Skip to main content Skip to office menu Skip to footer
Capital IconMinnesota Legislature

SF 2331

as introduced - 89th Legislature (2015 - 2016) Posted on 04/07/2016 09:46am

KEY: stricken = removed, old language.
underscored = added, new language.

Current Version - as introduced

Line numbers 1.1 1.2 1.3 1.4
1.5 1.6 1.7 1.8 1.9 1.10 1.11 1.12 1.13 1.14 1.15 1.16 1.17 1.18 1.19 1.20 1.21 1.22 1.23 1.24 2.1 2.2 2.3 2.4 2.5 2.6 2.7 2.8 2.9 2.10 2.11 2.12 2.13 2.14 2.15 2.16 2.17 2.18 2.19 2.20 2.21 2.22 2.23 2.24 2.25 2.26 2.27 2.28 2.29 2.30 2.31 2.32 2.33 2.34 2.35 2.36 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 3.20 3.21 3.22 3.23 3.24 3.25 3.26 3.27 3.28 3.29 3.30 3.31
3.32

A bill for an act
relating to boilers; modifying an exception to certain boiler laws; amending
Minnesota Statutes 2015 Supplement, section 326B.988.

BE IT ENACTED BY THE LEGISLATURE OF THE STATE OF MINNESOTA:

Section 1.

Minnesota Statutes 2015 Supplement, section 326B.988, is amended to read:


326B.988 EXCEPTIONS.

(a) The provisions of sections 326B.95 to 326B.998 shall not apply to:

(1) boilers and pressure vessels in buildings occupied solely for residence purposes
with accommodations for not more than five families;

(2) railroad locomotives operated by railroad companies for transportation purposes;

(3) air tanks installed on the right-of-way of railroads and used directly in the
operation of trains;

(4) boilers and pressure vessels under the direct jurisdiction of the United States;

(5) unfired pressure vessels having an internal or external working pressure not
exceeding 15 psig with no limit on size;

(6) pressure vessels used for storage of compressed air not exceeding five cubic feet
in volume and equipped with an ASME code stamped safety valve set at a maximum of
100 psig;

(7) pressure vessels having an inside diameter not exceeding six inches;

(8) every vessel that contains water under pressure, including those containing air
that serves only as a cushion, whose design pressure does not exceed 300 psig and whose
design temperature does not exceed 210 degrees Fahrenheit;

(9) boiler or pressure vessels located on farms used solely for agricultural or
horticultural purposes; for purposes of this section, boilers used for mint oil extraction
are considered used for agricultural or horticultural purposes, provided that the owner or
lessee complies with the inspection requirements contained in section 326B.958;

(10) tanks or cylinders used for storage or transfer of liquefied petroleum gases;

(11) unfired pressure vessels in petroleum refineries;

(12) an air tank or pressure vessel which is an integral part of a passenger motor
bus, truck, or trailer;

(13) hot water heating and other hot liquid boilers not exceeding a heat input of
750,000 BTU per hour;

(14) hot water supply boilers (water heaters) not exceeding a heat input of 500,000
BTU per hour, a water temperature of 210 degrees Fahrenheit, a nominal water capacity
of 120 gallons, or a pressure of 160 psig;

(15) a laundry and dry cleaning press not exceeding five cubic feet of steam volume;

(16) pressure vessels operated full of water or other liquid not materially more
hazardous than water, if the vessel's contents' temperature does not exceed 210 degrees
Fahrenheit or a pressure of 200 psig;

(17) steam-powered turbines at papermaking facilities which are powered by steam
generated by steam facilities at a remote location;

(18) manually fired boilers for model locomotive, boat, tractor, stationary engine,
or antique motor vehicles constructed or maintained only as a hobby for exhibition,
educational or historical purposes and not for commercial use, if the boilers have an
inside diameter of 12 inches or less, or a grate area of two square feet or less, and are
equipped with an ASME stamped safety valve of adequate size, a water level indicator,
and a pressure gauge;

(19) any pressure vessel used as an integral part of an electrical circuit breaker;

(20) pressure vessels used for the storage of refrigerant if they are built to ASME
code specifications, registered with the national board, and equipped with an ASME
code-stamped pressure-relieving device set no higher than the maximum allowable
working pressure of the vessel. This does not include pressure vessels used in ammonia
refrigeration systems;

(21) pressure vessels used for the storage of oxygen, nitrogen, helium, carbon dioxide,
argon, nitrous oxide, or other medical gas, provided the vessel is constructed to ASME
or Minnesota Department of Transportation specifications and equipped with an ASME
code-stamped pressure-relieving device. The owner of the vessels shall perform annual
visual inspections and planned maintenance on these vessels to ensure vessel integrity;

(22) pressure vessels used for the storage of compressed air for self-contained
breathing apparatuses;

(23) hot water heating or other hot liquid boilers vented directly to the atmosphere;
and

(24) pressure vessels used for the storage of compressed air not exceeding 1.5 cubic
feet (11.22 gallons) in volume with a maximum allowable working pressure of 600 psi or
less.

(b) An engineer's license is not required for hot water supply boilers.

(c) An engineer's license and annual inspection by the department is not required
for boilers, steam cookers, steam kettles, steam sterilizers or other steam generators not
exceeding 100,000 BTU per hour input, 25 kilowatt, and a pressure of 15 psig.

(d) Electric boilers not exceeding a maximum working pressure of 50 psig,
maximum of 30 kilowatt input or three horsepower rating shall be inspected as pressure
vessels and shall not require an engineer license to operate.

(e) Sawmills, located in a county with a population of less than 8,000 according to
the last federal census and that utilize steam for the drying of lumber, are not required to
meet the high pressure boiler attendance requirements set forth in Minnesota Rules, part
5225.1180, only if all of the following conditions are met:

(1) the owner complies with the inspection requirements under section 326B.958,
and the licensing requirements under section 326B.972; and

(2) the boiler:

(i) is equipped with electronic control systems that are remotely operated but which
require on-site manual reset of system faults;

(ii) is remotely monitored for log water levels, boiler pressure, and steam flow;

(iii) has automatic safety mechanisms built into the remote monitoring systems that
send an alarm upon detection of a fault condition, and an on-site alarm that will sound
upon detection of a fault condition and which may be heard at a distance of 500 feet;

(iv) has a water treatment program that is supervised by a third party water treatment
company; and

(v) is attended on site by a licensed boiler operator at least two times in a 24-hour
period. If the boiler is not attended more than twice in a 24-hour period, the period
between checks must not be less than eight hours.

deleted text begin This paragraph expires August 1, 2016.
deleted text end

new text begin EFFECTIVE DATE. new text end

new text begin This section is effective the day following final enactment.
new text end