Skip to main content Skip to office menu Skip to footer
Minnesota Legislature

Office of the Revisor of Statutes

7035.0605 AVAILABILITY OF REFERENCES.

A.

The documents needed for analyzing and classifying soils as required in parts 7035.0300 to 7035.2915 may be obtained by contacting the Engineering Library of the University of Minnesota, through the Minitex interlibrary loan system, and requesting the standards from the American Society for Testing and Material, in the Annual Book of ASTM Standards, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.

B.

The publication for classification of wetlands, titled "Classification of Wetlands and Deep Water Habitats of the United States," may be obtained through the Minitex interlibrary loan system or by requesting the publication from the Superintendent of Documents, United States Government Printing Office, Washington, D.C. 20402.

C.

Test Methods for Evaluating Solid Waste, EPA SW-846, Third Edition, November 1986, issued by the United States Environmental Protection Agency (EPA), is incorporated by reference. Sections of this document which are directly relevant to parts 7035.2885 to 7035.2915 are available through the Minitex interlibrary loan system. The entire document is available from EPA Environmental Monitoring and Support Laboratory, Cincinnati, Ohio, 45268. It is not subject to frequent change.

D.

The document Standard Number 54: Flexible Membrane Liners, May 1990, issued by the National Sanitation Foundation, is incorporated by reference. It is available through the Minitex interlibrary loan system. It is not subject to frequent change.

E.

EPA Document 600/4-79-020 Methods for Chemical Analyses of Water and Wastes, appearing in Code of Federal Regulations, title 40, part 136, 1990, is incorporated by reference. The document is available through the Minitex interlibrary loan system and EPA Environmental Monitoring and Support Laboratory, Cincinnati, Ohio, 45268. It is not subject to frequent change.

F.

EPA Method 1312: the Synthetic Precipitation Leach Test for Soils (draft document, no date available) is incorporated by reference. The method is available through the Minitex interlibrary loan system. A copy of the method may also be obtained from the commissioner. The draft method is not subject to frequent change.

G.

EPA Method 8290, November 1990, is incorporated by reference. The method is available through the Minitex interlibrary loan system and EPA Office of Solid Waste, Characterization and Assessment Division, Technical Assessment Branch, 0S-331, Washington, D.C., 20460. The method is not subject to frequent change.

H.

American Society for Testing and Materials (ASTM) Methods D3173 and D3174 are incorporated by reference. These methods are published in the Annual Book of ASTM Standards: Part 26, Gaseous Fuels; Coal and Coke; Atmospheric Analysis, 1981 Edition. This publication is available through the Minitex interlibrary loan system. The methods are not subject to frequent change.

I.

American Society for Testing and Materials (ASTM) Standards D6400 "Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities" (2012 and as subsequently amended) and D6868 "Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities" (2011 and as subsequently amended), ASTM International, are incorporated by reference. The standards are not subject to frequent change and are available through the Minitex interlibrary loan system.

J.

Minnesota Department of Transportation, Road Design Manual (2012 and as subsequently amended) is incorporated by reference, is subject to frequent change, and is available at http://www.roaddesign.dot.state.mn.us/roaddesign.aspx.

Statutory Authority:

MS s 115.03; 115A.97; 116.07

History:

13 SR 1150; 16 SR 2321; 39 SR 857

Published Electronically:

January 7, 2015