1.1                          A bill for an act 
  1.2             relating to professions; modifying electrician 
  1.3             licensing; requiring rulemaking; amending Minnesota 
  1.4             Statutes 2000, sections 326.01, subdivisions 5, 6g, by 
  1.5             adding subdivisions; 326.241, subdivision 1; 326.242, 
  1.6             subdivisions 1, 2, 3, 5, 6, 6a, 6b, 6c, 7, 8, 10, 12, 
  1.7             by adding a subdivision; 326.2421, subdivisions 2, 9; 
  1.8             326.243; 326.244, subdivisions 1a, 2, 5, 6; repealing 
  1.9             Minnesota Statutes 2000, sections 326.01, subdivision 
  1.10            6d; 326.2421, subdivisions 3, 4, 6, 8. 
  1.11  BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF MINNESOTA: 
  1.12     Section 1.  Minnesota Statutes 2000, section 326.01, 
  1.13  subdivision 5, is amended to read: 
  1.14     Subd. 5.  [ELECTRICAL CONTRACTOR.] The term "electrical 
  1.15  contractor" means a person, partnership, or corporation 
  1.16  operating a business that undertakes or offers to undertake to 
  1.17  plan for, lay out, or install or to make additions, alterations, 
  1.18  or repairs in the installation of electrical wiring, apparatus, 
  1.19  or equipment for light, heat, power, and other purposes with or 
  1.20  without compensation who is licensed as such by the board of 
  1.21  electricity.  An electrical A contractor's license does not of 
  1.22  itself qualify its holder to perform or supervise the electrical 
  1.23  work authorized by holding any class of electrician's or other 
  1.24  personal electrical license. 
  1.25     Sec. 2.  Minnesota Statutes 2000, section 326.01, 
  1.26  subdivision 6g, is amended to read: 
  1.27     Subd. 6g.  [PERSONAL SUPERVISION.] The term "personal 
  1.28  supervision" means that a person licensed electrician to perform 
  2.1   electrical work oversees and directs the electrical work 
  2.2   performed by an unlicensed person such that: 
  2.3      (1) the licensed electrician person actually reviews the 
  2.4   electrical work performed by the unlicensed person; 
  2.5      (2) the licensed electrician person is immediately 
  2.6   available to the unlicensed person at all times for assistance 
  2.7   and direction; and 
  2.8      (3) the licensed electrician person is able to and does 
  2.9   determine that all electrical work performed by the unlicensed 
  2.10  person is performed in compliance with section 326.243. 
  2.11     The licensed electrician person is responsible for the 
  2.12  compliance with section 326.243 of all electrical work performed 
  2.13  by the unlicensed person.  
  2.14     Sec. 3.  Minnesota Statutes 2000, section 326.01, is 
  2.15  amended by adding a subdivision to read: 
  2.16     Subd. 6i.  [DEMARCATION.] "Demarcation" means listed 
  2.17  equipment as identified in Minnesota Rules, part 3800.3619, such 
  2.18  as a transformer, uninterruptible power supply (UPS), battery, 
  2.19  control panel, or other device that isolates technology circuits 
  2.20  or systems from nontechnology circuits or systems, including 
  2.21  plug or cord and plug connection. 
  2.22     Sec. 4.  Minnesota Statutes 2000, section 326.01, is 
  2.23  amended by adding a subdivision to read: 
  2.24     Subd. 6j.  [RESIDENTIAL DWELLING.] A "residential dwelling" 
  2.25  is an individual dwelling of a one-family, two-family, or 
  2.26  multifamily dwelling as defined in the National Electrical Code 
  2.27  pursuant to section 326.243, including its garage or accessory 
  2.28  building. 
  2.29     Sec. 5.  Minnesota Statutes 2000, section 326.01, is 
  2.30  amended by adding a subdivision to read: 
  2.31     Subd. 6k.  [POWER LIMITED TECHNICIAN.] The term "power 
  2.32  limited technician" means a person having the necessary 
  2.33  qualifications, training, experience, and technical knowledge to 
  2.34  install, alter, repair, plan, lay out, and supervise the 
  2.35  installing, altering, and repairing of electrical wiring, 
  2.36  apparatus, and equipment for technology circuits or systems who 
  3.1   is licensed as such by the board of electricity. 
  3.2      Sec. 6.  Minnesota Statutes 2000, section 326.01, is 
  3.3   amended by adding a subdivision to read: 
  3.4      Subd. 6l.  [TECHNOLOGY CIRCUITS OR SYSTEMS.] "Technology 
  3.5   circuits or systems" means class 2 or class 3 circuits or 
  3.6   systems for, but not limited to, remote control, signaling, 
  3.7   control, alarm, and audio signal, including associated 
  3.8   components as covered by National Electrical Code, articles 640, 
  3.9   645, 725, 760, 770, and 780 and which are isolated from circuits 
  3.10  or systems other than class 2 or class 3 by a demarcation; 
  3.11  antenna and communication circuits or systems as covered by 
  3.12  chapter 8 of the National Electrical Code; and circuitry and 
  3.13  equipment for indoor lighting and outdoor landscape lighting 
  3.14  systems that are supplied by the secondary circuit of an 
  3.15  isolating power supply operating at 30 volts or less as covered 
  3.16  by National Electrical Code, article 411.  The planning, laying 
  3.17  out, installing, altering, and repairing of technology circuits 
  3.18  or systems must be performed in accordance with the applicable 
  3.19  requirements of the National Electrical Code pursuant to section 
  3.20  326.243. 
  3.21     Sec. 7.  Minnesota Statutes 2000, section 326.241, 
  3.22  subdivision 1, is amended to read: 
  3.23     Subdivision 1.  [COMPOSITION.] The board of electricity 
  3.24  shall consist of 11 members, residents of the state, appointed 
  3.25  by the governor of whom at least two shall be representatives of 
  3.26  the electrical suppliers in the rural areas of the state, two 
  3.27  shall be master electricians, who shall be contractors, two 
  3.28  journeyman electricians, one registered consulting electrical 
  3.29  engineer, two licensed alarm and communication power limited 
  3.30  technicians, who shall be technology system 
  3.31  contractors primarily engaged in the business of installing 
  3.32  alarm and communication technology circuits or systems, and two 
  3.33  public members as defined by section 214.02.  Membership terms, 
  3.34  compensation of members, removal of members, the filling of 
  3.35  membership vacancies, and fiscal year and reporting requirements 
  3.36  shall be as provided in sections 214.07 to 214.09.  The 
  4.1   provision of staff, administrative services and office space; 
  4.2   the review and processing of complaints; the setting of board 
  4.3   fees; and other provisions relating to board operations shall be 
  4.4   as provided in chapter 214. 
  4.5      Sec. 8.  Minnesota Statutes 2000, section 326.242, 
  4.6   subdivision 1, is amended to read: 
  4.7      Subdivision 1.  [MASTER ELECTRICIAN.] Except as otherwise 
  4.8   provided by law, no person shall install, alter, repair, plan, 
  4.9   lay out, or supervise the installing, altering, or repairing of 
  4.10  electrical wiring, apparatus, or equipment for light, heat, 
  4.11  power, or other purposes unless the person is:  (a) licensed by 
  4.12  the board as a master electrician and (b)(i) the electrical work 
  4.13  is for a licensed electrical contractor and the person is an 
  4.14  employee, partner, or officer of, or is the licensed electrical 
  4.15  contractor, or (ii) the electrical work is performed for the 
  4.16  person's employer on electric wiring, apparatus, equipment, or 
  4.17  facilities owned or leased by the employer which is located 
  4.18  within the limits of property which is owned or leased and 
  4.19  operated and maintained by the employer.  
  4.20     (1) An applicant for a Class A master electrician's license 
  4.21  shall (a) be a graduate of a four-year electrical course in an 
  4.22  accredited college or university; or (b) shall have had at least 
  4.23  one year's experience, acceptable to the board, as a licensed 
  4.24  journeyman; or (c) shall have had at least five years' 
  4.25  experience, acceptable to the board, in planning for, laying 
  4.26  out, supervising and installing wiring, apparatus, or equipment 
  4.27  for electrical light, heat and power.  
  4.28     (2) As of August 1, 1985, no new Class B master 
  4.29  electrician's licenses shall be issued.  An individual who has a 
  4.30  Class B master electrician's license as of August 1, 1985 may 
  4.31  retain the license and exercise the privileges it grants, which 
  4.32  include electrical work limited to single phase systems, not 
  4.33  over 200 amperes in capacity, on farmsteads or single-family 
  4.34  dwellings located in towns or municipalities with fewer than 
  4.35  2,500 inhabitants. 
  4.36     Sec. 9.  Minnesota Statutes 2000, section 326.242, 
  5.1   subdivision 2, is amended to read: 
  5.2      Subd. 2.  [JOURNEYMAN ELECTRICIAN.] (a) Except as otherwise 
  5.3   provided by law, no person shall install, alter, repair, or 
  5.4   supervise the installing, altering, or repairing of electrical 
  5.5   wiring, apparatus, or equipment for light, heat, power, or other 
  5.6   purposes unless: 
  5.7      (1) the person is licensed by the board as a journeyman 
  5.8   electrician; and 
  5.9      (2) the electrical work is: 
  5.10     (i) for an electrical a contractor and the person is an 
  5.11  employee, partner, or officer of the licensed electrical 
  5.12  contractor; or 
  5.13     (ii) performed under the supervision of a master 
  5.14  electrician also employed by the person's employer on electrical 
  5.15  wiring, apparatus, equipment, or facilities owned or leased by 
  5.16  the employer that is located within the limits of property owned 
  5.17  or leased, operated, and maintained by the employer. 
  5.18     (b) An applicant for a Class A journeyman electrician's 
  5.19  license shall have had at least four years of experience, 
  5.20  acceptable to the board, in wiring for, installing, and 
  5.21  repairing electrical wiring, apparatus, or equipment, provided 
  5.22  however, that the board may by rule provide for the allowance of 
  5.23  one year of experience credit for successful completion of a 
  5.24  two-year post high school electrical course approved by the 
  5.25  board. 
  5.26     (c) As of August 1, 1985, no new Class B journeyman 
  5.27  electrician's licenses shall be issued.  An individual who holds 
  5.28  a Class B journeyman electrician's license as of August 1, 1985 
  5.29  may retain the license and exercise the privileges it grants, 
  5.30  which include electrical work limited to single phase systems, 
  5.31  not over 200 amperes in capacity, on farmsteads or on 
  5.32  single-family dwellings located in towns or municipalities with 
  5.33  fewer than 2,500 inhabitants. 
  5.34     Sec. 10.  Minnesota Statutes 2000, section 326.242, 
  5.35  subdivision 3, is amended to read: 
  5.36     Subd. 3.  [CLASS A INSTALLER.] Notwithstanding the 
  6.1   provisions of subdivisions 1, 2, and 6, any person holding a 
  6.2   class A installer license may lay out and install and supervise 
  6.3   the laying out and installing of electrical wiring, apparatus, 
  6.4   or equipment for major electrical home appliances on the load 
  6.5   side of the main service on farmsteads and in any town or 
  6.6   municipality with fewer than 1,500 inhabitants, which is not 
  6.7   contiguous to a city of the first class and does not contain an 
  6.8   established business of an electrical a contractor. 
  6.9      Sec. 11.  Minnesota Statutes 2000, section 326.242, is 
  6.10  amended by adding a subdivision to read: 
  6.11     Subd. 3d.  [POWER LIMITED TECHNICIAN.] (a) Except as 
  6.12  otherwise provided by law, no person shall install, alter, 
  6.13  repair, plan, lay out, or supervise the installing, altering, or 
  6.14  repairing of electrical wiring, apparatus, or equipment for 
  6.15  technology circuits or systems unless: 
  6.16     (l) the person is licensed by the board as a power limited 
  6.17  technician; and 
  6.18     (2) the electrical work is: 
  6.19     (i) for a licensed contractor and the person is an 
  6.20  employee, partner, or officer of, or is the licensed contractor; 
  6.21  or 
  6.22     (ii) performed under the supervision of a master 
  6.23  electrician or power limited technician also employed by the 
  6.24  person's employer on technology circuits, systems, apparatus, 
  6.25  equipment, or facilities owned or leased by the employer that is 
  6.26  located within the limits of property owned or leased, operated, 
  6.27  and maintained by the employer. 
  6.28     (b) An applicant for a power limited technician's license 
  6.29  shall (1) be a graduate of a four-year electrical course in an 
  6.30  accredited college or university; or (2) have had at least 18 
  6.31  months experience, acceptable to the board, in planning for, 
  6.32  laying out, supervising, and installing wiring, apparatus, or 
  6.33  equipment for power limited systems, provided however, that the 
  6.34  board may by rule provide for the allowance of up to six months 
  6.35  (1,000 hours) of experience credit for successful completion of 
  6.36  a two-year post high school electrical course or other technical 
  7.1   training approved by the board. 
  7.2      (c) The board may initially set experience requirements 
  7.3   without rulemaking, but must adopt rules before July 1, 2002. 
  7.4      (d) Licensees must attain eight hours of continuing 
  7.5   education acceptable to the board every renewal period. 
  7.6      (e) A person who has achieved a minimal score of 70 percent 
  7.7   on an alarm and communication examination administered by the 
  7.8   board before April 30, 2002, may obtain a power limited 
  7.9   technician license without further examination by submitting an 
  7.10  application and a license fee of $30. 
  7.11     (f) A company holding an alarm and communication license as 
  7.12  of June 30, 2001, may designate one person who may obtain a 
  7.13  power limited technician license without passing an examination 
  7.14  administered by the board by submitting an application and 
  7.15  license fee of $30. 
  7.16     Sec. 12.  Minnesota Statutes 2000, section 326.242, 
  7.17  subdivision 5, is amended to read: 
  7.18     Subd. 5.  [UNLICENSED PERSONS.] (a) An unlicensed person 
  7.19  shall not perform electrical work unless the work is performed 
  7.20  under the personal supervision of an electrician a person 
  7.21  actually licensed to perform such work and the licensed 
  7.22  electrician and unlicensed person persons are employed by the 
  7.23  same employer.  Licensed electricians persons shall not permit 
  7.24  unlicensed persons to perform electrical work except under the 
  7.25  personal supervision of an electrician a person actually 
  7.26  licensed to perform such work.  Unlicensed persons shall not 
  7.27  supervise the performance of electrical work or make assignments 
  7.28  of electrical work to unlicensed persons.  Licensed electricians 
  7.29  Except for technology circuit or system work, licensed persons 
  7.30  shall supervise no more than two unlicensed persons.  For 
  7.31  technology circuit or system work, licensed persons shall 
  7.32  supervise no more than five unlicensed persons. 
  7.33     (b) Notwithstanding any other provision of this section, no 
  7.34  person other than a master electrician or power limited 
  7.35  technician shall plan or lay out electrical wiring, apparatus, 
  7.36  or equipment for light, heat, power, or other purposes, except 
  8.1   circuits or systems exempted from personal licensing by 
  8.2   subdivision 12, paragraph (b). 
  8.3      (c) Electrical Contractors employing unlicensed persons 
  8.4   performing electrical work shall maintain records establishing 
  8.5   compliance with this subdivision, which shall designate all 
  8.6   unlicensed persons performing electrical work, except for 
  8.7   persons working on circuits or systems exempted from personal 
  8.8   licensing by subdivision 12, paragraph (b), and shall permit the 
  8.9   board to examine and copy all such records as provided for in 
  8.10  section 326.244, subdivision 6. 
  8.11     Sec. 13.  Minnesota Statutes 2000, section 326.242, 
  8.12  subdivision 6, is amended to read: 
  8.13     Subd. 6.  [ELECTRICAL CONTRACTOR'S LICENSE REQUIRED.] 
  8.14  Except as otherwise provided by law, no person other than an 
  8.15  employee, partner, or officer of a licensed electrical 
  8.16  contractor, as defined by section 326.01, subdivision 5, shall 
  8.17  undertake or offer to undertake to plan for, lay out, supervise 
  8.18  or install or to make additions, alterations, or repairs in the 
  8.19  installation of electrical wiring, apparatus, and equipment for 
  8.20  light, heat, power, and other purposes with or without 
  8.21  compensation unless the person obtains an electrical a 
  8.22  contractor's license.  An electrical A contractor's license does 
  8.23  not of itself qualify its holder to perform or supervise the 
  8.24  electrical work authorized by holding any class of electrician's 
  8.25  personal electrical license.  
  8.26     Sec. 14.  Minnesota Statutes 2000, section 326.242, 
  8.27  subdivision 6a, is amended to read: 
  8.28     Subd. 6a.  [BOND REQUIRED.] Each electrical contractor 
  8.29  shall give and maintain bond to the state in the penal sum of 
  8.30  $5,000 conditioned upon the faithful and lawful performance of 
  8.31  all work entered upon by the contractor within the state of 
  8.32  Minnesota and such bond shall be for the benefit of persons 
  8.33  injured or suffering financial loss by reason of failure of such 
  8.34  performance.  The bond shall be filed with the board and shall 
  8.35  be in lieu of all other license bonds to any political 
  8.36  subdivision.  Such bond shall be written by a corporate surety 
  9.1   licensed to do business in the state of Minnesota.  
  9.2      Sec. 15.  Minnesota Statutes 2000, section 326.242, 
  9.3   subdivision 6b, is amended to read: 
  9.4      Subd. 6b.  [INSURANCE REQUIRED.] Each electrical contractor 
  9.5   shall have and maintain in effect general liability insurance, 
  9.6   which includes premises and operations insurance and products 
  9.7   and completed operations insurance, with limits of at least 
  9.8   $100,000 per occurrence, $300,000 aggregate limit for bodily 
  9.9   injury, and property damage insurance with limits of at least 
  9.10  $25,000 or a policy with a single limit for bodily injury and 
  9.11  property damage of $300,000 per occurrence and $300,000 
  9.12  aggregate limits.  Such insurance shall be written by an insurer 
  9.13  licensed to do business in the state of Minnesota and each 
  9.14  electrical contractor shall maintain on file with the board a 
  9.15  certificate evidencing such insurance which provides that such 
  9.16  insurance shall not be canceled without the insurer first giving 
  9.17  15 days written notice to the board of such cancellation.  
  9.18     Sec. 16.  Minnesota Statutes 2000, section 326.242, 
  9.19  subdivision 6c, is amended to read: 
  9.20     Subd. 6c.  [EMPLOYMENT OF MASTER ELECTRICIAN OR POWER 
  9.21  LIMITED TECHNICIAN.] (a) No electrical contractor shall engage 
  9.22  in business of electrical contracting unless the electrical 
  9.23  contractor employs a licensed Class A master or Class B master 
  9.24  electrician, or power limited technician, who shall be 
  9.25  responsible for the performance of all electrical work in 
  9.26  accordance with the requirements of sections 326.241 to 326.248 
  9.27  or any rule or order adopted or issued under these sections.  
  9.28  The classes of work for which the licensed electrical contractor 
  9.29  is authorized shall be limited to those for which such Class A 
  9.30  master electrician, or Class B master electrician, or power 
  9.31  limited technician employed by the electrical contractor is 
  9.32  licensed.  
  9.33     (b) When an electrical a contractor's license is held by an 
  9.34  individual, partnership, limited liability company, or 
  9.35  corporation and the individual, one of the partners, one of the 
  9.36  members, or an officer of the corporation, respectively, is not 
 10.1   the responsible master electrician or power limited technician 
 10.2   of record, all requests for inspection shall be signed by the 
 10.3   responsible master electrician or power limited technician of 
 10.4   record.  The designated responsible master electrician or power 
 10.5   limited technician of record shall be employed by the 
 10.6   individual, partnership, limited liability company, or 
 10.7   corporation which is applying for an electrical a contractor's 
 10.8   license and shall not be employed in any capacity as a licensed 
 10.9   electrician or licensed technician by any other electrical 
 10.10  contractor or employer designated in subdivision 12. 
 10.11     (c) All applications for electrical contractor's licenses 
 10.12  and all renewals shall include a verified statement that the 
 10.13  applicant or licensee has complied with this subdivision. 
 10.14     Sec. 17.  Minnesota Statutes 2000, section 326.242, 
 10.15  subdivision 7, is amended to read: 
 10.16     Subd. 7.  [EXAMINATION.] In addition to the requirements 
 10.17  imposed herein and except as herein otherwise provided, as a 
 10.18  precondition to issuance of an electrician's a personal license, 
 10.19  each applicant must pass a written or oral examination given by 
 10.20  the board to insure the competence of each applicant for 
 10.21  license.  An oral examination shall be administered only to an 
 10.22  applicant who furnishes a written statement from a certified 
 10.23  teacher or other professional, trained in the area of reading 
 10.24  disabilities stating that the applicant has a specific reading 
 10.25  disability which would prevent the applicant from performing 
 10.26  satisfactorily on a written test.  The oral examination shall be 
 10.27  structured so that an applicant who passes the examination will 
 10.28  not impair the applicant's own safety or that of others while 
 10.29  acting as an electrician a licensed person.  No person failing 
 10.30  an examination may retake it for six months thereafter, but 
 10.31  within such six months the person may take an examination for a 
 10.32  lesser grade of license.  Any licensee failing to renew a 
 10.33  license for two years or more after its expiration shall be 
 10.34  required to retake the examination before being issued a new 
 10.35  license. 
 10.36     An applicant for journeyman's or special electrician's 
 11.1   license who shall furnish evidence satisfactory to the board of 
 11.2   having the requisite experience, upon written application, 
 11.3   payment of the examination fee and fulfillment of all other 
 11.4   requirements stated herein, may work as a journeyman or special 
 11.5   electrician until the examination next following and the 
 11.6   announcement of the results of such latter examination by the 
 11.7   board. 
 11.8      An applicant for a personal license shall submit to the 
 11.9   board an application and examination fee at the time of 
 11.10  application.  Upon approval of the application, the board shall 
 11.11  schedule the applicant for the next available examination, which 
 11.12  shall be held within 60 days.  The applicant shall be allowed 
 11.13  one opportunity to reschedule an examination without being 
 11.14  required to submit another application and examination fee.  
 11.15  Additionally, an applicant who fails an examination, or whose 
 11.16  application has been disapproved, must submit another 
 11.17  application and examination fee. 
 11.18     Sec. 18.  Minnesota Statutes 2000, section 326.242, 
 11.19  subdivision 8, is amended to read: 
 11.20     Subd. 8.  [LICENSE AND RENEWAL FEES.] All licenses issued 
 11.21  hereunder shall expire in a manner as provided by the board.  
 11.22  Fees, as set by the board, shall be payable for examination, 
 11.23  issuance and renewal of the following: 
 11.24     (1) For examination: 
 11.25     Class A Master. 
 11.26     Class B Master. 
 11.27     Class A Journeyman, Class B Journeyman, Installer, Alarm 
 11.28  and Communications Contractor, Power Limited Technician, or 
 11.29  Special Electrician. 
 11.30     (2) For issuance of original license and renewal: 
 11.31     Class A Master. 
 11.32     Class B Master. 
 11.33     Power Limited Technician. 
 11.34     Class A Journeyman, Class B Journeyman, Installer, or 
 11.35  Special Electrician. 
 11.36     Electrical contractor. 
 12.1      Alarm and Communication System Contractor. 
 12.2      Technology Systems Contractor. 
 12.3      Sec. 19.  Minnesota Statutes 2000, section 326.242, 
 12.4   subdivision 10, is amended to read: 
 12.5      Subd. 10.  [CONTINUATION OF BUSINESS BY ESTATES.] Upon the 
 12.6   death of a master who is an electrical a contractor the board 
 12.7   may permit the decedent's representative to carry on the 
 12.8   business of the decedent for a period not in excess of six 
 12.9   months, for the purpose of completing work under contract or 
 12.10  otherwise to comply with sections 326.241 to 326.248.  The 
 12.11  representative shall give such bond as the board may require 
 12.12  conditioned upon the faithful and lawful performance of such 
 12.13  work and such bond shall be for the benefit of persons injured 
 12.14  or suffering financial loss by reason of failure of such 
 12.15  performance.  Such bond shall be written by a corporate surety 
 12.16  licensed to do business in the state of Minnesota.  Such 
 12.17  representative shall also comply with all public liability and 
 12.18  property damage insurance requirements imposed by this chapter 
 12.19  upon a licensed electrical contractor. 
 12.20     Sec. 20.  Minnesota Statutes 2000, section 326.242, 
 12.21  subdivision 12, is amended to read: 
 12.22     Subd. 12.  [EXEMPTIONS FROM LICENSING.] (a) A maintenance 
 12.23  electrician who is supervised by the responsible master 
 12.24  electrician for an electrical a contractor who has contracted 
 12.25  with the maintenance electrician's employer to provide services 
 12.26  for which an electrical a contractor's license is required or by 
 12.27  a master electrician or an electrical engineer registered with 
 12.28  the board and who is an employee of an employer and is engaged 
 12.29  in the maintenance, and repair of electrical equipment, 
 12.30  apparatus, and facilities owned or leased by the employer, and 
 12.31  performed within the limits of property which is owned or leased 
 12.32  and operated and maintained by said employer, shall not be 
 12.33  required to hold or obtain a license under sections 326.241 to 
 12.34  326.248; or 
 12.35     (b) Employees of a licensed alarm and communication 
 12.36  electrical or technology systems contractor or other employer 
 13.1   where provided with supervision by a master electrician in 
 13.2   accordance with subdivision 1, or power limited technician in 
 13.3   accordance with subdivision 3d, paragraph (a), clause (1), are 
 13.4   not required to hold a license under sections 326.241 to 326.248 
 13.5   while performing work authorized to be conducted by an alarm and 
 13.6   communication contractor for the planning, laying out, 
 13.7   installing, altering, and repairing of technology circuits or 
 13.8   systems except planning, laying out, or installing: 
 13.9      (1) class 2 or class 3 remote control circuits that control 
 13.10  circuits or systems other than class 2 or class 3 for the 
 13.11  purpose of environmental control, temperature control, 
 13.12  refrigeration, and process control, except circuits that 
 13.13  interconnect these systems with systems exempted by this 
 13.14  paragraph; 
 13.15     (2) class 2 or class 3 circuits in electrical cabinets, 
 13.16  enclosures, or devices containing physically unprotected 
 13.17  circuits other than class 2 or class 3; or 
 13.18     (3) technology circuits and systems in hazardous classified 
 13.19  locations as covered by chapter 5 of the National Electrical 
 13.20  Code; or 
 13.21     (c) Companies and their employees that plan, lay out, 
 13.22  install, alter, or repair class 2 and class 3 remote control 
 13.23  wiring associated with plug or cord and plug connected 
 13.24  appliances or systems other than security or fire alarm systems 
 13.25  installed in a residential dwelling are not required to hold a 
 13.26  license under sections 326.241 to 326.248; or 
 13.27     (c) (d) Employees of any electric, communications, or 
 13.28  railway utility, cable communications company as defined in 
 13.29  section 238.02, or a telephone company as defined under section 
 13.30  237.01 or its employees, or of any independent contractor 
 13.31  performing work on behalf of any such utility, cable 
 13.32  communications company, or telephone company, shall not be 
 13.33  required to hold a license under sections 326.241 to 326.248: 
 13.34     1.  While performing work on installations, materials, or 
 13.35  equipment which are owned or leased, and operated and maintained 
 13.36  by such utility, cable communications company, or telephone 
 14.1   company in the exercise of its utility, antenna, or telephone 
 14.2   function, and which 
 14.3      (i) are used exclusively for the generation, 
 14.4   transformation, distribution, transmission, or metering of 
 14.5   electric current, or the operation of railway signals, or the 
 14.6   transmission of intelligence and do not have as a principal 
 14.7   function the consumption or use of electric current or provided 
 14.8   service by or for the benefit of any person other than such 
 14.9   utility, cable communications, or telephone company, and 
 14.10     (ii) are generally accessible only to employees of such 
 14.11  utility, cable communications, or telephone company or persons 
 14.12  acting under its control or direction, and 
 14.13     (iii) are not on the load side of the meter service point 
 14.14  or point of entrance; or 
 14.15     2.  While performing work on installations, materials, or 
 14.16  equipment which are a part of the street lighting operations of 
 14.17  such utility; or 
 14.18     3.  While installing or performing work on outdoor area 
 14.19  lights which are directly connected to a utility's distribution 
 14.20  system and located upon the utility's distribution poles, and 
 14.21  which are generally accessible only to employees of such utility 
 14.22  or persons acting under its control or direction; or 
 14.23     (d) (e) An owner shall not be required to hold or obtain a 
 14.24  license under sections 326.241 to 326.248. 
 14.25     Sec. 21.  Minnesota Statutes 2000, section 326.2421, 
 14.26  subdivision 2, is amended to read: 
 14.27     Subd. 2.  [EXEMPTION.] Except as provided in subdivision 3, 
 14.28  No person or company exempt under subdivision 1 or licensed 
 14.29  pursuant to subdivision 3 section 326.242, subdivision 4 or 6, 
 14.30  may be required to obtain any authorization, permit, franchise, 
 14.31  or license from, or pay any fee, franchise tax, or other 
 14.32  assessment to, any agency, department, board, or political 
 14.33  subdivision of the state as a condition for performing any work 
 14.34  described herein.  The requirements of this section shall not 
 14.35  apply to telephone companies as defined under section 237.01 nor 
 14.36  to their employees, that are only engaged in the laying out, 
 15.1   installation, and repair of telephone systems. 
 15.2      Sec. 22.  Minnesota Statutes 2000, section 326.2421, 
 15.3   subdivision 9, is amended to read: 
 15.4      Subd. 9.  [LIMITATION.] Nothing in this section prohibits a 
 15.5   unit of local government from charging a franchise fee to the 
 15.6   operator of a cable communications system company as defined in 
 15.7   section 238.02. 
 15.8      Sec. 23.  Minnesota Statutes 2000, section 326.243, is 
 15.9   amended to read: 
 15.10     326.243 [SAFETY STANDARDS.] 
 15.11     All electrical wiring, apparatus and equipment for electric 
 15.12  light, heat and power, alarm and communication technology 
 15.13  circuits or systems shall comply with the rules of the 
 15.14  department of public service, the commissioner of commerce, or 
 15.15  the department of labor and industry, as applicable, and be 
 15.16  installed in conformity with accepted standards of construction 
 15.17  for safety to life and property.  For the purposes of this 
 15.18  chapter, the rules and safety standards stated at the time the 
 15.19  work is done in the then most recently published edition of the 
 15.20  National Electrical Code as adopted by the National Fire 
 15.21  Protection Association, Inc. and approved by the American 
 15.22  National Standards Institute, and the National Electrical Safety 
 15.23  Code as published by the Institute of Electrical and Electronics 
 15.24  Engineers, Inc. and approved by the American National Standards 
 15.25  Institute, shall be prima facie evidence of accepted standards 
 15.26  of construction for safety to life and property; provided 
 15.27  further, that in the event a Minnesota Building Code is 
 15.28  formulated pursuant to section 16B.61, containing approved 
 15.29  methods of electrical construction for safety to life and 
 15.30  property, compliance with said methods of electrical 
 15.31  construction of said Minnesota Building Code shall also 
 15.32  constitute compliance with this section, and provided further, 
 15.33  that nothing herein contained shall prohibit any political 
 15.34  subdivision from making and enforcing more stringent 
 15.35  requirements than set forth herein and such requirements shall 
 15.36  be complied with by all licensed electricians working within the 
 16.1   jurisdiction of such political subdivisions.  
 16.2      Sec. 24.  Minnesota Statutes 2000, section 326.244, 
 16.3   subdivision 1a, is amended to read: 
 16.4      Subd. 1a.  [ALARM AND COMMUNICATION TECHNOLOGY SYSTEMS.] (a)
 16.5   The installation of fire alarm systems as defined in article 760 
 16.6   of the National Electrical Code, the following technology 
 16.7   circuits or systems except minor work performed by a contractor, 
 16.8   must be inspected as provided in this section for compliance 
 16.9   with the applicable provisions of articles 725, 760, 770, 800, 
 16.10  810, and 820 of the most recent edition of the National 
 16.11  Electrical Code and the applicable provisions of the National 
 16.12  Electrical Safety Code, as those codes were approved by the 
 16.13  American National Standards Institute: 
 16.14     (1) remote control circuits controlling class 2 or class 3 
 16.15  remote control circuits that control circuits or systems other 
 16.16  than class 2 or class 3 for the purpose of environmental 
 16.17  control, temperature control, refrigeration, process control, 
 16.18  and indoor lighting, except circuits that interconnect these 
 16.19  systems exempted by section 326.242, subdivision 12, paragraph 
 16.20  (b), other than fire alarm; class 2 or class 3 circuits in 
 16.21  electrical cabinets, enclosures, or devices containing 
 16.22  physically unprotected circuits other than class 2 or class 3; 
 16.23  or technology circuits and systems in hazardous classified 
 16.24  locations as covered by chapter 5 of the National Electrical 
 16.25  Code; 
 16.26     (2) fire alarm systems as defined in article 760 of the 
 16.27  National Electrical Code; 
 16.28     (3) critical health and medical facilities, including, but 
 16.29  not limited to, anesthesia and resuscitative alarm and alerting 
 16.30  systems, medical monitoring, and nurse call systems; 
 16.31     (4) process control systems used for automated production 
 16.32  or process functions in manufacturing plants; and 
 16.33     (5) physical security systems within detention facilities. 
 16.34     (c) For the purposes of this subdivision "minor work" means 
 16.35  the adjustment or repair and replacement of worn or defective 
 16.36  parts of an alarm or communication a technology circuit or 
 17.1   system.  Minor work may be inspected under this section at the 
 17.2   request of the owner of the property or the person doing the 
 17.3   work. 
 17.4      (d) Notwithstanding this subdivision, if an electrical 
 17.5   inspector in the course of doing another inspection in a 
 17.6   building observes that an alarm and communication a contractor, 
 17.7   employer, or owner has not complied with accepted standards when 
 17.8   the work was performed, as provided in the most recent editions 
 17.9   of the National Electrical Code and the National Electrical 
 17.10  Safety Code as approved by the American National Standards 
 17.11  Institute, the inspector may order the contractor, employer, or 
 17.12  owner who has performed the work to file a request for 
 17.13  electrical inspection, pay an inspection fee, and make any 
 17.14  necessary repairs to comply with applicable standards and 
 17.15  require that the work be inspected. 
 17.16     Sec. 25.  Minnesota Statutes 2000, section 326.244, 
 17.17  subdivision 2, is amended to read: 
 17.18     Subd. 2.  [PROCEDURE.] (a) At or before commencement of any 
 17.19  installation required to be inspected by the board, the 
 17.20  electrical contractor, installer, special electrician, or owner 
 17.21  making the installation shall submit to the board a request for 
 17.22  inspection, in a form prescribed by the board, together with the 
 17.23  fees required for the installation.  
 17.24     (b) The fees required are a handling fee and an inspection 
 17.25  fee.  The handling fee shall be set by the board in an amount 
 17.26  sufficient to pay the cost of printing and handling the form 
 17.27  requesting an inspection.  The inspection fee shall be set by 
 17.28  the board in an amount sufficient to pay the actual costs of the 
 17.29  inspection and the board's costs in administering the 
 17.30  inspection.  All fees shall be set pursuant to the procedure of 
 17.31  sections 14.001 to 14.69.  
 17.32     (c) If the inspector finds that the installation is not in 
 17.33  compliance with accepted standards of construction for safety to 
 17.34  life and property as required by section 326.243, the inspector 
 17.35  shall by written order condemn the installation or noncomplying 
 17.36  portion thereof, or order service to the installation 
 18.1   disconnected, and shall send a copy of the order to the board.  
 18.2   If the installation or the noncomplying part will seriously and 
 18.3   proximately endanger human life and property, the order of the 
 18.4   inspector, when approved by the inspector's superior, shall 
 18.5   require immediate condemnation or disconnection.  In all other 
 18.6   cases, the order of the inspector shall permit a reasonable 
 18.7   opportunity for the installation to be brought into compliance 
 18.8   with accepted standards of construction for safety to life and 
 18.9   property prior to the effective time established for 
 18.10  condemnation or disconnection. 
 18.11     (d) Copies of each condemnation or disconnection order 
 18.12  shall be served personally or by mail upon the property owner, 
 18.13  and the electrical contractor, installer, or special electrician 
 18.14  making the installation, and other persons as the board by rule 
 18.15  may direct.  An aggrieved party may appeal any condemnation or 
 18.16  disconnection order by filing with the board a notice of appeal 
 18.17  within ten days after (1) service upon the aggrieved party of 
 18.18  the condemnation or disconnection order, if this service is 
 18.19  required, or (2) filing of the order with the board, whichever 
 18.20  is later.  The appeal shall proceed and the order of the 
 18.21  inspector shall have the effect the order, by its terms, and the 
 18.22  rules of the board provides.  The board shall adopt rules 
 18.23  providing procedures for the conduct of appeals, including 
 18.24  provisions for the stay of enforcement of the order of the 
 18.25  inspector pending such appeal when justified by the 
 18.26  circumstances. 
 18.27     Sec. 26.  Minnesota Statutes 2000, section 326.244, 
 18.28  subdivision 5, is amended to read: 
 18.29     Subd. 5.  [EXEMPTIONS FROM INSPECTIONS.] Installations, 
 18.30  materials, or equipment shall not be subject to inspection under 
 18.31  sections 326.241 to 326.248: 
 18.32     (1) when owned or leased, operated and maintained by any 
 18.33  employer whose maintenance electricians are exempt from 
 18.34  licensing under sections 326.241 to 326.248, while performing 
 18.35  electrical maintenance work only as defined by board rule; 
 18.36     (2) when owned or leased, and operated and maintained by 
 19.1   any electric, communications or railway utility or telephone 
 19.2   company in the exercise of its utility or telephone function; 
 19.3   and 
 19.4      (i) are used exclusively for the generations, 
 19.5   transformation, distribution, transmission, or metering of 
 19.6   electric current, or the operation of railway signals, or the 
 19.7   transmission of intelligence, and do not have as a principal 
 19.8   function the consumption or use of electric current by or for 
 19.9   the benefit of any person other than such utility or telephone 
 19.10  company; and 
 19.11     (ii) are generally accessible only to employees of such 
 19.12  utility or telephone company or persons acting under its control 
 19.13  or direction; and 
 19.14     (iii) are not on the load side of the meter service point 
 19.15  or point of entrance; 
 19.16     (3) when used in the street lighting operations of an 
 19.17  electric utility; 
 19.18     (4) when used as outdoor area lights which are owned and 
 19.19  operated by an electric utility and which are connected directly 
 19.20  to its distribution system and located upon the utility's 
 19.21  distribution poles, and which are generally accessible only to 
 19.22  employees of such utility or persons acting under its control or 
 19.23  direction; 
 19.24     (5) when the installation, material, and equipment are 
 19.25  alarm or communication systems laid out, installed, or 
 19.26  maintained within residential units not larger than a duplex; 
 19.27     (6) when the installation, material, and equipment are in 
 19.28  facilities subject to the jurisdiction of the federal Mine 
 19.29  Safety and Health Act; or 
 19.30     (7) (6) when the installation, material, and equipment is 
 19.31  part of an elevator installation for which the elevator 
 19.32  contractor, licensed under section 326.242, is required to 
 19.33  obtain a permit from the authority having jurisdiction as 
 19.34  provided by section 16B.747, and the inspection has been or will 
 19.35  be performed by an elevator inspector certified by the 
 19.36  department of administration and licensed by the board of 
 20.1   electricity.  This exemption shall apply only to installations, 
 20.2   material, and equipment permitted or required to be connected on 
 20.3   the load side of the disconnecting means required for elevator 
 20.4   equipment under National Electric Code Article 620, and elevator 
 20.5   communications and alarm systems within the machine room, car, 
 20.6   hoistway, or elevator lobby. 
 20.7      Sec. 27.  Minnesota Statutes 2000, section 326.244, 
 20.8   subdivision 6, is amended to read: 
 20.9      Subd. 6.  [SITE INSPECTIONS.] The board may, without 
 20.10  advance notice, inspect any site at which electrical work is 
 20.11  being performed or has been performed or where records 
 20.12  concerning the performance of electrical work are kept for 
 20.13  purposes of ensuring compliance with sections 326.241 to 326.248 
 20.14  or any rule or order adopted or issued under these sections.  
 20.15  With respect to electrical work performed at or records kept in 
 20.16  an occupied private dwelling, all inspections permitted by this 
 20.17  subdivision shall occur during normal business hours and shall 
 20.18  be preceded by advance notice, which need not be in writing.  
 20.19  The board shall have the authority to examine and copy all 
 20.20  records concerning the performance of electrical work and to 
 20.21  question in private all persons employed by an electrical a 
 20.22  contractor or on the site.  No person shall retaliate in any 
 20.23  manner against any employee or person who is questioned by, 
 20.24  cooperates with, or provides information to the board, its 
 20.25  complaint committee, or the attorney general. 
 20.26     Sec. 28.  [TERMS FOR TECHNOLOGY SYSTEMS CONTRACTORS AND 
 20.27  POWER LIMITED TECHNICIANS.] 
 20.28     The term of one of the power limited contractors appointed 
 20.29  under Minnesota Statutes, section 326.241, subdivision 1, shall 
 20.30  expire after two years.  That person's successor shall be 
 20.31  appointed for a four-year term. 
 20.32     Sec. 29.  [INSTRUCTION TO REVISOR.] 
 20.33     The revisor shall delete the term "alarm and communication,"
 20.34  "alarm and communication system contractor," or "alarm and 
 20.35  communication contractor" from Minnesota Statutes, sections 
 20.36  299M.03, 326.242, 326.243, and 326.244 and the citation to 
 21.1   section 326.2421 from Minnesota Statutes, section 299M.03. 
 21.2      Sec. 30.  [REPEALER.] 
 21.3      (a) Minnesota Statutes 2000, sections 326.01, subdivision 
 21.4   6d; and 326.2421, subdivisions 3, 4, 6, and 8, are repealed. 
 21.5      (b) Minnesota Rules, part 3800.3500, subpart 12, is 
 21.6   repealed.