SF 1057

as introduced - 85th Legislature (2007 - 2008) Posted on 12/15/2009 12:00am

A bill for an act
relating to occupations; establishing the Council of High Pressure Piping
Systems; requiring the council to establish fees; amending Minnesota Statutes
2006, section 326.47, subdivision 6; proposing coding for new law in Minnesota
Statutes, chapter 326.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF MINNESOTA:

Section 1.

Minnesota Statutes 2006, section 326.47, subdivision 6, is amended to read:

Subd. 6.

Filing and inspection fees.

The Department of Labor and Industry
must charge a filing fee set by the deleted text begin commissioner deleted text end new text begin council new text end under section 16A.1285 for all
applications for permits to construct or install high pressure piping systems. The fee for
inspection of high pressure piping system construction or installation shall be set by the
deleted text begin commissioner deleted text end new text begin council new text end under section 16A.1285. This subdivision does not apply where a
permit is issued by a municipality complying with subdivision 2.

Sec. 2.

new text begin [326.471] COUNCIL OF HIGH PRESSURE PIPING SYSTEMS.
new text end

new text begin Subdivision 1. new text end

new text begin Composition. new text end

new text begin (a) The Council of High Pressure Piping Systems
shall consist of 12 members who must be residents of the state, appointed by the governor,
and confirmed by the senate. The commissioner of the Department of Labor and Industry
or the commissioner's designee shall be a nonvoting member. The first appointed board
members shall serve an initial term of four years, except where designated otherwise. The
governor shall then reappoint the current members or appoint replacement members, all or
in part, to subsequent three-year terms. Midterm vacancies shall be filled for the remaining
portion of the term. Vacancies occurring with less than six months time remaining in the
term shall be filled for the existing term and the following three-year term. Of the 11
appointed members, the composition shall be as follows:
new text end

new text begin (1) one member shall be a high pressure piping inspector;
new text end

new text begin (2) one member shall be a licensed mechanical engineer;
new text end

new text begin (3) one member shall be a representative of the piping industry;
new text end

new text begin (4) four members shall be high pressure piping contractors or their representatives,
engaged in the scope of high pressure piping, two from the metro area and two from
greater Minnesota;
new text end

new text begin (5) two members shall be high pressure piping journeypersons engaged in the scope
of high pressure piping systems installation, one from the metro area and one from greater
Minnesota; and
new text end

new text begin (6) two members shall be representatives from utility companies in Minnesota
who shall serve an initial term of two years.
new text end

new text begin (b) Except for the licensed mechanical engineer and the members from utilities
companies, all persons appointed to the council must possess a current license or
competency credential required for contractors and persons engaged in the design,
installation, alteration, and inspection of high pressure systems.
new text end

new text begin Subd. 2. new text end

new text begin Powers. new text end

new text begin (a) The council shall have the power to:
new text end

new text begin (1) elect its own officers;
new text end

new text begin (2) specify the high pressure piping code that must be followed in Minnesota;
new text end

new text begin (3) maintain an appeals committee to make determinations regarding any complaints,
code amendments, code compliance, and code clarifications filed with the council;
new text end

new text begin (4) adopt rules necessary for the regulation and licensing of contractors,
journeypersons, trainees, and other persons engaged in the design, installation, alteration,
and inspection of high pressure piping systems;
new text end

new text begin (5) adopt rules necessary for continuing education for individuals regulated and
licensed under this section; and
new text end

new text begin (6) pay expenses deemed necessary in the performance of council duties, including
rent, utilities, and supplies in the manner and amount specified in section 43A.18,
subdivision 2.
new text end

new text begin (b) Complaints filed under this section may originate with high pressure piping
inspectors, contractors, or their employees, or other persons engaged in the design,
installation, and alteration of a high pressure piping system. The council shall make
their findings known to all parties and the commissioner of the Department of Labor and
Industry within the time period specified by the council.
new text end

new text begin Subd. 3. new text end

new text begin Fee and finances. new text end

new text begin The council shall submit an annual budget to the
commissioner of the Department of Labor and Industry. The commissioner shall collect
fees necessary for the operation and continuance of the council. The commissioner
is responsible for the enforcement of the codes and licensing requirements determined
by the council. The council shall set the fees for licenses and certification under this
section and for all high pressure piping system permits and submit the fee structure to
the commissioner of labor and industry. Funds collected under section 326.50 shall be
transferred to the council quarterly to meet ongoing budgetary needs of the council.
new text end