Skip to main content Skip to office menu Skip to footer
Capital IconMinnesota Legislature

HF 3875

as introduced - 92nd Legislature (2021 - 2022) Posted on 03/03/2022 02:03pm

KEY: stricken = removed, old language.
underscored = added, new language.

Bill Text Versions

Engrossments
Introduction Posted on 03/03/2022 ,  28 occurences of "cannabis"

Current Version - as introduced

Line numbers 1.1 1.2 1.3 1.4 1.5 1.6
1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23 2.24 2.25 2.26 2.27 2.28 2.29 2.30 2.31 2.32 2.33 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 3.24 3.25 3.26 3.27 3.28 3.29 3.30 3.31
4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13

A bill for an act
relating to health; allowing third-party testing laboratory staff to transport medical
cannabis Next to a testing laboratory; amending Minnesota Statutes 2020, section 152.29,
subdivision 3a; Minnesota Statutes 2021 Supplement, section 152.29, subdivision
1.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF MINNESOTA:

Section 1.

Minnesota Statutes 2021 Supplement, section 152.29, subdivision 1, is amended
to read:


Subdivision 1.

Manufacturer; requirements.

(a) A manufacturer may operate eight
distribution facilities, which may include the manufacturer's single location for cultivation,
harvesting, manufacturing, packaging, and processing but is not required to include that
location. The commissioner shall designate the geographical service areas to be served by
each manufacturer based on geographical need throughout the state to improve patient
access. A manufacturer shall not have more than two distribution facilities in each
geographical service area assigned to the manufacturer by the commissioner. A manufacturer
shall operate only one location where all cultivation, harvesting, manufacturing, packaging,
and processing of medical Previous cannabis Next shall be conducted. This location may be one of the
manufacturer's distribution facility sites. The additional distribution facilities may dispense
medical Previous cannabis Next and medical Previous cannabis Next products but may not contain any medical Previous cannabis Next
in a form other than those forms allowed under section 152.22, subdivision 6, and the
manufacturer shall not conduct any cultivation, harvesting, manufacturing, packaging, or
processing at the other distribution facility sites. Any distribution facility operated by the
manufacturer is subject to all of the requirements applying to the manufacturer under sections
152.22 to 152.37, including, but not limited to, security and distribution requirements.

(b) A manufacturer may acquire hemp grown in this state from a hemp grower, and may
acquire hemp products produced by a hemp processor. A manufacturer may manufacture
or process hemp and hemp products into an allowable form of medical Previous cannabis Next under
section 152.22, subdivision 6. Hemp and hemp products acquired by a manufacturer under
this paragraph are subject to the same quality control program, security and testing
requirements, and other requirements that apply to medical Previous cannabis Next under sections 152.22
to 152.37 and Minnesota Rules, chapter 4770.

(c) A medical Previous cannabis Next manufacturer shall contract with a laboratory approved by the
commissioner, subject to any additional requirements set by the commissioner, for purposes
of testing medical Previous cannabis Next manufactured or hemp or hemp products acquired by the medical
Previous cannabis Next manufacturer as to content, contamination, and consistency to verify the medical
Previous cannabis Next meets the requirements of section 152.22, subdivision 6. new text begin The laboratory must
collect, or contract with a third-party that is not a manufacturer to collect, from the
manufacturer's production facility the medical Previous cannabis Next samples it will test.
new text end The cost of
laboratory new text begin sample collections and new text end testing shall be paid by the manufacturer.

(d) The operating documents of a manufacturer must include:

(1) procedures for the oversight of the manufacturer and procedures to ensure accurate
record keeping;

(2) procedures for the implementation of appropriate security measures to deter and
prevent the theft of medical Previous cannabis Next and unauthorized entrance into areas containing medical
Previous cannabis Next ; and

(3) procedures for the delivery and transportation of hemp between hemp growers and
manufacturers and for the delivery and transportation of hemp products between hemp
processors and manufacturers.

(e) A manufacturer shall implement security requirements, including requirements for
the delivery and transportation of hemp and hemp products, protection of each location by
a fully operational security alarm system, facility access controls, perimeter intrusion
detection systems, and a personnel identification system.

(f) A manufacturer shall not share office space with, refer patients to a health care
practitioner, or have any financial relationship with a health care practitioner.

(g) A manufacturer shall not permit any person to consume medical Previous cannabis Next on the
property of the manufacturer.

(h) A manufacturer is subject to reasonable inspection by the commissioner.

(i) For purposes of sections 152.22 to 152.37, a medical Previous cannabis Next manufacturer is not
subject to the Board of Pharmacy licensure or regulatory requirements under chapter 151.

(j) A medical Previous cannabis Next manufacturer may not employ any person who is under 21 years
of age or who has been convicted of a disqualifying felony offense. An employee of a
medical Previous cannabis Next manufacturer must submit a completed criminal history records check
consent form, a full set of classifiable fingerprints, and the required fees for submission to
the Bureau of Criminal Apprehension before an employee may begin working with the
manufacturer. The bureau must conduct a Minnesota criminal history records check and
the superintendent is authorized to exchange the fingerprints with the Federal Bureau of
Investigation to obtain the applicant's national criminal history record information. The
bureau shall return the results of the Minnesota and federal criminal history records checks
to the commissioner.

(k) A manufacturer may not operate in any location, whether for distribution or
cultivation, harvesting, manufacturing, packaging, or processing, within 1,000 feet of a
public or private school existing before the date of the manufacturer's registration with the
commissioner.

(l) A manufacturer shall comply with reasonable restrictions set by the commissioner
relating to signage, marketing, display, and advertising of medical Previous cannabis Next .

(m) Before a manufacturer acquires hemp from a hemp grower or hemp products from
a hemp processor, the manufacturer must verify that the hemp grower or hemp processor
has a valid license issued by the commissioner of agriculture under chapter 18K.

(n) Until a state-centralized, seed-to-sale system is implemented that can track a specific
medical Previous cannabis Next plant from cultivation through testing and point of sale, the commissioner
shall conduct at least one unannounced inspection per year of each manufacturer that includes
inspection of:

(1) business operations;

(2) physical locations of the manufacturer's manufacturing facility and distribution
facilities;

(3) financial information and inventory documentation, including laboratory testing
results; and

(4) physical and electronic security alarm systems.

Sec. 2.

Minnesota Statutes 2020, section 152.29, subdivision 3a, is amended to read:


Subd. 3a.

Transportation of medical Previous cannabis Next ; staffing.

(a) A medical Previous cannabis Next
manufacturer may staff a transport motor vehicle with only one employee if the medical
Previous cannabis Next manufacturer is transporting medical Previous cannabis Next to deleted text begin either a certified laboratory for
the purpose of testing or
deleted text end a facility for the purpose of disposal. If the medical Previous cannabis Next
manufacturer is transporting medical Previous cannabis Next for any other purpose or destination, the
transport motor vehicle must be staffed with a minimum of two employees as required by
rules adopted by the commissioner.new text begin A third-party testing laboratory may staff a transport
motor vehicle with one or more employees when transporting medical Previous cannabis Next from a
manufacturer's production facility to the testing laboratory for the purpose of testing samples.
new text end

(b) Notwithstanding paragraph (a), a medical Previous cannabis manufacturer that is only
transporting hemp for any purpose may staff the transport motor vehicle with only one
employee.