit realized by
the owner for that month and on a year-to-date basis; and
new text end

new text begin (4) provided by the utility with a meter that allows for the separate calculation of the
amount of electricity consumed and generated at the property.
new text end

new text begin Subd. 2. new text end

new text begin Billing system. new text end

new text begin The Department of Commerce shall, by January 1, 2014,
establish a uniform administrative system to credit the utility accounts of subscribers to a
community solar generating facility. In determining the uniform administrative system, the
commission shall solicit comments and recommendations from utilities, ratepayers, and
other interested parties, and shall review commercially available administrative systems
and administrative systems used in jurisdictions where entities similar to community
solar generating facilities are operating.
new text end

new text begin Subd. 3. new text end

new text begin Commission proceeding; rate adjustment. new text end

new text begin By September 1, 2014, the
commission shall initiate a proceeding to examine whether the rate paid by a utility to
purchase energy from a community solar generating facility under section 216B.1643,
subdivision 2, should be adjusted to reflect the actual fixed costs incurred by a utility to
provide service to a community solar generating facility.
new text end

ARTICLE 5

MADE IN MINNESOTA INCENTIVE

Section 1.

new text begin [216C.411] DEFINITIONS.
new text end

new text begin For the purposes of sections 216C.411 to 216C.415, the following terms have the
meanings given.
new text end

new text begin (a) "Made in Minnesota" means the manufacture in this state of solar photovoltaic
modules:
new text end

new text begin (1) at a manufacturing facility located in Minnesota that is registered and authorized
to manufacture and apply the UL 1703 certification mark to solar photovoltaic modules by
Underwriters Laboratory (UL), CSA International, Intertek, or an equivalent UL-approved
independent certification agency;
new text end

new text begin (2) that bear UL 1703 certification marks from UL, CSA International, Intertek, or
an equivalent UL-approved independent certification agency, which must be physically
applied to the modules at a manufacturing facility described in clause (1); and
new text end

new text begin (3) that are manufactured in Minnesota:
new text end

new text begin (i) by manufacturing processes that must include tabbing, stringing, and lamination;
or
new text end

new text begin (ii) by interconnecting low-voltage direct current photovoltaic elements that produce
the final useful photovoltaic output of the modules.
new text end

new text begin A solar photovoltaic module that is manufactured by attaching microinverters, direct
current optimizers, or other power electronics to a laminate or solar photovoltaic
module that has received UL 1703 certification marks outside Minnesota from UL, CSA
International, Intertek, or an equivalent UL-approved independent certification agency is
not "Made in Minnesota" under this paragraph.
new text end

new text begin (b) "Solar photovoltaic module" has the meaning given in section 116C.7791,
subdivision 1, paragraph (e).
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 2.

new text begin [216C.412] "MADE IN MINNESOTA" SOLAR ENERGY PRODUCTION
INCENTIVE ACCOUNT.
new text end

new text begin Subdivision 1. new text end

new text begin Account established; account management. new text end

new text begin A "Made in
Minnesota" solar energy production incentive account is established as a separate account
in the special revenue fund in the state treasury. The commissioner of management
and budget shall credit to the account the amounts authorized under this section and
appropriations and transfers to the account. Earnings, such as interest, dividends, and
any other earnings arising from account assets, must be credited to the account. Funds
remaining in the account at the end of a fiscal year do not cancel to the general fund but
remain in the account. The commissioner shall manage the account. There is annually
appropriated from the account to the commissioner money sufficient to make the payments
required by section 216C.415 and to administer sections 216C.412 to 216C.415. The
commissioner shall manage payments from the account and may adjust incentive payment
amounts otherwise required under section 216C.415 so that funds are available in the
account to make payments, adjusted or otherwise, until the time payments cease under
section 216C.415.
new text end

new text begin Subd. 2. new text end

new text begin Purpose. new text end

new text begin The purpose of the account is to pay the "Made in Minnesota"
solar renewable energy production incentive to owners of solar photovoltaic modules that
have received a "Made in Minnesota" certificate from the commissioner under section
216C.413.
new text end

new text begin Subd. 3. new text end

new text begin Allocations; deposit. new text end

new text begin (a) Beginning January 1, 2014, and each January
1 thereafter, through 2024, each public utility, cooperative electric association, and
municipal utility subject to section 216B.241 must annually pay to the commissioner five
percent of the amount it was required to spend in the previous year, based on its sale of
electricity, on energy conservation improvements under section 216B.241, subdivisions 1a
and 1b. The commissioner shall, upon receipt of the funds, deposit them in the account
established in subdivision 1.
new text end

new text begin (b) Notwithstanding section 116C.779, subdivision 1, paragraph (g), beginning
January 1, 2014, and continuing each January 1 until 2024, the utility that manages the
account under section 116C.779 must annually pay from that account to the commissioner
an amount that, when added to the amount paid to the commissioner under paragraph (a),
totals $15,000,000 for the purposes of this section. The commissioner shall, upon receipt
of the funds, deposit them in the account established in subdivision 1.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 3.

new text begin [216C.413] "MADE IN MINNESOTA" SOLAR ENERGY PRODUCTION
INCENTIVE; QUALIFICATION.
new text end

new text begin Subdivision 1. new text end

new text begin Application. new text end

new text begin A manufacturer of solar photovoltaic modules seeking
to qualify those modules as eligible to receive the "Made in Minnesota" solar energy
production incentive must submit an application to the commissioner on a form prescribed
by the commissioner. The application must contain:
new text end

new text begin (1) a technical description of the solar photovoltaic module and the processes used
to manufacture it, excluding proprietary details;
new text end

new text begin (2) documentation that the solar photovoltaic module meets all the required
applicable parts of the "Made in Minnesota" definition in section 216C.411, including
evidence of the UL 1703 right to mark for all solar photovoltaic modules seeking to
qualify as "Made in Minnesota";
new text end

new text begin (3) documentation, including, but not limited to, purchase orders, invoices, and
shipping documents, establishing:
new text end

new text begin (i) the origin of components used to manufacture the solar photovoltaic modules;
new text end

new text begin (ii) the costs of raw materials, direct manufacturing labor in Minnesota, and
overhead to manufacture the solar photovoltaic module; and
new text end

new text begin (iii) the total costs of manufacturing the solar photovoltaic module, expressed in
dollars per watts-peak governed by Standard Test Conditions under UL 1703;
new text end

new text begin (4) any additional information requested by the commissioner of commerce; and
new text end

new text begin (5) certification signed by the chief executive officer of the manufacturing company
attesting to the truthfulness of the contents of the application and supporting materials
under penalty of perjury.
new text end

new text begin Subd. 2. new text end

new text begin Plant inspection. new text end

new text begin After reviewing the application materials submitted
under subdivision 1, the commissioner, or the commissioner's designee, shall physically
inspect the manufacturer's Minnesota plant to verify that the manufacturing processes meet
the requirements of subdivision 1. The commissioner shall contract with an independent
technical advisor with expertise in the manufacture of solar photovoltaic modules to
accompany the commissioner, or the commissioner's designee, on the inspection. The
commissioner may assess a fee on the manufacturer that is equal to the costs billed by the
contractor for the contractor's services with respect to the inspection, including review of
the application and the writing of a postinspection report.
new text end

new text begin Subd. 3. new text end

new text begin Certification. new text end

new text begin If the commissioner determines that a manufacturer's solar
photovoltaic module meets the definition of "Made in Minnesota" in section 216C.411, the
commissioner shall issue the manufacturer a "Made in Minnesota" certificate containing
the name and model numbers of the certified solar photovoltaic modules and the date of
certification. A copy of the certificate must be provided to each purchaser of the solar
photovoltaic module.
new text end

new text begin Subd. 4. new text end

new text begin Reinspection. new text end

new text begin The commissioner may reinspect the manufacturing facility
of a manufacturer who has received certification under subdivision 3 at any time, but
must do so at least every two years.
new text end

new text begin Subd. 5. new text end

new text begin Notice of change; certification review. new text end

new text begin A manufacturer that has received
a "Made in Minnesota" certificate under subdivision 3 must notify the commissioner
of commerce at least 60 days in advance of any changes in the components used
in production, manufacturing processes, or any other changes that could affect the
manufacturer's solar photovoltaic modules' certification as "Made in Minnesota," and
must submit to the commissioner detailed information describing and documenting the
changes. The commissioner shall, after reviewing the submitted material and, if necessary,
conducting a reinspection of the manufacturer's manufacturing facility, determine
whether the proposed changes warrant revoking the manufacturer's "Made in Minnesota"
certification. Within ten days of making a determination under this subdivision, the
commissioner shall inform the manufacturer of the determination in writing.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 4.

new text begin [216C.414] "MADE IN MINNESOTA" SOLAR ENERGY PRODUCTION
INCENTIVE; CALCULATION.
new text end

new text begin Subdivision 1. new text end

new text begin Components. new text end

new text begin (a) By October 1, 2013, the Department of Commerce
shall calculate a "Made in Minnesota" solar energy production incentive for the purpose of
the incentive payments under section 216C.415 for each solar photovoltaic module that
has received certification under section 216C.413 as being manufactured in Minnesota.
The "Made in Minnesota" solar energy production incentive is a performance-based
financial incentive expressed as a per kilowatt-hour amount that, when added to the
amount paid by a utility to the owner of a solar photovoltaic module under section
216B.164 or other rate approved by the commission, reduces the payback of the owner's
investment in the solar photovoltaic modules to a period of ten years. The Department of
Commerce shall calculate the "Made in Minnesota" solar energy production incentive by
utilizing a financial model composed of the following components:
new text end

new text begin (1) an estimate of the installed cost per kilowatt-direct current, based on the cost data
supplied by the manufacturer in the application submitted under section 216C.413, and an
estimate of the average installation cost based on a representative sample of Minnesota
solar photovoltaic projects installed by installers certified by the North American Board of
Certified Energy Practitioners and the Minnesota Joint Apprenticeship Training Committee;
new text end

new text begin (2) the average insolation rate in Minnesota;
new text end

new text begin (3) an estimate of the decline in the generation efficiency of the solar photovoltaic
modules over time;
new text end

new text begin (4) the rate paid by utilities to owners of solar photovoltaic modules under section
216B.164 or other law;
new text end

new text begin (5) applicable federal tax incentives for installing solar photovoltaic modules;
new text end

new text begin (6) the maximum amount of debt the project can support based on current
commercial borrowing rates and a ten-year term; and
new text end

new text begin (7) the estimated levelized cost per kilowatt-hour generated.
new text end

new text begin (b) In determining the amount of the incentive, the commissioner shall consider,
after consulting with Minnesota solar photovoltaic manufacturers, the degree to which
solar photovoltaic modules contain components manufactured in Minnesota; the solar
photovoltaic modules' estimated length of life, taking into account design, quality of
materials used, and independent testing results; UL 1703 or equivalent fire safety ratings
and additional integrated safety features; and the ability to use the solar photovoltaic
modules in innovative applications, including for purposes other than solely electric
generation.
new text end

new text begin (c) "Made in Minnesota" solar photovoltaic modules shall receive:
new text end

new text begin (1) 100 percent of the incentive calculated in paragraph (a) if they are manufactured
under the process described in section 216C.411, paragraph (a), clause (3), item (i); or
new text end

new text begin (2) 65 percent of the incentive calculated in paragraph (a) if they are manufactured
under the process described in section 216C.411, paragraph (a), clause (3), item (ii).
new text end

new text begin Subd. 2. new text end

new text begin Notice; recalculation. new text end

new text begin A manufacturer that has received a "Made in
Minnesota" certificate under section 216C.413 must notify the commissioner at least 60
days in advance of any changes in the parameters listed in subdivision 1 that may affect the
calculation of the "Made in Minnesota" solar energy production incentive, and must submit
to the commissioner detailed information describing and documenting the changes. The
commissioner, after reviewing the submitted material, shall determine whether the changes
warrant recalculation of the "Made in Minnesota" solar energy production incentive for
the manufacturer's solar photovoltaic modules and, if so, shall conduct the recalculation.
Within ten days of recalculating the incentive, the commissioner shall inform the
manufacturer of the recalculation in writing. A recalculated incentive is effective 90 days
after the first day of the first month following the date of notice of the recalculation.
new text end

new text begin Subd. 3. new text end

new text begin Annual review. new text end

new text begin Unless a review of the calculation of the "Made in
Minnesota" solar energy production incentive has been conducted under subdivision 2
in a calendar year, the commissioner of commerce shall annually review the calculation
of the "Made in Minnesota" solar energy production incentive for each manufacturer
receiving the incentive. As part of the review, the commissioner of commerce may
require the manufacturer to submit current information to support the calculation of the
"Made in Minnesota" solar energy production incentive. A manufacturer shall submit the
information requested by the commissioner in a timely fashion.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 5.

new text begin [216C.415] "MADE IN MINNESOTA" SOLAR ENERGY PRODUCTION
INCENTIVE; PAYMENT.
new text end

new text begin Subdivision 1. new text end

new text begin Incentive payment. new text end

new text begin Incentive payments may be made under this
section only to an owner of solar photovoltaic modules with a total nameplate capacity
below 100 kilowatts who:
new text end

new text begin (1) has submitted to the commissioner, on a form established by the commissioner,
an application to receive the incentive;
new text end

new text begin (2) has received from the commissioner a "Made in Minnesota" certificate under
section 216C.413; and
new text end

new text begin (3) has installed on or adjacent to residential or commercial property solar
photovoltaic modules that are generating electricity and has received a "Made in
Minnesota" certificate under section 216C.413.
new text end

new text begin Subd. 2. new text end

new text begin Eligibility window; payment duration. new text end

new text begin (a) Payments may be made
under this section only for electricity generated from solar photovoltaic modules that are
operational and generating electricity from January 1, 2014, through December 31, 2034.
new text end

new text begin (b) Payment of the incentive begins and runs consecutively from the date the solar
photovoltaic modules begin generating electricity.
new text end

new text begin (c) An owner of solar photovoltaic modules shall receive payments under this
section for a period of ten years.
new text end

new text begin (d) No payment may be made under this section for electricity generated after
December 31, 2034.
new text end

new text begin (e) No owner of solar photovoltaic modules may first begin to receive payments
under this section after December 31, 2024.
new text end

new text begin Subd. 3. new text end

new text begin Amount of payment. new text end

new text begin (a) An incentive payment is based on the number
of kilowatt-hours of electricity generated by the solar photovoltaic modules installed at
a single property, except as provided in paragraph (b). The per-kilowatt amount of the
payment is the "Made in Minnesota" solar energy production incentive for those modules
determined by the commissioner of commerce under section 216C.414.
new text end

new text begin (b) The owner of solar photovoltaic modules eligible to receive incentives under this
section and whose total nameplate capacity exceeds 40 kilowatts DC but is less than 100
kilowatts DC shall be paid an incentive according to the formula:
new text end

new text begin I = (M) x [(P kWh AC) ÷ (C kW DC)] x (40 kW DC), where:
new text end

new text begin (1) I equals the incentive paid to an owner of solar photovoltaic modules whose
nameplate capacity exceeds 40 kilowatts DC, but is less than 100 kilowatts DC;
new text end

new text begin (2) M equals the "Made in Minnesota" solar energy production incentive calculated
under section 216C.414;
new text end

new text begin (3) P equals the number of kilowatt-hours AC generated by the solar photovoltaic
modules whose nameplate capacity exceeds 40 kilowatts DC, but is less than 100
kilowatts DC; and
new text end

new text begin (4) C equals the nameplate capacity of the solar photovoltaic modules whose
nameplate capacity exceeds 40 kilowatts DC, but is less than 100 kilowatts DC.
new text end

new text begin (c) For purposes of this subdivision, (i) "AC" means alternating current; (ii) "DC"
means direct current; (iii) "kWh" means kilowatt-hours; and (iv) "kW" means kilowatts.
new text end

new text begin Subd. 4. new text end

new text begin Allocation of payments. new text end

new text begin (a) Fifty percent of the funds deposited in the
account established in section 216C.412 available each year to pay incentives shall be for
owners of eligible solar photovoltaic modules installed on residential property, and 50
percent shall be for owners of eligible solar photovoltaic modules installed on commercial
property.
new text end

new text begin (b) The commissioner may not award more than 25 percent of the annual
contribution made by the public utility that owns a nuclear generating plant in this state
to the account established in section 216C.412 to owners of solar photovoltaic modules
that are installed in buildings located outside the area where that public utility provides
electric service in this state.
new text end

new text begin (c) The commissioner shall endeavor to geographically distribute incentives paid
under this section to owners of solar photovoltaic modules installed throughout the state.
new text end

new text begin (d) For purposes of this subdivision:
new text end

new text begin (1) "residential property" means residential real estate that is occupied and used as a
homestead by its owner or by a renter and includes "multifamily housing development"
as defined in section 462C.02, subdivision 5, except that residential property on which
solar photovoltaic modules (i) whose capacity exceeds 10 kilowatts is installed; or (ii)
connected to a utility's distribution system and whose electricity is purchased by several
residents, each of whom own a share of the electricity generated, shall be deemed
commercial property; and
new text end

new text begin (2) "commercial property" means real property on which is located a business,
government, or nonprofit establishment.
new text end

new text begin Subd. 5. new text end

new text begin Limitation. new text end

new text begin An owner receiving an incentive payment under this section
may not receive a rebate under section 116C.7791 for the same solar photovoltaic modules.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 6. new text begin VALUE OF ON-SITE ENERGY STORAGE STUDY.
new text end

new text begin (a) The commissioner of commerce shall contract with an independent consultant
selected through a request for proposal process to produce a report analyzing the potential
costs and benefits of installing utility-managed energy storage modules in residential and
commercial buildings in this state. The study must:
new text end

new text begin (1) estimate the potential value of on-site energy storage modules as a
load-management tool to reduce costs for individual customers and for the utility,
including, but not limited to, reductions in energy, particularly peaking, costs, and
capacity costs;
new text end

new text begin (2) examine the interaction of energy storage modules with on-site solar photovoltaic
modules; and
new text end

new text begin (3) analyze existing barriers to the installation of on-site energy storage modules
by utilities, and examine strategies and design potential economic incentives, including
using utility funds expended under Minnesota Statutes, section 216B.241, to overcome
those barriers.
new text end

new text begin By January 1, 2014, the commissioner of commerce shall submit the study to the chairs
and ranking minority members of the legislative committees with jurisdiction over energy
policy and finance.
new text end

new text begin (b) The commissioner of commerce shall assess an amount, not to exceed $100,000,
necessary under Minnesota Statutes, section 216B.241, subdivision 1e, for the purpose of
completing the study described in this section.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 7. new text begin VALUE OF SOLAR THERMAL STUDY.
new text end

new text begin (a) The commissioner of commerce shall contract with an independent consultant
selected through a request for proposal process to produce a report analyzing the potential
costs and benefits of expanding the installation of solar thermal projects, as defined in
Minnesota Statutes, section 216B.2411, subdivision 2, in residential and commercial
buildings in this state. The study must examine the potential for solar thermal projects to
reduce heating and cooling costs for individual customers and to reduce utilities' costs.
The study must also analyze existing barriers to the installation of solar thermal projects
by utilities, and examine strategies and design potential economic incentives, including
using utility funds expended under Minnesota Statutes, section 216B.241, to overcome
those barriers. By January 1, 2014, the commissioner of commerce shall submit the study
to the chairs and ranking minority members of the legislative committees with jurisdiction
over energy policy and finance.
new text end

new text begin (b) The commissioner of commerce shall assess an amount, not to exceed $100,000,
necessary under Minnesota Statutes, section 216B.241, subdivision 1e, for the purpose of
completing the study described in this section.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

ARTICLE 6

TRANSMISSION COST RECOVERY

Section 1.

Minnesota Statutes 2012, section 216B.16, subdivision 7b, is amended to
read:

Subd. 7b.

Transmission cost adjustment.

(a) Notwithstanding any other provision
of this chapter, the commission may approve a tariff mechanism for the automatic annual
adjustment of charges for the Minnesota jurisdictional costs new text begin net of associated revenues new text end of new text begin :
new text end

(i) new transmission facilities that have been separately filed and reviewed and
approved by the commission under section 216B.243 or are certified as a priority project
or deemed to be a priority transmission project under section 216B.2425; deleted text begin and deleted text end

(ii) new text begin new transmission facilities approved by the regulatory commission of the state
in which the new transmission facilities are to be constructed, to the extent approval
is required by the laws of that state, and determined by the Midwest Independent
Transmission System Operator to benefit the utility or integrated transmission system; and
new text end

new text begin (iii) new text end charges incurred by a utility new text begin under a federally approved tariff new text end that accrue
from other transmission owners' regionally planned transmission projects that have been
determined by the Midwest Independent new text begin Transmission new text end System Operator to benefit the
utility deleted text begin , as provided for under a federally approved tariff deleted text end new text begin or integrated transmission system new text end .

(b) Upon filing by a public utility or utilities providing transmission service, the
commission may approve, reject, or modify, after notice and comment, a tariff that:

(1) allows the utility to recover on a timely basis the costs net of revenues of
facilities approved under section 216B.243 or certified or deemed to be certified under
section 216B.2425 or exempt from the requirements of section 216B.243;

(2) allows the new text begin utility to recover new text end charges incurred deleted text begin by a utility deleted text end new text begin under a federally
approved tariff new text end that accrue from other transmission owners' regionally planned
transmission projects that have been determined by the Midwest Independent new text begin Transmission
new text end System Operator to benefit the utility deleted text begin , as provided for under a federally approved tariff
deleted text end new text begin or integrated transmission system new text end . These charges must be reduced or offset by revenues
received by the utility and by amounts the utility charges to other regional transmission
owners, to the extent those revenues and charges have not been otherwise offset;

(3) new text begin allows the utility to recover on a timely basis the costs net of revenues of facilities
approved by the regulatory commission of the state in which the new transmission
facilities are to be constructed and determined by the Midwest Independent Transmission
System Operator to benefit the utility or integrated transmission system;
new text end

new text begin (4) new text end allows a return on investment at the level approved in the utility's last general
rate case, unless a different return is found to be consistent with the public interest;

deleted text begin (4) deleted text end new text begin (5) new text end provides a current return on construction work in progress, provided that
recovery from Minnesota retail customers for the allowance for funds used during
construction is not sought through any other mechanism;

deleted text begin (5) deleted text end new text begin (6) new text end allows for recovery of other expenses if shown to promote a least-cost project
option or is otherwise in the public interest;

deleted text begin (6) deleted text end new text begin (7) new text end allocates project costs appropriately between wholesale and retail customers;

deleted text begin (7) deleted text end new text begin (8) new text end provides a mechanism for recovery above cost, if necessary to improve the
overall economics of the project or projects or is otherwise in the public interest; and

deleted text begin (8) deleted text end new text begin (9) new text end terminates recovery once costs have been fully recovered or have otherwise
been reflected in the utility's general rates.

(c) A public utility may file annual rate adjustments to be applied to customer bills
paid under the tariff approved in paragraph (b). In its filing, the public utility shall provide:

(1) a description of and context for the facilities included for recovery;

(2) a schedule for implementation of applicable projects;

(3) the utility's costs for these projects;

(4) a description of the utility's efforts to ensure the lowest costs to ratepayers for
the project; and

(5) calculations to establish that the rate adjustment is consistent with the terms
of the tariff established in paragraph (b).

(d) Upon receiving a filing for a rate adjustment pursuant to the tariff established in
paragraph (b), the commission shall approve the annual rate adjustments provided that,
after notice and comment, the costs included for recovery through the tariff were or are
expected to be prudently incurred and achieve transmission system improvements at the
lowest feasible and prudent cost to ratepayers.

ARTICLE 7

CERTS FUNDING

Section 1.

Minnesota Statutes 2012, section 216B.241, subdivision 1e, is amended to
read:

Subd. 1e.

Applied research and development grants.

(a) The commissioner
may, by order, approve and make grants for applied research and development projects
of general applicability that identify new technologies or strategies to maximize energy
savings, improve the effectiveness of energy conservation programs, or document
the carbon dioxide reductions from energy conservation programs. When approving
projects, the commissioner shall consider proposals and comments from utilities and
other interested parties. The commissioner may assess up to $3,600,000 annually for the
purposes of this subdivision. The assessments must be deposited in the state treasury
and credited to the energy and conservation account created under subdivision 2a. An
assessment made under this subdivision is not subject to the cap on assessments provided
by section 216B.62, or any other law.

(b) The commissioner, as part of the assessment authorized under paragraph (a),
shall annually assess and grant up to $500,000 for the purpose of subdivision 9.

new text begin (c) The commissioner, as part of the assessment authorized under paragraph (a),
each state fiscal year shall assess $500,000 for a grant to the partnership created by section
216C.385, subdivision 2. The grant must be used to exercise the powers and perform the
duties specified in section 216C.385, subdivision 3.
new text end

new text begin (d) By February 15 annually, the commissioner shall report to the chairs and ranking
minority members of the committees of the legislature with primary jurisdiction over
energy policy and energy finance on the assessments made under this subdivision for the
previous calendar year and the use of the assessment. The report must clearly describe the
activities supported by the assessment and the parties that engaged in those activities.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin Paragraph (b) is effective for assessments for state fiscal years
commencing after July 1, 2013.
new text end

ARTICLE 8

ENERGY POLICY AMENDMENT

Section 1.

Minnesota Statutes 2012, section 216B.2401, is amended to read:

216B.2401 ENERGY deleted text begin CONSERVATION deleted text end new text begin SAVINGS new text end POLICY GOAL.

new text begin The legislature finds that energy savings are an energy resource, and that
cost-effective energy savings are preferred over all other energy resources. The legislature
further finds that cost-effective energy savings should be procured systematically and
aggressively in order to reduce utility costs for businesses and residents, improve the
competitiveness and profitability of businesses, create more energy-related jobs, reduce the
economic burden of fuel imports, and reduce pollution and emissions that cause climate
change. Therefore, new text end it is the energy policy of the state of Minnesota to achieve annual
energy savings equal to new text begin at least new text end 1.5 percent of annual retail energy sales of electricity and
natural gas deleted text begin directly deleted text end through new text begin cost-effective new text end energy conservation improvement programs
and rate design, deleted text begin and indirectly through deleted text end new text begin energy efficiency achieved by energy consumers
without direct utility involvement, new text end energy codes and appliance standards, programs
designed to transform the market or change consumer behavior, energy savings resulting
from efficiency improvements to the utility infrastructure and system, and other efforts to
promote energy efficiency and energy conservation.

Sec. 2.

Minnesota Statutes 2012, section 216C.05, is amended to read:

216C.05 FINDINGS AND PURPOSE.

Subdivision 1.

Energy planning.

The legislature finds and declares that continued
growth in demand for energy will cause severe social and economic dislocations, and that
the state has a vital interest in providing for: increased efficiency in energy consumption,
the development and use of renewable energy resources wherever possible, and the
creation of an effective energy forecasting, planning, and education program.

The legislature further finds and declares that the protection of life, safety, and
financial security for citizens during an energy crisis is of paramount importance.

Therefore, the legislature finds that it is in the public interest to review, analyze, and
encourage those energy programs that will minimize the need for annual increases in fossil
fuel consumption by 1990 and the need for additional electrical generating plants, and
provide for an optimum combination of energy sources new text begin and energy conservation new text end consistent
with environmental protection and the protection of citizens.

The legislature intends to monitor, through energy policy planning and
implementation, the transition from historic growth in energy demand to a period when
demand for traditional fuels becomes stable and the supply of renewable energy resources
is readily available and adequately utilized.

new text begin The legislature further finds that for economic growth, environmental improvement,
and protection of citizens, it is in the public interest to encourage those energy programs
that will provide an optimum combination of energy resources, including energy savings.
new text end

new text begin Therefore, the legislature, through its committees, must monitor and evaluate
progress towards greater reliance on cost-effective energy efficiency and renewable
energy and lesser dependence on fossil fuels in order to reduce the economic burden
of fuel imports, diversify utility-owned and consumer-owned energy resources, reduce
utility costs for businesses and residents, improve the competitiveness and profitability of
Minnesota businesses, create more energy-related jobs that contribute to the Minnesota
economy, and reduce pollution and emissions that cause climate change.
new text end

Subd. 2.

Energy policy goals.

It is the energy policy of the state of Minnesota that:

new text begin (1) annual energy savings equal to at least 1.5 percent of annual retail energy sales of
electricity and natural gas be achieved through energy efficiency;
new text end

deleted text begin (1) deleted text end new text begin (2) new text end the per capita use of fossil fuel as an energy input be reduced by 15 percent
by the year 2015, through increased reliance on energy efficiency and renewable energy
alternatives; and

deleted text begin (2) deleted text end new text begin (3) new text end 25 percent of the total energy used in the state be derived from renewable
energy resources by the year 2025.

Sec. 3. new text begin DEPARTMENT OF COMMERCE; DIVISION OF ENERGY
RESOURCES; STUDY.
new text end

new text begin The Division of Energy Resources of the Department of Commerce must conduct
public meetings with stakeholders and members of the public and shall produce a report
on findings and legislative recommendations to accomplish the following purposes:
new text end

new text begin (1) clarify statewide energy-savings policies and utility energy-savings goals;
new text end

new text begin (2) maximize long-term cost-effective energy savings and minimize energy waste;
new text end

new text begin (3) maximize carbon reductions and economic benefits by increasing the efficiency
of all sectors of the state's energy system;
new text end

new text begin (4) minimize total utility costs and rate impacts for ratepayers in all sectors;
new text end

new text begin (5) determine appropriate funding sources for nonconservation projects and
programs, cogeneration, and combined heat and power projects; and
new text end

new text begin (6) determine the appropriate consideration in the integrated resource planning and
certificate of need processes of the requirements to meet the state's energy conservation
and renewable energy goals.
new text end

new text begin The report must be submitted by January 15, 2015, to the chairs and ranking minority
members of the committees of the legislature with primary jurisdiction over energy policy.
new text end

new text begin The division must provide public notice of the meetings.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

ARTICLE 9

EMISSION REDUCTION COST RECOVERY

Section 1.

Minnesota Statutes 2012, section 216B.1692, subdivision 1, is amended to
read:

Subdivision 1.

Qualifying projects.

new text begin (a) new text end Projects that may be approved for the
emissions reduction-rate rider allowed in this section must:

(1) be installed on existing large electric generating power plants, as defined in
section 216B.2421, subdivision 2, clause (1), that are located in the state and that are
currently not subject to emissions limitations for new power plants under the federal Clean
Air Act, United States Code, title 42, section 7401 et seq.;

(2) not increase the capacity of the existing electric generating power plant more
than ten percent or more than 100 megawatts, whichever is greater; and

(3) result in the existing plant either:

(i) complying with applicable new source review standards under the federal Clean
Air Act; or

(ii) emitting air contaminants at levels substantially lower than allowed for new
facilities by the applicable new source performance standards under the federal Clean
Air Act; or

(iii) reducing emissions from current levels at a unit to the lowest cost-effective level
when, due to the age or condition of the generating unit, the public utility demonstrates
that it would not be cost-effective to reduce emissions to the levels in item (i) or (ii).

new text begin (b) Notwithstanding paragraph (a), a project may be approved for the emission
reduction rate rider allowed in this section if the project is to be installed on existing
large electric generating power plants, as defined in section 216B.2421, subdivision 2,
clause (1), that are located outside the state and are needed to comply with state or federal
air quality standards, but only if the project has received an advance determination of
prudence from the commission under section 216B.1695.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 2.

Minnesota Statutes 2012, section 216B.1692, is amended by adding a
subdivision to read:

new text begin Subd. 1a. new text end

new text begin Exemption. new text end

new text begin Subdivisions 2, 4, and 5, paragraph (c), clause (1), do not
apply to projects qualifying under subdivision 1, paragraph (b).
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 3.

Minnesota Statutes 2012, section 216B.1692, subdivision 8, is amended to read:

Subd. 8.

Sunset.

This section is effective until December 31, deleted text begin 2015 deleted text end new text begin 2020 new text end , and
applies to plans, projects, and riders approved before that date and modifications made to
them after that date.

Sec. 4.

Minnesota Statutes 2012, section 216B.1695, subdivision 5, is amended to read:

Subd. 5.

Cost recovery.

The utility may begin recovery of costs that have been
incurred by the utility in connection with implementation of the project in the next rate
case following an advance determination of prudence new text begin or in a rider approved under section
216B.1692 new text end . The commission shall review the costs incurred by the utility for the project.
The utility must show that the project costs are reasonable and necessary, and demonstrate
its efforts to ensure the lowest reasonable project costs. Notwithstanding the commission's
prior determination of prudence, it may accept, modify, or reject any of the project costs.
The commission may determine whether to require an allowance for funds used during
construction offset.

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 5.

Minnesota Statutes 2012, section 216B.1695, is amended by adding a
subdivision to read:

new text begin Subd. 5a. new text end

new text begin Rate of return. new text end

new text begin The return on investment in the rider shall be at the
level approved by the commission in the public utility's last general rate case, unless the
commission determines that a different rate of return is in the public interest.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

ARTICLE 10

STATE BUILDINGS GUARANTEED ENERGY SAVINGS PROGRAM

Section 1.

Minnesota Statutes 2012, section 16C.144, subdivision 2, is amended to read:

Subd. 2.

Guaranteed energy-savings agreement.

The commissioner may enter
into a guaranteed energy-savings agreement with a qualified provider if:

(1) the qualified provider is selected through a competitive process in accordance
with the guaranteed energy-savings program guidelines within the Department of
Administration;

(2) the qualified provider agrees to submit an engineering report prior to the
execution of the guaranteed energy-savings agreement. The cost of the engineering report
may be considered as part of the implementation costs if the commissioner enters into a
guaranteed energy-savings agreement with the provider;

(3) the term of the guaranteed energy-savings agreement shall not exceed deleted text begin 15 deleted text end new text begin 25
new text end years from the date of final installation;

(4) the commissioner finds that the amount it would spend on the utility cost-savings
measures recommended in the engineering report will not exceed the amount to be
saved in utility operation and maintenance costs over deleted text begin 15 deleted text end new text begin 25 new text end years from the date of
implementation of utility cost-savings measures;

(5) the qualified provider provides a written guarantee that the annual utility,
operation, and maintenance cost savings during the term of the guaranteed energy-savings
agreement will meet or exceed the annual payments due under a lease purchase agreement.
The qualified provider shall reimburse the state for any shortfall of guaranteed utility,
operation, and maintenance cost savings; and

(6) the qualified provider gives a sufficient bond in accordance with section
574.26 to the commissioner for the faithful implementation and installation of the utility
cost-savings measures.

ARTICLE 11

INTEGRATED RESOURCE PLANNING

Section 1.

Minnesota Statutes 2012, section 216B.2422, subdivision 4, is amended to
read:

Subd. 4.

Preference for renewable energy facility.

The commission shall not
approve a new or refurbished nonrenewable energy facility in an integrated resource plan
or a certificate of need, pursuant to section 216B.243, nor shall the commission allow rate
recovery pursuant to section 216B.16 for such a nonrenewable energy facility, unless the
utility has demonstrated that a renewable energy facility is not in the public interest. new text begin The
public interest determination must include an assessment of whether the resource plan
helps the utility achieve the greenhouse gas reduction goals under section 216H.02, the
renewable energy standard under section 216B.1691, or the solar energy standard under
section 216B.2427.
new text end

ARTICLE 12

RENEWABLE INTEGRATION STUDY

Section 1. new text begin RENEWABLE INTEGRATION STUDY.
new text end

new text begin The Minnesota electric utilities shall jointly contract with an independent contractor
selected by the commissioner of commerce and must complete the study work under
the direction of the commissioner of commerce. Prior to the start of the study, the
commissioner shall appoint a technical review committee consisting of up to 15
individuals with experience and expertise in electric transmission system engineering,
electric power systems operations, and renewable energy generation technology to review
the study's proposed methods and assumptions, ongoing work, and preliminary results.
new text end

new text begin As part of the planning process, the Minnesota electric utilities must incorporate
and build upon the analyses that have previously been done or that are in progress
including but not limited to the 2006 Minnesota Wind Integration Study and ongoing
work to address geographically dispersed development plans, the 2007 Minnesota
Transmission for Renewable Energy Standard Study, the 2008 and 2009 Statewide Studies
of Dispersed Renewable Generation, the 2009 Minnesota RES Update, Corridor, and
Capacity Validation Studies, the 2010 Regional Generation Outlet Study, the 2011 Multi
Value Project Portfolio Study, and recent and ongoing Midwest Independent System
Operator transmission expansion planning work. The utilities shall collaborate with the
Midwest Independent System Operator to optimize and integrate, to the extent possible,
Minnesota's transmission plans with other regional considerations and to encourage the
Midwest Independent System Operator to incorporate Minnesota's planning work into its
transmission expansion future planning.
new text end

new text begin The study must be completed and submitted to the Minnesota Public Utilities
Commission by December 1, 2014. The report shall include a description of the analyses
that have been conducted and the results, including:
new text end

new text begin (1) a conceptual plan for transmission necessary for generation interconnection and
delivery, and operational integration including access to regional geographic diversity and
regional supply and demand side flexibility; and
new text end

new text begin (2) identification and development of potential solutions to any critical issues
encountered to support increasing the renewable energy standard under Minnesota
Statutes, section 216B.1691, to 40 percent by 2030 while maintaining system reliability,
as well as potential impacts and barriers of increasing the renewable energy standard to 45
percent and 50 percent.
new text end

ARTICLE 13

GAS UTILITY INFRASTRUCTURE COSTS

Section 1.

Minnesota Statutes 2012, section 216B.1635, is amended to read:

216B.1635 RECOVERY OF GAS UTILITY INFRASTRUCTURE COSTS.

Subdivision 1.

Definitions.

(a) "Gas utility" means a public utility as defined in
section 216B.02, subdivision 4, that furnishes natural gas service to retail customers.

(b) "Gas utility infrastructure costs" or "GUIC" means new text begin costs incurred in new text end gas utility
projects that:

(1) do not serve to increase revenues by directly connecting the infrastructure
replacement to new customers;

(2) are in service but were not included in the gas utility's rate base in its most recent
general rate case deleted text begin ; and deleted text end new text begin , or are planned to be in service during the period covered by the
report submitted under subdivision 2, but in no case longer than the one year forecast
period in the report; and new text end

(3) deleted text begin replace or modify existing infrastructure if the replacement or modification does
not constitute a betterment, unless the betterment is required by a political subdivision,
as evidenced by specific documentation from the government entity requiring the
replacement or modification of infrastructure deleted text end new text begin do not constitute a betterment, unless the
betterment is based on requirements by a political subdivision or a federal or state agency,
as evidenced by specific documentation, an order, or other similar requirement from the
government entity requiring the replacement or modification of infrastructure new text end .

(c) "Gas utility projects" means deleted text begin relocation and deleted text end new text begin :
new text end

new text begin (1) new text end replacement of natural gas facilities located in the public right-of-way required
by the construction or improvement of a highway, road, street, public building, or other
public work by or on behalf of the United States, the state of Minnesota, or a political
subdivision deleted text begin . deleted text end new text begin ; and
new text end

new text begin (2) replacement or modification of existing natural gas facilities, including surveys,
assessments, reassessment, and other work necessary to determine the need for replacement
or modification of existing infrastructure that is required by a federal or state agency.
new text end

Subd. 2.

new text begin Gas infrastructure new text end filing.

deleted text begin (a) The commission may approve a gas utility's
petition for a rate schedule deleted text end new text begin A public utility submitting a petition new text end to recover deleted text begin GUIC deleted text end new text begin gas
infrastructure costs new text end under this section deleted text begin . A gas utility may deleted text end new text begin must submit to the commission,
the department, and interested parties a gas infrastructure project plan report and a
new text end petition deleted text begin the commission to recover a rate of return, income taxes on the rate of return,
incremental property taxes, plus incremental depreciation expense associated with GUIC
deleted text end new text begin for rate recovery of only incremental costs associated with projects under subdivision
1, paragraph (c), clause (2). The report and petition must be made at least 150 days in
advance of implementation of the rate schedule, provided that the rate schedule will not be
implemented until the petition is approved by the commission pursuant to subdivision
6. The report must be for a forecast period of one year new text end .

deleted text begin (b) The filing is subject to the following:
deleted text end

deleted text begin (1) A gas utility may submit a filing under this section no more than once per year.
deleted text end

deleted text begin (2) A gas utility must file sufficient information to satisfy the commission regarding
the proposed GUIC or be subject to denial by the commission. The information includes,
but is not limited to:
deleted text end

deleted text begin (i) the government entity ordering the gas utility project and the purpose for which
the project is undertaken;
deleted text end

deleted text begin (ii) the location, description, and costs associated with the project;
deleted text end

deleted text begin (iii) a description of the costs, and salvage value, if any, associated with the existing
infrastructure replaced or modified as a result of the project;
deleted text end

deleted text begin (iv) the proposed rate design and an explanation of why the proposed rate design
is in the public interest;
deleted text end

deleted text begin (v) the magnitude and timing of any known future gas utility projects that the utility
may seek to recover under this section;
deleted text end

deleted text begin (vi) the magnitude of GUIC in relation to the gas utility's base revenue as approved
by the commission in the gas utility's most recent general rate case, exclusive of gas
purchase costs and transportation charges;
deleted text end

deleted text begin (vii) the magnitude of GUIC in relation to the gas utility's capital expenditures since
its most recent general rate case;
deleted text end

deleted text begin (viii) the amount of time since the utility last filed a general rate case and the utility's
reasons for seeking recovery outside of a general rate case; and
deleted text end

deleted text begin (ix) documentation supporting the calculation of the GUIC.
deleted text end

new text begin Subd. 3. new text end

new text begin Gas infrastructure project plan report. new text end

new text begin The gas infrastructure project
plan report required to be filed under subdivision 2 shall include all pertinent information
and supporting data on each proposed project including, but not limited to, project
description and scope, estimated project costs, and project in-service date.
new text end

new text begin Subd. 4. new text end

new text begin Cost recovery petition for utility's facilities. new text end

new text begin Notwithstanding any other
provision of this chapter, the commission may approve a rate schedule for the automatic
annual adjustment of charges for gas utility infrastructure costs net of revenues under
this section, including a rate of return, income taxes on the rate of return, incremental
property taxes, incremental depreciation expense, and any incremental operation and
maintenance costs. A gas utility's petition for approval of a rate schedule to recover
gas utility infrastructure costs outside of a general rate case under section 216B.16, is
subject to the following:
new text end

new text begin (1) a gas utility may submit a filing under this section no more than once per year; and
new text end

new text begin (2) a gas utility must file sufficient information to satisfy the commission regarding
the proposed GUIC. The information includes, but is not limited to:
new text end

new text begin (i) the information required to be included in the gas infrastructure project plan
report under subdivision 3;
new text end

new text begin (ii) the government entity ordering or requiring the gas utility project and the
purpose for which the project is undertaken;
new text end

new text begin (iii) a description of the estimated costs and salvage value, if any, associated with the
existing infrastructure replaced or modified as a result of the project;
new text end

new text begin (iv) a comparison of the utility's estimated costs included in the gas infrastructure
project plan and the actual costs incurred, including a description of the utility's efforts to
ensure the costs of the facilities are reasonable and prudently incurred;
new text end

new text begin (v) calculations to establish that the rate adjustment is consistent with the terms
of the rate schedule, including the proposed rate design and an explanation of why the
proposed rate design is in the public interest;
new text end

new text begin (vi) the magnitude and timing of any known future gas utility projects that the
utility may seek to recover under this section;
new text end

new text begin (vii) the magnitude of GUIC in relation to the gas utility's base revenue as approved
by the commission in the gas utility's most recent general rate case, exclusive of gas
purchase costs and transportation charges;
new text end

new text begin (viii) the magnitude of GUIC in relation to the gas utility's capital expenditures
since its most recent general rate case; and
new text end

new text begin (ix) the amount of time since the utility last filed a general rate case and the utility's
reasons for seeking recovery outside of a general rate case.
new text end

new text begin Subd. 5. new text end

new text begin Commission action. new text end

new text begin Upon receiving a gas utility report and petition for
cost recovery under subdivision 2 and assessment and verification under subdivision 4, the
commission may approve the annual GUIC rate adjustments provided that, after notice
and comment, the costs included for recovery through the rate schedule are prudently
incurred and achieve gas facility improvements at the lowest reasonable and prudent
cost to ratepayers.
new text end

new text begin Subd. 5a. new text end

new text begin Rate of return. new text end

new text begin The return on investment for the rate adjustment shall be
at the level approved by the commission in the public utility's last general rate case, unless
the commission determines that a different rate of return is in the public interest.
new text end

Subd. deleted text begin 3 deleted text end new text begin 6 new text end .

Commission authority; rules.

The commission may issue orders and
adopt rules necessary to implement and administer this section.

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 2.

Laws 2005, chapter 97, article 10, section 3, is amended to read:

Sec. 3. SUNSET.

Sections 1 and 2 shall expire on June 30, deleted text begin 2015 deleted text end new text begin 2023 new text end .

Sec. 3. new text begin REPEALER.
new text end

new text begin Minnesota Statutes 2012, section 216B.1637, new text end new text begin is repealed.
new text end

ARTICLE 14

PACE

Section 1.

Minnesota Statutes 2012, section 216C.435, is amended by adding a
subdivision to read:

new text begin Subd. 3a. new text end

new text begin Cost-effective energy improvements. new text end

new text begin "Cost-effective energy
improvements" mean energy improvements that have been identified in an energy audit
or renewable energy system feasibility study as repaying their purchase and installation
costs in 20 years or less, based on the amount of future energy saved and estimated future
energy prices.
new text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 2.

Minnesota Statutes 2012, section 216C.435, subdivision 8, is amended to read:

Subd. 8.

Qualifying real property.

"Qualifying real property" means a
single-family or multifamily residential dwelling, or a commercial or industrial building,
that the implementing entity has determined, after review of an energy audit or renewable
energy system feasibility study, can be benefited by installation of new text begin cost-effective new text end energy
improvements.

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 3.

Minnesota Statutes 2012, section 216C.436, subdivision 2, is amended to read:

Subd. 2.

Program requirements.

A financing program must:

(1) impose requirements and conditions on financing arrangements to ensure timely
repayment;

(2) require an energy audit or renewable energy system feasibility study to be
conducted on the qualifying real property and reviewed by the implementing entity prior
to approval of the financing;

(3) require the inspection of all installations and a performance verification of at
least ten percent of the energy improvements financed by the program;

(4) new text begin not prohibit the financing of all cost-effective energy improvements not otherwise
prohibited by this section;
new text end

new text begin (5) new text end require that all cost-effective energy improvements be made to a qualifying
real property prior to, or in conjunction with, an applicant's repayment of financing for
energy improvements for that property;

deleted text begin (5) deleted text end new text begin (6) new text end have energy improvements financed by the program performed by licensed
contractors as required by chapter 326B or other law or ordinance;

deleted text begin (6) deleted text end new text begin (7) new text end require disclosures to borrowers by the implementing entity of the risks
involved in borrowing, including the risk of foreclosure if a tax delinquency results from
a default;

deleted text begin (7) deleted text end new text begin (8) new text end provide financing only to those who demonstrate an ability to repay;

deleted text begin (8) deleted text end new text begin (9) new text end not provide financing for a qualifying real property in which the owner is not
current on mortgage or real property tax payments;

deleted text begin (9) deleted text end new text begin (10) new text end require a petition to the implementing entity by all owners of the qualifying
real property requesting collections of repayments as a special assessment under section
429.101;

deleted text begin (10) deleted text end new text begin (11) new text end provide that payments and assessments are not accelerated due to a default
and that a tax delinquency exists only for assessments not paid when due; and

deleted text begin (11) deleted text end new text begin (12) new text end require that liability for special assessments related to the financing runs
with the qualifying real property.

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

Sec. 4.

Minnesota Statutes 2012, section 216C.436, subdivision 7, is amended to read:

Subd. 7.

Repayment.

An implementing entity that finances an energy improvement
under this section must:

(1) secure payment with a lien against the deleted text begin benefited deleted text end qualifying real property; and

(2) collect repayments as a special assessment as provided for in section 429.101
or by charter new text begin , provided that special assessments may be made payable in up to 20 equal
annual installments new text end .

If the implementing entity is an authority, the local government that authorized
the authority to act as implementing entity shall impose and collect special assessments
necessary to pay debt service on bonds issued by the implementing entity under subdivision
8, and shall transfer all collections of the assessments upon receipt to the authority.

Sec. 5.

Minnesota Statutes 2012, section 216C.436, subdivision 8, is amended to read:

Subd. 8.

Bond issuance; repayment.

(a) An implementing entity may issue
revenue bonds as provided in chapter 475 for the purposes of this section new text begin , provided the
revenue bond must not be payable more than 20 years from the date of issuance new text end .

(b) The bonds must be payable as to both principal and interest solely from the
revenues from the assessments established in subdivision 7.

(c) No holder of bonds issued under this subdivision may compel any exercise of the
taxing power of the implementing entity that issued the bonds to pay principal or interest
on the bonds, and if the implementing entity is an authority, no holder of the bonds may
compel any exercise of the taxing power of the local government. Bonds issued under
this subdivision are not a debt or obligation of the issuer or any local government that
issued them, nor is the payment of the bonds enforceable out of any money other than the
revenue pledged to the payment of the bonds.

Sec. 6.

Minnesota Statutes 2012, section 429.101, subdivision 2, is amended to read:

Subd. 2.

Procedure for assessment.

Any special assessment levied under
subdivision 1 shall be payable in a single installment, or by up to ten equal annual
installments as the council may provide new text begin , except that a special assessment made under an
energy improvements financing program under subdivision 1, paragraph (c), may be
repayable in up to 20 equal installments new text end . With deleted text begin this exception deleted text end new text begin these exceptions new text end , sections
429.061, 429.071, and 429.081 shall apply to assessments made under this section.

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end

ARTICLE 15

WASTE HEAT RECOVERY

Section 1.

Minnesota Statutes 2012, section 216B.241, subdivision 1, is amended to
read:

Subdivision 1.

Definitions.

For purposes of this section and section 216B.16,
subdivision 6b, the terms defined in this subdivision have the meanings given them.

(a) "Commission" means the Public Utilities Commission.

(b) "Commissioner" means the commissioner of commerce.

(c) "Department" means the Department of Commerce.

(d) "Energy conservation" means demand-side management of energy supplies
resulting in a net reduction in energy use. Load management that reduces overall energy
use is energy conservation.

(e) "Energy conservation improvement" means a project that results in energy
efficiency or energy conservation. Energy conservation improvement may include waste
heat deleted text begin recovery deleted text end new text begin that is recovered and new text end converted into electricity new text begin , new text end but does not include electric
utility infrastructure projects approved by the commission under section 216B.1636.
new text begin Energy conservation improvement also includes waste heat recovered and used as thermal
energy.
new text end

(f) "Energy efficiency" means measures or programs, including energy conservation
measures or programs, that target consumer behavior, equipment, processes, or devices
designed to produce either an absolute decrease in consumption of electric energy or natural
gas or a decrease in consumption of electric energy or natural gas on a per unit of production
basis without a reduction in the quality or level of service provided to the energy consumer.

(g) "Gross annual retail energy sales" means annual electric sales to all retail
customers in a utility's or association's Minnesota service territory or natural gas
throughput to all retail customers, including natural gas transportation customers, on a
utility's distribution system in Minnesota. For purposes of this section, gross annual
retail energy sales exclude:

(1) gas sales to:

(i) a large energy facility;

(ii) a large customer facility whose natural gas utility has been exempted by the
commissioner under subdivision 1a, paragraph (b), with respect to natural gas sales made
to the large customer facility; and

(iii) a commercial gas customer facility whose natural gas utility has been exempted
by the commissioner under subdivision 1a, paragraph (c), with respect to natural gas sales
made to the commercial gas customer facility; and

(2) electric sales to a large customer facility whose electric utility has been exempted
by the commissioner under subdivision 1a, paragraph (b), with respect to electric sales
made to the large customer facility.

(h) "Investments and expenses of a public utility" includes the investments
and expenses incurred by a public utility in connection with an energy conservation
improvement, including but not limited to:

(1) the differential in interest cost between the market rate and the rate charged on a
no-interest or below-market interest loan made by a public utility to a customer for the
purchase or installation of an energy conservation improvement;

(2) the difference between the utility's cost of purchase or installation of energy
conservation improvements and any price charged by a public utility to a customer for
such improvements.

(i) "Large customer facility" means all buildings, structures, equipment, and
installations at a single site that collectively (1) impose a peak electrical demand on an
electric utility's system of not less than 20,000 kilowatts, measured in the same way as the
utility that serves the customer facility measures electrical demand for billing purposes or
(2) consume not less than 500 million cubic feet of natural gas annually. In calculating
peak electrical demand, a large customer facility may include demand offset by on-site
cogeneration facilities and, if engaged in mineral extraction, may aggregate peak energy
demand from the large customer facility's mining and processing operations.

(j) "Large energy facility" has the meaning given it in section 216B.2421,
subdivision 2, clause (1).

(k) "Load management" means an activity, service, or technology to change the
timing or the efficiency of a customer's use of energy that allows a utility or a customer to
respond to wholesale market fluctuations or to reduce peak demand for energy or capacity.

(l) "Low-income programs" means energy conservation improvement programs that
directly serve the needs of low-income persons, including low-income renters.

(m) "Qualifying utility" means a utility that supplies the energy to a customer that
enables the customer to qualify as a large customer facility.

new text begin (n) "Waste heat recovered and used as thermal energy" means capturing heat energy
that would otherwise be exhausted or dissipated to the environment from machinery,
buildings, or industrial processes and productively using such recovered thermal energy
where it was captured or distributing it as thermal energy to other locations where it is
used to reduce demand side consumption of natural gas, electric energy, or both.
new text end

deleted text begin (n) deleted text end new text begin (o) new text end "Waste heat recovery converted into electricity" means an energy recovery
process that converts otherwise lost energy from the heat of exhaust stacks or pipes used
for engines or manufacturing or industrial processes, or the reduction of high pressure
in water or gas pipelines.

Sec. 2.

Minnesota Statutes 2012, section 216B.241, is amended by adding a
subdivision to read:

new text begin Subd. 10. new text end

new text begin Waste heat recovery; thermal energy distribution. new text end

new text begin Demand side
natural gas or electric energy displaced by use of waste heat recovered and used as thermal
energy, including the recovered thermal energy from a cogeneration or combined heat and
power facility, is eligible to be counted towards a utility's natural gas or electric energy
savings goals, subject to department approval.
new text end